diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-of-esdhc.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-of-esdhc.c | 194 |
1 files changed, 187 insertions, 7 deletions
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index d3aa67142839..44b016baa585 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -16,9 +16,12 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/delay.h> #include <linux/module.h> #include <linux/sys_soc.h> +#include <linux/clk.h> +#include <linux/ktime.h> #include <linux/mmc/host.h> #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" @@ -30,6 +33,7 @@ struct sdhci_esdhc { u8 vendor_ver; u8 spec_ver; bool quirk_incorrect_hostver; + unsigned int peripheral_clock; }; /** @@ -414,15 +418,25 @@ static int esdhc_of_enable_dma(struct sdhci_host *host) static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); - return pltfm_host->clock; + if (esdhc->peripheral_clock) + return esdhc->peripheral_clock; + else + return pltfm_host->clock; } static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); + unsigned int clock; - return pltfm_host->clock / 256 / 16; + if (esdhc->peripheral_clock) + clock = esdhc->peripheral_clock; + else + clock = pltfm_host->clock; + return clock / 256 / 16; } static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) @@ -431,7 +445,7 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); int pre_div = 1; int div = 1; - u32 timeout; + ktime_t timeout; u32 temp; host->mmc->actual_clock = 0; @@ -443,6 +457,20 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) if (esdhc->vendor_ver < VENDOR_V_23) pre_div = 2; + /* + * Limit SD clock to 167MHz for ls1046a according to its datasheet + */ + if (clock > 167000000 && + of_find_compatible_node(NULL, NULL, "fsl,ls1046a-esdhc")) + clock = 167000000; + + /* + * Limit SD clock to 125MHz for ls1012a according to its datasheet + */ + if (clock > 125000000 && + of_find_compatible_node(NULL, NULL, "fsl,ls1012a-esdhc")) + clock = 125000000; + /* Workaround to reduce the clock frequency for p1010 esdhc */ if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) { if (clock > 20000000) @@ -475,15 +503,14 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); /* Wait max 20 ms */ - timeout = 20; + timeout = ktime_add_ms(ktime_get(), 20); while (!(sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE)) { - if (timeout == 0) { + if (ktime_after(ktime_get(), timeout)) { pr_err("%s: Internal clock never stabilised.\n", mmc_hostname(host->mmc)); return; } - timeout--; - mdelay(1); + udelay(10); } temp |= ESDHC_CLOCK_SDCLKEN; @@ -512,6 +539,33 @@ static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width) sdhci_writel(host, ctrl, ESDHC_PROCTL); } +static void esdhc_clock_enable(struct sdhci_host *host, bool enable) +{ + u32 val; + ktime_t timeout; + + val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); + + if (enable) + val |= ESDHC_CLOCK_SDCLKEN; + else + val &= ~ESDHC_CLOCK_SDCLKEN; + + sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL); + + /* Wait max 20 ms */ + timeout = ktime_add_ms(ktime_get(), 20); + val = ESDHC_CLOCK_STABLE; + while (!(sdhci_readl(host, ESDHC_PRSSTAT) & val)) { + if (ktime_after(ktime_get(), timeout)) { + pr_err("%s: Internal clock never stabilised.\n", + mmc_hostname(host->mmc)); + break; + } + udelay(10); + } +} + static void esdhc_reset(struct sdhci_host *host, u8 mask) { sdhci_reset(host, mask); @@ -520,6 +574,95 @@ static void esdhc_reset(struct sdhci_host *host, u8 mask) sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); } +/* The SCFG, Supplemental Configuration Unit, provides SoC specific + * configuration and status registers for the device. There is a + * SDHC IO VSEL control register on SCFG for some platforms. It's + * used to support SDHC IO voltage switching. + */ +static const struct of_device_id scfg_device_ids[] = { + { .compatible = "fsl,t1040-scfg", }, + { .compatible = "fsl,ls1012a-scfg", }, + { .compatible = "fsl,ls1046a-scfg", }, + {} +}; + +/* SDHC IO VSEL control register definition */ +#define SCFG_SDHCIOVSELCR 0x408 +#define SDHCIOVSELCR_TGLEN 0x80000000 +#define SDHCIOVSELCR_VSELVAL 0x60000000 +#define SDHCIOVSELCR_SDHC_VS 0x00000001 + +static int esdhc_signal_voltage_switch(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct device_node *scfg_node; + void __iomem *scfg_base = NULL; + u32 sdhciovselcr; + u32 val; + + /* + * Signal Voltage Switching is only applicable for Host Controllers + * v3.00 and above. + */ + if (host->version < SDHCI_SPEC_300) + return 0; + + val = sdhci_readl(host, ESDHC_PROCTL); + + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_330: + val &= ~ESDHC_VOLT_SEL; + sdhci_writel(host, val, ESDHC_PROCTL); + return 0; + case MMC_SIGNAL_VOLTAGE_180: + scfg_node = of_find_matching_node(NULL, scfg_device_ids); + if (scfg_node) + scfg_base = of_iomap(scfg_node, 0); + if (scfg_base) { + sdhciovselcr = SDHCIOVSELCR_TGLEN | + SDHCIOVSELCR_VSELVAL; + iowrite32be(sdhciovselcr, + scfg_base + SCFG_SDHCIOVSELCR); + + val |= ESDHC_VOLT_SEL; + sdhci_writel(host, val, ESDHC_PROCTL); + mdelay(5); + + sdhciovselcr = SDHCIOVSELCR_TGLEN | + SDHCIOVSELCR_SDHC_VS; + iowrite32be(sdhciovselcr, + scfg_base + SCFG_SDHCIOVSELCR); + iounmap(scfg_base); + } else { + val |= ESDHC_VOLT_SEL; + sdhci_writel(host, val, ESDHC_PROCTL); + } + return 0; + default: + return 0; + } +} + +static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct sdhci_host *host = mmc_priv(mmc); + u32 val; + + /* Use tuning block for tuning procedure */ + esdhc_clock_enable(host, false); + val = sdhci_readl(host, ESDHC_DMA_SYSCTL); + val |= ESDHC_FLUSH_ASYNC_FIFO; + sdhci_writel(host, val, ESDHC_DMA_SYSCTL); + + val = sdhci_readl(host, ESDHC_TBCTL); + val |= ESDHC_TB_EN; + sdhci_writel(host, val, ESDHC_TBCTL); + esdhc_clock_enable(host, true); + + return sdhci_execute_tuning(mmc, opcode); +} + #ifdef CONFIG_PM_SLEEP static u32 esdhc_proctl; static int esdhc_of_suspend(struct device *dev) @@ -528,6 +671,9 @@ static int esdhc_of_suspend(struct device *dev) esdhc_proctl = sdhci_readl(host, SDHCI_HOST_CONTROL); + if (host->tuning_mode != SDHCI_TUNING_MODE_3) + mmc_retune_needed(host->mmc); + return sdhci_suspend_host(host); } @@ -610,6 +756,9 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host; struct sdhci_esdhc *esdhc; + struct device_node *np; + struct clk *clk; + u32 val; u16 host_ver; pltfm_host = sdhci_priv(host); @@ -623,6 +772,32 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host) esdhc->quirk_incorrect_hostver = true; else esdhc->quirk_incorrect_hostver = false; + + np = pdev->dev.of_node; + clk = of_clk_get(np, 0); + if (!IS_ERR(clk)) { + /* + * esdhc->peripheral_clock would be assigned with a value + * which is eSDHC base clock when use periperal clock. + * For ls1046a, the clock value got by common clk API is + * peripheral clock while the eSDHC base clock is 1/2 + * peripheral clock. + */ + if (of_device_is_compatible(np, "fsl,ls1046a-esdhc")) + esdhc->peripheral_clock = clk_get_rate(clk) / 2; + else + esdhc->peripheral_clock = clk_get_rate(clk); + + clk_put(clk); + } + + if (esdhc->peripheral_clock) { + esdhc_clock_enable(host, false); + val = sdhci_readl(host, ESDHC_DMA_SYSCTL); + val |= ESDHC_PERIPHERAL_CLK_SEL; + sdhci_writel(host, val, ESDHC_DMA_SYSCTL); + esdhc_clock_enable(host, true); + } } static int sdhci_esdhc_probe(struct platform_device *pdev) @@ -645,6 +820,11 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) if (IS_ERR(host)) return PTR_ERR(host); + host->mmc_host_ops.start_signal_voltage_switch = + esdhc_signal_voltage_switch; + host->mmc_host_ops.execute_tuning = esdhc_execute_tuning; + host->tuning_delay = 1; + esdhc_init(pdev, host); sdhci_get_of_property(pdev); |