diff options
Diffstat (limited to 'drivers/net/can/usb/etas_es58x/es58x_core.h')
| -rw-r--r-- | drivers/net/can/usb/etas_es58x/es58x_core.h | 700 |
1 files changed, 700 insertions, 0 deletions
diff --git a/drivers/net/can/usb/etas_es58x/es58x_core.h b/drivers/net/can/usb/etas_es58x/es58x_core.h new file mode 100644 index 000000000000..fcf219e727bf --- /dev/null +++ b/drivers/net/can/usb/etas_es58x/es58x_core.h @@ -0,0 +1,700 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* Driver for ETAS GmbH ES58X USB CAN(-FD) Bus Interfaces. + * + * File es58x_core.h: All common definitions and declarations. + * + * Copyright (c) 2019 Robert Bosch Engineering and Business Solutions. All rights reserved. + * Copyright (c) 2020 ETAS K.K.. All rights reserved. + * Copyright (c) 2020, 2021 Vincent Mailhol <mailhol.vincent@wanadoo.fr> + */ + +#ifndef __ES58X_COMMON_H__ +#define __ES58X_COMMON_H__ + +#include <linux/types.h> +#include <linux/usb.h> +#include <linux/netdevice.h> +#include <linux/can.h> +#include <linux/can/dev.h> + +#include "es581_4.h" +#include "es58x_fd.h" + +/* Driver constants */ +#define ES58X_RX_URBS_MAX 5 /* Empirical value */ +#define ES58X_TX_URBS_MAX 6 /* Empirical value */ + +#define ES58X_MAX(param) \ + (ES581_4_##param > ES58X_FD_##param ? \ + ES581_4_##param : ES58X_FD_##param) +#define ES58X_TX_BULK_MAX ES58X_MAX(TX_BULK_MAX) +#define ES58X_RX_BULK_MAX ES58X_MAX(RX_BULK_MAX) +#define ES58X_ECHO_BULK_MAX ES58X_MAX(ECHO_BULK_MAX) +#define ES58X_NUM_CAN_CH_MAX ES58X_MAX(NUM_CAN_CH) + +/* Use this when channel index is irrelevant (e.g. device + * timestamp). + */ +#define ES58X_CHANNEL_IDX_NA 0xFF +#define ES58X_EMPTY_MSG NULL + +/* Threshold on consecutive CAN_STATE_ERROR_PASSIVE. If we receive + * ES58X_CONSECUTIVE_ERR_PASSIVE_MAX times the event + * ES58X_ERR_CRTL_PASSIVE in a row without any successful RX or TX, + * we force the device to switch to CAN_STATE_BUS_OFF state. + */ +#define ES58X_CONSECUTIVE_ERR_PASSIVE_MAX 254 + +/* A magic number sent by the ES581.4 to inform it is alive. */ +#define ES58X_HEARTBEAT 0x11 + +/** + * enum es58x_driver_info - Quirks of the device. + * @ES58X_DUAL_CHANNEL: Device has two CAN channels. If this flag is + * not set, it is implied that the device has only one CAN + * channel. + * @ES58X_FD_FAMILY: Device is CAN-FD capable. If this flag is not + * set, the device only supports classical CAN. + */ +enum es58x_driver_info { + ES58X_DUAL_CHANNEL = BIT(0), + ES58X_FD_FAMILY = BIT(1) +}; + +enum es58x_echo { + ES58X_ECHO_OFF = 0, + ES58X_ECHO_ON = 1 +}; + +/** + * enum es58x_physical_layer - Type of the physical layer. + * @ES58X_PHYSICAL_LAYER_HIGH_SPEED: High-speed CAN (c.f. ISO + * 11898-2). + * + * Some products of the ETAS portfolio also support low-speed CAN + * (c.f. ISO 11898-3). However, all the devices in scope of this + * driver do not support the option, thus, the enum has only one + * member. + */ +enum es58x_physical_layer { + ES58X_PHYSICAL_LAYER_HIGH_SPEED = 1 +}; + +enum es58x_samples_per_bit { + ES58X_SAMPLES_PER_BIT_ONE = 1, + ES58X_SAMPLES_PER_BIT_THREE = 2 +}; + +/** + * enum es58x_sync_edge - Synchronization method. + * @ES58X_SYNC_EDGE_SINGLE: ISO CAN specification defines the use of a + * single edge synchronization. The synchronization should be + * done on recessive to dominant level change. + * + * For information, ES582.1 and ES584.1 also support a double + * synchronization, requiring both recessive to dominant then dominant + * to recessive level change. However, this is not supported in + * SocketCAN framework, thus, the enum has only one member. + */ +enum es58x_sync_edge { + ES58X_SYNC_EDGE_SINGLE = 1 +}; + +/** + * enum es58x_flag - CAN flags for RX/TX messages. + * @ES58X_FLAG_EFF: Extended Frame Format (EFF). + * @ES58X_FLAG_RTR: Remote Transmission Request (RTR). + * @ES58X_FLAG_FD_BRS: Bit rate switch (BRS): second bitrate for + * payload data. + * @ES58X_FLAG_FD_ESI: Error State Indicator (ESI): tell if the + * transmitting node is in error passive mode. + * @ES58X_FLAG_FD_DATA: CAN FD frame. + */ +enum es58x_flag { + ES58X_FLAG_EFF = BIT(0), + ES58X_FLAG_RTR = BIT(1), + ES58X_FLAG_FD_BRS = BIT(3), + ES58X_FLAG_FD_ESI = BIT(5), + ES58X_FLAG_FD_DATA = BIT(6) +}; + +/** + * enum es58x_err - CAN error detection. + * @ES58X_ERR_OK: No errors. + * @ES58X_ERR_PROT_STUFF: Bit stuffing error: more than 5 consecutive + * equal bits. + * @ES58X_ERR_PROT_FORM: Frame format error. + * @ES58X_ERR_ACK: Received no ACK on transmission. + * @ES58X_ERR_PROT_BIT: Single bit error. + * @ES58X_ERR_PROT_CRC: Incorrect 15, 17 or 21 bits CRC. + * @ES58X_ERR_PROT_BIT1: Unable to send recessive bit: tried to send + * recessive bit 1 but monitored dominant bit 0. + * @ES58X_ERR_PROT_BIT0: Unable to send dominant bit: tried to send + * dominant bit 0 but monitored recessive bit 1. + * @ES58X_ERR_PROT_OVERLOAD: Bus overload. + * @ES58X_ERR_PROT_UNSPEC: Unspecified. + * + * Please refer to ISO 11898-1:2015, section 10.11 "Error detection" + * and section 10.13 "Overload signaling" for additional details. + */ +enum es58x_err { + ES58X_ERR_OK = 0, + ES58X_ERR_PROT_STUFF = BIT(0), + ES58X_ERR_PROT_FORM = BIT(1), + ES58X_ERR_ACK = BIT(2), + ES58X_ERR_PROT_BIT = BIT(3), + ES58X_ERR_PROT_CRC = BIT(4), + ES58X_ERR_PROT_BIT1 = BIT(5), + ES58X_ERR_PROT_BIT0 = BIT(6), + ES58X_ERR_PROT_OVERLOAD = BIT(7), + ES58X_ERR_PROT_UNSPEC = BIT(31) +}; + +/** + * enum es58x_event - CAN error codes returned by the device. + * @ES58X_EVENT_OK: No errors. + * @ES58X_EVENT_CRTL_ACTIVE: Active state: both TR and RX error count + * is less than 128. + * @ES58X_EVENT_CRTL_PASSIVE: Passive state: either TX or RX error + * count is greater than 127. + * @ES58X_EVENT_CRTL_WARNING: Warning state: either TX or RX error + * count is greater than 96. + * @ES58X_EVENT_BUSOFF: Bus off. + * @ES58X_EVENT_SINGLE_WIRE: Lost connection on either CAN high or CAN + * low. + * + * Please refer to ISO 11898-1:2015, section 12.1.4 "Rules of fault + * confinement" for additional details. + */ +enum es58x_event { + ES58X_EVENT_OK = 0, + ES58X_EVENT_CRTL_ACTIVE = BIT(0), + ES58X_EVENT_CRTL_PASSIVE = BIT(1), + ES58X_EVENT_CRTL_WARNING = BIT(2), + ES58X_EVENT_BUSOFF = BIT(3), + ES58X_EVENT_SINGLE_WIRE = BIT(4) +}; + +/* enum es58x_ret_u8 - Device return error codes, 8 bit format. + * + * Specific to ES581.4. + */ +enum es58x_ret_u8 { + ES58X_RET_U8_OK = 0x00, + ES58X_RET_U8_ERR_UNSPECIFIED_FAILURE = 0x80, + ES58X_RET_U8_ERR_NO_MEM = 0x81, + ES58X_RET_U8_ERR_BAD_CRC = 0x99 +}; + +/* enum es58x_ret_u32 - Device return error codes, 32 bit format. + */ +enum es58x_ret_u32 { + ES58X_RET_U32_OK = 0x00000000UL, + ES58X_RET_U32_ERR_UNSPECIFIED_FAILURE = 0x80000000UL, + ES58X_RET_U32_ERR_NO_MEM = 0x80004001UL, + ES58X_RET_U32_WARN_PARAM_ADJUSTED = 0x40004000UL, + ES58X_RET_U32_WARN_TX_MAYBE_REORDER = 0x40004001UL, + ES58X_RET_U32_ERR_TIMEDOUT = 0x80000008UL, + ES58X_RET_U32_ERR_FIFO_FULL = 0x80003002UL, + ES58X_RET_U32_ERR_BAD_CONFIG = 0x80004000UL, + ES58X_RET_U32_ERR_NO_RESOURCE = 0x80004002UL +}; + +/* enum es58x_ret_type - Type