summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/raw/omap2.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/raw/omap2.c')
-rw-r--r--drivers/mtd/nand/raw/omap2.c507
1 files changed, 221 insertions, 286 deletions
diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
index b26d4947af02..f0bbbe401e76 100644
--- a/drivers/mtd/nand/raw/omap2.c
+++ b/drivers/mtd/nand/raw/omap2.c
@@ -19,7 +19,7 @@
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/omap-dma.h>
-#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
@@ -148,7 +148,6 @@ struct omap_nand_info {
int gpmc_cs;
bool dev_ready;
enum nand_io xfer_type;
- int devsize;
enum omap_ecc ecc_opt;
struct device_node *elm_of_node;
@@ -164,6 +163,7 @@ struct omap_nand_info {
u_char *buf;
int buf_len;
/* Interface to GPMC */
+ void __iomem *fifo;
struct gpmc_nand_regs reg;
struct gpmc_nand_ops *ops;
bool flash_bbt;
@@ -175,6 +175,11 @@ struct omap_nand_info {
unsigned int nsteps_per_eccpg;
unsigned int eccpg_size;
unsigned int eccpg_bytes;
+ void (*data_in)(struct nand_chip *chip, void *buf,
+ unsigned int len, bool force_8bit);
+ void (*data_out)(struct nand_chip *chip,
+ const void *buf, unsigned int len,
+ bool force_8bit);
};
static inline struct omap_nand_info *mtd_to_omap(struct mtd_info *mtd)
@@ -182,6 +187,13 @@ static inline struct omap_nand_info *mtd_to_omap(struct mtd_info *mtd)
return container_of(mtd_to_nand(mtd), struct omap_nand_info, nand);
}
+static void omap_nand_data_in(struct nand_chip *chip, void *buf,
+ unsigned int len, bool force_8bit);
+
+static void omap_nand_data_out(struct nand_chip *chip,
+ const void *buf, unsigned int len,
+ bool force_8bit);
+
/**
* omap_prefetch_enable - configures and starts prefetch transfer
* @cs: cs (chip select) number
@@ -241,169 +253,70 @@ static int omap_prefetch_reset(int cs, struct omap_nand_info *info)
}
/**
- * omap_hwcontrol - hardware specific access to control-lines
- * @chip: NAND chip object
- * @cmd: command to device
- * @ctrl:
- * NAND_NCE: bit 0 -> don't care
- * NAND_CLE: bit 1 -> Command Latch
- * NAND_ALE: bit 2 -> Address Latch
- *
- * NOTE: boards may use different bits for these!!
+ * omap_nand_data_in_pref - NAND data in using prefetch engine
*/
-static void omap_hwcontrol(struct nand_chip *chip, int cmd, unsigned int ctrl)
+static void omap_nand_data_in_pref(struct nand_chip *chip, void *buf,
+ unsigned int len, bool force_8bit)
{
struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip));
-
- if (cmd != NAND_CMD_NONE) {
- if (ctrl & NAND_CLE)
- writeb(cmd, info->reg.gpmc_nand_command);
-
- else if (ctrl & NAND_ALE)
- writeb(cmd, info->reg.gpmc_nand_address);
-
- else /* NAND_NCE */
- writeb(cmd, info->reg.gpmc_nand_data);
- }
-}
-
-/**
- * omap_read_buf8 - read data from NAND controller into buffer
- * @mtd: MTD device structure
- * @buf: buffer to store date
- * @len: number of bytes to read
- */
-static void omap_read_buf8(struct mtd_info *mtd, u_char *buf, int len)
-{
- struct nand_chip *nand = mtd_to_nand(mtd);
-
- ioread8_rep(nand->legacy.IO_ADDR_R, buf, len);
-}
-
-/**
- * omap_write_buf8 - write buffer to NAND controller
- * @mtd: MTD device structure
- * @buf: data buffer
- * @len: number of bytes to write
- */
-static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
-{
- struct omap_nand_info *info = mtd_to_omap(mtd);
- u_char *p = (u_char *)buf;
- bool status;
-
- while (len--) {
