diff options
Diffstat (limited to 'drivers/net/dsa/mt7530.c')
| -rw-r--r-- | drivers/net/dsa/mt7530.c | 911 |
1 files changed, 887 insertions, 24 deletions
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 82a1d13d38f9..61388945d316 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -234,6 +234,12 @@ mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val) } static u32 +_mt7530_unlocked_read(struct mt7530_dummy_poll *p) +{ + return mt7530_mii_read(p->priv, p->reg); +} + +static u32 _mt7530_read(struct mt7530_dummy_poll *p) { struct mii_bus *bus = p->priv->bus; @@ -483,6 +489,108 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) return 0; } +static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv) +{ + u32 val; + + val = mt7530_read(priv, MT7531_TOP_SIG_SR); + + return (val & PAD_DUAL_SGMII_EN) != 0; +} + +static int +mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) +{ + struct mt7530_priv *priv = ds->priv; + u32 top_sig; + u32 hwstrap; + u32 xtal; + u32 val; + + if (mt7531_dual_sgmii_supported(priv)) + return 0; + + val = mt7530_read(priv, MT7531_CREV); + top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR); + hwstrap = mt7530_read(priv, MT7531_HWTRAP); + if ((val & CHIP_REV_M) > 0) + xtal = (top_sig & PAD_MCM_SMI_EN) ? HWTRAP_XTAL_FSEL_40MHZ : + HWTRAP_XTAL_FSEL_25MHZ; + else + xtal = hwstrap & HWTRAP_XTAL_FSEL_MASK; + + /* Step 1 : Disable MT7531 COREPLL */ + val = mt7530_read(priv, MT7531_PLLGP_EN); + val &= ~EN_COREPLL; + mt7530_write(priv, MT7531_PLLGP_EN, val); + + /* Step 2: switch to XTAL output */ + val = mt7530_read(priv, MT7531_PLLGP_EN); + val |= SW_CLKSW; + mt7530_write(priv, MT7531_PLLGP_EN, val); + + val = mt7530_read(priv, MT7531_PLLGP_CR0); + val &= ~RG_COREPLL_EN; + mt7530_write(priv, MT7531_PLLGP_CR0, val); + + /* Step 3: disable PLLGP and enable program PLLGP */ + val = mt7530_read(priv, MT7531_PLLGP_EN); + val |= SW_PLLGP; + mt7530_write(priv, MT7531_PLLGP_EN, val); + + /* Step 4: program COREPLL output frequency to 500MHz */ + val = mt7530_read(priv, MT7531_PLLGP_CR0); + val &= ~RG_COREPLL_POSDIV_M; + val |= 2 << RG_COREPLL_POSDIV_S; + mt7530_write(priv, MT7531_PLLGP_CR0, val); + usleep_range(25, 35); + + switch (xtal) { + case HWTRAP_XTAL_FSEL_25MHZ: + val = mt7530_read(priv, MT7531_PLLGP_CR0); + val &= ~RG_COREPLL_SDM_PCW_M; + val |= 0x140000 << RG_COREPLL_SDM_PCW_S; + mt7530_write(priv, MT7531_PLLGP_CR0, val); + break; + case HWTRAP_XTAL_FSEL_40MHZ: + val = mt7530_read(priv, MT7531_PLLGP_CR0); + val &= ~RG_COREPLL_SDM_PCW_M; + val |= 0x190000 << RG_COREPLL_SDM_PCW_S; + mt7530_write(priv, MT7531_PLLGP_CR0, val); + break; + }; + + /* Set feedback divide ratio update signal to high */ + val = mt7530_read(priv, MT7531_PLLGP_CR0); + val |= RG_COREPLL_SDM_PCW_CHG; + mt7530_write(priv, MT7531_PLLGP_CR0, val); + /* Wait for at least 16 XTAL clocks */ + usleep_range(10, 20); + + /* Step 5: set feedback divide ratio update signal to low */ + val = mt7530_read(priv, MT7531_PLLGP_CR0); + val &= ~RG_COREPLL_SDM_PCW_CHG; + mt7530_write(priv, MT7531_PLLGP_CR0, val); + + /* Enable 325M clock for SGMII */ + mt7530_write(priv, MT7531_ANA_PLLGP_CR5, 0xad0000); + + /* Enable 250SSC clock for RGMII */ + mt7530_write(priv, MT7531_ANA_PLLGP_CR2, 0x4f40000); + + /* Step 6: Enable MT7531 PLL */ + val = mt7530_read(priv, MT7531_PLLGP_CR0); + val |= RG_COREPLL_EN; + mt7530_write(priv, MT7531_PLLGP_CR0, val); + + val = mt7530_read(priv, MT7531_PLLGP_EN); + val |= EN_COREPLL; + mt7530_write(priv, MT7531_PLLGP_EN, val); + usleep_range(25, 35); + + return 0; +} + static void