summaryrefslogtreecommitdiff
path: root/drivers/net/can/usb/ucan.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/can/usb/ucan.c')
-rw-r--r--drivers/net/can/usb/ucan.c1613
1 files changed, 1613 insertions, 0 deletions
diff --git a/drivers/net/can/usb/ucan.c b/drivers/net/can/usb/ucan.c
new file mode 100644
index 000000000000..0678a38b1af4
--- /dev/null
+++ b/drivers/net/can/usb/ucan.c
@@ -0,0 +1,1613 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* Driver for Theobroma Systems UCAN devices, Protocol Version 3
+ *
+ * Copyright (C) 2018 Theobroma Systems Design und Consulting GmbH
+ *
+ *
+ * General Description:
+ *
+ * The USB Device uses three Endpoints:
+ *
+ * CONTROL Endpoint: Is used the setup the device (start, stop,
+ * info, configure).
+ *
+ * IN Endpoint: The device sends CAN Frame Messages and Device
+ * Information using the IN endpoint.
+ *
+ * OUT Endpoint: The driver sends configuration requests, and CAN
+ * Frames on the out endpoint.
+ *
+ * Error Handling:
+ *
+ * If error reporting is turned on the device encodes error into CAN
+ * error frames (see uapi/linux/can/error.h) and sends it using the
+ * IN Endpoint. The driver updates statistics and forward it.
+ */
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/signal.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+
+#define UCAN_DRIVER_NAME "ucan"
+#define UCAN_MAX_RX_URBS 8
+/* the CAN controller needs a while to enable/disable the bus */
+#define UCAN_USB_CTL_PIPE_TIMEOUT 1000
+/* this driver currently supports protocol version 3 only */
+#define UCAN_PROTOCOL_VERSION_MIN 3
+#define UCAN_PROTOCOL_VERSION_MAX 3
+
+/* UCAN Message Definitions
+ * ------------------------
+ *
+ * ucan_message_out_t and ucan_message_in_t define the messages
+ * transmitted on the OUT and IN endpoint.
+ *
+ * Multibyte fields are transmitted with little endianness
+ *
+ * INTR Endpoint: a single uint32_t storing the current space in the fifo
+ *
+ * OUT Endpoint: single message of type ucan_message_out_t is
+ * transmitted on the out endpoint
+ *
+ * IN Endpoint: multiple messages ucan_message_in_t concateted in
+ * the following way:
+ *
+ * m[n].len <=> the length if message n(including the header in bytes)
+ * m[n] is is aligned to a 4 byte boundary, hence
+ * offset(m[0]) := 0;
+ * offset(m[n+1]) := offset(m[n]) + (m[n].len + 3) & 3
+ *
+ * this implies that
+ * offset(m[n]) % 4 <=> 0
+ */
+
+/* Device Global Commands */
+enum {
+ UCAN_DEVICE_GET_FW_STRING = 0,
+};
+
+/* UCAN Commands */
+enum {
+ /* start the can transceiver - val defines the operation mode */
+ UCAN_COMMAND_START = 0,
+ /* cancel pending transmissions and stop the can transceiver */
+ UCAN_COMMAND_STOP = 1,
+ /* send can transceiver into low-power sleep mode */
+ UCAN_COMMAND_SLEEP = 2,
+ /* wake up can transceiver from low-power sleep mode */
+ UCAN_COMMAND_WAKEUP = 3,
+ /* reset the can transceiver */
+ UCAN_COMMAND_RESET = 4,
+ /* get piece of info from the can transceiver - subcmd defines what
+ * piece
+ */
+ UCAN_COMMAND_GET = 5,
+ /* clear or disable hardware filter - subcmd defines which of the two */
+ UCAN_COMMAND_FILTER = 6,
+ /* Setup bittiming */
+ UCAN_COMMAND_SET_BITTIMING = 7,
+ /* recover from bus-off state */
+ UCAN_COMMAND_RESTART = 8,
+};
+
+/* UCAN_COMMAND_START and UCAN_COMMAND_GET_INFO operation modes (bitmap).
+ * Undefined bits must be set to 0.
+ */
+enum {
+ UCAN_MODE_LOOPBACK = BIT(0),
+ UCAN_MODE_SILENT = BIT(1),
+ UCAN_MODE_3_SAMPLES = BIT(2),
+ UCAN_MODE_ONE_SHOT = BIT(3),
+ UCAN_MODE_BERR_REPORT = BIT(4),
+};
+
+/* UCAN_COMMAND_GET subcommands */
+enum {
+ UCAN_COMMAND_GET_INFO = 0,
+ UCAN_COMMAND_GET_PROTOCOL_VERSION = 1,
+};
+
+/* UCAN_COMMAND_FILTER subcommands */
+enum {
+ UCAN_FILTER_CLEAR = 0,
+ UCAN_FILTER_DISABLE = 1,
+ UCAN_FILTER_ENABLE = 2,
+};
+
+/* OUT endpoint message types */
+enum {
+ UCAN_OUT_TX = 2, /* transmit a CAN frame */
+};
+
+/* IN endpoint message types */
+enum {
+ UCAN_IN_TX_COMPLETE = 1, /* CAN frame transmission completed */
+ UCAN_IN_RX = 2, /* CAN frame received */
+};
+
+struct ucan_ctl_cmd_start {
+ __le16 mode; /* OR-ing any of UCAN_MODE_* */
+} __packed;
+
+struct ucan_ctl_cmd_set_bittiming {
+ __le32 tq; /* Time quanta (TQ) in nanoseconds */
+ __le16 brp; /* TQ Prescaler */
+ __le16 sample_point; /* Samplepoint on tenth percent */
+ u8 prop_seg; /* Propagation segment in TQs */
+ u8 phase_seg1; /* Phase buffer segment 1 in TQs */
+ u8 phase_seg2; /* Phase buffer segment 2 in TQs */
+ u8 sjw; /* Synchronisation jump width in TQs */
+} __packed;
+
+struct ucan_ctl_cmd_device_info {
+ __le32 freq; /* Clock Frequency for tq generation */
+ u8 tx_fifo; /* Size of the transmission fifo */
+ u8 sjw_max; /* can_bittiming fields... */
+ u8 tseg1_min;
+ u8 tseg1_max;
+ u8 tseg2_min;
+ u8 tseg2_max;
+ __le16 brp_inc;
+ __le32 brp_min;
+ __le32 brp_max; /* ...can_bittiming fields */
+ __le16 ctrlmodes; /* supported control modes */
+ __le16 hwfilter; /* Number of HW filter banks */
+ __le16 rxmboxes; /* Number of receive Mailboxes */
+} __packed;
+
+struct ucan_ctl_cmd_get_protocol_version {
+ __le32 version;
+} __packed;
+
+union ucan_ctl_payload {
+ /* Setup Bittiming
+ * bmRequest == UCAN_COMMAND_START
+ */
+ struct ucan_ctl_cmd_start cmd_start;
+ /* Setup Bittiming
+ * bmRequest == UCAN_COMMAND_SET_BITTIMING
+ */
+ struct ucan_ctl_cmd_set_bittiming cmd_set_bittiming;