- iowrite8(*p++, info->nand.legacy.IO_ADDR_W);
- /* wait until buffer is available for write */
- do {
- status = info->ops->nand_writebuffer_empty();
- } while (!status);
- }
-}
-
-/**
- * omap_read_buf16 - read data from NAND controller into buffer
- * @mtd: MTD device structure
- * @buf: buffer to store date
- * @len: number of bytes to read
- */
-static void omap_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
-{
- struct nand_chip *nand = mtd_to_nand(mtd);
-
- ioread16_rep(nand->legacy.IO_ADDR_R, buf, len / 2);
-}
-
-/**
- * omap_write_buf16 - write buffer to NAND controller
- * @mtd: MTD device structure
- * @buf: data buffer
- * @len: number of bytes to write
- */
-static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
-{
- struct omap_nand_info *info = mtd_to_omap(mtd);
- u16 *p = (u16 *) buf;
- bool status;
- /* FIXME try bursts of writesw() or DMA ... */
- len >>= 1;
-
- while (len--) {
- iowrite16(*p++, info->nand.legacy.IO_ADDR_W);
- /* wait until buffer is available for write */
- do {
- status = info->ops->nand_writebuffer_empty();
- } while (!status);
- }
-}
-
-/**
- * omap_read_buf_pref - read data from NAND controller into buffer
- * @chip: NAND chip object
- * @buf: buffer to store date
- * @len: number of bytes to read
- */
-static void omap_read_buf_pref(struct nand_chip *chip, u_char *buf, int len)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct omap_nand_info *info = mtd_to_omap(mtd);
uint32_t r_count = 0;
int ret = 0;
u32 *p = (u32 *)buf;
+ unsigned int pref_len;
- /* take care of subpage reads */
- if (len % 4) {
- if (info->nand.options & NAND_BUSWIDTH_16)
- omap_read_buf16(mtd, buf, len % 4);
- else
- omap_read_buf8(mtd, buf, len % 4);
- p = (u32 *) (buf + len % 4);
- len -= len % 4;
+ if (force_8bit) {
+ omap_nand_data_in(chip, buf, len, force_8bit);
+ return;
}
+ /* read 32-bit words using prefetch and remaining bytes normally */
+
/* configure and start prefetch transfer */
+ pref_len = len - (len & 3);
ret = omap_prefetch_enable(info->gpmc_cs,
- PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0, info);
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x0, pref_len, 0x0, info);
if (ret) {
- /* PFPW engine is busy, use cpu copy method */
- if (info->nand.options & NAND_BUSWIDTH_16)
- omap_read_buf16(mtd, (u_char *)p, len);
- else
- omap_read_buf8(mtd, (u_char *)p, len);
+ /* prefetch engine is busy, use CPU copy method */
+ omap_nand_data_in(chip, buf, len, false);
} else {
do {
r_count = readl(info->reg.gpmc_prefetch_status);
r_count = PREFETCH_STATUS_FIFO_CNT(r_count);
r_count = r_count >> 2;
- ioread32_rep(info->nand.legacy.IO_ADDR_R, p, r_count);
+ ioread32_rep(info->fifo, p, r_count);
p += r_count;
- len -= r_count << 2;
- } while (len);
- /* disable and stop the PFPW engine */
+ pref_len -= r_count << 2;
+ } while (pref_len);
+ /* disable and stop the Prefetch engine */
omap_prefetch_reset(info->gpmc_cs, info);
+ /* fetch any remaining bytes */
+ if (len & 3)
+ omap_nand_data_in(chip, p, len & 3, false);
}
}
/**
- * omap_write_buf_pref - write buffer to NAND controller
- * @chip: NAND chip object
- * @buf: data buffer
- * @len: number of bytes to write
+ * omap_nand_data_out_pref - NAND data out using Write Posting engine
*/
-static void omap_write_buf_pref(struct nand_chip *chip, const u_char *buf,
- int len)
+static void omap_nand_data_out_pref(struct nand_chip *chip,
+ const void *buf, unsigned int len,