of the command returned by the ES58X + * device. + */ +enum es58x_ret_type { + ES58X_RET_TYPE_SET_BITTIMING, + ES58X_RET_TYPE_ENABLE_CHANNEL, + ES58X_RET_TYPE_DISABLE_CHANNEL, + ES58X_RET_TYPE_TX_MSG, + ES58X_RET_TYPE_RESET_RX, + ES58X_RET_TYPE_RESET_TX, + ES58X_RET_TYPE_DEVICE_ERR +}; + +union es58x_urb_cmd { + struct es581_4_urb_cmd es581_4_urb_cmd; + struct es58x_fd_urb_cmd es58x_fd_urb_cmd; + struct { /* Common header parts of all variants */ + __le16 sof; + u8 cmd_type; + u8 cmd_id; + } __packed; + u8 raw_cmd[0]; +}; + +/** + * struct es58x_priv - All information specific to a CAN channel. + * @can: struct can_priv must be the first member (Socket CAN relies + * on the fact that function netdev_priv() returns a pointer to + * a struct can_priv). + * @es58x_dev: pointer to the corresponding ES58X device. + * @tx_urb: Used as a buffer to concatenate the TX messages and to do + * a bulk send. Please refer to es58x_start_xmit() for more + * details. + * @tx_tail: Index of the oldest packet still pending for + * completion. @tx_tail & echo_skb_mask represents the beginning + * of the echo skb FIFO, i.e. index of the first element. + * @tx_head: Index of the next packet to be sent to the + * device. @tx_head & echo_skb_mask represents the end of the + * echo skb FIFO plus one, i.e. the first free index. + * @tx_can_msg_cnt: Number of messages in @tx_urb. + * @tx_can_msg_is_fd: false: all messages in @tx_urb are Classical + * CAN, true: all messages in @tx_urb are CAN FD. Rationale: + * ES58X FD devices do not allow to mix Classical CAN and FD CAN + * frames in one single bulk transmission. + * @err_passive_before_rtx_success: The ES58X device might enter in a + * state in which it keeps alternating between error passive + * and active states. This counter keeps track of the number of + * error passive and if it gets bigger than + * ES58X_CONSECUTIVE_ERR_PASSIVE_MAX, es58x_rx_err_msg() will + * force the status to bus-off. + * @channel_idx: Channel index, starts at zero. + */ +struct es58x_priv { + struct can_priv can; + struct es58x_device *es58x_dev; + struct urb *tx_urb; + + u32 tx_tail; + u32 tx_head; + + u8 tx_can_msg_cnt; + bool tx_can_msg_is_fd; + + u8 err_passive_before_rtx_success; + + u8 channel_idx; +}; + +/** + * struct es58x_parameters - Constant parameters of a given hardware + * variant. + * @bittiming_const: Nominal bittimming constant parameters. + * @data_bittiming_const: Data bittiming constant parameters. + * @tdc_const: Transmission Delay Compensation constant parameters. + * @bitrate_max: Maximum bitrate supported by the device. + * @clock: CAN clock parameters. + * @ctrlmode_supported: List of supported modes. Please refer to + * can/netlink.h file for additional details. + * @tx_start_of_frame: Magic number at the beginning of each TX URB + * command. + * @rx_start_of_frame: Magic number at the beginning of each RX URB + * command. + * @tx_urb_cmd_max_len: Maximum length of a TX URB command. + * @rx_urb_cmd_max_len: Maximum length of a RX URB command. + * @fifo_mask: Bit mask to quickly convert the tx_tail and tx_head + * field of the struct es58x_priv into echo_skb + * indexes. Properties: @fifo_mask = echos_skb_max - 1 where + * echo_skb_max must be a power of two. Also, echo_skb_max must + * not exceed the maximum size of the device internal TX FIFO + * length. This parameter is used to control the network queue + * wake/stop logic. + * @dql_min_limit: Dynamic Queue Limits (DQL) absolute minimum limit + * of bytes allowed to be queued on this