mt7530_mib_reset(struct dsa_switch *ds) { @@ -507,6 +615,217 @@ static int mt7530_phy_write(struct dsa_switch *ds, int port, int regnum, return mdiobus_write_nested(priv->bus, port, regnum, val); } +static int +mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad, + int regnum) +{ + struct mii_bus *bus = priv->bus; + struct mt7530_dummy_poll p; + u32 reg, val; + int ret; + + INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) | + MT7531_MDIO_DEV_ADDR(devad) | regnum; + mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + reg = MT7531_MDIO_CL45_READ | MT7531_MDIO_PHY_ADDR(port) | + MT7531_MDIO_DEV_ADDR(devad); + mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + ret = val & MT7531_MDIO_RW_DATA_MASK; +out: + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static int +mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad, + int regnum, u32 data) +{ + struct mii_bus *bus = priv->bus; + struct mt7530_dummy_poll p; + u32 val, reg; + int ret; + + INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) | + MT7531_MDIO_DEV_ADDR(devad) | regnum; + mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + reg = MT7531_MDIO_CL45_WRITE | MT7531_MDIO_PHY_ADDR(port) | + MT7531_MDIO_DEV_ADDR(devad) | data; + mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + +out: + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static int +mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum) +{ + struct mii_bus *bus = priv->bus; + struct mt7530_dummy_poll p; + int ret; + u32 val; + + INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + val = MT7531_MDIO_CL22_READ | MT7531_MDIO_PHY_ADDR(port) | + MT7531_MDIO_REG_ADDR(regnum); + + mt7530_mii_write(priv, MT7531_PHY_IAC, val | MT7531_PHY_ACS_ST); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + ret = val & MT7531_MDIO_RW_DATA_MASK; +out: + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static int +mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum, + u16 data) +{ + struct mii_bus *bus = priv->bus; + struct mt7530_dummy_poll p; + int ret; + u32 reg; + + INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg, + !(reg & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + reg = MT7531_MDIO_CL22_WRITE | MT7531_MDIO_PHY_ADDR(port) | + MT7531_MDIO_REG_ADDR(regnum) | data; + + mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg, + !(reg & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + +out: + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static int +mt7531_ind_phy_read(struct dsa_switch *ds, int port, int regnum) +{ + struct mt7530_priv *priv = ds->priv; + int devad; + int ret; + + if (regnum & MII_ADDR_C45) { + devad = (regnum >> MII_DEVADDR_C45_SHIFT) & 0x1f; + ret = mt7531_ind_c45_phy_read(priv, port, devad, + regnum & MII_REGADDR_C45_MASK); + } else { + ret = mt7531_ind_c22_phy_read(priv, port, regnum); + } + + return ret; +} + +static int +mt7531_ind_phy_write(struct dsa_switch *ds, int port, int regnum, + u16 data) +{ + struct mt7530_priv *priv = ds->priv; + int devad; + int ret; + + if (regnum & MII_ADDR_C45) { + devad = (regnum >> MII_DEVADDR_C45_SHIFT) & 0x1f; + ret = mt7531_ind_c45_phy_write(priv, port, devad, + regnum & MII_REGADDR_C45_MASK, + data); + } else { + ret = mt7531_ind_c22_phy_write(priv, port, regnum, data); + } + + return ret; +} + static void mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data) @@ -623,9 +942,14 @@ unlock_exit: } static int -mt7530_cpu_port_enable(struct mt7530_priv *priv, - int port) +mt753x_cpu_port_enable(struct dsa_switch *ds, int port) { + struct mt7530_priv *priv = ds->priv; + + /* Setup