+ bool force_8bit)
{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct omap_nand_info *info = mtd_to_omap(mtd);
+ struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip));
uint32_t w_count = 0;
int i = 0, ret = 0;
u16 *p = (u16 *)buf;
unsigned long tim, limit;
u32 val;
+ if (force_8bit) {
+ omap_nand_data_out(chip, buf, len, force_8bit);
+ return;
+ }
+
/* take care of subpage writes */
if (len % 2 != 0) {
- writeb(*buf, info->nand.legacy.IO_ADDR_W);
+ writeb(*(u8 *)buf, info->fifo);
p = (u16 *)(buf + 1);
len--;
}
@@ -412,18 +325,15 @@ static void omap_write_buf_pref(struct nand_chip *chip, const u_char *buf,
ret = omap_prefetch_enable(info->gpmc_cs,
PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1, info);
if (ret) {
- /* PFPW engine is busy, use cpu copy method */
- if (info->nand.options & NAND_BUSWIDTH_16)
- omap_write_buf16(mtd, (u_char *)p, len);
- else
- omap_write_buf8(mtd, (u_char *)p, len);
+ /* write posting engine is busy, use CPU copy method */
+ omap_nand_data_out(chip, buf, len, false);
} else {
while (len) {
w_count = readl(info->reg.gpmc_prefetch_status);
w_count = PREFETCH_STATUS_FIFO_CNT(w_count);
w_count = w_count >> 1;
for (i = 0; (i < w_count) && len; i++, len -= 2)
- iowrite16(*p++, info->nand.legacy.IO_ADDR_W);
+ iowrite16(*p++, info->fifo);
}
/* wait for data to flushed-out before reset the prefetch */
tim = 0;
@@ -451,15 +361,16 @@ static void omap_nand_dma_callback(void *data)
/*
* omap_nand_dma_transfer: configure and start dma transfer
- * @mtd: MTD device structure
+ * @chip: nand chip structure
* @addr: virtual address in RAM of source/destination
* @len: number of data bytes to be transferred
* @is_write: flag for read/write operation
*/
-static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
- unsigned int len, int is_write)
+static inline int omap_nand_dma_transfer(struct nand_chip *chip,
+ const void *addr, unsigned int len,
+ int is_write)
{
- struct omap_nand_info *info = mtd_to_omap(mtd);
+ struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip));
struct dma_async_tx_descriptor *tx;
enum dma_data_direction dir = is_write ? DMA_TO_DEVICE :
DMA_FROM_DEVICE;
@@ -521,49 +432,51 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
out_copy_unmap:
dma_unmap_sg(info->dma->device->dev, &sg, 1, dir);
out_copy:
- if (info->nand.options & NAND_BUSWIDTH_16)
- is_write == 0 ? omap_read_buf16(mtd, (u_char *) addr, len)
- : omap_write_buf16(mtd, (u_char *) addr, len);
- else
- is_write == 0 ? omap_read_buf8(mtd, (u_char *) addr, len)
- : omap_write_buf8(mtd, (u_char *) addr, len);
+ is_write == 0 ? omap_nand_data_in(chip, (void *)addr, len, false)
+ : omap_nand_data_out(chip, addr, len, false);
+
return 0;
}
/**
- * omap_read_buf_dma_pref - read data from NAND controller into buffer
- * @chip: NAND chip object
- * @buf: buffer to store date
- * @len: number of bytes to read
+ * omap_nand_data_in_dma_pref - NAND data in using DMA and Prefetch
*/
-static void omap_read_buf_dma_pref(struct nand_chip *chip, u_char *buf,
- int len)
+static void omap_nand_data_in_dma_pref(struct nand_chip *chip, void *buf,
+ unsigned int len, bool force_8bit)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ if (force_8bit) {
+ omap_nand_data_in(chip, buf, len, force_8bit);
+ return;
+ }
+
if (len <= mtd->oobsize)
- omap_read_buf_pref(chip, buf, len);
+ omap_nand_data_in_pref(chip, buf, len, false);
else
/* start transfer in DMA mode */
