diff options
Diffstat (limited to 'drivers/net/dsa/qca/qca8k-8xxx.c')
| -rw-r--r-- | drivers/net/dsa/qca/qca8k-8xxx.c | 2064 |
1 files changed, 2064 insertions, 0 deletions
diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c new file mode 100644 index 000000000000..1d3e7782a71f --- /dev/null +++ b/drivers/net/dsa/qca/qca8k-8xxx.c @@ -0,0 +1,2064 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name> + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2016 John Crispin <john@phrozen.org> + */ + +#include <linux/module.h> +#include <linux/phy.h> +#include <linux/netdevice.h> +#include <linux/bitfield.h> +#include <linux/regmap.h> +#include <net/dsa.h> +#include <linux/of_net.h> +#include <linux/of_mdio.h> +#include <linux/of_platform.h> +#include <linux/mdio.h> +#include <linux/phylink.h> +#include <linux/gpio/consumer.h> +#include <linux/etherdevice.h> +#include <linux/dsa/tag_qca.h> + +#include "qca8k.h" + +static void +qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page) +{ + regaddr >>= 1; + *r1 = regaddr & 0x1e; + + regaddr >>= 5; + *r2 = regaddr & 0x7; + + regaddr >>= 3; + *page = regaddr & 0x3ff; +} + +static int +qca8k_set_lo(struct qca8k_priv *priv, int phy_id, u32 regnum, u16 lo) +{ + u16 *cached_lo = &priv->mdio_cache.lo; + struct mii_bus *bus = priv->bus; + int ret; + + if (lo == *cached_lo) + return 0; + + ret = bus->write(bus, phy_id, regnum, lo); + if (ret < 0) + dev_err_ratelimited(&bus->dev, + "failed to write qca8k 32bit lo register\n"); + + *cached_lo = lo; + return 0; +} + +static int +qca8k_set_hi(struct qca8k_priv *priv, int phy_id, u32 regnum, u16 hi) +{ + u16 *cached_hi = &priv->mdio_cache.hi; + struct mii_bus *bus = priv->bus; + int ret; + + if (hi == *cached_hi) + return 0; + + ret = bus->write(bus, phy_id, regnum, hi); + if (ret < 0) + dev_err_ratelimited(&bus->dev, + "failed to write qca8k 32bit hi register\n"); + + *cached_hi = hi; + return 0; +} + +static int +qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val) +{ + int ret; + + ret = bus->read(bus, phy_id, regnum); + if (ret >= 0) { + *val = ret; + ret = bus->read(bus, phy_id, regnum + 1); + *val |= ret << 16; + } + + if (ret < 0) { + dev_err_ratelimited(&bus->dev, + "failed to read qca8k 32bit register\n"); + *val = 0; + return ret; + } + + return 0; +} + +static void +qca8k_mii_write32(struct qca8k_priv *priv, int phy_id, u32 regnum, u32 val) +{ + u16 lo, hi; + int ret; + + lo = val & 0xffff; + hi = (u16)(val >> 16); + + ret = qca8k_set_lo(priv, phy_id, regnum, lo); + if (ret >= 0) + ret = qca8k_set_hi(priv, phy_id, regnum + 1, hi); +} + +static int +qca8k_set_page(struct qca8k_priv *priv, u16 page) +{ + u16 *cached_page = &priv->mdio_cache.page; + struct mii_bus *bus = priv->bus; + int ret; + + if (page == *cached_page) + return 0; + + ret = bus->write(bus, 0x18, 0, page); + if (ret < 0) { + dev_err_ratelimited(&bus->dev, + "failed to set qca8k page\n"); + return ret; + } + + *cached_page = page; + usleep_range(1000, 2000); + return 0; +} + +static void qca8k_rw_reg_ack_handler(struct dsa_switch *ds, struct sk_buff *skb) +{ + struct qca8k_mgmt_eth_data *mgmt_eth_data; + struct qca8k_priv *priv = ds->priv; + struct qca_mgmt_ethhdr *mgmt_ethhdr; + u8 len, cmd; + + mgmt_ethhdr = (struct qca_mgmt_ethhdr *)skb_mac_header(skb); + mgmt_eth_data = &priv->mgmt_eth_data; + + cmd = FIELD_GET(QCA_HDR_MGMT_CMD, mgmt_ethhdr->command); + len = FIELD_GET(QCA_HDR_MGMT_LENGTH, mgmt_ethhdr->command); + + /* Make sure the seq match the requested packet */ + if (mgmt_ethhdr->seq == mgmt_eth_data->seq) + mgmt_eth_data->ack = true; + + if (cmd == MDIO_READ) { + mgmt_eth_data->data[0] = mgmt_ethhdr->mdio_data; + + /* Get