+ /* Get Device Information
+ * bmRequest == UCAN_COMMAND_GET; wValue = UCAN_COMMAND_GET_INFO
+ */
+ struct ucan_ctl_cmd_device_info cmd_get_device_info;
+ /* Get Protocol Version
+ * bmRequest == UCAN_COMMAND_GET;
+ * wValue = UCAN_COMMAND_GET_PROTOCOL_VERSION
+ */
+ struct ucan_ctl_cmd_get_protocol_version cmd_get_protocol_version;
+
+ u8 raw[128];
+} __packed;
+
+enum {
+ UCAN_TX_COMPLETE_SUCCESS = BIT(0),
+};
+
+/* Transmission Complete within ucan_message_in */
+struct ucan_tx_complete_entry_t {
+ u8 echo_index;
+ u8 flags;
+} __packed __aligned(0x2);
+
+/* CAN Data message format within ucan_message_in/out */
+struct ucan_can_msg {
+ /* note DLC is computed by
+ * msg.len - sizeof (msg.len)
+ * - sizeof (msg.type)
+ * - sizeof (msg.can_msg.id)
+ */
+ __le32 id;
+
+ union {
+ u8 data[CAN_MAX_DLEN]; /* Data of CAN frames */
+ u8 dlc; /* RTR dlc */
+ };
+} __packed;
+
+/* OUT Endpoint, outbound messages */
+struct ucan_message_out {
+ __le16 len; /* Length of the content include header */
+ u8 type; /* UCAN_OUT_TX and friends */
+ u8 subtype; /* command sub type */
+
+ union {
+ /* Transmit CAN frame
+ * (type == UCAN_TX) && ((msg.can_msg.id & CAN_RTR_FLAG) == 0)
+ * subtype stores the echo id
+ */
+ struct ucan_can_msg can_msg;
+ } msg;
+} __packed __aligned(0x4);
+
+/* IN Endpoint, inbound messages */
+struct ucan_message_in {
+ __le16 len; /* Length of the content include header */
+ u8 type; /* UCAN_IN_RX and friends */
+ u8 subtype; /* command sub type */
+
+ union {
+ /* CAN Frame received
+ * (type == UCAN_IN_RX)
+ * && ((msg.can_msg.id & CAN_RTR_FLAG) == 0)
+ */
+ struct ucan_can_msg can_msg;
+
+ /* CAN transmission complete
+ * (type == UCAN_IN_TX_COMPLETE)
+ */
+ struct ucan_tx_complete_entry_t can_tx_complete_msg[0];
+ } __aligned(0x4) msg;
+} __packed;
+
+/* Macros to calculate message lengths */
+#define UCAN_OUT_HDR_SIZE offsetof(struct ucan_message_out, msg)
+
+#define UCAN_IN_HDR_SIZE offsetof(struct ucan_message_in, msg)
+#define UCAN_IN_LEN(member) (UCAN_OUT_HDR_SIZE + sizeof(member))
+
+struct ucan_priv;
+
+/* Context Information for transmission URBs */
+struct ucan_urb_context {
+ struct ucan_priv *up;
+ u8 dlc;
+ bool allocated;
+};
+
+/* Information reported by the USB device */
+struct ucan_device_info {
+ struct can_bittiming_const bittiming_const;
+ u8 tx_fifo;
+};
+
+/* Driver private data */
+struct ucan_priv {
+ /* must be the first member */
+ struct can_priv can;
+
+ /* linux USB device structures */
+ struct usb_device *udev;
+ struct usb_interface *intf;
+ struct net_device *netdev;
+
+ /* lock for can->echo_skb (used around
+ * can_put/get/free_echo_skb
+ */
+ spinlock_t echo_skb_lock;
+
+ /* usb device information information */
+ u8 intf_index;
+ u8 in_ep_addr;
+ u8 out_ep_addr;
+ u16 in_ep_size;
+
+ /* transmission and reception buffers */
+ struct usb_anchor rx_urbs;
+ struct usb_anchor tx_urbs;
+
+ union ucan_ctl_payload *ctl_msg_buffer;
+ struct ucan_device_info device_info;
+
+ /* transmission control information and locks */
+ spinlock_t context_lock;
+ unsigned int available_tx_urbs;
+ struct ucan_urb_context *context_array;
+};
+
+static u8 ucan_get_can_dlc(struct ucan_can_msg *msg, u16 len)
+{
+ if (le32_to_cpu(msg->id) & CAN_RTR_FLAG)
+ return get_can_dlc(msg->dlc);
+ else
+ return get_can_dlc(len - (UCAN_IN_HDR_SIZE + sizeof(msg->id)));
+}
+
+static void ucan_release_context_array(struct ucan_priv *up)
+{
+ if (!up->context_array)
+ return;
+
+ /* lock is not needed because, driver is currently opening or closing */
+ up->available_tx_urbs = 0;
+
+ kfree(up->context_array);
+ up->context_array = NULL;
+}
+
+static int ucan_alloc_context_array(struct ucan_priv *up)
+{
+ int i;
+
+ /* release contexts if any */
+ ucan_release_context_array(up);
+
+ up->context_array = kcalloc(up->device_info.tx_fifo,
+ sizeof(*up->context_array),
+ GFP_KERNEL);
+ if (!up->context_array) {
+ netdev_err(up->netdev,
+ "Not enough memory to allocate tx contexts\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < up->device_info.tx_fifo; i++) {
+ up->context_array[i].allocated = false;
+ up->context_array[i].up = up;
+ }
+
+ /* lock is not needed because, driver is currently opening */
+ up->available_tx_urbs = up->device_info.tx_fifo;
+
+ return 0;
+}
+
+static struct ucan_urb_context *ucan_alloc_context(struct ucan_priv *up)
+{
+ int i;
+ unsigned long flags;
+ struct ucan_urb_context *ret = NULL;
+
+ if (WARN_ON_ONCE(!up->context_array))
+ return NULL;
+
+ /* execute context operation atomically */
+ spin_lock_irqsave(&up->context_lock, flags);
+
+ for (i = 0; i < up->device_info.tx_fifo; i++) {
+ if (!up->context_array[i].allocated) {
+ /* update context */
+ ret = &up->context_array[i];
+ up->context_array[i].allocated = true;
+
+ /* stop queue if necessary */
+ up->available_tx_urbs--;
+ if (!up->available_tx_urbs)
+ netif_stop_queue(up->netdev);
+
+ break;
+ }
+ }
+
+ spin_unlock_irqrestore(&up->context_lock, flags);
+ return ret;
+}
+
+static bool ucan_release_context(struct ucan_priv *up,
+ struct ucan_urb_context *ctx)
+{
+ unsigned long flags;
+ bool ret = false;
+
+ if (WARN_ON_ONCE(!up->context_array))
+ return false;
+
+ /* execute context operation atomically */
+ spin_lock_irqsave(&up->context_lock, flags);
+
+ /* context was not allocated, maybe the device sent garbage */
+ if (ctx->allocated) {
+ ctx->allocated = false;
+
