summaryrefslogtreecommitdiff
path: root/drivers/misc/mic/host/mic_x100.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/mic/host/mic_x100.c')
-rw-r--r--drivers/misc/mic/host/mic_x100.c585
1 files changed, 0 insertions, 585 deletions
diff --git a/drivers/misc/mic/host/mic_x100.c b/drivers/misc/mic/host/mic_x100.c
deleted file mode 100644
index f5536c1ad607..000000000000
--- a/drivers/misc/mic/host/mic_x100.c
+++ /dev/null
@@ -1,585 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel MIC Platform Software Stack (MPSS)
- *
- * Copyright(c) 2013 Intel Corporation.
- *
- * Intel MIC Host driver.
- */
-#include <linux/fs.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/firmware.h>
-#include <linux/delay.h>
-
-#include "../common/mic_dev.h"
-#include "mic_device.h"
-#include "mic_x100.h"
-#include "mic_smpt.h"
-
-static const u16 mic_x100_intr_init[] = {
- MIC_X100_DOORBELL_IDX_START,
- MIC_X100_DMA_IDX_START,
- MIC_X100_ERR_IDX_START,
- MIC_X100_NUM_DOORBELL,
- MIC_X100_NUM_DMA,
- MIC_X100_NUM_ERR,
-};
-
-/**
- * mic_x100_write_spad - write to the scratchpad register
- * @mdev: pointer to mic_device instance
- * @idx: index to the scratchpad register, 0 based
- * @val: the data value to put into the register
- *
- * This function allows writing of a 32bit value to the indexed scratchpad
- * register.
- *
- * RETURNS: none.
- */
-static void
-mic_x100_write_spad(struct mic_device *mdev, unsigned int idx, u32 val)
-{
- dev_dbg(&mdev->pdev->dev, "Writing 0x%x to scratch pad index %d\n",
- val, idx);
- mic_mmio_write(&mdev->mmio, val,
- MIC_X100_SBOX_BASE_ADDRESS +
- MIC_X100_SBOX_SPAD0 + idx * 4);
-}
-
-/**
- * mic_x100_read_spad - read from the scratchpad register
- * @mdev: pointer to mic_device instance
- * @idx: index to scratchpad register, 0 based
- *
- * This function allows reading of the 32bit scratchpad register.
- *
- * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
- */
-static u32
-mic_x100_read_spad(struct mic_device *mdev, unsigned int idx)
-{
- u32 val = mic_mmio_read(&mdev->mmio,
- MIC_X100_SBOX_BASE_ADDRESS +
- MIC_X100_SBOX_SPAD0 + idx * 4);
-
- dev_dbg(&mdev->pdev->dev,
- "Reading 0x%x from scratch pad index %d\n", val, idx);
- return val;
-}
-
-/**
- * mic_x100_enable_interrupts - Enable interrupts.
- * @mdev: pointer to mic_device instance
- */
-static void mic_x100_enable_interrupts(struct mic_device *mdev)
-{
- u32 reg;
- struct mic_mw *mw = &mdev->mmio;
- u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0;
- u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0;
-
- reg = mic_mmio_read(mw, sice0);
- reg |= MIC_X100_SBOX_DBR_BITS(0xf) | MIC_X100_SBOX_DMA_BITS(0xff);
- mic_mmio_write(mw, reg, sice0);
-
- /*
- * Enable auto-clear when enabling interrupts. Applicable only for
- * MSI-x. Legacy and MSI mode cannot have auto-clear enabled.
- */
- if (mdev->irq_info.num_vectors > 1) {
- reg = mic_mmio_read(mw, siac0);
- reg |= MIC_X100_SBOX_DBR_BITS(0xf) |
- MIC_X100_SBOX_DMA_BITS(0xff);
- mic_mmio_write(mw, reg, siac0);
- }
-}
-
-/**
- * mic_x100_disable_interrupts - Disable interrupts.
- * @mdev: pointer to mic_device instance
- */
-static void mic_x100_disable_interrupts(struct mic_device *mdev)
-{
- u32 reg;
- struct mic_mw *mw = &mdev->mmio;
- u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0;
- u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0;
- u32 sicc0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICC0;
-
- reg = mic_mmio_read(mw, sice0);
- mic_mmio_write(mw, reg, sicc0);
-
- if (mdev->irq_info.num_vectors > 1) {
- reg = mic_mmio_read(mw, siac0);
- reg &= ~(MIC_X100_SBOX_DBR_BITS(0xf) |
- MIC_X100_SBOX_DMA_BITS(0xff));
- mic_mmio_write(mw, reg, siac0);
- }
-}
-
-/**
- * mic_x100_send_sbox_intr - Send an MIC_X100_SBOX interrupt to MIC.
