summaryrefslogtreecommitdiff
path: root/drivers/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd')
-rw-r--r--drivers/mfd/Kconfig23
-rw-r--r--drivers/mfd/Makefile1
-rw-r--r--drivers/mfd/aat2870-core.c2
-rw-r--r--drivers/mfd/cros_ec_dev.c2
-rw-r--r--drivers/mfd/da9062-core.c44
-rw-r--r--drivers/mfd/dln2.c30
-rw-r--r--drivers/mfd/intel-lpss-pci.c31
-rw-r--r--drivers/mfd/iqs62x.c1063
-rw-r--r--drivers/mfd/omap-usb-host.c2
-rw-r--r--drivers/mfd/omap-usb-tll.c4
-rw-r--r--drivers/mfd/qcom-pm8xxx.c2
-rw-r--r--drivers/mfd/rk808.c139
-rw-r--r--drivers/mfd/rn5t618.c109
-rw-r--r--drivers/mfd/sprd-sc27xx-spi.c52
14 files changed, 1379 insertions, 125 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2b203290e7b9..0a59249198d3 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -642,6 +642,19 @@ config MFD_IPAQ_MICRO
AT90LS8535 microcontroller flashed with a special iPAQ
firmware using the custom protocol implemented in this driver.
+config MFD_IQS62X
+ tristate "Azoteq IQS620A/621/622/624/625 core support"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Say Y here if you want to build core support for the Azoteq IQS620A,
+ IQS621, IQS622, IQS624 and IQS625 multi-function sensors. Additional
+ options must be selected to enable device-specific functions.
+
+ To compile this driver as a module, choose M here: the module will
+ be called iqs62x.
+
config MFD_JANZ_CMODIO
tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
select MFD_CORE
@@ -893,6 +906,7 @@ config MFD_CPCAP
tristate "Support for Motorola CPCAP"
depends on SPI
depends on OF || COMPILE_TEST
+ select MFD_CORE
select REGMAP_SPI
select REGMAP_IRQ
help
@@ -1058,6 +1072,7 @@ config MFD_RN5T618
depends on OF
select MFD_CORE
select REGMAP_I2C
+ select REGMAP_IRQ
help
Say yes here to add support for the Ricoh RN5T567,
RN5T618, RC5T619 PMIC.
@@ -1201,7 +1216,7 @@ config AB8500_CORE
chip. This connects to U8500 either on the SSP/SPI bus (deprecated
since hardware version v1.0) or the I2C bus via PRCMU. It also adds
the irq_chip parts for handling the Mixed Signal chip events.
- This chip embeds various other multimedia funtionalities as well.
+ This chip embeds various other multimedia functionalities as well.
config AB8500_DEBUG
bool "Enable debug info via debugfs"
@@ -1851,7 +1866,7 @@ config MFD_WM8994
has on board GPIO and regulator functionality which is
supported via the relevant subsystems. This driver provides
core support for the WM8994, in order to use the actual
- functionaltiy of the device other drivers must be enabled.
+ functionality of the device other drivers must be enabled.
config MFD_WM97xx
tristate "Wolfson Microelectronics WM97xx"
@@ -1864,7 +1879,7 @@ config MFD_WM97xx
designed for smartphone applications. As well as audio functionality
it has on board GPIO and a touchscreen functionality which is
supported via the relevant subsystems. This driver provides core
- support for the WM97xx, in order to use the actual functionaltiy of
+ support for the WM97xx, in order to use the actual functionality of
the device other drivers must be enabled.
config MFD_STW481X
@@ -1957,7 +1972,7 @@ config MFD_STPMIC1
Support for ST Microelectronics STPMIC1 PMIC. STPMIC1 has power on
key, watchdog and regulator functionalities which are supported via
the relevant subsystems. This driver provides core support for the
- STPMIC1. In order to use the actual functionaltiy of the device other
+ STPMIC1. In order to use the actual functionality of the device other
drivers must be enabled.
To compile this driver as a module, choose M here: the
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b83f172545e1..f935d10cbf0f 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -226,6 +226,7 @@ obj-$(CONFIG_MFD_AS3711) += as3711.o
obj-$(CONFIG_MFD_AS3722) += as3722.o
obj-$(CONFIG_MFD_STW481X) += stw481x.o
obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
+obj-$(CONFIG_MFD_IQS62X) += iqs62x.o
obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o
diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
index 78ee4b28fca2..a17cf759739d 100644
--- a/drivers/mfd/aat2870-core.c
+++ b/drivers/mfd/aat2870-core.c
@@ -221,7 +221,7 @@ static ssize_t aat2870_dump_reg(struct aat2870_data *aat2870, char *buf)
count += sprintf(buf, "aat2870 registers\n");
for (addr = 0; addr < AAT2870_REG_NUM; addr++) {
- count += sprintf(buf + count, "0x%02x: ", addr);
+ count += snprintf(buf + count, PAGE_SIZE - count, "0x%02x: ", addr);
if (count >= PAGE_SIZE - 1)
break;
diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index 39e611695053..32c2b912b58b 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -211,7 +211,7 @@ static int ec_device_probe(struct platform_device *pdev)
* explicitly added on platforms that don't have the PD notifier ACPI
* device entry defined.
*/
- if (IS_ENABLED(CONFIG_OF)) {
+ if (IS_ENABLED(CONFIG_OF) && ec->ec_dev->dev->of_node) {
if (cros_ec_check_features(ec, EC_FEATURE_USB_PD)) {
retval = mfd_add_hotplug_devices(ec->dev,
cros_usbpd_notify_cells,
diff --git a/drivers/mfd/da9062-core.c b/drivers/mfd/da9062-core.c
index 419c73533401..fc30726e2e27 100644
--- a/drivers/mfd/da9062-core.c
+++ b/drivers/mfd/da9062-core.c
@@ -21,6 +21,9 @@
#define DA9062_REG_EVENT_B_OFFSET 1
#define DA9062_REG_EVENT_C_OFFSET 2
+#define DA9062_IRQ_LOW 0
+#define DA9062_IRQ_HIGH 1
+
static struct regmap_irq da9061_irqs[] = {
/* EVENT A */
[DA9061_IRQ_ONKEY] = {
@@ -369,6 +372,33 @@ static int da9062_get_device_type(struct da9062 *chip)
return ret;
}
+static u32 da9062_configure_irq_type(struct da9062 *chip, int irq, u32 *trigger)
+{
+ u32 irq_type = 0;
+ struct irq_data *irq_data = irq_get_irq_data(irq);
+
+ if (!irq_data) {
+ dev_err(chip->dev, "Invalid IRQ: %d\n", irq);
+ return -EINVAL;
+ }
+ *trigger = irqd_get_trigger_type(irq_data);
+
+ switch (*trigger) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ irq_type = DA9062_IRQ_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ irq_type = DA9062_IRQ_LOW;
+ break;
+ default:
+ dev_warn(chip->dev, "Unsupported IRQ type: %d\n", *trigger);
+ return -EINVAL;
+ }
+ return regmap_update_bits(chip->regmap, DA9062AA_CONFIG_A,
+ DA9062AA_IRQ_TYPE_MASK,
+ irq_type << DA9062AA_IRQ_TYPE_SHIFT);
+}
+
static const struct regmap_range da9061_aa_readable_ranges[] = {
regmap_reg_range(DA9062AA_PAGE_CON, DA9062AA_STATUS_B),
regmap_reg_range(DA9062AA_STATUS_D, DA9062AA_EVENT_C),
@@ -388,6 +418,7 @@ static const struct regmap_range da9061_aa_readable_ranges[] = {
regmap_reg_range(DA9062AA_VBUCK1_A, DA9062AA_VBUCK4_A),
regmap_reg_range(DA9062AA_VBUCK3_A, DA9062AA_VBUCK3_A),
regmap_reg_range(DA9062AA_VLDO1_A, DA9062AA_VLDO4_A),
+ regmap_reg_range(DA9062AA_CONFIG_A, DA9062AA_CONFIG_A),
regmap_reg_range(DA9062AA_VBUCK1_B, DA9062AA_VBUCK4_B),
regmap_reg_range(DA9062AA_VBUCK3_B, DA9062AA_VBUCK3_B),
regmap_reg_range(DA9062AA_VLDO1_B, DA9062AA_VLDO4_B),
@@ -417,6 +448,7 @@ static const struct regmap_range da9061_aa_writeable_ranges[] = {