network device transmit + * queue. Used by the Byte Queue Limits (BQL) to determine how + * frequently the xmit_more flag will be set to true in + * es58x_start_xmit(). Set this value higher to optimize for + * throughput but be aware that it might have a negative impact + * on the latency! This value can also be set dynamically. Please + * refer to Documentation/ABI/testing/sysfs-class-net-queues for + * more details. + * @tx_bulk_max: Maximum number of TX messages that can be sent in one + * single URB packet. + * @urb_cmd_header_len: Length of the URB command header. + * @rx_urb_max: Number of RX URB to be allocated during device probe. + * @tx_urb_max: Number of TX URB to be allocated during device probe. + */ +struct es58x_parameters { + const struct can_bittiming_const *bittiming_const; + const struct can_bittiming_const *data_bittiming_const; + const struct can_tdc_const *tdc_const; + u32 bitrate_max; + struct can_clock clock; + u32 ctrlmode_supported; + u16 tx_start_of_frame; + u16 rx_start_of_frame; + u16 tx_urb_cmd_max_len; + u16 rx_urb_cmd_max_len; + u16 fifo_mask; + u16 dql_min_limit; + u8 tx_bulk_max; + u8 urb_cmd_header_len; + u8 rx_urb_max; + u8 tx_urb_max; +}; + +/** + * struct es58x_operators - Function pointers used to encode/decode + * the TX/RX messages. + * @get_msg_len: Get field msg_len of the urb_cmd. The offset of + * msg_len inside urb_cmd depends of the device model. + * @handle_urb_cmd: Decode the URB command received from the device + * and dispatch it to the relevant sub function. + * @fill_urb_header: Fill the header of urb_cmd. + * @tx_can_msg: Encode a TX CAN message and add it to the bulk buffer + * cmd_buf of es58x_dev. + * @enable_channel: Start the CAN channel. + * @disable_channel: Stop the CAN channel. + * @reset_device: Full reset of the device. N.B: this feature is only + * present on the ES581.4. For ES58X FD devices, this field is + * set to NULL. + * @get_timestamp: Request a timestamp from the ES58X device. + */ +struct es58x_operators { + u16 (*get_msg_len)(const union es58x_urb_cmd *urb_cmd); + int (*handle_urb_cmd)(struct es58x_device *es58x_dev, + const union es58x_urb_cmd *urb_cmd); + void (*fill_urb_header)(union es58x_urb_cmd *urb_cmd, u8 cmd_type, + u8 cmd_id, u8 channel_idx, u16 cmd_len); + int (*tx_can_msg)(struct es58x_priv *priv, const struct sk_buff *skb); + int (*enable_channel)(struct es58x_priv *priv); + int (*disable_channel)(struct es58x_priv *priv); + int (*reset_device)(struct es58x_device *es58x_dev); + int (*get_timestamp)(struct es58x_device *es58x_dev); +}; + +/** + * struct es58x_device - All information specific to an ES58X device. + * @dev: Device information. + * @udev: USB device information. + * @netdev: Array of our CAN channels. + * @param: The constant parameters. + * @ops: Operators. + * @rx_pipe: USB reception pipe. + * @tx_pipe: USB transmission pipe. + * @rx_urbs: Anchor for received URBs. + * @tx_urbs_busy: Anchor for TX URBs which were send to the device. + * @tx_urbs_idle: Anchor for TX USB which are idle. This driver + * allocates the memory for the URBs during the probe. When a TX + * URB is needed, it can be taken from this anchor. The network + * queue wake/stop logic should prevent this URB from getting + * empty. Please refer to es58x_get_tx_urb() for more details. + * @tx_urbs_idle_cnt: number of urbs in @tx_urbs_idle. + * @opened_channel_cnt: number of channels opened (c.f. es58x_open() + * and es58x_stop()). + * @ktime_req_ns: kernel timestamp when es58x_set_realtime_diff_ns() + * was