+ /* check if the queue needs to be woken */
+ if (!up->available_tx_urbs)
+ netif_wake_queue(up->netdev);
+ up->available_tx_urbs++;
+
+ ret = true;
+ }
+
+ spin_unlock_irqrestore(&up->context_lock, flags);
+ return ret;
+}
+
+static int ucan_ctrl_command_out(struct ucan_priv *up,
+ u8 cmd, u16 subcmd, u16 datalen)
+{
+ return usb_control_msg(up->udev,
+ usb_sndctrlpipe(up->udev, 0),
+ cmd,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_INTERFACE,
+ subcmd,
+ up->intf_index,
+ up->ctl_msg_buffer,
+ datalen,
+ UCAN_USB_CTL_PIPE_TIMEOUT);
+}
+
+static int ucan_device_request_in(struct ucan_priv *up,
+ u8 cmd, u16 subcmd, u16 datalen)
+{
+ return usb_control_msg(up->udev,
+ usb_rcvctrlpipe(up->udev, 0),
+ cmd,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ subcmd,
+ 0,
+ up->ctl_msg_buffer,
+ datalen,
+ UCAN_USB_CTL_PIPE_TIMEOUT);
+}
+
+/* Parse the device information structure reported by the device and
+ * setup private variables accordingly
+ */
+static void ucan_parse_device_info(struct ucan_priv *up,
+ struct ucan_ctl_cmd_device_info *device_info)
+{
+ struct can_bittiming_const *bittiming =
+ &up->device_info.bittiming_const;
+ u16 ctrlmodes;
+
+ /* store the data */
+ up->can.clock.freq = le32_to_cpu(device_info->freq);
+ up->device_info.tx_fifo = device_info->tx_fifo;
+ strcpy(bittiming->name, "ucan");
+ bittiming->tseg1_min = device_info->tseg1_min;
+ bittiming->tseg1_max = device_info->tseg1_max;
+ bittiming->tseg2_min = device_info->tseg2_min;
+ bittiming->tseg2_max = device_info->tseg2_max;
+ bittiming->sjw_max = device_info->sjw_max;
+ bittiming->brp_min = le32_to_cpu(device_info->brp_min);
+ bittiming->brp_max = le32_to_cpu(device_info->brp_max);
+ bittiming->brp_inc = le16_to_cpu(device_info->brp_inc);
+
+ ctrlmodes = le16_to_cpu(device_info->ctrlmodes);
+
+ up->can.ctrlmode_supported = 0;
+
+ if (ctrlmodes & UCAN_MODE_LOOPBACK)
+ up->can.ctrlmode_supported |= CAN_CTRLMODE_LOOPBACK;
+ if (ctrlmodes & UCAN_MODE_SILENT)
+ up->can.ctrlmode_supported |= CAN_CTRLMODE_LISTENONLY;
+ if (ctrlmodes & UCAN_MODE_3_SAMPLES)
+ up->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
+ if (ctrlmodes & UCAN_MODE_ONE_SHOT)
+ up->can.ctrlmode_supported |= CAN_CTRLMODE_ONE_SHOT;
+ if (ctrlmodes & UCAN_MODE_BERR_REPORT)
+ up->can.ctrlmode_supported |= CAN_CTRLMODE_BERR_REPORTING;
+}
+
+/* Handle a CAN error frame that we have received from the device.
+ * Returns true if the can state has changed.
+ */
+static bool ucan_handle_error_frame(struct ucan_priv *up,
+ struct ucan_message_in *m,
+ canid_t canid)
+{
+ enum can_state new_state = up->can.state;
+ struct net_device_stats *net_stats = &up->netdev->stats;
+ struct can_device_stats *can_stats = &up->can.can_stats;
+
+ if (canid & CAN_ERR_LOSTARB)
+ can_stats->arbitration_lost++;
+
+ if (canid & CAN_ERR_BUSERROR)
+ can_stats->bus_error++;
+
+ if (canid & CAN_ERR_ACK)
+ net_stats->tx_errors++;
+
+ if (canid & CAN_ERR_BUSOFF)
+ new_state = CAN_STATE_BUS_OFF;
+
+ /* controller problems, details in data[1] */
+ if (canid & CAN_ERR_CRTL) {
+ u8 d1 = m->msg.can_msg.data[1];
+
+ if (d1 & CAN_ERR_CRTL_RX_OVERFLOW)
+ net_stats->rx_over_errors++;
+
+ /* controller state bits: if multiple are set the worst wins */
+ if (d1 & CAN_ERR_CRTL_ACTIVE)
+ new_state = CAN_STATE_ERROR_ACTIVE;
+
+ if (d1 & (CAN_ERR_CRTL_RX_WARNING | CAN_ERR_CRTL_TX_WARNING))
+ new_state = CAN_STATE_ERROR_WARNING;
+
+ if (d1 & (CAN_ERR_CRTL_RX_PASSIVE | CAN_ERR_CRTL_TX_PASSIVE))
+ new_state = CAN_STATE_ERROR_PASSIVE;
+ }
+
+ /* protocol error, details in data[2] */
+ if (canid & CAN_ERR_PROT) {
+ u8 d2 = m->msg.can_msg.data[2];
+
+ if (d2 & CAN_ERR_PROT_TX)
+ net_stats->tx_errors++;
+ else
+ net_stats->rx_errors++;
+ }
+
+ /* no state change - we are done */
+ if (up->can.state == new_state)
+ return false;
+
+ /* we switched into a better state */
+ if (up->can.state > new_state) {
+ up->can.state = new_state;
+ return true;
+ }
+
+ /* we switched into a worse state */
+ up->can.state = new_state;
+ switch (new_state) {
+ case CAN_STATE_BUS_OFF:
+ can_stats->bus_off++;
+ can_bus_off(up->netdev);
+ break;
+ case CAN_STATE_ERROR_PASSIVE:
+ can_stats->error_passive++;
+ break;
+ case CAN_STATE_ERROR_WARNING:
+ can_stats->error_warning++;
+ break;
+ default:
+ break;
+ }
+ return true;
+}
+
+/* Callback on reception of a can frame via the IN endpoint
+ *
+ * This function allocates an skb and transferres it to the Linux
+ * network stack
+ */
+static void ucan_rx_can_msg(struct ucan_priv *up, struct ucan_message_in *m)
+{
+ int len;
+ canid_t canid;
+ struct can_frame *cf;
+ struct sk_buff *skb;
+ struct net_device_stats *stats = &up->netdev->stats;
+
+ /* get the contents of the length field */
+ len = le16_to_cpu(m->len);
+
+ /* check sanity */
+ if (len < UCAN_IN_HDR_SIZE + sizeof(m->msg.can_msg.id)) {
+ netdev_warn(up->netdev, "invalid input message len: %d\n", len);
+ return;
+ }
+
+ /* handle error frames */
+ canid = le32_to_cpu(m->msg.can_msg.id);
+ if (canid & CAN_ERR_FLAG) {
+ bool busstate_changed = ucan_handle_error_frame(up, m, canid);
+
+ /* if berr-reporting is off only state changes get through */
+ if (!(up->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) &&
+ !busstate_changed)
+ return;
+ } else {
+ canid_t canid_mask;
+ /* compute the mask for canid */
+ canid_mask = CAN_RTR_FLAG;
+ if (canid & CAN_EFF_FLAG)
+ canid_mask |= CAN_EFF_MASK | CAN_EFF_FLAG;