regmap_reg_range(DA9062AA_VBUCK1_A, DA9062AA_VBUCK4_A),
regmap_reg_range(DA9062AA_VBUCK3_A, DA9062AA_VBUCK3_A),
regmap_reg_range(DA9062AA_VLDO1_A, DA9062AA_VLDO4_A),
+ regmap_reg_range(DA9062AA_CONFIG_A, DA9062AA_CONFIG_A),
regmap_reg_range(DA9062AA_VBUCK1_B, DA9062AA_VBUCK4_B),
regmap_reg_range(DA9062AA_VBUCK3_B, DA9062AA_VBUCK3_B),
regmap_reg_range(DA9062AA_VLDO1_B, DA9062AA_VLDO4_B),
@@ -596,6 +628,7 @@ static int da9062_i2c_probe(struct i2c_client *i2c,
const struct regmap_irq_chip *irq_chip;
const struct regmap_config *config;
int cell_num;
+ u32 trigger_type = 0;
int ret;
chip = devm_kzalloc(&i2c->dev, sizeof(*chip), GFP_KERNEL);
@@ -654,10 +687,15 @@ static int da9062_i2c_probe(struct i2c_client *i2c,
if (ret)
return ret;
+ ret = da9062_configure_irq_type(chip, i2c->irq, &trigger_type);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to configure IRQ type\n");
+ return ret;
+ }
+
ret = regmap_add_irq_chip(chip->regmap, i2c->irq,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
- -1, irq_chip,
- &chip->regmap_irq);
+ trigger_type | IRQF_SHARED | IRQF_ONESHOT,
+ -1, irq_chip, &chip->regmap_irq);
if (ret) {
dev_err(chip->dev, "Failed to request IRQ %d: %d\n",
i2c->irq, ret);
diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c
index 7841c11411d0..39276fa626d2 100644
--- a/drivers/mfd/dln2.c
+++ b/drivers/mfd/dln2.c
@@ -90,6 +90,11 @@ struct dln2_mod_rx_slots {
spinlock_t lock;
};
+enum dln2_endpoint {
+ DLN2_EP_OUT = 0,
+ DLN2_EP_IN = 1,
+};
+
struct dln2_dev {
struct usb_device *usb_dev;
struct usb_interface *interface;
@@ -640,35 +645,56 @@ static int dln2_start_rx_urbs(struct dln2_dev *dln2, gfp_t gfp)
return 0;
}
+enum {
+ DLN2_ACPI_MATCH_GPIO = 0,
+ DLN2_ACPI_MATCH_I2C = 1,
+ DLN2_ACPI_MATCH_SPI = 2,
+};
+
static struct dln2_platform_data dln2_pdata_gpio = {
.handle = DLN2_HANDLE_GPIO,
};
+static struct mfd_cell_acpi_match dln2_acpi_match_gpio = {
+ .adr = DLN2_ACPI_MATCH_GPIO,
+};
+
/* Only one I2C port seems to be supported on current hardware */
static struct dln2_platform_data dln2_pdata_i2c = {
.handle = DLN2_HANDLE_I2C,
.port = 0,
};
+static struct mfd_cell_acpi_match dln2_acpi_match_i2c = {
+ .adr = DLN2_ACPI_MATCH_I2C,
+};
+
/* Only one SPI port supported */
static struct dln2_platform_data dln2_pdata_spi = {
.handle = DLN2_HANDLE_SPI,
.port = 0,
};
+static struct mfd_cell_acpi_match dln2_acpi_match_spi = {
+ .adr = DLN2_ACPI_MATCH_SPI,
+};
+
static const struct mfd_cell dln2_devs[] = {
{
.name = "dln2-gpio",
+ .acpi_match = &dln2_acpi_match_gpio,
.platform_data = &dln2_pdata_gpio,
.pdata_size = sizeof(struct dln2_platform_data),
},
{
.name = "dln2-i2c",
+ .acpi_match = &dln2_acpi_match_i2c,
.platform_data = &dln2_pdata_i2c,
.pdata_size = sizeof(struct dln2_platform_data),
},
{
.name = "dln2-spi",
+ .acpi_match = &dln2_acpi_match_spi,
.platform_data = &dln2_pdata_spi,
.pdata_size = sizeof(struct dln2_platform_data),
},
@@ -733,10 +759,10 @@ static int dln2_probe(struct usb_interface *interface,
hostif->desc.bNumEndpoints < 2)
return -ENODEV;
- epin = &hostif->endpoint[0].desc;
- epout = &hostif->endpoint[1].desc;
+ epout = &hostif->endpoint[DLN2_EP_OUT].desc;
if (!usb_endpoint_is_bulk_out(epout))
return -ENODEV;
+ epin = &hostif->endpoint[DLN2_EP_IN].desc;
if (!usb_endpoint_is_bulk_in(epin))
return -ENODEV;
diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c
index c40a6c7d0cf8..7fc0c5d4edff 100644
--- a/drivers/mfd/intel-lpss-pci.c
+++ b/drivers/mfd/intel-lpss-pci.c
@@ -139,6 +139,11 @@ static const struct intel_lpss_platform_info cnl_i2c_info = {
.properties = spt_i2c_properties,
};
+static const struct intel_lpss_platform_info ehl_i2c_info = {
+ .clk_rate = 100000000,
+ .properties = bxt_i2c_properties,
+};
+
static const struct pci_device_id intel_lpss_pci_ids[] = {
/* CML-LP */
{ PCI_VDEVICE(INTEL, 0x02a8), (kernel_ulong_t)&spt_uart_info },
@@ -231,15 +236,15 @@ static const struct pci_device_id intel_lpss_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0x4b2a), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x4b2b), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x4b37), (kernel_ulong_t)&bxt_info },
- { PCI_VDEVICE(INTEL, 0x4b44), (kernel_ulong_t)&bxt_i2c_info },
- { PCI_VDEVICE(INTEL, 0x4b45), (kernel_ulong_t)&bxt_i2c_info },
- { PCI_VDEVICE(INTEL, 0x4b4b), (kernel_ulong_t)&bxt_i2c_info },
- { PCI_VDEVICE(INTEL, 0x4b4c), (kernel_ulong_t)&bxt_i2c_info },
+ { PCI_VDEVICE(INTEL, 0x4b44), (kernel_ulong_t)&ehl_i2c_info },
+ { PCI_VDEVICE(INTEL, 0x4b45), (kernel_ulong_t)&ehl_i2c_info },
+ { PCI_VDEVICE(INTEL, 0x4b4b), (kernel_ulong_t)&ehl_i2c_info },
+ { PCI_VDEVICE(INTEL, 0x4b4c), (kernel_ulong_t)&ehl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x4b4d), (kernel_ulong_t)&bxt_uart_info },
- { PCI_VDEVICE(INTEL, 0x4b78), (kernel_ulong_t)&bxt_i2c_info },
- { PCI_VDEVICE(INTEL, 0x4b79), (kernel_ulong_t)&bxt_i2c_info },
- { PCI_VDEVICE(INTEL, 0x4b7a), (kernel_ulong_t)&bxt_i2c_info },
- { PCI_VDEVICE(INTEL, 0x4b7b), (kernel_ulong_t)&bxt_i2c_info },
+ { PCI_VDEVICE(INTEL, 0x4b78), (kernel_ulong_t)&ehl_i2c_info },
+ { PCI_VDEVICE(INTEL, 0x4b79), (kernel_ulong_t)&ehl_i2c_info },
+ { PCI_VDEVICE(INTEL, 0x4b7a), (kernel_ulong_t)&ehl_i2c_info },
+ { PCI_VDEVICE(INTEL, 0x4b7b), (kernel_ulong_t)&ehl_i2c_info },
/* JSL */
{ PCI_VDEVICE(INTEL, 0x4da8), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0x4da9), (kernel_ulong_t)&spt_uart_info },
@@ -347,6 +352,16 @@ static const struct pci_device_id intel_lpss_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0xa36a), (kernel_ulong_t)&cnl_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa36b), (kernel_ulong_t)&cnl_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa37b), (kernel_ulong_t)&spt_info },
+ /* CML-V */
+ { PCI_VDEVICE(INTEL, 0xa3a7), (kernel_ulong_t)&spt_uart_info },
+ { PCI_VDEVICE(INTEL, 0xa3a8), (kernel_ulong_t)&spt_uart_info },
+ { PCI_VDEVICE(INTEL, 0xa3a9), (kernel_ulong_t)&spt_info },
+ { PCI_VDEVICE(INTEL, 0xa3aa), (kernel_ulong_t)&spt_info },
+ { PCI_VDEVICE(INTEL, 0xa3e0), (kernel_ulong_t)&spt_i2c_info },
+ { PCI_VDEVICE(INTEL, 0xa3e1), (kernel_ulong_t)&spt_i2c_info },
+ { PCI_VDEVICE(INTEL, 0xa3e2), (kernel_ulong_t)&spt_i2c_info },
+ { PCI_VDEVICE(INTEL, 0xa3e3), (kernel_ulong_t)&spt_i2c_info },
+ { PCI_VDEVICE(INTEL, 0xa3e6), (kernel_ulong_t)&spt_uart_info },
{ }
};
MODULE_DEVICE_TABLE(pci, intel_lpss_pci_ids);
diff --git a/drivers/mfd/iqs62x.c b/drivers/mfd/iqs62x.c
new file mode 100644
index 000000000000..af764bc87d7c
--- /dev/null
+++ b/drivers/mfd/iqs62x.c
@@ -0,0 +1,1063 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620A/621/622/624/625 Multi-Function Sensors
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ *
+ * These devices rely on application-specific register settings and calibration
+ * data developed in and exported from a suite of GUIs offered by the vendor. A
+ * separate tool converts the GUIs' ASCII-based output into a standard firmware
+ * file parsed by the driver.