- * @mdev: pointer to mic_device instance
- * @doorbell: doorbell number
- */
-static void mic_x100_send_sbox_intr(struct mic_device *mdev,
- int doorbell)
-{
- struct mic_mw *mw = &mdev->mmio;
- u64 apic_icr_offset = MIC_X100_SBOX_APICICR0 + doorbell * 8;
- u32 apicicr_low = mic_mmio_read(mw, MIC_X100_SBOX_BASE_ADDRESS +
- apic_icr_offset);
-
- /* for MIC we need to make sure we "hit" the send_icr bit (13) */
- apicicr_low = (apicicr_low | (1 << 13));
-
- /* Ensure that the interrupt is ordered w.r.t. previous stores. */
- wmb();
- mic_mmio_write(mw, apicicr_low,
- MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset);
-}
-
-/**
- * mic_x100_send_rdmasr_intr - Send an RDMASR interrupt to MIC.
- * @mdev: pointer to mic_device instance
- * @doorbell: doorbell number
- */
-static void mic_x100_send_rdmasr_intr(struct mic_device *mdev,
- int doorbell)
-{
- int rdmasr_offset = MIC_X100_SBOX_RDMASR0 + (doorbell << 2);
- /* Ensure that the interrupt is ordered w.r.t. previous stores. */
- wmb();
- mic_mmio_write(&mdev->mmio, 0,
- MIC_X100_SBOX_BASE_ADDRESS + rdmasr_offset);
-}
-
-/**
- * __mic_x100_send_intr - Send interrupt to MIC.
- * @mdev: pointer to mic_device instance
- * @doorbell: doorbell number.
- */
-static void mic_x100_send_intr(struct mic_device *mdev, int doorbell)
-{
- int rdmasr_db;
- if (doorbell < MIC_X100_NUM_SBOX_IRQ) {
- mic_x100_send_sbox_intr(mdev, doorbell);
- } else {
- rdmasr_db = doorbell - MIC_X100_NUM_SBOX_IRQ;
- mic_x100_send_rdmasr_intr(mdev, rdmasr_db);
- }
-}
-
-/**
- * mic_x100_ack_interrupt - Read the interrupt sources register and
- * clear it. This function will be called in the MSI/INTx case.
- * @mdev: Pointer to mic_device instance.
- *
- * Returns: bitmask of interrupt sources triggered.
- */
-static u32 mic_x100_ack_interrupt(struct mic_device *mdev)
-{
- u32 sicr0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICR0;
- u32 reg = mic_mmio_read(&mdev->mmio, sicr0);
- mic_mmio_write(&mdev->mmio, reg, sicr0);
- return reg;
-}
-
-/**
- * mic_x100_intr_workarounds - These hardware specific workarounds are
- * to be invoked everytime an interrupt is handled.
- * @mdev: Pointer to mic_device instance.
- *
- * Returns: none
- */
-static void mic_x100_intr_workarounds(struct mic_device *mdev)
-{
- struct mic_mw *mw = &mdev->mmio;
-
- /* Clear pending bit array. */
- if (MIC_A0_STEP == mdev->stepping)
- mic_mmio_write(mw, 1, MIC_X100_SBOX_BASE_ADDRESS +
- MIC_X100_SBOX_MSIXPBACR);
-
- if (mdev->stepping >= MIC_B0_STEP)
- mdev->intr_ops->enable_interrupts(mdev);
-}
-
-/**
- * mic_x100_hw_intr_init - Initialize h/w specific interrupt
- * information.
- * @mdev: pointer to mic_device instance
- */
-static void mic_x100_hw_intr_init(struct mic_device *mdev)
-{
- mdev->intr_info = (struct mic_intr_info *)mic_x100_intr_init;
-}
-
-/**
- * mic_x100_read_msi_to_src_map - read from the MSI mapping registers
- * @mdev: pointer to mic_device instance
- * @idx: index to the mapping register, 0 based
- *
- * This function allows reading of the 32bit MSI mapping register.