max capability of CPU port at first */ + if (priv->info->cpu_port_config) + priv->info->cpu_port_config(ds, port); + /* Enable Mediatek header mode on the cpu port */ mt7530_write(priv, MT7530_PVC_P(port), PORT_SPEC_TAG); @@ -638,7 +962,7 @@ mt7530_cpu_port_enable(struct mt7530_priv *priv, mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); /* CPU port gets connected to all user ports of - * the switch + * the switch. */ mt7530_write(priv, MT7530_PCR_P(port), PCR_MATRIX(dsa_user_ports(priv->ds))); @@ -1132,27 +1456,42 @@ mt7530_port_vlan_del(struct dsa_switch *ds, int port, return 0; } -static int mt7530_port_mirror_add(struct dsa_switch *ds, int port, +static int mt753x_mirror_port_get(unsigned int id, u32 val) +{ + return (id == ID_MT7531) ? MT7531_MIRROR_PORT_GET(val) : + MIRROR_PORT(val); +} + +static int mt753x_mirror_port_set(unsigned int id, u32 val) +{ + return (id == ID_MT7531) ? MT7531_MIRROR_PORT_SET(val) : + MIRROR_PORT(val); +} + +static int mt753x_port_mirror_add(struct dsa_switch *ds, int port, struct dsa_mall_mirror_tc_entry *mirror, bool ingress) { struct mt7530_priv *priv = ds->priv; + int monitor_port; u32 val; /* Check for existent entry */ if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port)) return -EEXIST; - val = mt7530_read(priv, MT7530_MFC); + val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id)); /* MT7530 only supports one monitor port */ - if (val & MIRROR_EN && MIRROR_PORT(val) != mirror->to_local_port) + monitor_port = mt753x_mirror_port_get(priv->id, val); + if (val & MT753X_MIRROR_EN(priv->id) && + monitor_port != mirror->to_local_port) return -EEXIST; - val |= MIRROR_EN; - val &= ~MIRROR_MASK; - val |= mirror->to_local_port; - mt7530_write(priv, MT7530_MFC, val); + val |= MT753X_MIRROR_EN(priv->id); + val &= ~MT753X_MIRROR_MASK(priv->id); + val |= mt753x_mirror_port_set(priv->id, mirror->to_local_port); + mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val); val = mt7530_read(priv, MT7530_PCR_P(port)); if (ingress) { @@ -1167,7 +1506,7 @@ static int mt7530_port_mirror_add(struct dsa_switch *ds, int port, return 0; } -static void mt7530_port_mirror_del(struct dsa_switch *ds, int port, +static void mt753x_port_mirror_del(struct dsa_switch *ds, int port, struct dsa_mall_mirror_tc_entry *mirror) { struct mt7530_priv *priv = ds->priv; @@ -1184,9 +1523,9 @@ static void mt7530_port_mirror_del(struct dsa_switch *ds, int port, mt7530_write(priv, MT7530_PCR_P(port), val); if (!priv->mirror_rx && !priv->mirror_tx) { - val = mt7530_read(priv, MT7530_MFC); - val &= ~MIRROR_EN; - mt7530_write(priv, MT7530_MFC, val); + val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id)); + val &= ~MT753X_MIRROR_EN(priv->id); + mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val); } } @@ -1293,7 +1632,7 @@ mt7530_setup(struct dsa_switch *ds) PCR_MATRIX_CLR); if (dsa_is_cpu_port(ds, i)) - mt7530_cpu_port_enable(priv, i); + mt753x_cpu_port_enable(ds, i); else mt7530_port_disable(ds, i); @@ -1354,6 +1693,118 @@ mt7530_setup(struct dsa_switch *ds) return 0; } +static int +mt7531_setup(struct dsa_switch *ds) +{ + struct mt7530_priv *priv = ds->priv; + struct mt7530_dummy_poll p; + u32 val, id; + int ret, i; + + /* Reset whole chip through gpio pin or memory-mapped registers for + * different type of hardware + */ + if (priv->mcm) { + reset_control_assert(priv->rstc); + usleep_range(1000, 1100); + reset_control_deassert(priv->rstc); + } else { + gpiod_set_value_cansleep(priv->reset, 0); + usleep_range(1000, 1100); + gpiod_set_value_cansleep(priv->reset, 1); + } + + /* Waiting