+ *
+ * Link to datasheets and GUIs: https://www.azoteq.com/
+ *
+ * Link to conversion tool: https://github.com/jlabundy/iqs62x-h2bin.git
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+#define IQS62X_PROD_NUM 0x00
+
+#define IQS62X_SYS_FLAGS 0x10
+#define IQS62X_SYS_FLAGS_IN_ATI BIT(2)
+
+#define IQS620_HALL_FLAGS 0x16
+#define IQS621_HALL_FLAGS 0x19
+#define IQS622_HALL_FLAGS IQS621_HALL_FLAGS
+
+#define IQS624_INTERVAL_NUM 0x18
+#define IQS625_INTERVAL_NUM 0x12
+
+#define IQS622_PROX_SETTINGS_4 0x48
+#define IQS620_PROX_SETTINGS_4 0x50
+#define IQS620_PROX_SETTINGS_4_SAR_EN BIT(7)
+
+#define IQS621_ALS_CAL_DIV_LUX 0x82
+#define IQS621_ALS_CAL_DIV_IR 0x83
+
+#define IQS620_TEMP_CAL_MULT 0xC2
+#define IQS620_TEMP_CAL_DIV 0xC3
+#define IQS620_TEMP_CAL_OFFS 0xC4
+
+#define IQS62X_SYS_SETTINGS 0xD0
+#define IQS62X_SYS_SETTINGS_SOFT_RESET BIT(7)
+#define IQS62X_SYS_SETTINGS_ACK_RESET BIT(6)
+#define IQS62X_SYS_SETTINGS_EVENT_MODE BIT(5)
+#define IQS62X_SYS_SETTINGS_CLK_DIV BIT(4)
+#define IQS62X_SYS_SETTINGS_REDO_ATI BIT(1)
+
+#define IQS62X_PWR_SETTINGS 0xD2
+#define IQS62X_PWR_SETTINGS_DIS_AUTO BIT(5)
+#define IQS62X_PWR_SETTINGS_PWR_MODE_MASK (BIT(4) | BIT(3))
+#define IQS62X_PWR_SETTINGS_PWR_MODE_HALT (BIT(4) | BIT(3))
+#define IQS62X_PWR_SETTINGS_PWR_MODE_NORM 0
+
+#define IQS62X_OTP_CMD 0xF0
+#define IQS62X_OTP_CMD_FG3 0x13
+#define IQS62X_OTP_DATA 0xF1
+#define IQS62X_MAX_REG 0xFF
+
+#define IQS62X_HALL_CAL_MASK GENMASK(3, 0)
+
+#define IQS62X_FW_REC_TYPE_INFO 0
+#define IQS62X_FW_REC_TYPE_PROD 1
+#define IQS62X_FW_REC_TYPE_HALL 2
+#define IQS62X_FW_REC_TYPE_MASK 3
+#define IQS62X_FW_REC_TYPE_DATA 4
+
+#define IQS62X_ATI_POLL_SLEEP_US 10000
+#define IQS62X_ATI_POLL_TIMEOUT_US 500000
+#define IQS62X_ATI_STABLE_DELAY_MS 150
+
+struct iqs62x_fw_rec {
+ u8 type;
+ u8 addr;
+ u8 len;
+ u8 data;
+} __packed;
+
+struct iqs62x_fw_blk {
+ struct list_head list;
+ u8 addr;
+ u8 mask;
+ u8 len;
+ u8 data[];
+};
+
+struct iqs62x_info {
+ u8 prod_num;
+ u8 sw_num;
+ u8 hw_num;
+} __packed;
+
+static int iqs62x_dev_init(struct iqs62x_core *iqs62x)
+{
+ struct iqs62x_fw_blk *fw_blk;
+ unsigned int val;
+ int ret;
+ u8 clk_div = 1;
+
+ list_for_each_entry(fw_blk, &iqs62x->fw_blk_head, list) {
+ if (fw_blk->mask)
+ ret = regmap_update_bits(iqs62x->regmap, fw_blk->addr,
+ fw_blk->mask, *fw_blk->data);
+ else
+ ret = regmap_raw_write(iqs62x->regmap, fw_blk->addr,
+ fw_blk->data, fw_blk->len);
+ if (ret)
+ return ret;
+ }
+
+ switch (iqs62x->dev_desc->prod_num) {
+ case IQS620_PROD_NUM:
+ case IQS622_PROD_NUM:
+ ret = regmap_read(iqs62x->regmap,
+ iqs62x->dev_desc->prox_settings, &val);
+ if (ret)
+ return ret;
+
+ if (val & IQS620_PROX_SETTINGS_4_SAR_EN)
+ iqs62x->ui_sel = IQS62X_UI_SAR1;
+
+ /* fall through */
+
+ case IQS621_PROD_NUM:
+ ret = regmap_write(iqs62x->regmap, IQS620_GLBL_EVENT_MASK,
+ IQS620_GLBL_EVENT_MASK_PMU |
+ iqs62x->dev_desc->prox_mask |
+ iqs62x->dev_desc->sar_mask |
+ iqs62x->dev_desc->hall_mask |
+ iqs62x->dev_desc->hyst_mask |
+ iqs62x->dev_desc->temp_mask |
+ iqs62x->dev_desc->als_mask |
+ iqs62x->dev_desc->ir_mask);
+ if (ret)
+ return ret;
+ break;
+
+ default:
+ ret = regmap_write(iqs62x->regmap, IQS624_HALL_UI,
+ IQS624_HALL_UI_WHL_EVENT |
+ IQS624_HALL_UI_INT_EVENT |
+ IQS624_HALL_UI_AUTO_CAL);
+ if (ret)
+ return ret;
+
+ /*
+ * The IQS625 default interval divider is below the minimum
+ * permissible value, and the datasheet mandates that it is
+ * corrected during initialization (unless an updated value
+ * has already been provided by firmware).
+ *
+ * To protect against an unacceptably low user-entered value
+ * stored in the firmware, the same check is extended to the
+ * IQS624 as well.
+ */
+ ret = regmap_read(iqs62x->regmap, IQS624_INTERVAL_DIV, &val);
+ if (ret)
+ return ret;
+
+ if (val >= iqs62x->dev_desc->interval_div)
+ break;
+
+ ret = regmap_write(iqs62x->regmap, IQS624_INTERVAL_DIV,
+ iqs62x->dev_desc->interval_div);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_read(iqs62x->regmap, IQS62X_SYS_SETTINGS, &val);
+ if (ret)
+ return ret;
+
+ if (val & IQS62X_SYS_SETTINGS_CLK_DIV)
+ clk_div = iqs62x->dev_desc->clk_div;
+
+ ret = regmap_write(iqs62x->regmap, IQS62X_SYS_SETTINGS, val |
+ IQS62X_SYS_SETTINGS_ACK_RESET |
+ IQS62X_SYS_SETTINGS_EVENT_MODE |
+ IQS62X_SYS_SETTINGS_REDO_ATI);
+ if (ret)
+ return ret;
+
+ ret = regmap_read_poll_timeout(iqs62x->regmap, IQS62X_SYS_FLAGS, val,
+ !(val & IQS62X_SYS_FLAGS_IN_ATI),
+ IQS62X_ATI_POLL_SLEEP_US,
+ IQS62X_ATI_POLL_TIMEOUT_US * clk_div);
+ if (ret)
+ return ret;
+
+ msleep(IQS62X_ATI_STABLE_DELAY_MS * clk_div);
+
+ return 0;
+}
+
+static int iqs62x_firmware_parse(struct iqs62x_core *iqs62x,
+ const struct firmware *fw)
+{
+ struct i2c_client *client = iqs62x->client;
+ struct iqs62x_fw_rec *fw_rec;
+ struct iqs62x_fw_blk *fw_blk;
+ unsigned int val;
+ size_t pos = 0;
+ int ret = 0;
+ u8 mask, len, *data;
+ u8 hall_cal_index = 0;
+
+ while (pos < fw->size) {
+ if (pos + sizeof(*fw_rec) > fw->size) {
+ ret = -EINVAL;
+ break;
+ }
+ fw_rec = (struct iqs62x_fw_rec *)(fw->data + pos);
+ pos += sizeof(*fw_rec);
+
+ if (pos + fw_rec->len - 1 > fw->size) {
+ ret = -EINVAL;
+ break;
+ }
+ pos += fw_rec->len - 1;
+
+ switch (fw_rec->type) {
+ case IQS62X_FW_REC_TYPE_INFO:
+ continue;
+
+ case IQS62X_FW_REC_TYPE_PROD:
+ if (fw_rec->data == iqs62x->dev_desc->prod_num)
+ continue;
+
+ dev_err(&client->dev,
+ "Incompatible product number: 0x%02X\n",
+ fw_rec->data);
+ ret = -EINVAL;
+ break;
+
+ case IQS62X_FW_REC_TYPE_HALL:
+ if (!hall_cal_index) {
+ ret = regmap_write(iqs62x->regmap,
+ IQS62X_OTP_CMD,
+ IQS62X_OTP_CMD_FG3);
+ if (ret)
+ break;
+
+ ret = regmap_read(iqs62x->regmap,
+ IQS62X_OTP_DATA, &val);
+ if (ret)
+ break;
+
+ hall_cal_index = val & IQS62X_HALL_CAL_MASK;
+ if (!hall_cal_index) {
+ dev_err(&client->dev,
+ "Uncalibrated device\n");
+ ret = -ENODATA;
+ break;
+ }