called. + * @realtime_diff_ns: difference in nanoseconds between the clocks of + * the ES58X device and the kernel. + * @timestamps: a temporary buffer to store the time stamps before + * feeding them to es58x_can_get_echo_skb(). Can only be used + * in RX branches. + * @rx_max_packet_size: Maximum length of bulk-in URB. + * @num_can_ch: Number of CAN channel (i.e. number of elements of @netdev). + * @rx_cmd_buf_len: Length of @rx_cmd_buf. + * @rx_cmd_buf: The device might split the URB commands in an + * arbitrary amount of pieces. This buffer is used to concatenate + * all those pieces. Can only be used in RX branches. This field + * has to be the last one of the structure because it is has a + * flexible size (c.f. es58x_sizeof_es58x_device() function). + */ +struct es58x_device { + struct device *dev; + struct usb_device *udev; + struct net_device *netdev[ES58X_NUM_CAN_CH_MAX]; + + const struct es58x_parameters *param; + const struct es58x_operators *ops; + + int rx_pipe; + int tx_pipe; + + struct usb_anchor rx_urbs; + struct usb_anchor tx_urbs_busy; + struct usb_anchor tx_urbs_idle; + atomic_t tx_urbs_idle_cnt; + atomic_t opened_channel_cnt; + + u64 ktime_req_ns; + s64 realtime_diff_ns; + + u64 timestamps[ES58X_ECHO_BULK_MAX]; + + u16 rx_max_packet_size; + u8 num_can_ch; + + u16 rx_cmd_buf_len; + union es58x_urb_cmd rx_cmd_buf; +}; + +/** + * es58x_sizeof_es58x_device() - Calculate the maximum length of + * struct es58x_device. + * @es58x_dev_param: The constant parameters of the device. + * + * The length of struct es58x_device depends on the length of its last + * field: rx_cmd_buf. This macro allows to optimize the memory + * allocation. + * + * Return: length of struct es58x_device. + */ +static inline size_t es58x_sizeof_es58x_device(const struct es58x_parameters + *es58x_dev_param) +{ + return offsetof(struct es58x_device, rx_cmd_buf) + + es58x_dev_param->rx_urb_cmd_max_len; +} + +static inline int __es58x_check_msg_len(const struct device *dev, + const char *stringified_msg, + size_t actual_len, size_t expected_len) +{ + if (expected_len != actual_len) { + dev_err(dev, + "Length of %s is %zu but received command is %zu.\n", + stringified_msg, expected_len, actual_len); + return -EMSGSIZE; + } + return 0; +} + +/** + * es58x_check_msg_len() - Check the size of a received message. + * @dev: Device, used to print error messages. + * @msg: Received message, must not be a pointer. + * @actual_len: Length of the message as advertised in the command header. + * + * Must be a macro in order to accept the different types of messages + * as an input. Can be use with any of the messages which have a fixed + * length. Check for an exact match of the size. + * + * Return: zero on success, -EMSGSIZE if @actual_len differs from the + * expected length. + */ +#define es58x_check_msg_len(dev, msg, actual_len) \ + __es58x_check_msg_len(dev, __stringify(msg), \ + actual_len, sizeof(msg)) + +static inline int __es58x_check_msg_max_len(const struct device *dev, + const char *stringified_msg, + size_t actual_len, + size_t expected_len) +{ + if (actual_len > expected_len) { + dev_err(dev, + "Maximum length for %s is %zu but received command is %zu.