for MT7530 got to stable */ + INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP); + ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0, + 20, 1000000); + if (ret < 0) { + dev_err(priv->dev, "reset timeout\n"); + return ret; + } + + id = mt7530_read(priv, MT7531_CREV); + id >>= CHIP_NAME_SHIFT; + + if (id != MT7531_ID) { + dev_err(priv->dev, "chip %x can't be supported\n", id); + return -ENODEV; + } + + /* Reset the switch through internal reset */ + mt7530_write(priv, MT7530_SYS_CTRL, + SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | + SYS_CTRL_REG_RST); + + if (mt7531_dual_sgmii_supported(priv)) { + priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII; + + /* Let ds->slave_mii_bus be able to access external phy. */ + mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK, + MT7531_EXT_P_MDC_11); + mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK, + MT7531_EXT_P_MDIO_12); + } else { + priv->p5_intf_sel = P5_INTF_SEL_GMAC5; + } + dev_dbg(ds->dev, "P5 support %s interface\n", + p5_intf_modes(priv->p5_intf_sel)); + + mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK, + MT7531_GPIO0_INTERRUPT); + + /* Let phylink decide the interface later. */ + priv->p5_interface = PHY_INTERFACE_MODE_NA; + priv->p6_interface = PHY_INTERFACE_MODE_NA; + + /* Enable PHY core PLL, since phy_device has not yet been created + * provided for phy_[read,write]_mmd_indirect is called, we provide + * our own mt7531_ind_mmd_phy_[read,write] to complete this + * function. + */ + val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR, + MDIO_MMD_VEND2, CORE_PLL_GROUP4); + val |= MT7531_PHY_PLL_BYPASS_MODE; + val &= ~MT7531_PHY_PLL_OFF; + mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2, + CORE_PLL_GROUP4, val); + + /* BPDU to CPU port */ + mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK, + BIT(MT7530_CPU_PORT)); + mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK, + MT753X_BPDU_CPU_ONLY); + + /* Enable and reset MIB counters */ + mt7530_mib_reset(ds); + + for (i = 0; i < MT7530_NUM_PORTS; i++) { + /* Disable forwarding by default on all ports */ + mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, + PCR_MATRIX_CLR); + + mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR); + + if (dsa_is_cpu_port(ds, i)) + mt753x_cpu_port_enable(ds, i); + else + mt7530_port_disable(ds, i); + + /* Enable consistent egress tag */ + mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK, + PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); + } + + ds->configure_vlan_while_not_filtering = true; + + /* Flush the FDB table */ + ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); + if (ret < 0) + return ret; + + return 0; +} + static bool mt7530_phy_mode_supported(struct dsa_switch *ds, int port, const struct phylink_link_state *state) @@ -1385,6 +1836,40 @@ mt7530_phy_mode_supported(struct dsa_switch *ds, int port, return true; } +static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port) +{ + return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII); +} + +static bool +mt7531_phy_mode_supported(struct dsa_switch *ds, int port, + const struct phylink_link_state *state) +{ + struct mt7530_priv *priv = ds->priv; + + switch (port) { + case 0 ... 