+ }
+
+ if (hall_cal_index > fw_rec->len) {
+ ret = -EINVAL;
+ break;
+ }
+
+ mask = 0;
+ data = &fw_rec->data + hall_cal_index - 1;
+ len = sizeof(*data);
+ break;
+
+ case IQS62X_FW_REC_TYPE_MASK:
+ if (fw_rec->len < (sizeof(mask) + sizeof(*data))) {
+ ret = -EINVAL;
+ break;
+ }
+
+ mask = fw_rec->data;
+ data = &fw_rec->data + sizeof(mask);
+ len = sizeof(*data);
+ break;
+
+ case IQS62X_FW_REC_TYPE_DATA:
+ mask = 0;
+ data = &fw_rec->data;
+ len = fw_rec->len;
+ break;
+
+ default:
+ dev_err(&client->dev,
+ "Unrecognized record type: 0x%02X\n",
+ fw_rec->type);
+ ret = -EINVAL;
+ }
+
+ if (ret)
+ break;
+
+ fw_blk = devm_kzalloc(&client->dev,
+ struct_size(fw_blk, data, len),
+ GFP_KERNEL);
+ if (!fw_blk) {
+ ret = -ENOMEM;
+ break;
+ }
+
+ fw_blk->addr = fw_rec->addr;
+ fw_blk->mask = mask;
+ fw_blk->len = len;
+ memcpy(fw_blk->data, data, len);
+
+ list_add(&fw_blk->list, &iqs62x->fw_blk_head);
+ }
+
+ release_firmware(fw);
+
+ return ret;
+}
+
+const struct iqs62x_event_desc iqs62x_events[IQS62X_NUM_EVENTS] = {
+ [IQS62X_EVENT_PROX_CH0_T] = {
+ .reg = IQS62X_EVENT_PROX,
+ .mask = BIT(4),
+ .val = BIT(4),
+ },
+ [IQS62X_EVENT_PROX_CH0_P] = {
+ .reg = IQS62X_EVENT_PROX,
+ .mask = BIT(0),
+ .val = BIT(0),
+ },
+ [IQS62X_EVENT_PROX_CH1_T] = {
+ .reg = IQS62X_EVENT_PROX,
+ .mask = BIT(5),
+ .val = BIT(5),
+ },
+ [IQS62X_EVENT_PROX_CH1_P] = {
+ .reg = IQS62X_EVENT_PROX,
+ .mask = BIT(1),
+ .val = BIT(1),
+ },
+ [IQS62X_EVENT_PROX_CH2_T] = {
+ .reg = IQS62X_EVENT_PROX,
+ .mask = BIT(6),
+ .val = BIT(6),
+ },
+ [IQS62X_EVENT_PROX_CH2_P] = {
+ .reg = IQS62X_EVENT_PROX,
+ .mask = BIT(2),
+ .val = BIT(2),
+ },
+ [IQS62X_EVENT_HYST_POS_T] = {
+ .reg = IQS62X_EVENT_HYST,
+ .mask = BIT(6) | BIT(7),
+ .val = BIT(6),
+ },
+ [IQS62X_EVENT_HYST_POS_P] = {
+ .reg = IQS62X_EVENT_HYST,
+ .mask = BIT(5) | BIT(7),
+ .val = BIT(5),
+ },
+ [IQS62X_EVENT_HYST_NEG_T] = {
+ .reg = IQS62X_EVENT_HYST,
+ .mask = BIT(6) | BIT(7),
+ .val = BIT(6) | BIT(7),
+ },
+ [IQS62X_EVENT_HYST_NEG_P] = {
+ .reg = IQS62X_EVENT_HYST,
+ .mask = BIT(5) | BIT(7),
+ .val = BIT(5) | BIT(7),
+ },
+ [IQS62X_EVENT_SAR1_ACT] = {
+ .reg = IQS62X_EVENT_HYST,
+ .mask = BIT(4),
+ .val = BIT(4),
+ },
+ [IQS62X_EVENT_SAR1_QRD] = {
+ .reg = IQS62X_EVENT_HYST,
+ .mask = BIT(2),
+ .val = BIT(2),
+ },
+ [IQS62X_EVENT_SAR1_MOVE] = {
+ .reg = IQS62X_EVENT_HYST,
+ .mask = BIT(1),
+ .val = BIT(1),
+ },
+ [IQS62X_EVENT_SAR1_HALT] = {
+ .reg = IQS62X_EVENT_HYST,
+ .mask = BIT(0),
+ .val = BIT(0),
+ },
+ [IQS62X_EVENT_WHEEL_UP] = {
+ .reg = IQS62X_EVENT_WHEEL,
+ .mask = BIT(7) | BIT(6),
+ .val = BIT(7),
+ },
+ [IQS62X_EVENT_WHEEL_DN] = {
+ .reg = IQS62X_EVENT_WHEEL,
+ .mask = BIT(7) | BIT(6),
+ .val = BIT(7) | BIT(6),
+ },
+ [IQS62X_EVENT_HALL_N_T] = {
+ .reg = IQS62X_EVENT_HALL,
+ .mask = BIT(2) | BIT(0),
+ .val = BIT(2),
+ },
+ [IQS62X_EVENT_HALL_N_P] = {
+ .reg = IQS62X_EVENT_HALL,
+ .mask = BIT(1) | BIT(0),
+ .val = BIT(1),
+ },
+ [IQS62X_EVENT_HALL_S_T] = {
+ .reg = IQS62X_EVENT_HALL,
+ .mask = BIT(2) | BIT(0),
+ .val = BIT(2) | BIT(0),
+ },
+ [IQS62X_EVENT_HALL_S_P] = {
+ .reg = IQS62X_EVENT_HALL,
+ .mask = BIT(1) | BIT(0),
+ .val = BIT(1) | BIT(0),
+ },
+ [IQS62X_EVENT_SYS_RESET] = {
+ .reg = IQS62X_EVENT_SYS,
+ .mask = BIT(7),
+ .val = BIT(7),
+ },
+};
+EXPORT_SYMBOL_GPL(iqs62x_events);
+
+static irqreturn_t iqs62x_irq(int irq, void *context)
+{
+ struct iqs62x_core *iqs62x = context;
+ struct i2c_client *client = iqs62x->client;
+ struct iqs62x_event_data event_data;
+ struct iqs62x_event_desc event_desc;
+ enum iqs62x_event_reg event_reg;
+ unsigned long event_flags = 0;
+ int ret, i, j;
+ u8 event_map[IQS62X_EVENT_SIZE];
+
+ /*
+ * The device asserts the RDY output to signal the beginning of a
+ * communication window, which is closed by an I2C stop condition.
+ * As such, all interrupt status is captured in a single read and
+ * broadcast to any interested sub-device drivers.
+ */
+ ret = regmap_raw_read(iqs62x->regmap, IQS62X_SYS_FLAGS, event_map,
+ sizeof(event_map));
+ if (ret) {
+ dev_err(&client->dev, "Failed to read device status: %d\n",
+ ret);
+ return IRQ_NONE;
+ }
+
+ for (i = 0; i < sizeof(event_map); i++) {
+ event_reg = iqs62x->dev_desc->event_regs[iqs62x->ui_sel][i];
+
+ switch (event_reg) {
+ case IQS62X_EVENT_UI_LO:
+ event_data.ui_data = get_unaligned_le16(&event_map[i]);
+
+ /* fall through */
+
+ case IQS62X_EVENT_UI_HI:
+ case IQS62X_EVENT_NONE:
+ continue;
+
+ case IQS62X_EVENT_ALS:
+ event_data.als_flags = event_map[i];
+ continue;
+
+ case IQS62X_EVENT_IR:
+ event_data.ir_flags = event_map[i];
+ continue;
+
+ case IQS62X_EVENT_INTER:
+ event_data.interval = event_map[i];
+ continue;
+
+ case IQS62X_EVENT_HYST:
+ event_map[i] <<= iqs62x->dev_desc->hyst_shift;
+
+ /* fall through */
+
+ case IQS62X_EVENT_WHEEL:
+ case IQS62X_EVENT_HALL:
+ case IQS62X_EVENT_PROX:
+ case IQS62X_EVENT_SYS:
+ break;
+ }
+
+ for (j = 0; j < IQS62X_NUM_EVENTS; j++) {
+ event_desc = iqs62x_events[j];
+
+ if (event_desc.reg != event_reg)
+ continue;
+
+ if ((event_map[i] & event_desc.mask) == event_desc.val)
+ event_flags |= BIT(j);
+ }
+ }
+
+ /*
+ * The device resets itself in response to the I2C master stalling
+ * communication past a fixed timeout. In this case, all registers
+ * are restored and any interested sub-device drivers are notified.
+ */
+ if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
+ dev_err(&client->dev, "Unexpected device reset\n");
+
+ ret = iqs62x_dev_init(iqs62x);
+ if (ret) {
+ dev_err(&client->dev,
+ "Failed to re-initialize device: %d\n", ret);
+ return IRQ_NONE;
+ }
+ }
+
+ ret = blocking_notifier_call_chain(&iqs62x->nh, event_flags,
+ &event_data);
+ if (ret & NOTIFY_STOP_MASK)
+ return IRQ_NONE;
+
+ /*
+ * Once the communication window is closed, a small delay is added to
+ * ensure the device's RDY output has been deasserted by the time the
+ * interrupt handler returns.