+ else
+ canid_mask |= CAN_SFF_MASK;
+
+ if (canid & ~canid_mask)
+ netdev_warn(up->netdev,
+ "unexpected bits set (canid %x, mask %x)",
+ canid, canid_mask);
+
+ canid &= canid_mask;
+ }
+
+ /* allocate skb */
+ skb = alloc_can_skb(up->netdev, &cf);
+ if (!skb)
+ return;
+
+ /* fill the can frame */
+ cf->can_id = canid;
+
+ /* compute DLC taking RTR_FLAG into account */
+ cf->can_dlc = ucan_get_can_dlc(&m->msg.can_msg, len);
+
+ /* copy the payload of non RTR frames */
+ if (!(cf->can_id & CAN_RTR_FLAG) || (cf->can_id & CAN_ERR_FLAG))
+ memcpy(cf->data, m->msg.can_msg.data, cf->can_dlc);
+
+ /* don't count error frames as real packets */
+ stats->rx_packets++;
+ stats->rx_bytes += cf->can_dlc;
+
+ /* pass it to Linux */
+ netif_rx(skb);
+}
+
+/* callback indicating completed transmission */
+static void ucan_tx_complete_msg(struct ucan_priv *up,
+ struct ucan_message_in *m)
+{
+ unsigned long flags;
+ u16 count, i;
+ u8 echo_index, dlc;
+ u16 len = le16_to_cpu(m->len);
+
+ struct ucan_urb_context *context;
+
+ if (len < UCAN_IN_HDR_SIZE || (len % 2 != 0)) {
+ netdev_err(up->netdev, "invalid tx complete length\n");
+ return;
+ }
+
+ count = (len - UCAN_IN_HDR_SIZE) / 2;
+ for (i = 0; i < count; i++) {
+ /* we did not submit such echo ids */
+ echo_index = m->msg.can_tx_complete_msg[i].echo_index;
+ if (echo_index >= up->device_info.tx_fifo) {
+ up->netdev->stats.tx_errors++;
+ netdev_err(up->netdev,
+ "invalid echo_index %d received\n",
+ echo_index);
+ continue;
+ }
+
+ /* gather information from the context */
+ context = &up->context_array[echo_index];
+ dlc = READ_ONCE(context->dlc);
+
+ /* Release context and restart queue if necessary.
+ * Also check if the context was allocated
+ */
+ if (!ucan_release_context(up, context))
+ continue;
+
+ spin_lock_irqsave(&up->echo_skb_lock, flags);
+ if (m->msg.can_tx_complete_msg[i].flags &
+ UCAN_TX_COMPLETE_SUCCESS) {
+ /* update statistics */
+ up->netdev->stats.tx_packets++;
+ up->netdev->stats.tx_bytes += dlc;
+ can_get_echo_skb(up->netdev, echo_index);
+ } else {
+ up->netdev->stats.tx_dropped++;
+ can_free_echo_skb(up->netdev, echo_index);
+ }
+ spin_unlock_irqrestore(&up->echo_skb_lock, flags);
+ }
+}
+
+/* callback on reception of a USB message */
+static void ucan_read_bulk_callback(struct urb *urb)
+{
+ int ret;
+ int pos;
+ struct ucan_priv *up = urb->context;
+ struct net_device *netdev = up->netdev;
+ struct ucan_message_in *m;
+
+ /* the device is not up and the driver should not receive any
+ * data on the bulk in pipe
+ */
+ if (WARN_ON(!up->context_array)) {
+ usb_free_coherent(up->udev,
+ up->in_ep_size,
+ urb->transfer_buffer,
+ urb->transfer_dma);
+ return;
+ }
+
+ /* check URB status */
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ENOENT:
+ case -EPIPE:
+ case -EPROTO:
+ case -ESHUTDOWN:
+ case -ETIME:
+ /* urb is not resubmitted -> free dma data */
+ usb_free_coherent(up->udev,
+ up->in_ep_size,
+ urb->transfer_buffer,
+ urb->transfer_dma);
+ netdev_dbg(up->netdev, "not resumbmitting urb; status: %d\n",
+ urb->status);
+ return;
+ default:
+ goto resubmit;
+ }
+
+ /* sanity check */
+ if (!netif_device_present(netdev))
+ return;
+
+ /* iterate over input */
+ pos = 0;
+ while (pos < urb->actual_length) {
+ int len;
+
+ /* check sanity (length of header) */
+ if ((urb->actual_length - pos) < UCAN_IN_HDR_SIZE) {
+ netdev_warn(up->netdev,
+ "invalid message (short; no hdr; l:%d)\n",
+ urb->actual_length);
+ goto resubmit;
+ }
+
+ /* setup the message address */
+ m = (struct ucan_message_in *)
+ ((u8 *)urb->transfer_buffer + pos);
+ len = le16_to_cpu(m->len);
+
+ /* check sanity (length of content) */
+ if (urb->actual_length - pos < len) {
+ netdev_warn(up->netdev,
+ "invalid message (short; no data; l:%d)\n",
+ urb->actual_length);
+ print_hex_dump(KERN_WARNING,
+ "raw data: ",
+ DUMP_PREFIX_ADDRESS,
+ 16,
+ 1,
+ urb->transfer_buffer,
+ urb->actual_length,
+ true);
+
+ goto resubmit;
+ }
+
+ switch (m->type) {
+ case UCAN_IN_RX:
+ ucan_rx_can_msg(up, m);
+ break;
+ case UCAN_IN_TX_COMPLETE:
+ ucan_tx_complete_msg(up, m);
+ break;
+ default:
+ netdev_warn(up->netdev,
+ "invalid message (type; t:%d)\n",
+ m->type);
+ break;
+ }
+
+ /* proceed to next message */
+ pos += len;
+ /* align to 4 byte boundary */
+ pos = round_up(pos, 4);
+ }
+
+resubmit:
+ /* resubmit urb when done */
+ usb_fill_bulk_urb(urb, up->udev,
+ usb_rcvbulkpipe(up->udev,
+ up->in_ep_addr),
+ urb->transfer_buffer,
+ up->in_ep_size,
+ ucan_read_bulk_callback,
+ up);
+
+ usb_anchor_urb(urb, &up->rx_urbs);
+ ret = usb_submit_urb(urb, GFP_KERNEL);
+
+ if (ret < 0) {
+ netdev_err(up->netdev,
+ "failed resubmitting read bulk urb: %d\n",
+ ret);
+
+ usb_unanchor_urb(urb);
+ usb_free_coherent(up->udev,
+ up->in_ep_size,
+ urb->transfer_buffer,
+ urb->transfer_dma);
+
+ if (ret == -ENODEV)
+ netif_device_detach(netdev);
+ }
+}
+
+/* callback after transmission of a USB message */
+static void ucan_write_bulk_callback(struct urb *urb)
+{
+ unsigned long flags;
+ struct ucan_priv *up;
+ struct ucan_urb_context *context = urb->context;
+
+ /* get the urb context */
+ if (WARN_ON_ONCE(!context))
+ return;
+
+ /* free up our allocated buffer */
+ usb_free_coherent(urb->dev,
+ sizeof(struct ucan_message_out),
+ urb->transfer_buffer,
+ urb->transfer_dma);
+
+ up = context->up;
+ if (WARN_ON_ONCE(!up))
+ return;
+
+ /* sanity check */