- *
- * RETURNS: The value in the register.
- */
-static u32
-mic_x100_read_msi_to_src_map(struct mic_device *mdev, int idx)
-{
- return mic_mmio_read(&mdev->mmio,
- MIC_X100_SBOX_BASE_ADDRESS +
- MIC_X100_SBOX_MXAR0 + idx * 4);
-}
-
-/**
- * mic_x100_program_msi_to_src_map - program the MSI mapping registers
- * @mdev: pointer to mic_device instance
- * @idx: index to the mapping register, 0 based
- * @offset: The bit offset in the register that needs to be updated.
- * @set: boolean specifying if the bit in the specified offset needs
- * to be set or cleared.
- *
- * RETURNS: None.
- */
-static void
-mic_x100_program_msi_to_src_map(struct mic_device *mdev,
- int idx, int offset, bool set)
-{
- unsigned long reg;
- struct mic_mw *mw = &mdev->mmio;
- u32 mxar = MIC_X100_SBOX_BASE_ADDRESS +
- MIC_X100_SBOX_MXAR0 + idx * 4;
-
- reg = mic_mmio_read(mw, mxar);
- if (set)
- __set_bit(offset, &reg);
- else
- __clear_bit(offset, &reg);
- mic_mmio_write(mw, reg, mxar);
-}
-
-/*
- * mic_x100_reset_fw_ready - Reset Firmware ready status field.
- * @mdev: pointer to mic_device instance
- */
-static void mic_x100_reset_fw_ready(struct mic_device *mdev)
-{
- mdev->ops->write_spad(mdev, MIC_X100_DOWNLOAD_INFO, 0);
-}
-
-/*
- * mic_x100_is_fw_ready - Check if firmware is ready.
- * @mdev: pointer to mic_device instance
- */
-static bool mic_x100_is_fw_ready(struct mic_device *mdev)
-{
- u32 scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
- return MIC_X100_SPAD2_DOWNLOAD_STATUS(scratch2) ? true : false;
-}
-
-/**
- * mic_x100_get_apic_id - Get bootstrap APIC ID.
- * @mdev: pointer to mic_device instance
- */
-static u32 mic_x100_get_apic_id(struct mic_device *mdev)
-{
- u32 scratch2 = 0;
-
- scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
- return MIC_X100_SPAD2_APIC_ID(scratch2);
-}
-
-/**
- * mic_x100_send_firmware_intr - Send an interrupt to the firmware on MIC.
- * @mdev: pointer to mic_device instance
- */
-static void mic_x100_send_firmware_intr(struct mic_device *mdev)
-{
- u32 apicicr_low;
- u64 apic_icr_offset = MIC_X100_SBOX_APICICR7;
- int vector = MIC_X100_BSP_INTERRUPT_VECTOR;
- struct mic_mw *mw = &mdev->mmio;
-
- /*
- * For MIC we need to make sure we "hit"
- * the send_icr bit (13).
- */
- apicicr_low = (vector | (1 << 13));
-
- mic_mmio_write(mw, mic_x100_get_apic_id(mdev),
- MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset + 4);
-
- /* Ensure that the interrupt is ordered w.r.t. previous stores. */
- wmb();
- mic_mmio_write(mw, apicicr_low,
- MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset);
-}
-
-/**
- * mic_x100_hw_reset - Reset the MIC device.
- * @mdev: pointer to mic_device instance
- */
-static void mic_x100_hw_reset(struct mic_device *mdev)
-{
- u32 reset_reg;
- u32 rgcr = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_RGCR;
- struct mic_mw *mw = &mdev->mmio;
-
- /* Ensure that the reset is ordered w.r.t. previous loads and stores */
- mb();
- /* Trigger reset */
- reset_reg = mic_mmio_read(mw, rgcr);
- reset_reg |= 0x1;
- mic_mmio_write(mw, reset_reg, rgcr);
- /*
- * It seems we really want to delay at least 1 second
- * after touching reset to prevent a lot of problems.
- */
- msleep(1000);
-}
-
-/**
- * mic_x100_load_command_line - Load command line to MIC.