+ */
+ usleep_range(50, 100);
+
+ return IRQ_HANDLED;
+}
+
+static void iqs62x_firmware_load(const struct firmware *fw, void *context)
+{
+ struct iqs62x_core *iqs62x = context;
+ struct i2c_client *client = iqs62x->client;
+ int ret;
+
+ if (fw) {
+ ret = iqs62x_firmware_parse(iqs62x, fw);
+ if (ret) {
+ dev_err(&client->dev, "Failed to parse firmware: %d\n",
+ ret);
+ goto err_out;
+ }
+ }
+
+ ret = iqs62x_dev_init(iqs62x);
+ if (ret) {
+ dev_err(&client->dev, "Failed to initialize device: %d\n", ret);
+ goto err_out;
+ }
+
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, iqs62x_irq, IRQF_ONESHOT,
+ client->name, iqs62x);
+ if (ret) {
+ dev_err(&client->dev, "Failed to request IRQ: %d\n", ret);
+ goto err_out;
+ }
+
+ ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+ iqs62x->dev_desc->sub_devs,
+ iqs62x->dev_desc->num_sub_devs,
+ NULL, 0, NULL);
+ if (ret)
+ dev_err(&client->dev, "Failed to add sub-devices: %d\n", ret);
+
+err_out:
+ complete_all(&iqs62x->fw_done);
+}
+
+static const struct mfd_cell iqs620at_sub_devs[] = {
+ {
+ .name = "iqs62x-keys",
+ .of_compatible = "azoteq,iqs620a-keys",
+ },
+ {
+ .name = "iqs620a-pwm",
+ .of_compatible = "azoteq,iqs620a-pwm",
+ },
+ { .name = "iqs620at-temp", },
+};
+
+static const struct mfd_cell iqs620a_sub_devs[] = {
+ {
+ .name = "iqs62x-keys",
+ .of_compatible = "azoteq,iqs620a-keys",
+ },
+ {
+ .name = "iqs620a-pwm",
+ .of_compatible = "azoteq,iqs620a-pwm",
+ },
+};
+
+static const struct mfd_cell iqs621_sub_devs[] = {
+ {
+ .name = "iqs62x-keys",
+ .of_compatible = "azoteq,iqs621-keys",
+ },
+ { .name = "iqs621-als", },
+};
+
+static const struct mfd_cell iqs622_sub_devs[] = {
+ {
+ .name = "iqs62x-keys",
+ .of_compatible = "azoteq,iqs622-keys",
+ },
+ { .name = "iqs621-als", },
+};
+
+static const struct mfd_cell iqs624_sub_devs[] = {
+ {
+ .name = "iqs62x-keys",
+ .of_compatible = "azoteq,iqs624-keys",
+ },
+ { .name = "iqs624-pos", },
+};
+
+static const struct mfd_cell iqs625_sub_devs[] = {
+ {
+ .name = "iqs62x-keys",
+ .of_compatible = "azoteq,iqs625-keys",
+ },
+ { .name = "iqs624-pos", },
+};
+
+static const u8 iqs620at_cal_regs[] = {
+ IQS620_TEMP_CAL_MULT,
+ IQS620_TEMP_CAL_DIV,
+ IQS620_TEMP_CAL_OFFS,
+};
+
+static const u8 iqs621_cal_regs[] = {
+ IQS621_ALS_CAL_DIV_LUX,
+ IQS621_ALS_CAL_DIV_IR,
+};
+
+static const enum iqs62x_event_reg iqs620a_event_regs[][IQS62X_EVENT_SIZE] = {
+ [IQS62X_UI_PROX] = {
+ IQS62X_EVENT_SYS, /* 0x10 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_PROX, /* 0x12 */
+ IQS62X_EVENT_HYST, /* 0x13 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_HALL, /* 0x16 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_NONE,
+ },
+ [IQS62X_UI_SAR1] = {
+ IQS62X_EVENT_SYS, /* 0x10 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_HYST, /* 0x13 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_HALL, /* 0x16 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_NONE,
+ },
+};
+
+static const enum iqs62x_event_reg iqs621_event_regs[][IQS62X_EVENT_SIZE] = {
+ [IQS62X_UI_PROX] = {
+ IQS62X_EVENT_SYS, /* 0x10 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_PROX, /* 0x12 */
+ IQS62X_EVENT_HYST, /* 0x13 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_ALS, /* 0x16 */
+ IQS62X_EVENT_UI_LO, /* 0x17 */
+ IQS62X_EVENT_UI_HI, /* 0x18 */
+ IQS62X_EVENT_HALL, /* 0x19 */
+ },
+};
+
+static const enum iqs62x_event_reg iqs622_event_regs[][IQS62X_EVENT_SIZE] = {
+ [IQS62X_UI_PROX] = {
+ IQS62X_EVENT_SYS, /* 0x10 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_PROX, /* 0x12 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_ALS, /* 0x14 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_IR, /* 0x16 */
+ IQS62X_EVENT_UI_LO, /* 0x17 */
+ IQS62X_EVENT_UI_HI, /* 0x18 */
+ IQS62X_EVENT_HALL, /* 0x19 */
+ },
+ [IQS62X_UI_SAR1] = {
+ IQS62X_EVENT_SYS, /* 0x10 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_HYST, /* 0x13 */
+ IQS62X_EVENT_ALS, /* 0x14 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_IR, /* 0x16 */
+ IQS62X_EVENT_UI_LO, /* 0x17 */
+ IQS62X_EVENT_UI_HI, /* 0x18 */
+ IQS62X_EVENT_HALL, /* 0x19 */
+ },
+};
+
+static const enum iqs62x_event_reg iqs624_event_regs[][IQS62X_EVENT_SIZE] = {
+ [IQS62X_UI_PROX] = {
+ IQS62X_EVENT_SYS, /* 0x10 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_PROX, /* 0x12 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_WHEEL, /* 0x14 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_UI_LO, /* 0x16 */
+ IQS62X_EVENT_UI_HI, /* 0x17 */
+ IQS62X_EVENT_INTER, /* 0x18 */
+ IQS62X_EVENT_NONE,
+ },
+};
+
+static const enum iqs62x_event_reg iqs625_event_regs[][IQS62X_EVENT_SIZE] = {
+ [IQS62X_UI_PROX] = {
+ IQS62X_EVENT_SYS, /* 0x10 */
+ IQS62X_EVENT_PROX, /* 0x11 */
+ IQS62X_EVENT_INTER, /* 0x12 */
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_NONE,
+ IQS62X_EVENT_NONE,
+ },
+};
+
+static const struct iqs62x_dev_desc iqs62x_devs[] = {
+ {
+ .dev_name = "iqs620at",
+ .sub_devs = iqs620at_sub_devs,
+ .num_sub_devs = ARRAY_SIZE(iqs620at_sub_devs),
+
+ .prod_num = IQS620_PROD_NUM,
+ .sw_num = 0x08,
+ .cal_regs = iqs620at_cal_regs,
+ .num_cal_regs = ARRAY_SIZE(iqs620at_cal_regs),
+
+ .prox_mask = BIT(0),
+ .sar_mask = BIT(1) | BIT(7),
+ .hall_mask = BIT(2),
+ .hyst_mask = BIT(3),
+ .temp_mask = BIT(4),
+
+ .prox_settings = IQS620_PROX_SETTINGS_4,
+ .hall_flags = IQS620_HALL_FLAGS,
+
+ .clk_div = 4,
+ .fw_name = "iqs620a.bin",
+ .event_regs = &iqs620a_event_regs[IQS62X_UI_PROX],
+ },
+ {
+ .dev_name = "iqs620a",
+ .sub_devs = iqs620a_sub_devs,
+ .num_sub_devs = ARRAY_SIZE(iqs620a_sub_devs),
+
+ .prod_num = IQS620_PROD_NUM,
+ .sw_num = 0x08,
+
+ .prox_mask = BIT(0),
+ .sar_mask = BIT(1) | BIT(7),
+ .hall_mask = BIT(2),
+ .hyst_mask = BIT(3),
+ .temp_mask = BIT(4),
+