+ if (!netif_device_present(up->netdev))
+ return;
+
+ /* transmission failed (USB - the device will not send a TX complete) */
+ if (urb->status) {
+ netdev_warn(up->netdev,
+ "failed to transmit USB message to device: %d\n",
+ urb->status);
+
+ /* update counters an cleanup */
+ spin_lock_irqsave(&up->echo_skb_lock, flags);
+ can_free_echo_skb(up->netdev, context - up->context_array);
+ spin_unlock_irqrestore(&up->echo_skb_lock, flags);
+
+ up->netdev->stats.tx_dropped++;
+
+ /* release context and restart the queue if necessary */
+ if (!ucan_release_context(up, context))
+ netdev_err(up->netdev,
+ "urb failed, failed to release context\n");
+ }
+}
+
+static void ucan_cleanup_rx_urbs(struct ucan_priv *up, struct urb **urbs)
+{
+ int i;
+
+ for (i = 0; i < UCAN_MAX_RX_URBS; i++) {
+ if (urbs[i]) {
+ usb_unanchor_urb(urbs[i]);
+ usb_free_coherent(up->udev,
+ up->in_ep_size,
+ urbs[i]->transfer_buffer,
+ urbs[i]->transfer_dma);
+ usb_free_urb(urbs[i]);
+ }
+ }
+
+ memset(urbs, 0, sizeof(*urbs) * UCAN_MAX_RX_URBS);
+}
+
+static int ucan_prepare_and_anchor_rx_urbs(struct ucan_priv *up,
+ struct urb **urbs)
+{
+ int i;
+
+ memset(urbs, 0, sizeof(*urbs) * UCAN_MAX_RX_URBS);
+
+ for (i = 0; i < UCAN_MAX_RX_URBS; i++) {
+ void *buf;
+
+ urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urbs[i])
+ goto err;
+
+ buf = usb_alloc_coherent(up->udev,
+ up->in_ep_size,
+ GFP_KERNEL, &urbs[i]->transfer_dma);
+ if (!buf) {
+ /* cleanup this urb */
+ usb_free_urb(urbs[i]);
+ urbs[i] = NULL;
+ goto err;
+ }
+
+ usb_fill_bulk_urb(urbs[i], up->udev,
+ usb_rcvbulkpipe(up->udev,
+ up->in_ep_addr),
+ buf,
+ up->in_ep_size,
+ ucan_read_bulk_callback,
+ up);
+
+ urbs[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ usb_anchor_urb(urbs[i], &up->rx_urbs);
+ }
+ return 0;
+
+err:
+ /* cleanup other unsubmitted urbs */
+ ucan_cleanup_rx_urbs(up, urbs);
+ return -ENOMEM;
+}
+
+/* Submits rx urbs with the semantic: Either submit all, or cleanup
+ * everything. I case of errors submitted urbs are killed and all urbs in
+ * the array are freed. I case of no errors every entry in the urb
+ * array is set to NULL.
+ */
+static int ucan_submit_rx_urbs(struct ucan_priv *up, struct urb **urbs)
+{
+ int i, ret;
+
+ /* Iterate over all urbs to submit. On success remove the urb
+ * from the list.
+ */
+ for (i = 0; i < UCAN_MAX_RX_URBS; i++) {
+ ret = usb_submit_urb(urbs[i], GFP_KERNEL);
+ if (ret) {
+ netdev_err(up->netdev,
+ "could not submit urb; code: %d\n",
+ ret);
+ goto err;
+ }
+
+ /* Anchor URB and drop reference, USB core will take
+ * care of freeing it
+ */
+ usb_free_urb(urbs[i]);
+ urbs[i] = NULL;
+ }
+ return 0;
+
+err:
+ /* Cleanup unsubmitted urbs */
+ ucan_cleanup_rx_urbs(up, urbs);
+
+ /* Kill urbs that are already submitted */
+ usb_kill_anchored_urbs(&up->rx_urbs);
+
+ return ret;
+}
+
+/* Open the network device */
+static int ucan_open(struct net_device *netdev)
+{
+ int ret, ret_cleanup;
+ u16 ctrlmode;
+ struct urb *urbs[UCAN_MAX_RX_URBS];
+ struct ucan_priv *up = netdev_priv(netdev);
+
+ ret = ucan_alloc_context_array(up);
+ if (ret)
+ return ret;
+
+ /* Allocate and prepare IN URBS - allocated and anchored
+ * urbs are stored in urbs[] for clean
+ */
+ ret = ucan_prepare_and_anchor_rx_urbs(up, urbs);
+ if (ret)
+ goto err_contexts;
+
+ /* Check the control mode */
+ ctrlmode = 0;
+ if (up->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
+ ctrlmode |= UCAN_MODE_LOOPBACK;
+ if (up->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
+ ctrlmode |= UCAN_MODE_SILENT;
+ if (up->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+ ctrlmode |= UCAN_MODE_3_SAMPLES;
+ if (up->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT)
+ ctrlmode |= UCAN_MODE_ONE_SHOT;
+
+ /* Enable this in any case - filtering is down within the
+ * receive path
+ */
+ ctrlmode |= UCAN_MODE_BERR_REPORT;
+ up->ctl_msg_buffer->cmd_start.mode = cpu_to_le16(ctrlmode);
+
+ /* Driver is ready to receive data - start the USB device */
+ ret = ucan_ctrl_command_out(up, UCAN_COMMAND_START, 0, 2);
+ if (ret < 0) {
+ netdev_err(up->netdev,
+ "could not start device, code: %d\n",
+ ret);
+ goto err_reset;
+ }
+
+ /* Call CAN layer open */
+ ret = open_candev(netdev);
+ if (ret)
+ goto err_stop;
+
+ /* Driver is ready to receive data. Submit RX URBS */
+ ret = ucan_submit_rx_urbs(up, urbs);
+ if (ret)
+ goto err_stop;
+
+ up->can.state = CAN_STATE_ERROR_ACTIVE;
+
+ /* Start the network queue */
+ netif_start_queue(netdev);
+
+ return 0;
+
+err_stop:
+ /* The device have started already stop it */
+ ret_cleanup = ucan_ctrl_command_out(up, UCAN_COMMAND_STOP, 0, 0);
+ if (ret_cleanup < 0)
+ netdev_err(up->netdev,
+ "could not stop device, code: %d\n",
+ ret_cleanup);
+
+err_reset:
+ /* The device might have received data, reset it for
+ * consistent state
+ */
+ ret_cleanup = ucan_ctrl_command_out(up, UCAN_COMMAND_RESET, 0, 0);
+ if (ret_cleanup < 0)
+ netdev_err(up->netdev,
+ "could not reset device, code: %d\n",
+ ret_cleanup);
+
+ /* clean up unsubmitted urbs */
+ ucan_cleanup_rx_urbs(up, urbs);
+
+err_contexts:
+ ucan_release_context_array(up);
+ return ret;
+}
+
+static struct urb *ucan_prepare_tx_urb(struct ucan_priv *up,
+ struct ucan_urb_context *context,
+ struct can_frame *cf,
+ u8 echo_index)
+{
+ int mlen;
+ struct urb *urb;
+ struct ucan_message_out *m;
+
+ /* create a URB, and a buffer for it, and copy the data to the URB */