4: /* Internal phy */ + if (state->interface != PHY_INTERFACE_MODE_GMII) + return false; + break; + case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */ + if (mt7531_is_rgmii_port(priv, port)) + return phy_interface_mode_is_rgmii(state->interface); + fallthrough; + case 6: /* 1st cpu port supports sgmii/8023z only */ + if (state->interface != PHY_INTERFACE_MODE_SGMII && + !phy_interface_mode_is_8023z(state->interface)) + return false; + break; + default: + dev_err(priv->dev, "%s: unsupported port: %i\n", __func__, + port); + return false; + } + + return true; +} + static bool mt753x_phy_mode_supported(struct dsa_switch *ds, int port, const struct phylink_link_state *state) @@ -1417,6 +1902,227 @@ mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode, return 0; } +static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port, + phy_interface_t interface, + struct phy_device *phydev) +{ + u32 val; + + if (!mt7531_is_rgmii_port(priv, port)) { + dev_err(priv->dev, "RGMII mode is not available for port %d\n", + port); + return -EINVAL; + } + + val = mt7530_read(priv, MT7531_CLKGEN_CTRL); + val |= GP_CLK_EN; + val &= ~GP_MODE_MASK; + val |= GP_MODE(MT7531_GP_MODE_RGMII); + val &= ~CLK_SKEW_IN_MASK; + val |= CLK_SKEW_IN(MT7531_CLK_SKEW_NO_CHG); + val &= ~CLK_SKEW_OUT_MASK; + val |= CLK_SKEW_OUT(MT7531_CLK_SKEW_NO_CHG); + val |= TXCLK_NO_REVERSE | RXCLK_NO_DELAY; + + /* Do not adjust rgmii delay when vendor phy driver presents. */ + if (!phydev || phy_driver_is_genphy(phydev)) { + val &= ~(TXCLK_NO_REVERSE | RXCLK_NO_DELAY); + switch (interface) { + case PHY_INTERFACE_MODE_RGMII: + val |= TXCLK_NO_REVERSE; + val |= RXCLK_NO_DELAY; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + val |= TXCLK_NO_REVERSE; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + val |= RXCLK_NO_DELAY; + break; + case PHY_INTERFACE_MODE_RGMII_ID: + break; + default: + return -EINVAL; + } + } + mt7530_write(priv, MT7531_CLKGEN_CTRL, val); + + return 0; +} + +static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port, + unsigned long *supported) +{ + /* Port5 supports ethier RGMII or SGMII. + * Port6 supports SGMII only. + */ + switch (port) { + case 5: + if (mt7531_is_rgmii_port(priv, port)) + break; + fallthrough; + case 6: + phylink_set(supported, 1000baseX_Full); + phylink_set(supported, 2500baseX_Full); + phylink_set(supported, 2500baseT_Full); + } +} + +static void +mt7531_sgmii_link_up_force(struct dsa_switch *ds, int port, + unsigned int mode, phy_interface_t interface, + int speed, int duplex) +{ + struct mt7530_priv *priv = ds->priv; + unsigned int val; + + /* For adjusting speed and duplex of SGMII force mode. */ + if (interface != PHY_INTERFACE_MODE_SGMII || + phylink_autoneg_inband(mode)) + return; + + /* SGMII force mode setting */ + val = mt7530_read(priv, MT7531_SGMII_MODE(port)); + val &= ~MT7531_SGMII_IF_MODE_MASK; + + switch (speed) { + case SPEED_10: + val |= MT7531_SGMII_FORCE_SPEED_10; + break; + case SPEED_100: + val |= MT7531_SGMII_FORCE_SPEED_100; + break; + case SPEED_1000: + val |= MT7531_SGMII_FORCE_SPEED_1000; + break; + } + + /* MT7531 SGMII 1G force mode can only work in full duplex mode, + * no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not. + */ + if ((speed == SPEED_10 || speed == SPEED_100) && + duplex != DUPLEX_FULL) + val |= MT7531_SGMII_FORCE_HALF_DUPLEX; + + mt7530_write(priv, MT7531_SGMII_MODE(port), val); +} + +static bool mt753x_is_mac_port(u32 port) +{ + return (port == 5 || port == 6); +} + +static int mt7531_sgmii_setup_mode_force(struct mt7530_priv *priv, u32 port, + phy_interface_t interface) +{ + u32 val; + + if (!mt753x_is_mac_port(port)) + return -EINVAL; + + mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port), + MT7531_SGMII_PHYA_PWD); + + val = mt7530_read(priv, MT7531_PHYA_CTRL_SIGNAL3(port)); + val &= ~MT7531_RG_TPHY_SPEED_MASK; + /* Setup 2.5 times faster clock for 2.5Gbps