+ .prox_settings = IQS620_PROX_SETTINGS_4,
+ .hall_flags = IQS620_HALL_FLAGS,
+
+ .clk_div = 4,
+ .fw_name = "iqs620a.bin",
+ .event_regs = &iqs620a_event_regs[IQS62X_UI_PROX],
+ },
+ {
+ .dev_name = "iqs621",
+ .sub_devs = iqs621_sub_devs,
+ .num_sub_devs = ARRAY_SIZE(iqs621_sub_devs),
+
+ .prod_num = IQS621_PROD_NUM,
+ .sw_num = 0x09,
+ .cal_regs = iqs621_cal_regs,
+ .num_cal_regs = ARRAY_SIZE(iqs621_cal_regs),
+
+ .prox_mask = BIT(0),
+ .hall_mask = BIT(1),
+ .als_mask = BIT(2),
+ .hyst_mask = BIT(3),
+ .temp_mask = BIT(4),
+
+ .als_flags = IQS621_ALS_FLAGS,
+ .hall_flags = IQS621_HALL_FLAGS,
+ .hyst_shift = 5,
+
+ .clk_div = 2,
+ .fw_name = "iqs621.bin",
+ .event_regs = &iqs621_event_regs[IQS62X_UI_PROX],
+ },
+ {
+ .dev_name = "iqs622",
+ .sub_devs = iqs622_sub_devs,
+ .num_sub_devs = ARRAY_SIZE(iqs622_sub_devs),
+
+ .prod_num = IQS622_PROD_NUM,
+ .sw_num = 0x06,
+
+ .prox_mask = BIT(0),
+ .sar_mask = BIT(1),
+ .hall_mask = BIT(2),
+ .als_mask = BIT(3),
+ .ir_mask = BIT(4),
+
+ .prox_settings = IQS622_PROX_SETTINGS_4,
+ .als_flags = IQS622_ALS_FLAGS,
+ .hall_flags = IQS622_HALL_FLAGS,
+
+ .clk_div = 2,
+ .fw_name = "iqs622.bin",
+ .event_regs = &iqs622_event_regs[IQS62X_UI_PROX],
+ },
+ {
+ .dev_name = "iqs624",
+ .sub_devs = iqs624_sub_devs,
+ .num_sub_devs = ARRAY_SIZE(iqs624_sub_devs),
+
+ .prod_num = IQS624_PROD_NUM,
+ .sw_num = 0x0B,
+
+ .interval = IQS624_INTERVAL_NUM,
+ .interval_div = 3,
+
+ .clk_div = 2,
+ .fw_name = "iqs624.bin",
+ .event_regs = &iqs624_event_regs[IQS62X_UI_PROX],
+ },
+ {
+ .dev_name = "iqs625",
+ .sub_devs = iqs625_sub_devs,
+ .num_sub_devs = ARRAY_SIZE(iqs625_sub_devs),
+
+ .prod_num = IQS625_PROD_NUM,
+ .sw_num = 0x0B,
+
+ .interval = IQS625_INTERVAL_NUM,
+ .interval_div = 10,
+
+ .clk_div = 2,
+ .fw_name = "iqs625.bin",
+ .event_regs = &iqs625_event_regs[IQS62X_UI_PROX],
+ },
+};
+
+static const struct regmap_config iqs62x_map_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = IQS62X_MAX_REG,
+};
+
+static int iqs62x_probe(struct i2c_client *client)
+{
+ struct iqs62x_core *iqs62x;
+ struct iqs62x_info info;
+ unsigned int val;
+ int ret, i, j;
+ u8 sw_num = 0;
+ const char *fw_name = NULL;
+
+ iqs62x = devm_kzalloc(&client->dev, sizeof(*iqs62x), GFP_KERNEL);
+ if (!iqs62x)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, iqs62x);
+ iqs62x->client = client;
+
+ BLOCKING_INIT_NOTIFIER_HEAD(&iqs62x->nh);
+ INIT_LIST_HEAD(&iqs62x->fw_blk_head);
+ init_completion(&iqs62x->fw_done);
+
+ iqs62x->regmap = devm_regmap_init_i2c(client, &iqs62x_map_config);
+ if (IS_ERR(iqs62x->regmap)) {
+ ret = PTR_ERR(iqs62x->regmap);
+ dev_err(&client->dev, "Failed to initialize register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = regmap_raw_read(iqs62x->regmap, IQS62X_PROD_NUM, &info,
+ sizeof(info));
+ if (ret)
+ return ret;
+
+ /*
+ * The following sequence validates the device's product and software
+ * numbers. It then determines if the device is factory-calibrated by
+ * checking for nonzero values in the device's designated calibration
+ * registers (if applicable). Depending on the device, the absence of
+ * calibration data indicates a reduced feature set or invalid device.
+ *
+ * For devices given in both calibrated and uncalibrated versions, the
+ * calibrated version (e.g. IQS620AT) appears first in the iqs62x_devs
+ * array. The uncalibrated version (e.g. IQS620A) appears next and has
+ * the same product and software numbers, but no calibration registers
+ * are specified.
+ */
+ for (i = 0; i < ARRAY_SIZE(iqs62x_devs); i++) {
+ if (info.prod_num != iqs62x_devs[i].prod_num)
+ continue;
+
+ iqs62x->dev_desc = &iqs62x_devs[i];
+
+ if (info.sw_num < iqs62x->dev_desc->sw_num)
+ continue;
+
+ sw_num = info.sw_num;
+
+ /*
+ * Read each of the device's designated calibration registers,
+ * if any, and exit from the inner loop early if any are equal
+ * to zero (indicating the device is uncalibrated). This could
+ * be acceptable depending on the device (e.g. IQS620A instead
+ * of IQS620AT).
+ */
+ for (j = 0; j < iqs62x->dev_desc->num_cal_regs; j++) {
+ ret = regmap_read(iqs62x->regmap,
+ iqs62x->dev_desc->cal_regs[j], &val);
+ if (ret)
+ return ret;
+
+ if (!val)
+ break;
+ }
+
+ /*
+ * If the number of nonzero values read from the device equals
+ * the number of designated calibration registers (which could
+ * be zero), exit from the outer loop early to signal that the
+ * device's product and software numbers match a known device,
+ * and the device is calibrated (if applicable).
+ */
+ if (j == iqs62x->dev_desc->num_cal_regs)
+ break;
+ }
+
+ if (!iqs62x->dev_desc) {
+ dev_err(&client->dev, "Unrecognized product number: 0x%02X\n",
+ info.prod_num);
+ return -EINVAL;
+ }
+
+ if (!sw_num) {
+ dev_err(&client->dev, "Unrecognized software number: 0x%02X\n",
+ info.sw_num);
+ return -EINVAL;
+ }
+
+ if (i == ARRAY_SIZE(iqs62x_devs)) {
+ dev_err(&client->dev, "Uncalibrated device\n");
+ return -ENODATA;
+ }
+
+ device_property_read_string(&client->dev, "firmware-name", &fw_name);
+
+ ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
+ fw_name ? : iqs62x->dev_desc->fw_name,
+ &client->dev, GFP_KERNEL, iqs62x,
+ iqs62x_firmware_load);
+ if (ret)
+ dev_err(&client->dev, "Failed to request firmware: %d\n", ret);
+
+ return ret;
+}
+
+static int iqs62x_remove(struct i2c_client *client)
+{
+ struct iqs62x_core *iqs62x = i2c_get_clientdata(client);
+
+ wait_for_completion(&iqs62x->fw_done);
+
+ return 0;
+}
+
+static int __maybe_unused iqs62x_suspend(struct device *dev)
+{
+ struct iqs62x_core *iqs62x = dev_get_drvdata(dev);
+ int ret;
+
+ wait_for_completion(&iqs62x->fw_done);
+
+ /*
+ * As per the datasheet, automatic mode switching must be disabled
+ * before the device is placed in or taken out of halt mode.