- omap_nand_dma_transfer(mtd, buf, len, 0x0);
+ omap_nand_dma_transfer(chip, buf, len, 0x0);
}
/**
- * omap_write_buf_dma_pref - write buffer to NAND controller
- * @chip: NAND chip object
- * @buf: data buffer
- * @len: number of bytes to write
+ * omap_nand_data_out_dma_pref - NAND data out using DMA and write posting
*/
-static void omap_write_buf_dma_pref(struct nand_chip *chip, const u_char *buf,
- int len)
+static void omap_nand_data_out_dma_pref(struct nand_chip *chip,
+ const void *buf, unsigned int len,
+ bool force_8bit)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ if (force_8bit) {
+ omap_nand_data_out(chip, buf, len, force_8bit);
+ return;
+ }
+
if (len <= mtd->oobsize)
- omap_write_buf_pref(chip, buf, len);
+ omap_nand_data_out_pref(chip, buf, len, false);
else
/* start transfer in DMA mode */
- omap_nand_dma_transfer(mtd, (u_char *)buf, len, 0x1);
+ omap_nand_dma_transfer(chip, buf, len, 0x1);
}
/*
@@ -587,13 +500,13 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev)
bytes = info->buf_len;
else if (!info->buf_len)
bytes = 0;
- iowrite32_rep(info->nand.legacy.IO_ADDR_W, (u32 *)info->buf,
+ iowrite32_rep(info->fifo, (u32 *)info->buf,
bytes >> 2);
info->buf = info->buf + bytes;
info->buf_len -= bytes;
} else {
- ioread32_rep(info->nand.legacy.IO_ADDR_R, (u32 *)info->buf,
+ ioread32_rep(info->fifo, (u32 *)info->buf,
bytes >> 2);
info->buf = info->buf + bytes;
@@ -613,20 +526,17 @@ done:
}
/*
- * omap_read_buf_irq_pref - read data from NAND controller into buffer
- * @chip: NAND chip object
- * @buf: buffer to store date
- * @len: number of bytes to read
+ * omap_nand_data_in_irq_pref - NAND data in using Prefetch and IRQ
*/
-static void omap_read_buf_irq_pref(struct nand_chip *chip, u_char *buf,
- int len)
+static void omap_nand_data_in_irq_pref(struct nand_chip *chip, void *buf,
+ unsigned int len, bool force_8bit)
{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct omap_nand_info *info = mtd_to_omap(mtd);
+ struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip));
+ struct mtd_info *mtd = nand_to_mtd(&info->nand);
int ret = 0;
- if (len <= mtd->oobsize) {
- omap_read_buf_pref(chip, buf, len);
+ if (len <= mtd->oobsize || force_8bit) {
+ omap_nand_data_in(chip, buf, len, force_8bit);
return;
}
@@ -637,9 +547,11 @@ static void omap_read_buf_irq_pref(struct nand_chip *chip, u_char *buf,
/* configure and start prefetch transfer */
ret = omap_prefetch_enable(info->gpmc_cs,
PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0, info);
- if (ret)
+ if (ret) {
/* PFPW engine is busy, use cpu copy method */
- goto out_copy;
+ omap_nand_data_in(chip, buf, len, false);
+ return;
+ }
info->buf_len = len;
@@ -652,31 +564,23 @@ static void omap_read_buf_irq_pref(struct nand_chip *chip, u_char *buf,
/* disable and stop the PFPW engine */
omap_prefetch_reset(info->gpmc_cs, info);
return;
-
-out_copy:
- if (info->nand.options & NAND_BUSWIDTH_16)
- omap_read_buf16(mtd, buf, len);
- else
- omap_read_buf8(mtd, buf, len);
}
/*
- * omap_write_buf_irq_pref - write buffer to NAND controller
- * @chip: NAND chip object
- * @buf: data buffer
- * @len: number of bytes to write
+ * omap_nand_data_out_irq_pref - NAND out using write posting and IRQ
*/
-static void omap_write_buf_irq_pref(struct nand_chip *chip, const u_char *buf,
- int len)
+static void omap_nand_data_out_irq_pref(struct nand_chip *chip,
+ const void *buf, unsigned int len,