data speeds with 10B/8B + * encoding. + */ + val |= (interface == PHY_INTERFACE_MODE_2500BASEX) ? + MT7531_RG_TPHY_SPEED_3_125G : MT7531_RG_TPHY_SPEED_1_25G; + mt7530_write(priv, MT7531_PHYA_CTRL_SIGNAL3(port), val); + + mt7530_clear(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE); + + /* MT7531 SGMII 1G and 2.5G force mode can only work in full duplex + * mode, no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not. + */ + mt7530_rmw(priv, MT7531_SGMII_MODE(port), + MT7531_SGMII_IF_MODE_MASK | MT7531_SGMII_REMOTE_FAULT_DIS, + MT7531_SGMII_FORCE_SPEED_1000); + + mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0); + + return 0; +} + +static int mt7531_sgmii_setup_mode_an(struct mt7530_priv *priv, int port, + phy_interface_t interface) +{ + if (!mt753x_is_mac_port(port)) + return -EINVAL; + + mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port), + MT7531_SGMII_PHYA_PWD); + + mt7530_rmw(priv, MT7531_PHYA_CTRL_SIGNAL3(port), + MT7531_RG_TPHY_SPEED_MASK, MT7531_RG_TPHY_SPEED_1_25G); + + mt7530_set(priv, MT7531_SGMII_MODE(port), + MT7531_SGMII_REMOTE_FAULT_DIS | + MT7531_SGMII_SPEED_DUPLEX_AN); + + mt7530_rmw(priv, MT7531_PCS_SPEED_ABILITY(port), + MT7531_SGMII_TX_CONFIG_MASK, 1); + + mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE); + + mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_RESTART); + + mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0); + + return 0; +} + +static void mt7531_sgmii_restart_an(struct dsa_switch *ds, int port) +{ + struct mt7530_priv *priv = ds->priv; + u32 val; + + /* Only restart AN when AN is enabled */ + val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port)); + if (val & MT7531_SGMII_AN_ENABLE) { + val |= MT7531_SGMII_AN_RESTART; + mt7530_write(priv, MT7531_PCS_CONTROL_1(port), val); + } +} + +static int +mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, + phy_interface_t interface) +{ + struct mt7530_priv *priv = ds->priv; + struct phy_device *phydev; + struct dsa_port *dp; + + if (!mt753x_is_mac_port(port)) { + dev_err(priv->dev, "port %d is not a MAC port\n", port); + return -EINVAL; + } + + switch (interface) { + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + dp = dsa_to_port(ds, port); + phydev = dp->slave->phydev; + return mt7531_rgmii_setup(priv, port, interface, phydev); + case PHY_INTERFACE_MODE_SGMII: + return mt7531_sgmii_setup_mode_an(priv, port, interface); + case PHY_INTERFACE_MODE_NA: + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_2500BASEX: + if (phylink_autoneg_inband(mode)) + return -EINVAL; + + return mt7531_sgmii_setup_mode_force(priv, port, interface); + default: + return -EINVAL; + } + + return -EINVAL; +} + static int mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode, const struct phylink_link_state *state) @@ -1448,6 +2154,8 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, if (mt753x_mac_config(ds, port, mode, state) < 0) goto unsupported; + if (priv->p5_intf_sel != P5_DISABLED) + priv->p5_interface = state->interface; break; case 6: /* 1st cpu port */ if (priv->p6_interface == state->interface) @@ -1467,7 +2175,8 @@ unsupported: return; } - if (phylink_autoneg_inband(mode)) { + if (phylink_autoneg_inband(mode) && + state->interface != PHY_INTERFACE_MODE_SGMII) { dev_err(ds->dev, "%s: in-band negotiation unsupported\n", __func__); return; @@ -1477,7 +2186,7 @@ unsupported: mcr_new = mcr_cur; mcr_new &= ~PMCR_LINK_SETTINGS_MASK; mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | - PMCR_BACKPR_EN | PMCR_FORCE_MODE; + PMCR_BACKPR_EN | PMCR_FORCE_MODE_ID(priv->id); /* Are we