\n", + stringified_msg, expected_len, actual_len); + return -EOVERFLOW; + } + return 0; +} + +/** + * es58x_check_msg_max_len() - Check the maximum size of a received message. + * @dev: Device, used to print error messages. + * @msg: Received message, must not be a pointer. + * @actual_len: Length of the message as advertised in the command header. + * + * Must be a macro in order to accept the different types of messages + * as an input. To be used with the messages of variable sizes. Only + * check that the message is not bigger than the maximum expected + * size. + * + * Return: zero on success, -EOVERFLOW if @actual_len is greater than + * the expected length. + */ +#define es58x_check_msg_max_len(dev, msg, actual_len) \ + __es58x_check_msg_max_len(dev, __stringify(msg), \ + actual_len, sizeof(msg)) + +static inline int __es58x_msg_num_element(const struct device *dev, + const char *stringified_msg, + size_t actual_len, size_t msg_len, + size_t elem_len) +{ + size_t actual_num_elem = actual_len / elem_len; + size_t expected_num_elem = msg_len / elem_len; + + if (actual_num_elem == 0) { + dev_err(dev, + "Minimum length for %s is %zu but received command is %zu.\n", + stringified_msg, elem_len, actual_len); + return -EMSGSIZE; + } else if ((actual_len % elem_len) != 0) { + dev_err(dev, + "Received command length: %zu is not a multiple of %s[0]: %zu\n", + actual_len, stringified_msg, elem_len); + return -EMSGSIZE; + } else if (actual_num_elem > expected_num_elem) { + dev_err(dev, + "Array %s is supposed to have %zu elements each of size %zu...\n", + stringified_msg, expected_num_elem, elem_len); + dev_err(dev, + "... But received command has %zu elements (total length %zu).\n", + actual_num_elem, actual_len); + return -EOVERFLOW; + } + return actual_num_elem; +} + +/** + * es58x_msg_num_element() - Check size and give the number of + * elements in a message of array type. + * @dev: Device, used to print error messages. + * @msg: Received message, must be an array. + * @actual_len: Length of the message as advertised in the command + * header. + * + * Must be a macro in order to accept the different types of messages + * as an input. To be used on message of array type. Array's element + * has to be of fixed size (else use es58x_check_msg_max_len()). Check + * that the total length is an exact multiple of the length of a + * single element. + * + * Return: number of elements in the array on success, -EOVERFLOW if + * @actual_len is greater than the expected length, -EMSGSIZE if + * @actual_len is not a multiple of a single element. + */ +#define es58x_msg_num_element(dev, msg, actual_len) \ +({ \ + size_t __elem_len = sizeof((msg)[0]) + __must_be_array(msg); \ + __es58x_msg_num_element(dev, __stringify(msg), actual_len, \ + sizeof(msg), __elem_len); \ +}) + +/** + * es58x_priv() - Get the priv member and cast it to struct es58x_priv. + * @netdev: CAN network device. + * + * Return: ES58X device. + */ +static inline struct es58x_priv *es58x_priv(struct net_device *netdev) +{ + return (struct es58x_priv *)netdev_priv(netdev); +} + +/** + * ES58X_SIZEOF_URB_CMD() - Calculate the maximum length of an urb + * command for a given message field name. + * @es58x_urb_cmd_type: type (either "struct es581_4_urb_cmd" or + * "struct es58x_fd_urb_cmd"). + * @msg_field: name of the message field. + * + * Must be a macro in order to accept the different command types as + * an input. + * + * Return: length of the urb command. + */ +#define ES58X_SIZEOF_URB_CMD(es58x_urb_cmd_type, msg_field) \ + (offsetof(es58x_urb_cmd_type, raw_msg) \ + + sizeof_field(es58x_urb_cmd_type, msg_field) \ + + sizeof_field(es58x_urb_cmd_type, \ + reserved_for_crc16_do_not_use)) + +/** + * es58x_get_urb_cmd_len() - Calculate the actual length of an urb + * command for a given message length. + * @es58x_dev: ES58X device. + * @msg_len: Length of the message. + * + * Add the header and CRC lengths to the message length. + * + * Return: length of the urb command. + */ +static inline size_t es58x_get_urb_cmd_len(struct es58x_device *es58x_dev, + u16 msg_len) +{ + return es58x_dev->param->urb_cmd_header_len + msg_len + sizeof(u16); +} + +/** + * es58x_get_netdev() - Get the network device. + * @es58x_dev: ES58X device. + * @channel_no: The channel number as advertised in the urb command. + * @channel_idx_offset: Some of the ES58x starts channel numbering + * from 0 (ES58X FD), others from 1 (ES581.4). + * @netdev: CAN network device. + * + * Do a sanity check on the index provided by the device. + * + * Return: zero on success, -ECHRNG if the received channel number is + * out of range and -ENODEV if the network device is not yet + * configured. + */ +static inline int es58x_get_netdev(struct es58x_device *es58x_dev, + int channel_no, int channel_idx_offset, + struct net_device **netdev) +{ + int channel_idx = channel_no - channel_idx_offset; + + *netdev = NULL; + if (channel_idx < 0 || channel_idx >= es58x_dev->num_can_ch) + return -ECHRNG; + + *netdev = es58x_dev->netdev[channel_idx]; + if (!*netdev || !netif_device_present(*netdev)) + return -ENODEV; + + return 0; +} + +/** + * es58x_get_raw_can_id() - Get the CAN ID. + * @cf: CAN frame. + * + * Mask the CAN ID in order to only keep the significant bits. + * + * Return: the raw value of the CAN ID. + */ +static inline int es58x_get_raw_can_id(const struct can_frame *cf) +{ + if (cf->can_id & CAN_EFF_FLAG) + return cf->can_id & CAN_EFF_MASK; + else + return cf->can_id & CAN_SFF_MASK; +} + +/** + * es58x_get_flags() - Get the CAN flags. + * @skb: socket buffer of a CAN message. + * + * Return: the CAN flag as an enum es58x_flag. + */ +static inline enum es58x_flag es58x_get_flags(const struct sk_buff *skb) +{ + struct canfd_frame *cf = (struct canfd_frame *)skb->data; + enum es58x_flag es58x_flags = 0; + + if (cf->can_id & CAN_EFF_FLAG) + es58x_flags |= ES58X_FLAG_EFF; + + if (can_is_canfd_skb(skb)) { + es58x_flags |= ES58X_FLAG_FD_DATA; + if (cf->flags & CANFD_BRS) + es58x_flags |= ES58X_FLAG_FD_BRS; + if (cf->flags & CANFD_ESI) + es58x_flags |= ES58X_FLAG_FD_ESI; + } else if (cf->can_id & CAN_RTR_FLAG) + /* Remote frames are only defined in Classical CAN frames */ + es58x_flags |= ES58X_FLAG_RTR; + + return es58x_flags; +} + +int es58x_can_get_echo_skb(struct net_device *netdev, u32 packet_idx, + u64 *tstamps, unsigned int pkts); +int es58x_tx_ack_msg(struct net_device *netdev, u16 tx_free_entries, + enum es58x_ret_u32 rx_cmd_ret_u32); +int es58x_rx_can_msg(struct net_device *netdev, u64 timestamp, const u8 *data, + canid_t can_id, enum es58x_flag es58x_flags, u8 dlc); +int es58x_rx_err_msg(struct net_device *netdev, enum es58x_err error, + enum es58x_event event, u64 timestamp); +void es58x_rx_timestamp(struct es58x_device *es58x_dev, u64 timestamp); +int es58x_rx_cmd_ret_u8(struct device *dev, enum es58x_ret_type cmd_ret_type, + enum es58x_ret_u8 rx_cmd_ret_u8); +int es58x_rx_cmd_ret_u32(struct net_device *netdev, + enum es58x_ret_type cmd_ret_type, + enum es58x_ret_u32 rx_cmd_ret_u32); +int es58x_send_msg(struct es58x_device *es58x_dev, u8 cmd_type, u8 cmd_id, + const void *msg, u16 cmd_len, int channel_idx); + +extern const struct es58x_parameters es581_4_param; +extern const struct es58x_operators es581_4_ops; + +extern const struct es58x_parameters es58x_fd_param; +extern const struct es58x_operators es58x_fd_ops; + +#endif /* __ES58X_COMMON_H__ */ |