summaryrefslogtreecommitdiff
path: root/drivers/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/host/renesas_sdhi_core.c14
-rw-r--r--drivers/mmc/host/sdhci-esdhc.h2
-rw-r--r--drivers/mmc/host/sdhci-of-esdhc.c30
-rw-r--r--drivers/mmc/host/sdhci.c6
-rw-r--r--drivers/mmc/host/tmio_mmc_core.c7
5 files changed, 42 insertions, 17 deletions
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index 414314151d0a..acb9c81a4e45 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -572,17 +572,6 @@ static void renesas_sdhi_reset(struct tmio_mmc_host *host)
TMIO_MASK_INIT_RCAR2);
}
-/*
- * This is a temporary workaround! This driver used 'hw_reset' wrongly and the
- * fix for that showed a regression. So, we mimic the old behaviour until the
- * proper solution is found.
- */
-static void renesas_sdhi_hw_reset(struct mmc_host *mmc)
-{
- struct tmio_mmc_host *host = mmc_priv(mmc);
- renesas_sdhi_reset(host);
-}
-
#define SH_MOBILE_SDHI_MIN_TAP_ROW 3
static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host)
@@ -1020,8 +1009,6 @@ int renesas_sdhi_probe(struct platform_device *pdev,
if (of_data && of_data->scc_offset) {
priv->scc_ctl = host->ctl + of_data->scc_offset;
host->reset = renesas_sdhi_reset;
- host->ops.hw_reset = renesas_sdhi_hw_reset;
- host->mmc->caps |= MMC_CAP_HW_RESET;
}
}
@@ -1160,6 +1147,7 @@ int renesas_sdhi_remove(struct platform_device *pdev)
tmio_mmc_host_remove(host);
renesas_sdhi_clk_disable(host);
+ tmio_mmc_host_free(host);
return 0;
}
diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h
index a30796e79b1c..6de02f09c322 100644
--- a/drivers/mmc/host/sdhci-esdhc.h
+++ b/drivers/mmc/host/sdhci-esdhc.h
@@ -5,6 +5,7 @@
* Copyright (c) 2007 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
* Copyright (c) 2010 Pengutronix e.K.
+ * Copyright 2020 NXP
* Author: Wolfram Sang <kernel@pengutronix.de>
*/
@@ -88,6 +89,7 @@
/* DLL Config 0 Register */
#define ESDHC_DLLCFG0 0x160
#define ESDHC_DLL_ENABLE 0x80000000
+#define ESDHC_DLL_RESET 0x40000000
#define ESDHC_DLL_FREQ_SEL 0x08000000
/* DLL Config 1 Register */
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 0b45eff6fed4..ab5ab969f711 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -4,6 +4,7 @@
*
* Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
+ * Copyright 2020 NXP
*
* Authors: Xiaobo Xie <X.Xie@freescale.com>
* Anton Vorontsov <avorontsov@ru.mvista.com>
@@ -19,6 +20,7 @@
#include <linux/clk.h>
#include <linux/ktime.h>
#include <linux/dma-mapping.h>
+#include <linux/iopoll.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include "sdhci-pltfm.h"
@@ -743,6 +745,21 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
if (host->mmc->actual_clock == MMC_HS200_MAX_DTR)
temp |= ESDHC_DLL_FREQ_SEL;
sdhci_writel(host, temp, ESDHC_DLLCFG0);
+
+ temp |= ESDHC_DLL_RESET;
+ sdhci_writel(host, temp, ESDHC_DLLCFG0);
+ udelay(1);
+ temp &= ~ESDHC_DLL_RESET;
+ sdhci_writel(host, temp, ESDHC_DLLCFG0);
+
+ /* Wait max 20 ms */
+ if (read_poll_timeout(sdhci_readl, temp,
+ temp & ESDHC_DLL_STS_SLV_LOCK,
+ 10, 20000, false,
+ host, ESDHC_DLLSTAT0))
+ pr_err("%s: timeout for delay chain lock.\n",
+ mmc_hostname(host->mmc));
+
temp = sdhci_readl(host, ESDHC_TBCTL);
sdhci_writel(host, temp | ESDHC_HS400_WNDW_ADJUST, ESDHC_TBCTL);
@@ -1052,6 +1069,17 @@ static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
esdhc_tuning_block_enable(host, true);
+ /*
+ * The eSDHC controller takes the data timeout value into account
+ * during tuning. If the SD card is too slow sending the response, the
+ * timer will expire and a "Buffer Read Ready" interrupt without data
+ * is triggered. This leads to tuning errors.
+ *
+ * Just set the timeout to the maximum value because the core will
+ * already take care of it in sdhci_send_tuning().
+ */
+ sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
+
hs400_tuning = host->flags & SDHCI_HS400_TUNING;
do {
@@ -1296,6 +1324,8 @@ static struct soc_device_attribute soc_fixup_sdhc_clkdivs[] = {
static struct soc_device_attribute soc_unreliable_pulse_detection[] = {
{ .family = "QorIQ LX2160A", .revision = "1.0", },
+ { .family = "QorIQ LX2160A", .revision = "2.0", },
+ { .family = "QorIQ LS1028A", .revision = "1.0", },
{ },
};
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 592a55a34b58..3561ae8a481a 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1384,9 +1384,11 @@ static inline void sdhci_auto_cmd_select(struct sdhci_host *host,
/*
* In case of Version 4.10 or later, use of 'Auto CMD Auto
* Select' is recommended rather than use of 'Auto CMD12
- * Enable' or 'Auto CMD23 Enable'.
+ * Enable' or 'Auto CMD23 Enable'. We require Version 4 Mode
+ * here because some controllers (e.g sdhci-of-dwmshc) expect it.
*/
- if (host->version >= SDHCI_SPEC_410 && (use_cmd12 || use_cmd23)) {
+ if (host->version >= SDHCI_SPEC_410 && host->v4_mode &&
+ (use_cmd12 || use_cmd23)) {
*mode |= SDHCI_TRNS_AUTO_SEL;
ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 2fce0518632d..cb4149fd12e0 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -175,6 +175,8 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host)
if (host->reset)
host->reset(host);
+ tmio_mmc_abort_dma(host);
+
if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) {
sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
@@ -223,8 +225,6 @@ static void tmio_mmc_reset_work(struct work_struct *work)
/* Ready for new calls */
host->mrq = NULL;
-
- tmio_mmc_abort_dma(host);
mmc_request_done(host->mmc, mrq);
}
@@ -927,6 +927,9 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
switch (ios->power_mode) {
case MMC_POWER_OFF:
tmio_mmc_power_off(host);
+ /* Downgrade ensures a sane state for tuning HW (e.g. SCC) */
+ if (host->mmc->ops->hs400_downgrade)
+ host->mmc->ops->hs400_downgrade(host->mmc);
host->set_clock(host, 0);
break;
case MMC_POWER_UP:
generated by cgit (git 2.34.1) at 2024-06-07 06:37:42 +0000