+ bool force_8bit)
{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct omap_nand_info *info = mtd_to_omap(mtd);
+ struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip));
+ struct mtd_info *mtd = nand_to_mtd(&info->nand);
int ret = 0;
unsigned long tim, limit;
u32 val;
- if (len <= mtd->oobsize) {
- omap_write_buf_pref(chip, buf, len);
+ if (len <= mtd->oobsize || force_8bit) {
+ omap_nand_data_out(chip, buf, len, force_8bit);
return;
}
@@ -687,9 +591,11 @@ static void omap_write_buf_irq_pref(struct nand_chip *chip, const u_char *buf,
/* configure and start prefetch transfer : size=24 */
ret = omap_prefetch_enable(info->gpmc_cs,
(PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1, info);
- if (ret)
+ if (ret) {
/* PFPW engine is busy, use cpu copy method */
- goto out_copy;
+ omap_nand_data_out(chip, buf, len, false);
+ return;
+ }
info->buf_len = len;
@@ -711,12 +617,6 @@ static void omap_write_buf_irq_pref(struct nand_chip *chip, const u_char *buf,
/* disable and stop the PFPW engine */
omap_prefetch_reset(info->gpmc_cs, info);
return;
-
-out_copy:
- if (info->nand.options & NAND_BUSWIDTH_16)
- omap_write_buf16(mtd, buf, len);
- else
- omap_write_buf8(mtd, buf, len);
}
/**
@@ -982,50 +882,6 @@ static void omap_enable_hwecc(struct nand_chip *chip, int mode)
}
/**
- * omap_wait - wait until the command is done
- * @this: NAND Chip structure
- *
- * Wait function is called during Program and erase operations and
- * the way it is called from MTD layer, we should wait till the NAND
- * chip is ready after the programming/erase operation has completed.
- *
- * Erase can take up to 400ms and program up to 20ms according to
- * general NAND and SmartMedia specs
- */
-static int omap_wait(struct nand_chip *this)
-{
- struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(this));
- unsigned long timeo = jiffies;
- int status;
-
- timeo += msecs_to_jiffies(400);
-
- writeb(NAND_CMD_STATUS & 0xFF, info->reg.gpmc_nand_command);
- while (time_before(jiffies, timeo)) {
- status = readb(info->reg.gpmc_nand_data);
- if (status & NAND_STATUS_READY)
- break;
- cond_resched();
- }
-
- status = readb(info->reg.gpmc_nand_data);
- return status;
-}
-
-/**
- * omap_dev_ready - checks the NAND Ready GPIO line
- * @chip: NAND chip object
- *
- * Returns true if ready and false if busy.
- */
-static int omap_dev_ready(struct nand_chip *chip)
-{
- struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip));
-
- return gpiod_get_value(info->ready_gpiod);
-}
-
-/**
* omap_enable_hwecc_bch - Program GPMC to perform BCH ECC calculation
* @chip: NAND chip object
* @mode: Read/Write mode
@@ -1543,8 +1399,8 @@ static int omap_write_page_bch(struct nand_chip *chip, const uint8_t *buf,
chip->ecc.hwctl(chip, NAND_ECC_WRITE);
/* Write data */
- chip->legacy.write_buf(chip, buf + (eccpg * info->eccpg_size),
- info->eccpg_size);
+ info->data_out(chip, buf + (eccpg * info->eccpg_size),
+ info->eccpg_size, false);
/* Update ecc vector from GPMC result registers */
ret = omap_calculate_ecc_bch_multi(mtd,
@@ -1562,7 +1418,7 @@ static int omap_write_page_bch(struct nand_chip *chip, const uint8_t *buf,
}
/* Write ecc vector to OOB area */
- chip->legacy.write_buf(chip, chip->oob_poi, mtd->oobsize);
+ info->data_out(chip, chip->oob_poi, mtd->oobsize, false);
return nand_prog_page_end_op(chip);
}
@@ -1607,8 +1463,8 @@ static int omap_write_subpage_bch(struct nand_chip *chip, u32 offset,