- * @mdev: pointer to mic_device instance
- * @fw: the firmware image
- *
- * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
- */
-static int
-mic_x100_load_command_line(struct mic_device *mdev, const struct firmware *fw)
-{
- u32 len = 0;
- u32 boot_mem;
- char *buf;
- void __iomem *cmd_line_va = mdev->aper.va + mdev->bootaddr + fw->size;
-#define CMDLINE_SIZE 2048
-
- boot_mem = mdev->aper.len >> 20;
- buf = kzalloc(CMDLINE_SIZE, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- len += scnprintf(buf, CMDLINE_SIZE - len,
- " mem=%dM", boot_mem);
- if (mdev->cosm_dev->cmdline)
- scnprintf(buf + len, CMDLINE_SIZE - len, " %s",
- mdev->cosm_dev->cmdline);
- memcpy_toio(cmd_line_va, buf, strlen(buf) + 1);
- kfree(buf);
- return 0;
-}
-
-/**
- * mic_x100_load_ramdisk - Load ramdisk to MIC.
- * @mdev: pointer to mic_device instance
- *
- * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
- */
-static int
-mic_x100_load_ramdisk(struct mic_device *mdev)
-{
- const struct firmware *fw;
- int rc;
- struct boot_params __iomem *bp = mdev->aper.va + mdev->bootaddr;
-
- rc = request_firmware(&fw, mdev->cosm_dev->ramdisk, &mdev->pdev->dev);
- if (rc < 0) {
- dev_err(&mdev->pdev->dev,
- "ramdisk request_firmware failed: %d %s\n",
- rc, mdev->cosm_dev->ramdisk);
- goto error;
- }
- /*
- * Typically the bootaddr for card OS is 64M
- * so copy over the ramdisk @ 128M.
- */
- memcpy_toio(mdev->aper.va + (mdev->bootaddr << 1), fw->data, fw->size);
- iowrite32(mdev->bootaddr << 1, &bp->hdr.ramdisk_image);
- iowrite32(fw->size, &bp->hdr.ramdisk_size);
- release_firmware(fw);
-error:
- return rc;
-}
-
-/**
- * mic_x100_get_boot_addr - Get MIC boot address.
- * @mdev: pointer to mic_device instance
- *
- * This function is called during firmware load to determine
- * the address at which the OS should be downloaded in card
- * memory i.e. GDDR.
- * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
- */
-static int
-mic_x100_get_boot_addr(struct mic_device *mdev)
-{
- u32 scratch2, boot_addr;
- int rc = 0;
-
- scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
- boot_addr = MIC_X100_SPAD2_DOWNLOAD_ADDR(scratch2);
- dev_dbg(&mdev->pdev->dev, "%s %d boot_addr 0x%x\n",
- __func__, __LINE__, boot_addr);
- if (boot_addr > (1 << 31)) {
- dev_err(&mdev->pdev->dev,
- "incorrect bootaddr 0x%x\n",
- boot_addr);
- rc = -EINVAL;
- goto error;
- }
- mdev->bootaddr = boot_addr;
-error:
- return rc;
-}
-
-/**
- * mic_x100_load_firmware - Load firmware to MIC.
- * @mdev: pointer to mic_device instance
- * @buf: buffer containing boot string including firmware/ramdisk path.
- *
- * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
- */
-static int
-mic_x100_load_firmware(struct mic_device *mdev, const char *buf)
-{
- int rc;
- const struct firmware *fw;
-
- rc = mic_x100_get_boot_addr(mdev);
- if (rc)
- return rc;
- /* load OS */
- rc = request_firmware(&fw, mdev->cosm_dev->firmware, &mdev->pdev->dev);
- if (rc < 0) {
- dev_err(&mdev->pdev->dev,
- "ramdisk request_firmware failed: %d %s\n",
- rc, mdev->cosm_dev->firmware);
- return rc;
- }
- if (mdev->bootaddr > mdev->aper.len - fw->size) {
- rc = -EINVAL;
- dev_err(&mdev->pdev->dev, "%s %d rc %d bootaddr 0x%x\n",
- __func__, __LINE__, rc, mdev->bootaddr);
- goto error;
- }
- memcpy_toio(mdev->aper.va + mdev->bootaddr, fw->data, fw->size);
- mdev->ops->write_spad(mdev, MIC_X100_FW_SIZE, fw->size);
- if (!strcmp(mdev->cosm_dev->bootmode, "flash")) {
- rc = -EINVAL;
- dev_err(&mdev->pdev->dev, "%s %d rc %d\n",
- __func__, __LINE__, rc);
- goto error;
- }
- /* load command line */
- rc = mic_x100_load_command_line(mdev, fw);
- if (rc) {
- dev_err(&mdev->pdev->dev, "%s %d rc %d\n",
- __func__, __LINE__, rc);
- goto error;
- }
- release_firmware(fw);
- /* load ramdisk */
- if (mdev->cosm_dev->ramdisk)
- rc = mic_x100_load_ramdisk(mdev);
-
- return rc;
-
-error:
- release_firmware(fw);
- return rc;
-}
-
-/**
- * mic_x100_get_postcode - Get postcode status from firmware.