+ */
+ ret = regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
+ IQS62X_PWR_SETTINGS_DIS_AUTO, 0xFF);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
+ IQS62X_PWR_SETTINGS_PWR_MODE_MASK,
+ IQS62X_PWR_SETTINGS_PWR_MODE_HALT);
+}
+
+static int __maybe_unused iqs62x_resume(struct device *dev)
+{
+ struct iqs62x_core *iqs62x = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
+ IQS62X_PWR_SETTINGS_PWR_MODE_MASK,
+ IQS62X_PWR_SETTINGS_PWR_MODE_NORM);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(iqs62x->regmap, IQS62X_PWR_SETTINGS,
+ IQS62X_PWR_SETTINGS_DIS_AUTO, 0);
+}
+
+static SIMPLE_DEV_PM_OPS(iqs62x_pm, iqs62x_suspend, iqs62x_resume);
+
+static const struct of_device_id iqs62x_of_match[] = {
+ { .compatible = "azoteq,iqs620a" },
+ { .compatible = "azoteq,iqs621" },
+ { .compatible = "azoteq,iqs622" },
+ { .compatible = "azoteq,iqs624" },
+ { .compatible = "azoteq,iqs625" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, iqs62x_of_match);
+
+static struct i2c_driver iqs62x_i2c_driver = {
+ .driver = {
+ .name = "iqs62x",
+ .of_match_table = iqs62x_of_match,
+ .pm = &iqs62x_pm,
+ },
+ .probe_new = iqs62x_probe,
+ .remove = iqs62x_remove,
+};
+module_i2c_driver(iqs62x_i2c_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Multi-Function Sensors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 4798d9f3f9d5..1f4f01b02d98 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -840,7 +840,7 @@ MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids);
static struct platform_driver usbhs_omap_driver = {
.driver = {
- .name = (char *)usbhs_driver_name,
+ .name = usbhs_driver_name,
.pm = &usbhsomap_dev_pm_ops,
.of_match_table = usbhs_omap_dt_ids,
},
diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 265f5e350e1c..4b7f73c317e8 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -99,7 +99,7 @@
struct usbtll_omap {
void __iomem *base;
int nch; /* num. of channels */
- struct clk *ch_clk[0]; /* must be the last member */
+ struct clk *ch_clk[]; /* must be the last member */
};
/*-------------------------------------------------------------------------*/
@@ -304,7 +304,7 @@ MODULE_DEVICE_TABLE(of, usbtll_omap_dt_ids);
static struct platform_driver usbtll_omap_driver = {
.driver = {
- .name = (char *)usbtll_driver_name,
+ .name = usbtll_driver_name,
.of_match_table = usbtll_omap_dt_ids,
},
.probe = usbtll_omap_probe,
diff --git a/drivers/mfd/qcom-pm8xxx.c b/drivers/mfd/qcom-pm8xxx.c
index 29133326c6fd..acd172ddcbd6 100644
--- a/drivers/mfd/qcom-pm8xxx.c
+++ b/drivers/mfd/qcom-pm8xxx.c
@@ -76,7 +76,7 @@ struct pm_irq_chip {
unsigned int num_masters;
const struct pm_irq_data *pm_irq_data;
/* MUST BE AT THE END OF THIS STRUCT */
- u8 config[0];
+ u8 config[];
};
static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, unsigned int bp,
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index a69a6742ecdc..d109b9f14407 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -19,7 +19,6 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
-#include <linux/syscore_ops.h>
struct rk808_reg_data {
int addr;
@@ -186,7 +185,6 @@ static const struct rk808_reg_data rk805_pre_init_reg[] = {
{RK805_BUCK4_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
RK805_BUCK4_ILMAX_3500MA},
{RK805_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_400MA},
- {RK805_GPIO_IO_POL_REG, SLP_SD_MSK, SLEEP_FUN},
{RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
};
@@ -449,88 +447,60 @@ static const struct regmap_irq_chip rk818_irq_chip = {
static struct i2c_client *rk808_i2c_client;
-static void rk805_device_shutdown(void)
+static void rk808_pm_power_off(void)
{
int ret;
+ unsigned int reg, bit;
struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
- if (!rk808)
- return;
-
- ret = regmap_update_bits(rk808->regmap,
- RK805_DEV_CTRL_REG,
- DEV_OFF, DEV_OFF);
- if (ret)
- dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");
-}
-
-static void rk805_device_shutdown_prepare(void)
-{
- int ret;
- struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
-
- if (!rk808)
- return;
-
- ret = regmap_update_bits(rk808->regmap,
- RK805_GPIO_IO_POL_REG,
- SLP_SD_MSK, SHUTDOWN_FUN);
- if (ret)
- dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");
-}
-
-static void rk808_device_shutdown(void)
-{
- int ret;
- struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
-
- if (!rk808)
- return;
-
- ret = regmap_update_bits(rk808->regmap,
- RK808_DEVCTRL_REG,
- DEV_OFF_RST, DEV_OFF_RST);
- if (ret)
- dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");
-}
-
-static void rk818_device_shutdown(void)
-{
- int ret;
- struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
-
- if (!rk808)
+ switch (rk808->variant) {
+ case RK805_ID:
+ reg = RK805_DEV_CTRL_REG;
+ bit = DEV_OFF;
+ break;
+ case RK808_ID:
+ reg = RK808_DEVCTRL_REG,
+ bit = DEV_OFF_RST;
+ break;
+ case RK818_ID:
+ reg = RK818_DEVCTRL_REG;
+ bit = DEV_OFF;
+ break;
+ default:
return;
-
- ret = regmap_update_bits(rk808->regmap,
- RK818_DEVCTRL_REG,
- DEV_OFF, DEV_OFF);
+ }
+ ret = regmap_update_bits(rk808->regmap, reg, bit, bit);
if (ret)
dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");
}
-static void rk8xx_syscore_shutdown(void)
+static void rk8xx_shutdown(struct i2c_client *client)
{
- struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+ struct rk808 *rk808 = i2c_get_clientdata(client);
int ret;
- if (system_state == SYSTEM_POWER_OFF &&
- (rk808->variant == RK809_ID || rk808->variant == RK817_ID)) {
+ switch (rk808->variant) {
+ case RK805_ID:
+ ret = regmap_update_bits(rk808->regmap,
+ RK805_GPIO_IO_POL_REG,
+ SLP_SD_MSK,
+ SHUTDOWN_FUN);
+ break;
+ case RK809_ID:
+ case RK817_ID:
ret = regmap_update_bits(rk808->regmap,
RK817_SYS_CFG(3),
RK817_SLPPIN_FUNC_MSK,
SLPPIN_DN_FUN);
- if (ret) {
- dev_warn(&rk808_i2c_client->dev,
- "Cannot switch to power down function\n");
- }
+ break;
+ default:
+ return;
}
+ if (ret)
+ dev_warn(&client->dev,
+ "Cannot switch to power down function\n");
}
-static struct syscore_ops rk808_syscore_ops = {
- .shutdown = rk8xx_syscore_shutdown,
-};
-
static const struct of_device_id rk808_of_match[] = {
{ .compatible = "rockchip,rk805" },
{ .compatible = "rockchip,rk808" },
@@ -550,7 +520,7 @@ static int rk808_probe(struct i2c_client *client,
const struct mfd_cell *cells;
int nr_pre_init_regs;
int nr_cells;
- int pm_off = 0, msb, lsb;
+ int msb, lsb;
unsigned char pmic_id_msb, pmic_id_lsb;
int ret;
int i;
@@ -594,8 +564,6 @@ static int rk808_probe(struct i2c_client *client,
nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
cells = rk805s;
nr_cells = ARRAY_SIZE(rk805s);
- rk808->pm_pwroff_fn = rk805_device_shutdown;
- rk808->pm_pwroff_prep_fn = rk805_device_shutdown_prepare;
break;
case RK808_ID:
rk808->regmap_cfg = &rk808_regmap_config;
@@ -604,7 +572,6 @@ static int rk808_probe(struct i2c_client *client,
nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
cells = rk808s;
nr_cells = ARRAY_SIZE(rk808s);
- rk808->pm_pwroff_fn = rk808_device_shutdown;
break;
case RK818_ID:
rk808->regmap_cfg = &rk818_regmap_config;
@@ -613,7 +580,6 @@ static int rk808_probe(struct i2c_client *client,
nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
cells = rk818s;
nr_cells = ARRAY_SIZE(rk818s);
- rk808->pm_pwroff_fn = rk818_device_shutdown;
break;
case RK809_ID:
case RK817_ID:
@@ -623,7 +589,6 @@ static int rk808_probe(struct i2c_client *client,
nr_pre_init_regs = ARRAY_SIZE(rk817_pre_init_reg);
cells = rk817s;
nr_cells = ARRAY_SIZE(rk817s);
- register_syscore_ops(&rk808_syscore_ops);
break;
default:
dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
@@ -674,17 +639,9 @@ static int rk808_probe(struct i2c_client *client,
goto err_irq;
}
- pm_off = of_property_read_bool(np,
- "rockchip,system-power-controller");
- if (pm_off && !pm_power_off) {
+ if (of_property_read_bool(np, "rockchip,system-power-controller")) {
rk808_i2c_client = client;
- pm_power_off = rk808->pm_pwroff_fn;
- }
-
- if (pm_off && !pm_power_off_prepare) {
- if (!rk808_i2c_client)
- rk808_i2c_client = client;
- pm_power_off_prepare = rk808->pm_pwroff_prep_fn;
+ pm_power_off = rk808_pm_power_off;
}
return 0;
@@ -704,25 +661,24 @@ static int rk808_remove(struct i2c_client *client)
* pm_power_off may points to a function from another module.
* Check if the pointer is set by us and only then overwrite it.
*/
- if (rk808->pm_pwroff_fn && pm_power_off == rk808->pm_pwroff_fn)
+ if (pm_power_off == rk808_pm_power_off)
pm_power_off = NULL;
- /**
- * As above, check if the pointer is set by us before overwrite.