chip->ecc.hwctl(chip, NAND_ECC_WRITE);
/* Write data */
- chip->legacy.write_buf(chip, buf + (eccpg * info->eccpg_size),
- info->eccpg_size);
+ info->data_out(chip, buf + (eccpg * info->eccpg_size),
+ info->eccpg_size, false);
for (step = 0; step < info->nsteps_per_eccpg; step++) {
unsigned int base_step = eccpg * info->nsteps_per_eccpg;
@@ -1641,7 +1497,7 @@ static int omap_write_subpage_bch(struct nand_chip *chip, u32 offset,
}
/* write OOB buffer to NAND device */
- chip->legacy.write_buf(chip, chip->oob_poi, mtd->oobsize);
+ info->data_out(chip, chip->oob_poi, mtd->oobsize, false);
return nand_prog_page_end_op(chip);
}
@@ -1984,8 +1840,8 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
/* Re-populate low-level callbacks based on xfer modes */
switch (info->xfer_type) {
case NAND_OMAP_PREFETCH_POLLED:
- chip->legacy.read_buf = omap_read_buf_pref;
- chip->legacy.write_buf = omap_write_buf_pref;
+ info->data_in = omap_nand_data_in_pref;
+ info->data_out = omap_nand_data_out_pref;
break;
case NAND_OMAP_POLLED:
@@ -2017,8 +1873,9 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
err);
return err;
}
- chip->legacy.read_buf = omap_read_buf_dma_pref;
- chip->legacy.write_buf = omap_write_buf_dma_pref;
+
+ info->data_in = omap_nand_data_in_dma_pref;
+ info->data_out = omap_nand_data_out_dma_pref;
}
break;
@@ -2049,9 +1906,8 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
return err;
}
- chip->legacy.read_buf = omap_read_buf_irq_pref;
- chip->legacy.write_buf = omap_write_buf_irq_pref;
-
+ info->data_in = omap_nand_data_in_irq_pref;
+ info->data_out = omap_nand_data_out_irq_pref;
break;
default:
@@ -2217,8 +2073,105 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
return 0;
}
+static void omap_nand_data_in(struct nand_chip *chip, void *buf,
+ unsigned int len, bool force_8bit)
+{
+ struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip));
+ u32 alignment = ((uintptr_t)buf | len) & 3;
+
+ if (force_8bit || (alignment & 1))
+ ioread8_rep(info->fifo, buf, len);
+ else if (alignment & 3)
+ ioread16_rep(info->fifo, buf, len >> 1);
+ else
+ ioread32_rep(info->fifo, buf, len >> 2);
+}
+
+static void omap_nand_data_out(struct nand_chip *chip,
+ const void *buf, unsigned int len,
+ bool force_8bit)
+{
+ struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip));
+ u32 alignment = ((uintptr_t)buf | len) & 3;
+
+ if (force_8bit || (alignment & 1))
+ iowrite8_rep(info->fifo, buf, len);
+ else if (alignment & 3)
+ iowrite16_rep(info->fifo, buf, len >> 1);
+ else
+ iowrite32_rep(info->fifo, buf, len >> 2);
+}
+
+static int omap_nand_exec_instr(struct nand_chip *chip,
+ const struct nand_op_instr *instr)
+{
+ struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(chip));
+ unsigned int i;
+ int ret;
+
+ switch (instr->type) {
+ case NAND_OP_CMD_INSTR:
+ iowrite8(instr->ctx.cmd.opcode,
+ info->reg.gpmc_nand_command);
+ break;
+
+ case NAND_OP_ADDR_INSTR:
+ for (i = 0; i < instr->ctx.addr.naddrs; i++) {
+ iowrite8(instr->ctx.addr.addrs[i],
+ info->reg.gpmc_nand_address);
+ }
+ break;
+
+ case NAND_OP_DATA_IN_INSTR:
+ info->data_in(chip, instr->ctx.data.buf.in,
+ instr->ctx.data.len,
+ instr->ctx.data.force_8bit);
+ break;
+
+ case NAND_OP_DATA_OUT_INSTR:
+ info->data_out(chip, instr->ctx.data.buf.out,
+ instr->ctx.data.len,
+ instr->ctx.data.force_8bit);
+ break;
+
+ case NAND_OP_WAITRDY_INSTR:
+ ret = info->ready_gpiod ?