- * @mdev: pointer to mic_device instance
- *
- * RETURNS: postcode.
- */
-static u32 mic_x100_get_postcode(struct mic_device *mdev)
-{
- return mic_mmio_read(&mdev->mmio, MIC_X100_POSTCODE);
-}
-
-/**
- * mic_x100_smpt_set - Update an SMPT entry with a DMA address.
- * @mdev: pointer to mic_device instance
- * @dma_addr: DMA address to use
- * @index: entry to write to
- *
- * RETURNS: none.
- */
-static void
-mic_x100_smpt_set(struct mic_device *mdev, dma_addr_t dma_addr, u8 index)
-{
-#define SNOOP_ON (0 << 0)
-#define SNOOP_OFF (1 << 0)
-/*
- * Sbox Smpt Reg Bits:
- * Bits 31:2 Host address
- * Bits 1 RSVD
- * Bits 0 No snoop
- */
-#define BUILD_SMPT(NO_SNOOP, HOST_ADDR) \
- (u32)(((HOST_ADDR) << 2) | ((NO_SNOOP) & 0x01))
-
- uint32_t smpt_reg_val = BUILD_SMPT(SNOOP_ON,
- dma_addr >> mdev->smpt->info.page_shift);
- mic_mmio_write(&mdev->mmio, smpt_reg_val,
- MIC_X100_SBOX_BASE_ADDRESS +
- MIC_X100_SBOX_SMPT00 + (4 * index));
-}
-
-/**
- * mic_x100_smpt_hw_init - Initialize SMPT X100 specific fields.
- * @mdev: pointer to mic_device instance
- *
- * RETURNS: none.
- */
-static void mic_x100_smpt_hw_init(struct mic_device *mdev)
-{
- struct mic_smpt_hw_info *info = &mdev->smpt->info;
-
- info->num_reg = 32;
- info->page_shift = 34;
- info->page_size = (1ULL << info->page_shift);
- info->base = 0x8000000000ULL;
-}
-
-struct mic_smpt_ops mic_x100_smpt_ops = {
- .init = mic_x100_smpt_hw_init,
- .set = mic_x100_smpt_set,
-};
-
-static bool mic_x100_dma_filter(struct dma_chan *chan, void *param)
-{
- if (chan->device->dev->parent == (struct device *)param)
- return true;
- return false;
-}
-
-struct mic_hw_ops mic_x100_ops = {
- .aper_bar = MIC_X100_APER_BAR,
- .mmio_bar = MIC_X100_MMIO_BAR,
- .read_spad = mic_x100_read_spad,
- .write_spad = mic_x100_write_spad,
- .send_intr = mic_x100_send_intr,
- .ack_interrupt = mic_x100_ack_interrupt,
- .intr_workarounds = mic_x100_intr_workarounds,
- .reset = mic_x100_hw_reset,
- .reset_fw_ready = mic_x100_reset_fw_ready,
- .is_fw_ready = mic_x100_is_fw_ready,
- .send_firmware_intr = mic_x100_send_firmware_intr,
- .load_mic_fw = mic_x100_load_firmware,
- .get_postcode = mic_x100_get_postcode,
- .dma_filter = mic_x100_dma_filter,
-};
-
-struct mic_hw_intr_ops mic_x100_intr_ops = {
- .intr_init = mic_x100_hw_intr_init,
- .enable_interrupts = mic_x100_enable_interrupts,
- .disable_interrupts = mic_x100_disable_interrupts,
- .program_msi_to_src_map = mic_x100_program_msi_to_src_map,
- .read_msi_to_src_map = mic_x100_read_msi_to_src_map,
-};