connected to external phy */ if (port == 5 && dsa_is_user_port(ds, 5)) @@ -1487,7 +2196,18 @@ unsupported: mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); } -static void mt7530_phylink_mac_link_down(struct dsa_switch *ds, int port, +static void +mt753x_phylink_mac_an_restart(struct dsa_switch *ds, int port) +{ + struct mt7530_priv *priv = ds->priv; + + if (!priv->info->mac_pcs_an_restart) + return; + + priv->info->mac_pcs_an_restart(ds, port); +} + +static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { @@ -1496,7 +2216,19 @@ static void mt7530_phylink_mac_link_down(struct dsa_switch *ds, int port, mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); } -static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port, +static void mt753x_mac_pcs_link_up(struct dsa_switch *ds, int port, + unsigned int mode, phy_interface_t interface, + int speed, int duplex) +{ + struct mt7530_priv *priv = ds->priv; + + if (!priv->info->mac_pcs_link_up) + return; + + priv->info->mac_pcs_link_up(ds, port, mode, interface, speed, duplex); +} + +static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface, struct phy_device *phydev, @@ -1506,8 +2238,19 @@ static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port, struct mt7530_priv *priv = ds->priv; u32 mcr; + mt753x_mac_pcs_link_up(ds, port, mode, interface, speed, duplex); + mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK; + /* MT753x MAC works in 1G full duplex mode for all up-clocked + * variants. + */ + if (interface == PHY_INTERFACE_MODE_TRGMII || + (phy_interface_mode_is_8023z(interface))) { + speed = SPEED_1000; + duplex = DUPLEX_FULL; + } + switch (speed) { case SPEED_1000: mcr |= PMCR_FORCE_SPEED_1000; @@ -1527,6 +2270,45 @@ static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port, mt7530_set(priv, MT7530_PMCR_P(port), mcr); } +static int +mt7531_cpu_port_config(struct dsa_switch *ds, int port) +{ + struct mt7530_priv *priv = ds->priv; + phy_interface_t interface; + int speed; + + switch (port) { + case 5: + if (mt7531_is_rgmii_port(priv, port)) + interface = PHY_INTERFACE_MODE_RGMII; + else + interface = PHY_INTERFACE_MODE_2500BASEX; + + priv->p5_interface = interface; + break; + case 6: + interface = PHY_INTERFACE_MODE_2500BASEX; + + mt7531_pad_setup(ds, interface); + + priv->p6_interface = interface; + break; + } + + if (interface == PHY_INTERFACE_MODE_2500BASEX) + speed = SPEED_2500; + else + speed = SPEED_1000; + + mt7531_mac_config(ds, port, MLO_AN_FIXED, interface); + mt7530_write(priv, MT7530_PMCR_P(port), + PMCR_CPU_PORT_SETTING(priv->id)); + mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL, + speed, DUPLEX_FULL, true, true); + + return 0; +} + static void mt7530_mac_port_validate(struct dsa_switch *ds, int port, unsigned long *supported) @@ -1535,6 +2317,14 @@ mt7530_mac_port_validate(struct dsa_switch *ds, int port, phylink_set(supported, 1000baseX_Full); } +static void mt7531_mac_port_validate(struct dsa_switch *ds, int port, + unsigned long *supported) +{ + struct mt7530_priv *priv = ds->priv; + + mt7531_sgmii_validate(priv, port, supported); +} + static void mt753x_phylink_validate(struct dsa_switch *ds, int port, unsigned long *supported, @@ -1551,7 +2341,8 @@ mt753x_phylink_validate(struct dsa_switch *ds, int port, phylink_set_port_modes(mask); - if (state->interface != PHY_INTERFACE_MODE_TRGMII) { + if (state->interface != PHY_INTERFACE_MODE_TRGMII || + !phy_interface_mode_is_8023z(state->interface)) { phylink_set(mask, 10baseT_Half); phylink_set(mask, 10baseT_Full); phylink_set(mask, 100baseT_Half); @@ -1570,6 +2361,11 @@ mt753x_phylink_validate(struct dsa_switch *ds, int port, linkmode_and(supported, supported, mask); linkmode_and(state->advertising, state->advertising, mask); + + /* We can only operate at 2500BaseX or 1000BaseX. If requested + * to advertise both, only report advertising at 2500BaseX. + */ + phylink_helper_basex_speed(state); } static int @@ -1613,6 +2409,57 @@ mt7530_phylink_mac_link_state(struct dsa_switch *ds, int port, } static int +mt7531_sgmii_pcs_get_state_an(struct mt7530_priv *priv, int port, + struct phylink_link_state *state) +{ + u32 status, val; + u16 config_reg; + + status = mt7530_read(priv, MT7531_PCS_CONTROL_1(port)); + state->link = !!(status & MT7531_SGMII_LINK_STATUS); + if (state->interface == PHY_INTERFACE_MODE_SGMII && + (status & MT7531_SGMII_AN_ENABLE)) { + val = mt7530_read(priv, MT7531_PCS_SPEED_ABILITY(port)); + config_reg = val >> 16; + + switch (config_reg & LPA_SGMII_SPD_MASK) { + case LPA_SGMII_1000: + state->speed = SPEED_1000; + break; + case LPA_SGMII_100: + state->speed = SPEED_100; + break; + case LPA_SGMII_10: + state->speed = SPEED_10; + break; + default: + dev_err(priv->dev, "invalid sgmii PHY speed\n"); + state->link = false; + return -EINVAL; + } + + if (config_reg & LPA_SGMII_FULL_DUPLEX) + state->duplex = DUPLEX_FULL; + else + state->duplex = DUPLEX_HALF; + } + + return 0; +} + +static int +mt7531_phylink_mac_link_state(struct dsa_switch *ds, int port, + struct phylink_link_state *state) +{ + struct mt7530_priv *priv = ds->priv; + + if (state->interface == PHY_INTERFACE_MODE_SGMII) + return mt7531_sgmii_pcs_get_state_an(priv, port, state); + + return -EOPNOTSUPP; +} + +static int mt753x_phylink_mac_link_state(struct dsa_switch *ds, int port, struct phylink_link_state *state) { @@ -1665,13 +2512,14 @@ static const struct dsa_switch_ops mt7530_switch_ops = { .port_vlan_prepare = mt7530_port_vlan_prepare, .port_vlan_add = mt7530_port_vlan_add, .port_vlan_del = mt7530_port_vlan_del, - .port_mirror_add = mt7530_port_mirror_add, - .port_mirror_del = mt7530_port_mirror_del, + .port_mirror_add = mt753x_port_mirror_add, + .port_mirror_del = mt753x_port_mirror_del, .phylink_validate = mt753x_phylink_validate, .phylink_mac_link_state = mt753x_phylink_mac_link_state, .phylink_mac_config = mt753x_phylink_mac_config, - .phylink_mac_link_down = mt7530_phylink_mac_link_down, - .phylink_mac_link_up = mt7530_phylink_mac_link_up, + .phylink_mac_an_restart = mt753x_phylink_mac_an_restart, + .phylink_mac_link_down = mt753x_phylink_mac_link_down, + .phylink_mac_link_up = mt753x_phylink_mac_link_up, }; static const struct mt753x_info mt753x_table[] = { @@ -1697,11 +2545,26 @@ static const struct mt753x_info mt753x_table[] = { .mac_port_get_state = mt7530_phylink_mac_link_state, .mac_port_config = mt7530_mac_config, }, + [ID_MT7531] = { + .id = ID_MT7531, + .sw_setup = mt7531_setup, + .phy_read = mt7531_ind_phy_read, + .phy_write = mt7531_ind_phy_write, + .pad_setup = mt7531_pad_setup, + .cpu_port_config = mt7531_cpu_port_config, + .phy_mode_supported = mt7531_phy_mode_supported, + .mac_port_validate = mt7531_mac_port_validate, + .mac_port_get_state = mt7531_phylink_mac_link_state, + .mac_port_config = mt7531_mac_config, + .mac_pcs_an_restart = mt7531_sgmii_restart_an, + .mac_pcs_link_up = mt7531_sgmii_link_up_force, + }, }; static const struct of_device_id mt7530_of_match[] = { { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], }, { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], }, + { .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, mt7530_of_match); |