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ netdev_err(up->netdev, "no memory left for URBs\n");
+ return NULL;
+ }
+
+ m = usb_alloc_coherent(up->udev,
+ sizeof(struct ucan_message_out),
+ GFP_ATOMIC,
+ &urb->transfer_dma);
+ if (!m) {
+ netdev_err(up->netdev, "no memory left for USB buffer\n");
+ usb_free_urb(urb);
+ return NULL;
+ }
+
+ /* build the USB message */
+ m->type = UCAN_OUT_TX;
+ m->msg.can_msg.id = cpu_to_le32(cf->can_id);
+
+ if (cf->can_id & CAN_RTR_FLAG) {
+ mlen = UCAN_OUT_HDR_SIZE +
+ offsetof(struct ucan_can_msg, dlc) +
+ sizeof(m->msg.can_msg.dlc);
+ m->msg.can_msg.dlc = cf->can_dlc;
+ } else {
+ mlen = UCAN_OUT_HDR_SIZE +
+ sizeof(m->msg.can_msg.id) + cf->can_dlc;
+ memcpy(m->msg.can_msg.data, cf->data, cf->can_dlc);
+ }
+ m->len = cpu_to_le16(mlen);
+
+ context->dlc = cf->can_dlc;
+
+ m->subtype = echo_index;
+
+ /* build the urb */
+ usb_fill_bulk_urb(urb, up->udev,
+ usb_sndbulkpipe(up->udev,
+ up->out_ep_addr),
+ m, mlen, ucan_write_bulk_callback, context);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ return urb;
+}
+
+static void ucan_clean_up_tx_urb(struct ucan_priv *up, struct urb *urb)
+{
+ usb_free_coherent(up->udev, sizeof(struct ucan_message_out),
+ urb->transfer_buffer, urb->transfer_dma);
+ usb_free_urb(urb);
+}
+
+/* callback when Linux needs to send a can frame */
+static netdev_tx_t ucan_start_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ unsigned long flags;
+ int ret;
+ u8 echo_index;
+ struct urb *urb;
+ struct ucan_urb_context *context;
+ struct ucan_priv *up = netdev_priv(netdev);
+ struct can_frame *cf = (struct can_frame *)skb->data;
+
+ /* check skb */
+ if (can_dropped_invalid_skb(netdev, skb))
+ return NETDEV_TX_OK;
+
+ /* allocate a context and slow down tx path, if fifo state is low */
+ context = ucan_alloc_context(up);
+ echo_index = context - up->context_array;
+
+ if (WARN_ON_ONCE(!context))
+ return NETDEV_TX_BUSY;
+
+ /* prepare urb for transmission */
+ urb = ucan_prepare_tx_urb(up, context, cf, echo_index);
+ if (!urb)
+ goto drop;
+
+ /* put the skb on can loopback stack */
+ spin_lock_irqsave(&up->echo_skb_lock, flags);
+ can_put_echo_skb(skb, up->netdev, echo_index);
+ spin_unlock_irqrestore(&up->echo_skb_lock, flags);
+
+ /* transmit it */
+ usb_anchor_urb(urb, &up->tx_urbs);
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+
+ /* cleanup urb */
+ if (ret) {
+ /* on error, clean up */
+ usb_unanchor_urb(urb);
+ ucan_clean_up_tx_urb(up, urb);
+ if (!ucan_release_context(up, context))
+ netdev_err(up->netdev,
+ "xmit err: failed to release context\n");
+
+ /* remove the skb from the echo stack - this also
+ * frees the skb
+ */
+ spin_lock_irqsave(&up->echo_skb_lock, flags);
+ can_free_echo_skb(up->netdev, echo_index);
+ spin_unlock_irqrestore(&up->echo_skb_lock, flags);
+
+ if (ret == -ENODEV) {
+ netif_device_detach(up->netdev);
+ } else {
+ netdev_warn(up->netdev,
+ "xmit err: failed to submit urb %d\n",
+ ret);
+ up->netdev->stats.tx_dropped++;
+ }
+ return NETDEV_TX_OK;
+ }
+
+ netif_trans_update(netdev);
+
+ /* release ref, as we do not need the urb anymore */
+ usb_free_urb(urb);
+
+ return NETDEV_TX_OK;
+
+drop:
+ if (!ucan_release_context(up, context))
+ netdev_err(up->netdev,
+ "xmit drop: failed to release context\n");
+ dev_kfree_skb(skb);
+ up->netdev->stats.tx_dropped++;
+
+ return NETDEV_TX_OK;
+}
+
+/* Device goes down
+ *
+ * Clean up used resources
+ */
+static int ucan_close(struct net_device *netdev)
+{
+ int ret;
+ struct ucan_priv *up = netdev_priv(netdev);
+
+ up->can.state = CAN_STATE_STOPPED;
+
+ /* stop sending data */
+ usb_kill_anchored_urbs(&up->tx_urbs);
+
+ /* stop receiving data */
+ usb_kill_anchored_urbs(&up->rx_urbs);
+
+ /* stop and reset can device */
+ ret = ucan_ctrl_command_out(up, UCAN_COMMAND_STOP, 0, 0);
+ if (ret < 0)
+ netdev_err(up->netdev,
+ "could not stop device, code: %d\n",
+ ret);
+
+ ret = ucan_ctrl_command_out(up, UCAN_COMMAND_RESET, 0, 0);
+ if (ret < 0)
+ netdev_err(up->netdev,
+ "could not reset device, code: %d\n",
+ ret);
+
+ netif_stop_queue(netdev);
+
+ ucan_release_context_array(up);
+
+ close_candev(up->netdev);
+ return 0;
+}
+
+/* CAN driver callbacks */
+static const struct net_device_ops ucan_netdev_ops = {
+ .ndo_open = ucan_open,
+ .ndo_stop = ucan_close,
+ .ndo_start_xmit = ucan_start_xmit,
+ .ndo_change_mtu = can_change_mtu,
+};
+
+/* Request to set bittiming
+ *
+ * This function generates an USB set bittiming message and transmits
+ * it to the device
+ */
+static int ucan_set_bittiming(struct net_device *netdev)
+{
+ int ret;
+ struct ucan_priv *up = netdev_priv(netdev);
+ struct ucan_ctl_cmd_set_bittiming *cmd_set_bittiming;
+
+ cmd_set_bittiming = &up->ctl_msg_buffer->cmd_set_bittiming;
+ cmd_set_bittiming->tq = cpu_to_le32(up->can.bittiming.tq);
+ cmd_set_bittiming->brp = cpu_to_le16(up->can.bittiming.brp);
+ cmd_set_bittiming->sample_point =
+ cpu_to_le16(up->can.bittiming.sample_point);
+ cmd_set_bittiming->prop_seg = up->can.bittiming.prop_seg;
+ cmd_set_bittiming->phase_seg1 = up->can.bittiming.phase_seg1;
+ cmd_set_bittiming->phase_seg2 = up->can.bittiming.phase_seg2;
+ cmd_set_bittiming->sjw = up->can.bittiming.sjw;
+
+ ret = ucan_ctrl_command_out(up, UCAN_COMMAND_SET_BITTIMING, 0,
+ sizeof(*cmd_set_bittiming));
+ return (ret < 0) ? ret : 0;
+}
+
+/* Restart the device to get it out of BUS-OFF state.
