summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/raw/mxc_nand.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/raw/mxc_nand.c')
-rw-r--r--drivers/mtd/nand/raw/mxc_nand.c162
1 files changed, 78 insertions, 84 deletions
diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c
index 45786e707b7b..4c9214dea424 100644
--- a/drivers/mtd/nand/raw/mxc_nand.c
+++ b/drivers/mtd/nand/raw/mxc_nand.c
@@ -1,20 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
*/
#include <linux/delay.h>
@@ -34,8 +21,6 @@
#include <linux/completion.h>
#include <linux/of.h>
#include <linux/of_device.h>
-
-#include <asm/mach/flash.h>
#include <linux/platform_data/mtd-mxc_nand.h>
#define DRIVER_NAME "mxc_nand"
@@ -48,7 +33,7 @@
#define NFC_V1_V2_CONFIG (host->regs + 0x0a)
#define NFC_V1_V2_ECC_STATUS_RESULT (host->regs + 0x0c)
#define NFC_V1_V2_RSLTMAIN_AREA (host->regs + 0x0e)
-#define NFC_V1_V2_RSLTSPARE_AREA (host->regs + 0x10)
+#define NFC_V21_RSLTSPARE_AREA (host->regs + 0x10)
#define NFC_V1_V2_WRPROT (host->regs + 0x12)
#define NFC_V1_UNLOCKSTART_BLKADDR (host->regs + 0x14)
#define NFC_V1_UNLOCKEND_BLKADDR (host->regs + 0x16)
@@ -1274,6 +1259,9 @@ static void preset_v2(struct mtd_info *mtd)
writew(config1, NFC_V1_V2_CONFIG1);
/* preset operation */
+ /* spare area size in 16-bit half-words */
+ writew(mtd->oobsize / 2, NFC_V21_RSLTSPARE_AREA);
+
/* Unlock the internal RAM Buffer */
writew(0x2, NFC_V1_V2_CONFIG);
@@ -1683,7 +1671,7 @@ static const struct of_device_id mxcnd_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, mxcnd_dt_ids);
-static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
+static int mxcnd_probe_dt(struct mxc_nand_host *host)
{
struct device_node *np = host->dev->of_node;
const struct of_device_id *of_id =
@@ -1697,12 +1685,80 @@ static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
return 0;
}
#else
-static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
+static int mxcnd_probe_dt(struct mxc_nand_host *host)
{
return 1;
}
#endif
+static int mxcnd_attach_chip(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct mxc_nand_host *host = nand_get_controller_data(chip);
+ struct device *dev = mtd->dev.parent;
+
+ switch (chip->ecc.mode) {
+ case NAND_ECC_HW:
+ chip->ecc.read_page = mxc_nand_read_page;
+ chip->ecc.read_page_raw = mxc_nand_read_page_raw;
+ chip->ecc.read_oob = mxc_nand_read_oob;
+ chip->ecc.write_page = mxc_nand_write_page_ecc;
+ chip->ecc.write_page_raw = mxc_nand_write_page_raw;
+ chip->ecc.write_oob = mxc_nand_write_oob;
+ break;
+
+ case NAND_ECC_SOFT:
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if (chip->bbt_options & NAND_BBT_USE_FLASH) {
+ chip->bbt_td = &bbt_main_descr;
+ chip->bbt_md = &bbt_mirror_descr;
+ }
+
+ /* Allocate the right size buffer now */
+ devm_kfree(dev, (void *)host->data_buf);
+ host->data_buf = devm_kzalloc(dev, mtd->writesize + mtd->oobsize,
+ GFP_KERNEL);
+ if (!host->data_buf)
+ return -ENOMEM;
+
+ /* Call preset again, with correct writesize chip time */
+ host->devtype_data->preset(mtd);
+
+ if (!chip->ecc.bytes) {
+ if (host->eccsize == 8)
+ chip->ecc.bytes = 18;
+ else if (host->eccsize == 4)
+ chip->ecc.bytes = 9;
+ }
+
+ /*
+ * Experimentation shows that i.MX NFC can only handle up to 218 oob
+ * bytes. Limit used_oobsize to 218 so as to not confuse copy_spare()
+ * into copying invalid data to/from the spare IO buffer, as this
+ * might cause ECC data corruption when doing sub-page write to a
+ * partially written page.
+ */
+ host->used_oobsize = min(mtd->oobsize, 218U);
+
+ if (chip->ecc.mode == NAND_ECC_HW) {
+ if (is_imx21_nfc(host) || is_imx27_nfc(host))
+ chip->ecc.strength = 1;
+ else
+ chip->ecc.strength = (host->eccsize == 4) ? 4 : 8;
+ }
+
+ return 0;
+}
+
+static const struct nand_controller_ops mxcnd_controller_ops = {
+ .attach_chip = mxcnd_attach_chip,
+};
+
static int mxcnd_probe(struct platform_device *pdev)
{
struct nand_chip *this;
@@ -1842,71 +1898,9 @@ static int mxcnd_probe(struct platform_device *pdev)
host->devtype_data->irq_control(host, 1);
}
- /* first scan to find the device and get the page size */
- err = nand_scan_ident(mtd, is_imx25_nfc(host) ? 4 : 1, NULL);
- if (err)
- goto escan;
-
- switch (this->ecc.mode) {
- case NAND_ECC_HW:
- this->ecc.read_page = mxc_nand_read_page;
- this->ecc.read_page_raw = mxc_nand_read_page_raw;
- this->ecc.read_oob = mxc_nand_read_oob;
- this->ecc.write_page = mxc_nand_write_page_ecc;
- this->ecc.write_page_raw = mxc_nand_write_page_raw;
- this->ecc.write_oob = mxc_nand_write_oob;
- break;
-
- case NAND_ECC_SOFT:
- break;
-
- default:
- err = -EINVAL;
- goto escan;
- }
-
- if (this->bbt_options & NAND_BBT_USE_FLASH) {
- this->bbt_td = &bbt_main_descr;
- this->bbt_md = &bbt_mirror_descr;
- }
-
- /* allocate the right size buffer now */
- devm_kfree(&pdev->dev, (void *)host->data_buf);
- host->data_buf = devm_kzalloc(&pdev->dev, mtd->writesize + mtd->oobsize,
- GFP_KERNEL);
- if (!host->data_buf) {
- err = -ENOMEM;
- goto escan;
- }
-
- /* Call preset again, with correct writesize this time */
- host->devtype_data->preset(mtd);
-
- if (!this->ecc.bytes) {
- if (host->eccsize == 8)
- this->ecc.bytes = 18;
- else if (host->eccsize == 4)
- this->ecc.bytes = 9;
- }
-
- /*
- * Experimentation shows that i.MX NFC can only handle up to 218 oob
- * bytes. Limit used_oobsize to 218 so as to not confuse copy_spare()
- * into copying invalid data to/from the spare IO buffer, as this
- * might cause ECC data corruption when doing sub-page write to a
- * partially written page.
- */
- host->used_oobsize = min(mtd->oobsize, 218U);
-
- if (this->ecc.mode == NAND_ECC_HW) {
- if (is_imx21_nfc(host) || is_imx27_nfc(host))
- this->ecc.strength = 1;
- else
- this->ecc.strength = (host->eccsize == 4) ? 4 : 8;
- }
-
- /* second phase scan */
- err = nand_scan_tail(mtd);
+ /* Scan the NAND device */
+ this->dummy_controller.ops = &mxcnd_controller_ops;
+ err = nand_scan(mtd, is_imx25_nfc(host) ? 4 : 1);
if (err)
goto escan;