- */
- if (rk808->pm_pwroff_prep_fn &&
- pm_power_off_prepare == rk808->pm_pwroff_prep_fn)
- pm_power_off_prepare = NULL;
-
return 0;
}
static int __maybe_unused rk8xx_suspend(struct device *dev)
{
- struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+ struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev));
int ret = 0;
switch (rk808->variant) {
+ case RK805_ID:
+ ret = regmap_update_bits(rk808->regmap,
+ RK805_GPIO_IO_POL_REG,
+ SLP_SD_MSK,
+ SLEEP_FUN);
+ break;
case RK809_ID:
case RK817_ID:
ret = regmap_update_bits(rk808->regmap,
@@ -739,7 +695,7 @@ static int __maybe_unused rk8xx_suspend(struct device *dev)
static int __maybe_unused rk8xx_resume(struct device *dev)
{
- struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+ struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev));
int ret = 0;
switch (rk808->variant) {
@@ -766,6 +722,7 @@ static struct i2c_driver rk808_i2c_driver = {
},
.probe = rk808_probe,
.remove = rk808_remove,
+ .shutdown = rk8xx_shutdown,
};
module_i2c_driver(rk808_i2c_driver);
diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
index ead2e79036a9..232de50562f9 100644
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
@@ -8,10 +8,13 @@
#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/mfd/core.h>
#include <linux/mfd/rn5t618.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
@@ -20,6 +23,13 @@ static const struct mfd_cell rn5t618_cells[] = {
{ .name = "rn5t618-wdt" },
};
+static const struct mfd_cell rc5t619_cells[] = {
+ { .name = "rn5t618-adc" },
+ { .name = "rn5t618-regulator" },
+ { .name = "rc5t619-rtc" },
+ { .name = "rn5t618-wdt" },
+};
+
static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
@@ -32,6 +42,8 @@ static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
case RN5T618_IR_GPF:
case RN5T618_MON_IOIN:
case RN5T618_INTMON:
+ case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2:
+ case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR:
return true;
default:
return false;
@@ -46,9 +58,56 @@ static const struct regmap_config rn5t618_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};
+static const struct regmap_irq rc5t619_irqs[] = {
+ REGMAP_IRQ_REG(RN5T618_IRQ_SYS, 0, BIT(0)),
+ REGMAP_IRQ_REG(RN5T618_IRQ_DCDC, 0, BIT(1)),
+ REGMAP_IRQ_REG(RN5T618_IRQ_RTC, 0, BIT(2)),
+ REGMAP_IRQ_REG(RN5T618_IRQ_ADC, 0, BIT(3)),
+ REGMAP_IRQ_REG(RN5T618_IRQ_GPIO, 0, BIT(4)),
+ REGMAP_IRQ_REG(RN5T618_IRQ_CHG, 0, BIT(6)),
+};
+
+static const struct regmap_irq_chip rc5t619_irq_chip = {
+ .name = "rc5t619",
+ .irqs = rc5t619_irqs,
+ .num_irqs = ARRAY_SIZE(rc5t619_irqs),
+ .num_regs = 1,
+ .status_base = RN5T618_INTMON,
+ .mask_base = RN5T618_INTEN,
+ .mask_invert = true,
+};
+
static struct rn5t618 *rn5t618_pm_power_off;
static struct notifier_block rn5t618_restart_handler;
+static int rn5t618_irq_init(struct rn5t618 *rn5t618)
+{
+ const struct regmap_irq_chip *irq_chip = NULL;
+ int ret;
+
+ if (!rn5t618->irq)
+ return 0;
+
+ switch (rn5t618->variant) {
+ case RC5T619:
+ irq_chip = &rc5t619_irq_chip;
+ break;
+ default:
+ dev_err(rn5t618->dev, "Currently no IRQ support for variant %d\n",
+ (int)rn5t618->variant);
+ return -ENOENT;
+ }
+
+ ret = devm_regmap_add_irq_chip(rn5t618->dev, rn5t618->regmap,
+ rn5t618->irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ 0, irq_chip, &rn5t618->irq_data);
+ if (ret)
+ dev_err(rn5t618->dev, "Failed to register IRQ chip\n");
+
+ return ret;
+}
+
static void rn5t618_trigger_poweroff_sequence(bool repower)
{
/* disable automatic repower-on */
@@ -87,8 +146,7 @@ static const struct of_device_id rn5t618_of_match[] = {
};
MODULE_DEVICE_TABLE(of, rn5t618_of_match);
-static int rn5t618_i2c_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
+static int rn5t618_i2c_probe(struct i2c_client *i2c)
{
const struct of_device_id *of_id;
struct rn5t618 *priv;
@@ -106,6 +164,8 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, priv);
priv->variant = (long)of_id->data;
+ priv->irq = i2c->irq;
+ priv->dev = &i2c->dev;
priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
if (IS_ERR(priv->regmap)) {
@@ -114,8 +174,16 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
return ret;
}
- ret = devm_mfd_add_devices(&i2c->dev, -1, rn5t618_cells,
- ARRAY_SIZE(rn5t618_cells), NULL, 0, NULL);
+ if (priv->variant == RC5T619)
+ ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
+ rc5t619_cells,
+ ARRAY_SIZE(rc5t619_cells),
+ NULL, 0, NULL);
+ else
+ ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
+ rn5t618_cells,
+ ARRAY_SIZE(rn5t618_cells),
+ NULL, 0, NULL);
if (ret) {
dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
return ret;
@@ -138,7 +206,7 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
return ret;
}
- return 0;
+ return rn5t618_irq_init(priv);
}
static int rn5t618_i2c_remove(struct i2c_client *i2c)
@@ -155,19 +223,38 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c)
return 0;
}
-static const struct i2c_device_id rn5t618_i2c_id[] = {
- { }
-};
-MODULE_DEVICE_TABLE(i2c, rn5t618_i2c_id);
+static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
+{
+ struct rn5t618 *priv = dev_get_drvdata(dev);
+
+ if (priv->irq)
+ disable_irq(priv->irq);
+
+ return 0;
+}
+
+static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
+{
+ struct rn5t618 *priv = dev_get_drvdata(dev);
+
+ if (priv->irq)
+ enable_irq(priv->irq);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops,
+ rn5t618_i2c_suspend,
+ rn5t618_i2c_resume);
static struct i2c_driver rn5t618_i2c_driver = {
.driver = {
.name = "rn5t618",
.of_match_table = of_match_ptr(rn5t618_of_match),
+ .pm = &rn5t618_i2c_dev_pm_ops,
},
- .probe = rn5t618_i2c_probe,
+ .probe_new = rn5t618_i2c_probe,
.remove = rn5t618_i2c_remove,
- .id_table = rn5t618_i2c_id,
};
module_i2c_driver(rn5t618_i2c_driver);
diff --git a/drivers/mfd/sprd-sc27xx-spi.c b/drivers/mfd/sprd-sc27xx-spi.c
index c0529a1cd5ea..ebdf2f11ae28 100644
--- a/drivers/mfd/sprd-sc27xx-spi.c
+++ b/drivers/mfd/sprd-sc27xx-spi.c
@@ -10,6 +10,7 @@
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
+#include <uapi/linux/usb/charger.h>
#define SPRD_PMIC_INT_MASK_STATUS 0x0
#define SPRD_PMIC_INT_RAW_STATUS 0x4
@@ -17,6 +18,16 @@
#define SPRD_SC2731_IRQ_BASE 0x140
#define SPRD_SC2731_IRQ_NUMS 16
+#define SPRD_SC2731_CHG_DET 0xedc
+
+/* PMIC charger detection definition */
+#define SPRD_PMIC_CHG_DET_DELAY_US 200000
+#define SPRD_PMIC_CHG_DET_TIMEOUT 2000000
+#define SPRD_PMIC_CHG_DET_DONE BIT(11)
+#define SPRD_PMIC_SDP_TYPE BIT(7)
+#define SPRD_PMIC_DCP_TYPE BIT(6)
+#define SPRD_PMIC_CDP_TYPE BIT(5)
+#define SPRD_PMIC_CHG_TYPE_MASK GENMASK(7, 5)
struct sprd_pmic {
struct regmap *regmap;
@@ -24,12 +35,14 @@ struct sprd_pmic {
struct regmap_irq *irqs;
struct regmap_irq_chip irq_chip;
struct regmap_irq_chip_data *irq_data;
+ const struct sprd_pmic_data *pdata;
int irq;
};
struct sprd_pmic_data {
u32 irq_base;
u32 num_irqs;
+ u32 charger_det;
};
/*
@@ -40,8 +53,46 @@ struct sprd_pmic_data {
static const struct sprd_pmic_data sc2731_data = {
.irq_base = SPRD_SC2731_IRQ_BASE,
.num_irqs = SPRD_SC2731_IRQ_NUMS,
+ .charger_det = SPRD_SC2731_CHG_DET,
};
+enum usb_charger_type sprd_pmic_detect_charger_type(struct device *dev)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct sprd_pmic *ddata = spi_get_drvdata(spi);
+ const struct sprd_pmic_data *pdata = ddata->pdata;
+ enum usb_charger_type type;
+ u32 val;
+ int ret;
+
+ ret = regmap_read_poll_timeout(ddata->regmap, pdata->charger_det, val,
+ (val & SPRD_PMIC_CHG_DET_DONE),
+ SPRD_PMIC_CHG_DET_DELAY_US,
+ SPRD_PMIC_CHG_DET_TIMEOUT);
+ if (ret) {
+ dev_err(&spi->dev, "failed to detect charger type\n");
+ return UNKNOWN_TYPE;
+ }
+
+ switch (val & SPRD_PMIC_CHG_TYPE_MASK) {
+ case SPRD_PMIC_CDP_TYPE:
+ type = CDP_TYPE;
+ break;
+ case SPRD_PMIC_DCP_TYPE:
+ type = DCP_TYPE;
+ break;
+ case SPRD_PMIC_SDP_TYPE:
+ type = SDP_TYPE;
+ break;
+ default:
+ type = UNKNOWN_TYPE;
+ break;
+ }
+
+ return type;
+}
+EXPORT_SYMBOL_GPL(sprd_pmic_detect_charger_type);
+
static const struct mfd_cell sprd_pmic_devs[] = {
{
.name = "sc27xx-wdt",
@@ -181,6 +232,7 @@ static int sprd_pmic_probe(struct spi_device *spi)
spi_set_drvdata(spi, ddata);
ddata->dev = &spi->dev;
ddata->irq = spi->irq;
+ ddata->pdata = pdata;
ddata->irq_chip.name = dev_name(&spi->dev);
ddata->irq_chip.status_base =
generated by cgit (git 2.34.1) at 2024-06-01 19:56:51 +0000