summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/qca/ar9331.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/qca/ar9331.c')
-rw-r--r--drivers/net/dsa/qca/ar9331.c73
1 files changed, 72 insertions, 1 deletions
diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
index 6686192e1883..563d8a279030 100644
--- a/drivers/net/dsa/qca/ar9331.c
+++ b/drivers/net/dsa/qca/ar9331.c
@@ -101,6 +101,23 @@
AR9331_SW_PORT_STATUS_RX_FLOW_EN | AR9331_SW_PORT_STATUS_TX_FLOW_EN | \
AR9331_SW_PORT_STATUS_SPEED_M)
+#define AR9331_SW_REG_PORT_CTRL(_port) (0x104 + (_port) * 0x100)
+#define AR9331_SW_PORT_CTRL_HEAD_EN BIT(11)
+#define AR9331_SW_PORT_CTRL_PORT_STATE GENMASK(2, 0)
+#define AR9331_SW_PORT_CTRL_PORT_STATE_DISABLED 0
+#define AR9331_SW_PORT_CTRL_PORT_STATE_BLOCKING 1
+#define AR9331_SW_PORT_CTRL_PORT_STATE_LISTENING 2
+#define AR9331_SW_PORT_CTRL_PORT_STATE_LEARNING 3
+#define AR9331_SW_PORT_CTRL_PORT_STATE_FORWARD 4
+
+#define AR9331_SW_REG_PORT_VLAN(_port) (0x108 + (_port) * 0x100)
+#define AR9331_SW_PORT_VLAN_8021Q_MODE GENMASK(31, 30)
+#define AR9331_SW_8021Q_MODE_SECURE 3
+#define AR9331_SW_8021Q_MODE_CHECK 2
+#define AR9331_SW_8021Q_MODE_FALLBACK 1
+#define AR9331_SW_8021Q_MODE_NONE 0
+#define AR9331_SW_PORT_VLAN_PORT_VID_MEMBER GENMASK(25, 16)
+
/* MIB registers */
#define AR9331_MIB_COUNTER(x) (0x20000 + ((x) * 0x100))
@@ -371,12 +388,60 @@ static int ar9331_sw_mbus_init(struct ar9331_sw_priv *priv)
return 0;
}
-static int ar9331_sw_setup(struct dsa_switch *ds)
+static int ar9331_sw_setup_port(struct dsa_switch *ds, int port)
{
struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
struct regmap *regmap = priv->regmap;
+ u32 port_mask, port_ctrl, val;
int ret;
+ /* Generate default port settings */
+ port_ctrl = FIELD_PREP(AR9331_SW_PORT_CTRL_PORT_STATE,
+ AR9331_SW_PORT_CTRL_PORT_STATE_FORWARD);
+
+ if (dsa_is_cpu_port(ds, port)) {
+ /* CPU port should be allowed to communicate with all user
+ * ports.
+ */
+ port_mask = dsa_user_ports(ds);
+ /* Enable Atheros header on CPU port. This will allow us
+ * communicate with each port separately
+ */
+ port_ctrl |= AR9331_SW_PORT_CTRL_HEAD_EN;
+ } else if (dsa_is_user_port(ds, port)) {
+ /* User ports should communicate only with the CPU port.
+ */
+ port_mask = BIT(dsa_upstream_port(ds, port));
+ } else {
+ /* Other ports do not need to communicate at all */
+ port_mask = 0;
+ }
+
+ val = FIELD_PREP(AR9331_SW_PORT_VLAN_8021Q_MODE,
+ AR9331_SW_8021Q_MODE_NONE) |
+ FIELD_PREP(AR9331_SW_PORT_VLAN_PORT_VID_MEMBER, port_mask);
+
+ ret = regmap_write(regmap, AR9331_SW_REG_PORT_VLAN(port), val);
+ if (ret)
+ goto error;
+
+ ret = regmap_write(regmap, AR9331_SW_REG_PORT_CTRL(port), port_ctrl);
+ if (ret)
+ goto error;
+
+ return 0;
+error:
+ dev_err(priv->dev, "%s: error: %i\n", __func__, ret);
+
+ return ret;
+}
+
+static int ar9331_sw_setup(struct dsa_switch *ds)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ struct regmap *regmap = priv->regmap;
+ int ret, i;
+
ret = ar9331_sw_reset(priv);
if (ret)
return ret;
@@ -402,6 +467,12 @@ static int ar9331_sw_setup(struct dsa_switch *ds)
if (ret)
goto error;
+ for (i = 0; i < ds->num_ports; i++) {
+ ret = ar9331_sw_setup_port(ds, i);
+ if (ret)
+ goto error;
+ }
+
ds->configure_vlan_while_not_filtering = false;
return 0;