+ * Called when the user runs "ip link set can1 type can restart".
+ */
+static int ucan_set_mode(struct net_device *netdev, enum can_mode mode)
+{
+ int ret;
+ unsigned long flags;
+ struct ucan_priv *up = netdev_priv(netdev);
+
+ switch (mode) {
+ case CAN_MODE_START:
+ netdev_dbg(up->netdev, "restarting device\n");
+
+ ret = ucan_ctrl_command_out(up, UCAN_COMMAND_RESTART, 0, 0);
+ up->can.state = CAN_STATE_ERROR_ACTIVE;
+
+ /* check if queue can be restarted,
+ * up->available_tx_urbs must be protected by the
+ * lock
+ */
+ spin_lock_irqsave(&up->context_lock, flags);
+
+ if (up->available_tx_urbs > 0)
+ netif_wake_queue(up->netdev);
+
+ spin_unlock_irqrestore(&up->context_lock, flags);
+
+ return ret;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/* Probe the device, reset it and gather general device information */
+static int ucan_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ int ret;
+ int i;
+ u32 protocol_version;
+ struct usb_device *udev;
+ struct net_device *netdev;
+ struct usb_host_interface *iface_desc;
+ struct ucan_priv *up;
+ struct usb_endpoint_descriptor *ep;
+ u16 in_ep_size;
+ u16 out_ep_size;
+ u8 in_ep_addr;
+ u8 out_ep_addr;
+ union ucan_ctl_payload *ctl_msg_buffer;
+ char firmware_str[sizeof(union ucan_ctl_payload) + 1];
+
+ udev = interface_to_usbdev(intf);
+
+ /* Stage 1 - Interface Parsing
+ * ---------------------------
+ *
+ * Identifie the device USB interface descriptor and its
+ * endpoints. Probing is aborted on errors.
+ */
+
+ /* check if the interface is sane */
+ iface_desc = intf->cur_altsetting;
+ if (!iface_desc)
+ return -ENODEV;
+
+ dev_info(&udev->dev,
+ "%s: probing device on interface #%d\n",
+ UCAN_DRIVER_NAME,
+ iface_desc->desc.bInterfaceNumber);
+
+ /* interface sanity check */
+ if (iface_desc->desc.bNumEndpoints != 2) {
+ dev_err(&udev->dev,
+ "%s: invalid EP count (%d)",
+ UCAN_DRIVER_NAME, iface_desc->desc.bNumEndpoints);
+ goto err_firmware_needs_update;
+ }
+
+ /* check interface endpoints */
+ in_ep_addr = 0;
+ out_ep_addr = 0;
+ in_ep_size = 0;
+ out_ep_size = 0;
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
+ ep = &iface_desc->endpoint[i].desc;
+
+ if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) != 0) &&
+ ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_BULK)) {
+ /* In Endpoint */
+ in_ep_addr = ep->bEndpointAddress;
+ in_ep_addr &= USB_ENDPOINT_NUMBER_MASK;
+ in_ep_size = le16_to_cpu(ep->wMaxPacketSize);
+ } else if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ==
+ 0) &&
+ ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_BULK)) {
+ /* Out Endpoint */
+ out_ep_addr = ep->bEndpointAddress;
+ out_ep_addr &= USB_ENDPOINT_NUMBER_MASK;
+ out_ep_size = le16_to_cpu(ep->wMaxPacketSize);
+ }
+ }
+
+ /* check if interface is sane */
+ if (!in_ep_addr || !out_ep_addr) {
+ dev_err(&udev->dev, "%s: invalid endpoint configuration\n",
+ UCAN_DRIVER_NAME);
+ goto err_firmware_needs_update;
+ }
+ if (in_ep_size < sizeof(struct ucan_message_in)) {
+ dev_err(&udev->dev, "%s: invalid in_ep MaxPacketSize\n",
+ UCAN_DRIVER_NAME);
+ goto err_firmware_needs_update;
+ }
+ if (out_ep_size < sizeof(struct ucan_message_out)) {
+ dev_err(&udev->dev, "%s: invalid out_ep MaxPacketSize\n",
+ UCAN_DRIVER_NAME);
+ goto err_firmware_needs_update;
+ }
+
+ /* Stage 2 - Device Identification
+ * -------------------------------
+ *
+ * The device interface seems to be a ucan device. Do further
+ * compatibility checks. On error probing is aborted, on
+ * success this stage leaves the ctl_msg_buffer with the
+ * reported contents of a GET_INFO command (supported
+ * bittimings, tx_fifo depth). This information is used in
+ * Stage 3 for the final driver initialisation.