+ nand_gpio_waitrdy(chip, info->ready_gpiod, instr->ctx.waitrdy.timeout_ms) :
+ nand_soft_waitrdy(chip, instr->ctx.waitrdy.timeout_ms);
+ if (ret)
+ return ret;
+ break;
+ }
+
+ if (instr->delay_ns)
+ ndelay(instr->delay_ns);
+
+ return 0;
+}
+
+static int omap_nand_exec_op(struct nand_chip *chip,
+ const struct nand_operation *op,
+ bool check_only)
+{
+ unsigned int i;
+
+ if (check_only)
+ return 0;
+
+ for (i = 0; i < op->ninstrs; i++) {
+ int ret;
+
+ ret = omap_nand_exec_instr(chip, &op->instrs[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
static const struct nand_controller_ops omap_nand_controller_ops = {
.attach_chip = omap_nand_attach_chip,
+ .exec_op = omap_nand_exec_op,
};
/* Shared among all NAND instances to synchronize access to the ECC Engine */
@@ -2233,6 +2186,7 @@ static int omap_nand_probe(struct platform_device *pdev)
int err;
struct resource *res;
struct device *dev = &pdev->dev;
+ void __iomem *vaddr;
info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info),
GFP_KERNEL);
@@ -2266,10 +2220,11 @@ static int omap_nand_probe(struct platform_device *pdev)
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- nand_chip->legacy.IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(nand_chip->legacy.IO_ADDR_R))
- return PTR_ERR(nand_chip->legacy.IO_ADDR_R);
+ vaddr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(vaddr))
+ return PTR_ERR(vaddr);
+ info->fifo = vaddr;
info->phys_base = res->start;
if (!omap_gpmc_controller_initialized) {
@@ -2280,9 +2235,6 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->controller = &omap_gpmc_controller;
- nand_chip->legacy.IO_ADDR_W = nand_chip->legacy.IO_ADDR_R;
- nand_chip->legacy.cmd_ctrl = omap_hwcontrol;
-
info->ready_gpiod = devm_gpiod_get_optional(&pdev->dev, "rb",
GPIOD_IN);
if (IS_ERR(info->ready_gpiod)) {
@@ -2290,26 +2242,12 @@ static int omap_nand_probe(struct platform_device *pdev)
return PTR_ERR(info->ready_gpiod);
}
- /*
- * If RDY/BSY line is connected to OMAP then use the omap ready
- * function and the generic nand_wait function which reads the status
- * register after monitoring the RDY/BSY line. Otherwise use a standard
- * chip delay which is slightly more than tR (AC Timing) of the NAND
- * device and read status register until you get a failure or success
- */
- if (info->ready_gpiod) {
- nand_chip->legacy.dev_ready = omap_dev_ready;
- nand_chip->legacy.chip_delay = 0;
- } else {
- nand_chip->legacy.waitfunc = omap_wait;
- nand_chip->legacy.chip_delay = 50;
- }
-
if (info->flash_bbt)
nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
- /* scan NAND device connected to chip controller */
- nand_chip->options |= info->devsize & NAND_BUSWIDTH_16;
+ /* default operations */
+ info->data_in = omap_nand_data_in;
+ info->data_out = omap_nand_data_out;
err = nand_scan(nand_chip, 1);
if (err)
@@ -2352,10 +2290,7 @@ static int omap_nand_remove(struct platform_device *pdev)
return ret;
}
-static const struct of_device_id omap_nand_ids[] = {
- { .compatible = "ti,omap2-nand", },
- {},
-};
+/* omap_nand_ids defined in linux/platform_data/mtd-nand-omap2.h */
MODULE_DEVICE_TABLE(of, omap_nand_ids);
static struct platform_driver omap_nand_driver = {