summaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/mtdpart.c5
-rw-r--r--drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c13
-rw-r--r--drivers/mtd/nand/raw/nand_base.c1
-rw-r--r--drivers/mtd/nand/raw/nand_bbt.c2
-rw-r--r--drivers/mtd/nand/spi/core.c46
5 files changed, 34 insertions, 33 deletions
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 60104e1079c5..37f174ccbcec 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -480,6 +480,10 @@ static struct mtd_part *allocate_partition(struct mtd_info *parent,
/* let's register it anyway to preserve ordering */
slave->offset = 0;
slave->mtd.size = 0;
+
+ /* Initialize ->erasesize to make add_mtd_device() happy. */
+ slave->mtd.erasesize = parent->erasesize;
+
printk(KERN_ERR"mtd: partition \"%s\" is out of reach -- disabled\n",
part->name);
goto out_register;
@@ -632,7 +636,6 @@ err_remove_part:
mutex_unlock(&mtd_partitions_mutex);
free_partition(new);
- pr_info("%s:%i\n", __func__, __LINE__);
return ret;
}
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
index bd4cfac6b5aa..a4768df5083f 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
@@ -155,9 +155,10 @@ int gpmi_init(struct gpmi_nand_data *this)
/*
* Reset BCH here, too. We got failures otherwise :(
- * See later BCH reset for explanation of MX23 handling
+ * See later BCH reset for explanation of MX23 and MX28 handling
*/
- ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
+ ret = gpmi_reset_block(r->bch_regs,
+ GPMI_IS_MX23(this) || GPMI_IS_MX28(this));
if (ret)
goto err_out;
@@ -263,12 +264,10 @@ int bch_set_geometry(struct gpmi_nand_data *this)
/*
* Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this
* chip, otherwise it will lock up. So we skip resetting BCH on the MX23.
- * On the other hand, the MX28 needs the reset, because one case has been
- * seen where the BCH produced ECC errors constantly after 10000
- * consecutive reboots. The latter case has not been seen on the MX23
- * yet, still we don't know if it could happen there as well.
+ * and MX28.
*/
- ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
+ ret = gpmi_reset_block(r->bch_regs,
+ GPMI_IS_MX23(this) || GPMI_IS_MX28(this));
if (ret)
goto err_out;
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index cca4b24d2ffa..839494ac457c 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -410,6 +410,7 @@ static int nand_check_wp(struct nand_chip *chip)
/**
* nand_fill_oob - [INTERN] Transfer client buffer to oob
+ * @chip: NAND chip object
* @oob: oob data buffer
* @len: oob data write length
* @ops: oob ops structure
diff --git a/drivers/mtd/nand/raw/nand_bbt.c b/drivers/mtd/nand/raw/nand_bbt.c
index 1b722fe9213c..19a2b563acdf 100644
--- a/drivers/mtd/nand/raw/nand_bbt.c
+++ b/drivers/mtd/nand/raw/nand_bbt.c
@@ -158,7 +158,7 @@ static u32 add_marker_len(struct nand_bbt_descr *td)
/**
* read_bbt - [GENERIC] Read the bad block table starting from page
- * @chip: NAND chip object
+ * @this: NAND chip object
* @buf: temporary buffer
* @page: the starting page
* @num: the number of bbt descriptors to read
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 479c2f2cf17f..fa87ae28cdfe 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -304,24 +304,30 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
struct nand_device *nand = spinand_to_nand(spinand);
struct mtd_info *mtd = nanddev_to_mtd(nand);
struct nand_page_io_req adjreq = *req;
- unsigned int nbytes = 0;
- void *buf = NULL;
+ void *buf = spinand->databuf;
+ unsigned int nbytes;
u16 column = 0;
int ret;
- memset(spinand->databuf, 0xff,
- nanddev_page_size(nand) +
- nanddev_per_page_oobsize(nand));
+ /*
+ * Looks like PROGRAM LOAD (AKA write cache) does not necessarily reset
+ * the cache content to 0xFF (depends on vendor implementation), so we
+ * must fill the page cache entirely even if we only want to program
+ * the data portion of the page, otherwise we might corrupt the BBM or
+ * user data previously programmed in OOB area.
+ */
+ nbytes = nanddev_page_size(nand) + nanddev_per_page_oobsize(nand);
+ memset(spinand->databuf, 0xff, nbytes);
+ adjreq.dataoffs = 0;
+ adjreq.datalen = nanddev_page_size(nand);
+ adjreq.databuf.out = spinand->databuf;
+ adjreq.ooblen = nanddev_per_page_oobsize(nand);
+ adjreq.ooboffs = 0;
+ adjreq.oobbuf.out = spinand->oobbuf;
- if (req->datalen) {
+ if (req->datalen)
memcpy(spinand->databuf + req->dataoffs, req->databuf.out,
req->datalen);
- adjreq.dataoffs = 0;
- adjreq.datalen = nanddev_page_size(nand);
- adjreq.databuf.out = spinand->databuf;
- nbytes = adjreq.datalen;
- buf = spinand->databuf;
- }
if (req->ooblen) {
if (req->mode == MTD_OPS_AUTO_OOB)
@@ -332,14 +338,6 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
else
memcpy(spinand->oobbuf + req->ooboffs, req->oobbuf.out,
req->ooblen);
-
- adjreq.ooblen = nanddev_per_page_oobsize(nand);
- adjreq.ooboffs = 0;
- nbytes += nanddev_per_page_oobsize(nand);
- if (!buf) {
- buf = spinand->oobbuf;
- column = nanddev_page_size(nand);
- }
}
spinand_cache_op_adjust_colum(spinand, &adjreq, &column);
@@ -370,8 +368,8 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
/*
* We need to use the RANDOM LOAD CACHE operation if there's
- * more than one iteration, because the LOAD operation resets
- * the cache to 0xff.
+ * more than one iteration, because the LOAD operation might
+ * reset the cache to 0xff.
*/
if (nbytes) {
column = op.addr.val;
@@ -1018,11 +1016,11 @@ static int spinand_init(struct spinand_device *spinand)
for (i = 0; i < nand->memorg.ntargets; i++) {
ret = spinand_select_target(spinand, i);
if (ret)
- goto err_free_bufs;
+ goto err_manuf_cleanup;
ret = spinand_lock_block(spinand, BL_ALL_UNLOCKED);
if (ret)
- goto err_free_bufs;
+ goto err_manuf_cleanup;
}
ret = nanddev_init(nand, &spinand_ops, THIS_MODULE);