diff options
Diffstat (limited to 'drivers/misc/mic/scif/scif_main.h')
| -rw-r--r-- | drivers/misc/mic/scif/scif_main.h | 274 |
1 files changed, 0 insertions, 274 deletions
diff --git a/drivers/misc/mic/scif/scif_main.h b/drivers/misc/mic/scif/scif_main.h deleted file mode 100644 index bb3ab97d5b35..000000000000 --- a/drivers/misc/mic/scif/scif_main.h +++ /dev/null @@ -1,274 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2014 Intel Corporation. - * - * Intel SCIF driver. - */ -#ifndef SCIF_MAIN_H -#define SCIF_MAIN_H - -#include <linux/sched/signal.h> -#include <linux/pci.h> -#include <linux/miscdevice.h> -#include <linux/dmaengine.h> -#include <linux/iova.h> -#include <linux/anon_inodes.h> -#include <linux/file.h> -#include <linux/vmalloc.h> -#include <linux/scif.h> -#include "../common/mic_dev.h" - -#define SCIF_MGMT_NODE 0 -#define SCIF_DEFAULT_WATCHDOG_TO 30 -#define SCIF_NODE_ACCEPT_TIMEOUT (3 * HZ) -#define SCIF_NODE_ALIVE_TIMEOUT (SCIF_DEFAULT_WATCHDOG_TO * HZ) -#define SCIF_RMA_TEMP_CACHE_LIMIT 0x20000 - -/* - * Generic state used for certain node QP message exchanges - * like Unregister, Alloc etc. - */ -enum scif_msg_state { - OP_IDLE = 1, - OP_IN_PROGRESS, - OP_COMPLETED, - OP_FAILED -}; - -/* - * struct scif_info - Global SCIF information - * - * @nodeid: Node ID this node is to others - * @maxid: Max known node ID - * @total: Total number of SCIF nodes - * @nr_zombies: number of zombie endpoints - * @eplock: Lock to synchronize listening, zombie endpoint lists - * @connlock: Lock to synchronize connected and disconnected lists - * @nb_connect_lock: Synchronize non blocking connect operations - * @port_lock: Synchronize access to SCIF ports - * @uaccept: List of user acceptreq waiting for acceptreg - * @listen: List of listening end points - * @zombie: List of zombie end points with pending RMA's - * @connected: List of end points in connected state - * @disconnected: List of end points in disconnected state - * @nb_connect_list: List for non blocking connections - * @misc_work: miscellaneous SCIF tasks - * @conflock: Lock to synchronize SCIF node configuration changes - * @en_msg_log: Enable debug message logging - * @p2p_enable: Enable P2P SCIF network - * @mdev: The MISC device - * @conn_work: Work for workqueue handling all connections - * @exitwq: Wait queue for waiting for an EXIT node QP message response - * @loopb_dev: Dummy SCIF device used for loopback - * @loopb_wq: Workqueue used for handling loopback messages - * @loopb_wqname[16]: Name of loopback workqueue - * @loopb_work: Used for submitting work to loopb_wq - * @loopb_recv_q: List of messages received on the loopb_wq - * @card_initiated_exit: set when the card has initiated the exit - * @rmalock: Synchronize access to RMA operations - * @fencelock: Synchronize access to list of remote fences requested. - * @rma: List of temporary registered windows to be destroyed. - * @rma_tc: List of temporary registered & cached Windows to be destroyed - * @fence: List of remote fence requests - * @mmu_notif_work: Work for registration caching MMU notifier workqueue - * @mmu_notif_cleanup: List of temporary cached windows for reg cache - * @rma_tc_limit: RMA temporary cache limit - */ -struct scif_info { - u8 nodeid; - u8 maxid; - u8 total; - u32 nr_zombies; - struct mutex eplock; - struct mutex connlock; - spinlock_t nb_connect_lock; - spinlock_t port_lock; - struct list_head uaccept; - struct list_head listen; - struct list_head zombie; - struct list_head connected; - struct list_head disconnected; - struct list_head nb_connect_list; - struct work_struct misc_work; - struct mutex conflock; - u8 en_msg_log; - u8 p2p_enable; - struct miscdevice mdev; - struct work_struct conn_work; - wait_queue_head_t exitwq; - struct scif_dev *loopb_dev; - struct workqueue_struct *loopb_wq; - char loopb_wqname[16]; - struct work_struct loopb_work; - struct list_head loopb_recv_q; - bool card_initiated_exit; - spinlock_t rmalock; - struct mutex fencelock; - struct list_head rma; - struct list_head rma_tc; - struct list_head fence; - struct work_struct mmu_notif_work; - struct list_head mmu_notif_cleanup; - unsigned long rma_tc_limit; -}; - -/* - * struct scif_p2p_info - SCIF mapping information used for P2P - * - * @ppi_peer_id - SCIF peer node id - * @ppi_sg - Scatter list for bar information (One for mmio and one for aper) - * @sg_nentries - Number of entries in the scatterlist - * @ppi_da: DMA address for MMIO and APER bars - * @ppi_len: Length of MMIO and APER bars - * @ppi_list: Link in list of mapping information - */ -struct scif_p2p_info { - u8 ppi_peer_id; - struct scatterlist *ppi_sg[2]; - u64 sg_nentries[2]; - dma_addr_t ppi_da[2]; - u64 ppi_len[2]; -#define SCIF_PPI_MMIO 0 -#define SCIF_PPI_APER 1 - struct list_head ppi_list; -}; - -/* - * struct scif_dev - SCIF remote device specific fields - * - * @node: Node id - * @p2p: List of P2P mapping information - * @qpairs: The node queue pair for exchanging control messages - * @intr_wq: Workqueue for handling Node QP messages - * @intr_wqname: Name of node QP workqueue for handling interrupts - * @intr_bh: Used for submitting work to intr_wq - * @lock: Lock used for synchronizing access to the scif device - * @sdev: SCIF hardware device on the SCIF hardware bus - * @db: doorbell the peer will trigger to generate an interrupt on self - * @rdb: Doorbell to trigger on the peer to generate an interrupt on the peer - * @cookie: Cookie received while registering the interrupt handler - * @peer_add_work: Work for handling device_add for peer devices - * @p2p_dwork: Delayed work to enable polling for P2P state - * @qp_dwork: Delayed work for enabling polling for remote QP information - * @p2p_retry: Number of times to retry polling of P2P state - * @base_addr: P2P aperture bar base address - * @mic_mw mmio: The peer MMIO information used for P2P - * @spdev: SCIF peer device on the SCIF peer bus - * @node_remove_ack_pending: True if a node_remove_ack is pending - * @exit_ack_pending: true if an exit_ack is pending - * @disconn_wq: Used while waiting for a node remove response - * @disconn_rescnt: Keeps track of number of node remove requests sent - * @exit: Status of exit message - * @qp_dma_addr: Queue pair DMA address passed to the peer - * @dma_ch_idx: Round robin index for DMA channels - * @signal_pool: DMA pool used for scheduling scif_fence_signal DMA's -*/ -struct scif_dev { - u8 node; - struct list_head p2p; - struct scif_qp *qpairs; - struct workqueue_struct *intr_wq; - char intr_wqname[16]; - struct work_struct intr_bh; - struct mutex lock; - struct scif_hw_dev *sdev; - int db; - int rdb; - struct mic_irq *cookie; - struct work_struct peer_add_work; - struct delayed_work p2p_dwork; - struct delayed_work qp_dwork; - int p2p_retry; - dma_addr_t base_addr; - struct mic_mw mmio; - struct scif_peer_dev __rcu *spdev; - bool node_remove_ack_pending; - bool exit_ack_pending; - wait_queue_head_t disconn_wq; - atomic_t disconn_rescnt; - enum scif_msg_state exit; - dma_addr_t qp_dma_addr; - int dma_ch_idx; - struct dma_pool *signal_pool; -}; - -extern bool scif_reg_cache_enable; -extern bool scif_ulimit_check; -extern struct scif_info scif_info; -extern struct idr scif_ports; -extern struct bus_type scif_peer_bus; -extern struct scif_dev *scif_dev; -extern const struct file_operations scif_fops; -extern const struct file_operations scif_anon_fops; - -/* Size of the RB for the Node QP */ -#define SCIF_NODE_QP_SIZE 0x10000 - -#include "scif_nodeqp.h" -#include "scif_rma.h" -#include "scif_rma_list.h" - -/* - * scifdev_self: - * @dev: The remote SCIF Device - * - * Returns true if the SCIF Device passed is the self aka Loopback SCIF device. - */ -static inline int scifdev_self(struct scif_dev *dev) -{ - return dev->node == scif_info.nodeid; -} - -static inline bool scif_is_mgmt_node(void) -{ - return !scif_info.nodeid; -} - -/* - * scifdev_is_p2p: - * @dev: The remote SCIF Device - * - * Returns true if the SCIF Device is a MIC Peer to Peer SCIF device. - */ -static inline bool scifdev_is_p2p(struct scif_dev *dev) -{ - if (scif_is_mgmt_node()) - return false; - else - return dev != &scif_dev[SCIF_MGMT_NODE] && - !scifdev_self(dev); -} - -/* - * scifdev_alive: - * @scifdev: The remote SCIF Device - * - * Returns true if the remote SCIF Device is running or sleeping for - * this endpoint. - */ -static inline int _scifdev_alive(struct scif_dev *scifdev) -{ - struct scif_peer_dev *spdev; - - rcu_read_lock(); - spdev = rcu_dereference(scifdev->spdev); - rcu_read_unlock(); - return !!spdev; -} - -#include "scif_epd.h" - -void __init scif_init_debugfs(void); -void scif_exit_debugfs(void); -int scif_setup_intr_wq(struct scif_dev *scifdev); -void scif_destroy_intr_wq(struct scif_dev *scifdev); -void scif_cleanup_scifdev(struct scif_dev *dev); -void scif_handle_remove_node(int node); -void scif_disconnect_node(u32 node_id, bool mgmt_initiated); -void scif_free_qp(struct scif_dev *dev); -void scif_misc_handler(struct work_struct *work); -void scif_stop(struct scif_dev *scifdev); -irqreturn_t scif_intr_handler(int irq, void *data); -#endif /* SCIF_MAIN_H */ |