+ */
+
+ /* Prepare Memory for control transferes */
+ ctl_msg_buffer = devm_kzalloc(&udev->dev,
+ sizeof(union ucan_ctl_payload),
+ GFP_KERNEL);
+ if (!ctl_msg_buffer) {
+ dev_err(&udev->dev,
+ "%s: failed to allocate control pipe memory\n",
+ UCAN_DRIVER_NAME);
+ return -ENOMEM;
+ }
+
+ /* get protocol version
+ *
+ * note: ucan_ctrl_command_* wrappers cannot be used yet
+ * because `up` is initialised in Stage 3
+ */
+ ret = usb_control_msg(udev,
+ usb_rcvctrlpipe(udev, 0),
+ UCAN_COMMAND_GET,
+ USB_DIR_IN | USB_TYPE_VENDOR |
+ USB_RECIP_INTERFACE,
+ UCAN_COMMAND_GET_PROTOCOL_VERSION,
+ iface_desc->desc.bInterfaceNumber,
+ ctl_msg_buffer,
+ sizeof(union ucan_ctl_payload),
+ UCAN_USB_CTL_PIPE_TIMEOUT);
+
+ /* older firmware version do not support this command - those
+ * are not supported by this drive
+ */
+ if (ret != 4) {
+ dev_err(&udev->dev,
+ "%s: could not read protocol version, ret=%d\n",
+ UCAN_DRIVER_NAME, ret);
+ if (ret >= 0)
+ ret = -EINVAL;
+ goto err_firmware_needs_update;
+ }
+
+ /* this driver currently supports protocol version 3 only */
+ protocol_version =
+ le32_to_cpu(ctl_msg_buffer->cmd_get_protocol_version.version);
+ if (protocol_version < UCAN_PROTOCOL_VERSION_MIN ||
+ protocol_version > UCAN_PROTOCOL_VERSION_MAX) {
+ dev_err(&udev->dev,
+ "%s: device protocol version %d is not supported\n",
+ UCAN_DRIVER_NAME, protocol_version);
+ goto err_firmware_needs_update;
+ }
+
+ /* request the device information and store it in ctl_msg_buffer
+ *
+ * note: ucan_ctrl_command_* wrappers connot be used yet
+ * because `up` is initialised in Stage 3
+ */
+ ret = usb_control_msg(udev,
+ usb_rcvctrlpipe(udev, 0),
+ UCAN_COMMAND_GET,
+ USB_DIR_IN | USB_TYPE_VENDOR |
+ USB_RECIP_INTERFACE,
+ UCAN_COMMAND_GET_INFO,
+ iface_desc->desc.bInterfaceNumber,
+ ctl_msg_buffer,
+ sizeof(ctl_msg_buffer->cmd_get_device_info),
+ UCAN_USB_CTL_PIPE_TIMEOUT);
+
+ if (ret < 0) {
+ dev_err(&udev->dev, "%s: failed to retrieve device info\n",
+ UCAN_DRIVER_NAME);
+ goto err_firmware_needs_update;
+ }
+ if (ret < sizeof(ctl_msg_buffer->cmd_get_device_info)) {
+ dev_err(&udev->dev, "%s: device reported invalid device info\n",
+ UCAN_DRIVER_NAME);
+ goto err_firmware_needs_update;
+ }
+ if (ctl_msg_buffer->cmd_get_device_info.tx_fifo == 0) {
+ dev_err(&udev->dev,
+ "%s: device reported invalid tx-fifo size\n",
+ UCAN_DRIVER_NAME);
+ goto err_firmware_needs_update;
+ }
+
+ /* Stage 3 - Driver Initialisation
+ * -------------------------------
+ *
+ * Register device to Linux, prepare private structures and
+ * reset the device.
+ */
+
+ /* allocate driver resources */
+ netdev = alloc_candev(sizeof(struct ucan_priv),
+ ctl_msg_buffer->cmd_get_device_info.tx_fifo);
+ if (!netdev) {
+ dev_err(&udev->dev,
+ "%s: cannot allocate candev\n", UCAN_DRIVER_NAME);
+ return -ENOMEM;
+ }
+
+ up = netdev_priv(netdev);
+
+ /* initialze data */
+ up->udev = udev;
+ up->intf = intf;
+ up->netdev = netdev;
+ up->intf_index = iface_desc->desc.bInterfaceNumber;
+ up->in_ep_addr = in_ep_addr;
+ up->out_ep_addr = out_ep_addr;
+ up->in_ep_size = in_ep_size;
+ up->ctl_msg_buffer = ctl_msg_buffer;
+ up->context_array = NULL;
+ up->available_tx_urbs = 0;
+
+ up->can.state = CAN_STATE_STOPPED;
+ up->can.bittiming_const = &up->device_info.bittiming_const;
+ up->can.do_set_bittiming = ucan_set_bittiming;
+ up->can.do_set_mode = &ucan_set_mode;
+ spin_lock_init(&up->context_lock);
+ spin_lock_init(&up->echo_skb_lock);
+ netdev->netdev_ops = &ucan_netdev_ops;
+
+ usb_set_intfdata(intf, up);
+ SET_NETDEV_DEV(netdev, &intf->dev);
+
+ /* parse device information
+ * the data retrieved in Stage 2 is still available in
+ * up->ctl_msg_buffer
+ */
+ ucan_parse_device_info(up, &ctl_msg_buffer->cmd_get_device_info);
+
+ /* just print some device information - if available */
+ ret = ucan_device_request_in(up, UCAN_DEVICE_GET_FW_STRING, 0,
+ sizeof(union ucan_ctl_payload));
+ if (ret > 0) {
+ /* copy string while ensuring zero terminiation */
+ strncpy(firmware_str, up->ctl_msg_buffer->raw,
+ sizeof(union ucan_ctl_payload));
+ firmware_str[sizeof(union ucan_ctl_payload)] = '\0';
+ } else {
+ strcpy(firmware_str, "unknown");
+ }
+
+ /* device is compatible, reset it */
+ ret = ucan_ctrl_command_out(up, UCAN_COMMAND_RESET, 0, 0);
+ if (ret < 0)
+ goto err_free_candev;
+
+ init_usb_anchor(&up->rx_urbs);
+ init_usb_anchor(&up->tx_urbs);
+
+ up->can.state = CAN_STATE_STOPPED;
+
+ /* register the device */
+ ret = register_candev(netdev);
+ if (ret)
+ goto err_free_candev;
+
+ /* initialisation complete, log device info */
+ netdev_info(up->netdev, "registered device\n");
+ netdev_info(up->netdev, "firmware string: %s\n", firmware_str);
+
+ /* success */
+ return 0;
+
+err_free_candev:
+ free_candev(netdev);
+ return ret;
+
+err_firmware_needs_update:
+ dev_err(&udev->dev,
+ "%s: probe failed; try to update the device firmware\n",
+ UCAN_DRIVER_NAME);
+ return -ENODEV;
+}
+
+/* disconnect the device */
+static void ucan_disconnect(struct usb_interface *intf)
+{
+ struct usb_device *udev;
+ struct ucan_priv *up = usb_get_intfdata(intf);
+
+ udev = interface_to_usbdev(intf);
+
+ usb_set_intfdata(intf, NULL);
+
+ if (up) {
+ unregister_netdev(up->netdev);
+ free_candev(up->netdev);
+ }
+}
+
+static struct usb_device_id ucan_table[] = {
+ /* Mule (soldered onto compute modules) */
+ {USB_DEVICE_INTERFACE_NUMBER(0x2294, 0x425a, 0)},
+ /* Seal (standalone USB stick) */
+ {USB_DEVICE_INTERFACE_NUMBER(0x2294, 0x425b, 0)},
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ucan_table);
+/* driver callbacks */
+static struct usb_driver ucan_driver = {
+ .name = UCAN_DRIVER_NAME,
+ .probe = ucan_probe,
+ .disconnect = ucan_disconnect,
+ .id_table = ucan_table,
+};
+
+module_usb_driver(ucan_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Martin Elshuber <martin.elshuber@theobroma-systems.com>");
+MODULE_AUTHOR("Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>");
+MODULE_DESCRIPTION("Driver for Theobroma Systems UCAN devices");