the rest of the 12 byte of data. + * The read/write function will extract the requested data. + */ + if (len > QCA_HDR_MGMT_DATA1_LEN) + memcpy(mgmt_eth_data->data + 1, skb->data, + QCA_HDR_MGMT_DATA2_LEN); + } + + complete(&mgmt_eth_data->rw_done); +} + +static struct sk_buff *qca8k_alloc_mdio_header(enum mdio_cmd cmd, u32 reg, u32 *val, + int priority, unsigned int len) +{ + struct qca_mgmt_ethhdr *mgmt_ethhdr; + unsigned int real_len; + struct sk_buff *skb; + u32 *data2; + u16 hdr; + + skb = dev_alloc_skb(QCA_HDR_MGMT_PKT_LEN); + if (!skb) + return NULL; + + /* Max value for len reg is 15 (0xf) but the switch actually return 16 byte + * Actually for some reason the steps are: + * 0: nothing + * 1-4: first 4 byte + * 5-6: first 12 byte + * 7-15: all 16 byte + */ + if (len == 16) + real_len = 15; + else + real_len = len; + + skb_reset_mac_header(skb); + skb_set_network_header(skb, skb->len); + + mgmt_ethhdr = skb_push(skb, QCA_HDR_MGMT_HEADER_LEN + QCA_HDR_LEN); + + hdr = FIELD_PREP(QCA_HDR_XMIT_VERSION, QCA_HDR_VERSION); + hdr |= FIELD_PREP(QCA_HDR_XMIT_PRIORITY, priority); + hdr |= QCA_HDR_XMIT_FROM_CPU; + hdr |= FIELD_PREP(QCA_HDR_XMIT_DP_BIT, BIT(0)); + hdr |= FIELD_PREP(QCA_HDR_XMIT_CONTROL, QCA_HDR_XMIT_TYPE_RW_REG); + + mgmt_ethhdr->command = FIELD_PREP(QCA_HDR_MGMT_ADDR, reg); + mgmt_ethhdr->command |= FIELD_PREP(QCA_HDR_MGMT_LENGTH, real_len); + mgmt_ethhdr->command |= FIELD_PREP(QCA_HDR_MGMT_CMD, cmd); + mgmt_ethhdr->command |= FIELD_PREP(QCA_HDR_MGMT_CHECK_CODE, + QCA_HDR_MGMT_CHECK_CODE_VAL); + + if (cmd == MDIO_WRITE) + mgmt_ethhdr->mdio_data = *val; + + mgmt_ethhdr->hdr = htons(hdr); + + data2 = skb_put_zero(skb, QCA_HDR_MGMT_DATA2_LEN + QCA_HDR_MGMT_PADDING_LEN); + if (cmd == MDIO_WRITE && len > QCA_HDR_MGMT_DATA1_LEN) + memcpy(data2, val + 1, len - QCA_HDR_MGMT_DATA1_LEN); + + return skb; +} + +static void qca8k_mdio_header_fill_seq_num(struct sk_buff *skb, u32 seq_num) +{ + struct qca_mgmt_ethhdr *mgmt_ethhdr; + + mgmt_ethhdr = (struct qca_mgmt_ethhdr *)skb->data; + mgmt_ethhdr->seq = FIELD_PREP(QCA_HDR_MGMT_SEQ_NUM, seq_num); +} + +static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) +{ + struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data; + struct sk_buff *skb; + bool ack; + int ret; + + skb = qca8k_alloc_mdio_header(MDIO_READ, reg, NULL, + QCA8K_ETHERNET_MDIO_PRIORITY, len); + if (!skb) + return -ENOMEM; + + mutex_lock(&mgmt_eth_data->mutex); + + /* Check mgmt_master if is operational */ + if (!priv->mgmt_master) { + kfree_skb(skb); + mutex_unlock(&mgmt_eth_data->mutex); + return -EINVAL; + } + + skb->dev = priv->mgmt_master; + + reinit_completion(&mgmt_eth_data->rw_done); + + /* Increment seq_num and set it in the mdio pkt */ + mgmt_eth_data->seq++; + qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq); + mgmt_eth_data->ack = false; + + dev_queue_xmit(skb); + + ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, + msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT)); + + *val = mgmt_eth_data->data[0]; + if (len > QCA_HDR_MGMT_DATA1_LEN) + memcpy(val + 1, mgmt_eth_data->data + 1, len - QCA_HDR_MGMT_DATA1_LEN); + + ack = mgmt_eth_data->ack; + + mutex_unlock(&mgmt_eth_data->mutex); + + if (ret <= 0) + return -ETIMEDOUT; + + if (!ack) + return -EINVAL; + + return 0; +} + +static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) +{ + struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data; + struct sk_buff *skb; + bool ack; + int ret; + + skb = qca8k_alloc_mdio_header(MDIO_WRITE, reg, val, + QCA8K_ETHERNET_MDIO_PRIORITY, len); + if (!skb) + return -ENOMEM; + + mutex_lock(&mgmt_eth_data->mutex); + + /* Check mgmt_master if is operational */ + if (!priv->mgmt_master) { + kfree_skb(skb); + mutex_unlock(&mgmt_eth_data->mutex); + return -EINVAL; + } + + skb->dev = priv->mgmt_master; + + reinit_completion(&mgmt_eth_data->rw_done); + + /* Increment seq_num and set it in the mdio pkt */ + mgmt_eth_data->seq++; + qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq); + mgmt_eth_data->ack = false; + + dev_queue_xmit(skb); + + ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, + msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT)); + + ack = mgmt_eth_data->ack; + + mutex_unlock(&mgmt_eth_data->mutex); + + if (ret <= 0) + return -ETIMEDOUT; + + if (!ack) + return -EINVAL; + + return 0; +} + +static int +qca8k_regmap_update_bits_eth(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val) +{ + u32 val = 0; + int ret; + + ret = qca8k_read_eth(priv, reg, &val, sizeof(val)); + if (ret) + return ret; + + val &= ~mask; + val |= write_val; + + return qca8k_write_eth(priv, reg, &val, sizeof(val)); +} + +static int +qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val) +{ + struct qca8k_priv *priv = (struct qca8k_priv *)ctx; + struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + int ret; + + if (!qca8k_read_eth(priv, reg, val, sizeof(*val))) + return 0; + + qca8k_split_addr(reg, &r1, &r2, &page); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + ret = qca8k_set_page(priv, page); + if (ret < 0) + goto exit; + + ret = qca8k_mii_read32(bus, 0x10 | r2, r1, val); + +exit: + mutex_unlock(&bus->mdio_lock); + return ret; +} + +static int +qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val) +{ + struct qca8k_priv *priv = (struct qca8k_priv *)ctx; + struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + int ret; + + if (!qca8k_write_eth(priv, reg, &val, sizeof(val))) + return 0; + + qca8k_split_addr(reg, &r1, &r2, &page); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + ret = qca8k_set_page(priv, page); + if (ret < 0) + goto exit; + + qca8k_mii_write32(priv, 0x10 | r2, r1, val); + +exit: + mutex_unlock(&bus->mdio_lock); + return ret; +} + +static int +qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_val) +{ + struct qca8k_priv *priv = (struct qca8k_priv *)ctx; + struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + u32 val; + int ret; + + if (!qca8k_regmap_update_bits_eth(priv, reg, mask, write_val)) + return 0; + + qca8k_split_addr(reg, &r1, &r2, &page); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + ret = qca8k_set_page(priv, page); + if (ret < 0) + goto exit; + + ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val); + if (ret < 0) + goto exit; + + val &= ~mask; + val |= write_val; + qca8k_mii_write32(priv, 0x10 | r2, r1, val); + +exit: + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static struct regmap_config qca8k_regmap_config = { + .reg_bits = 16, + .val_bits = 32, + .reg_stride = 4, + .max_register = 0x16ac, /* end MIB - Port6 range */ + .reg_read = qca8k_regmap_read, + .reg_write = qca8k_regmap_write, + .reg_update_bits = qca8k_regmap_update_bits, + .rd_table = &qca8k_readable_table, + .disable_locking = true, /* Locking is handled by qca8k read/write */ + .cache_type = REGCACHE_NONE, /* Explicitly disable CACHE */ +}; + +static int +qca8k_phy_eth_busy_wait(struct qca8k_mgmt_eth_data *mgmt_eth_data, + struct sk_buff *read_skb, u32 *val) +{ + struct sk_buff *skb = skb_copy(read_skb, GFP_KERNEL); + bool ack; + int ret; + + reinit_completion(&mgmt_eth_data->rw_done); + + /* Increment seq_num and set it in the copy pkt */ + mgmt_eth_data->seq++; + qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq); + mgmt_eth_data->ack = false; + + dev_queue_xmit(skb); + + ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, + QCA8K_ETHERNET_TIMEOUT); + + ack = mgmt_eth_data->ack; + + if (ret <= 0) + return -ETIMEDOUT; + + if (!ack) + return -EINVAL; + + *val = mgmt_eth_data->data[0]; + + return 0; +} + +static int +qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy, + int regnum, u16 data) +{ + struct sk_buff *write_skb, *clear_skb, *read_skb; + struct qca8k_mgmt_eth_data *mgmt_eth_data; + u32 write_val, clear_val = 0, val; + struct net_device *mgmt_master; + int ret, ret1; + bool ack; + + if (regnum >= QCA8K_MDIO_MASTER_MAX_REG) + return -EINVAL; + + mgmt_eth_data = &priv->mgmt_eth_data; + + write_val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN | + QCA8K_MDIO_MASTER_PHY_ADDR(phy) | + QCA8K_MDIO_MASTER_REG_ADDR(regnum); + + if (read) { + write_val |= QCA8K_MDIO_MASTER_READ; + } else { + write_val |= QCA8K_MDIO_MASTER_WRITE; + write_val |= QCA8K_MDIO_MASTER_DATA(data); + } + + /* Prealloc all the needed skb before the lock */ + write_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, &write_val, + QCA8K_ETHERNET_PHY_PRIORITY, sizeof(write_val)); + if (!write_skb) + return -ENOMEM; + + clear_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, &clear_val, + QCA8K_ETHERNET_PHY_PRIORITY, sizeof(clear_val)); + if (!clear_skb) { + ret = -ENOMEM; + goto err_clear_skb; + } + + read_skb = qca8k_alloc_mdio_header(MDIO_READ, QCA8K_MDIO_MASTER_CTRL, &clear_val, + QCA8K_ETHERNET_PHY_PRIORITY, sizeof(clear_val)); + if (!read_skb) { + ret = -ENOMEM; + goto err_read_skb; + } + + /* Actually start the request: + * 1. Send mdio master packet + * 2. Busy Wait for mdio master command + * 3. Get the data if we are reading + * 4. Reset the mdio master (even with error) + */ + mutex_lock(&mgmt_eth_data->mutex); + + /* Check if mgmt_master is operational */ + mgmt_master = priv->mgmt_master; + if (!mgmt_master) { + mutex_unlock(&mgmt_eth_data->mutex); + ret = -EINVAL; + goto err_mgmt_master; + } + + read_skb->dev = mgmt_master; + clear_skb->dev = mgmt_master; + write_skb->dev = mgmt_master; + + reinit_completion(&mgmt_eth_data->rw_done); + + /* Increment seq_num and set it in the write pkt */ + mgmt_eth_data->seq++; + qca8k_mdio_header_fill_seq_num(write_skb, mgmt_eth_data->seq); + mgmt_eth_data->ack = false; + + dev_queue_xmit(write_skb); + + ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, + QCA8K_ETHERNET_TIMEOUT); + + ack = mgmt_eth_data->ack; + + if (ret <= 0) { + ret = -ETIMEDOUT; + kfree_skb(read_skb); + goto exit; + } + + if (!ack) { + ret = -EINVAL; + kfree_skb(read_skb); + goto exit; + } + + ret = read_poll_timeout(qca8k_phy_eth_busy_wait, ret1, + !(val & QCA8K_MDIO_MASTER_BUSY), 0, + QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, + mgmt_eth_data, read_skb, &val); + + if (ret < 0 && ret1 < 0) { + ret = ret1; + goto exit; + } + + if (read) { + reinit_completion(&mgmt_eth_data->rw_done); + + /* Increment seq_num and set it in the read pkt */ + mgmt_eth_data->seq++; + qca8k_mdio_header_fill_seq_num(read_skb, mgmt_eth_data->seq); + mgmt_eth_data->ack = false; + + dev_queue_xmit(read_skb); + + ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, + QCA8K_ETHERNET_TIMEOUT); + + ack = mgmt_eth_data->ack; + + if (ret <= 0) { + ret = -ETIMEDOUT; + goto exit; + } + + if (!ack) { + ret = -EINVAL; + goto exit; + } + + ret = mgmt_eth_data->data[0] & QCA8K_MDIO_MASTER_DATA_MASK; + } else { + kfree_skb(read_skb); + } +exit: + reinit_completion(&mgmt_eth_data->rw_done); + + /* Increment seq_num and set it in the clear pkt */ + mgmt_eth_data->seq++; + qca8k_mdio_header_fill_seq_num(clear_skb, mgmt_eth_data->seq); + mgmt_eth_data->ack = false; + + dev_queue_xmit(clear_skb); + + wait_for_completion_timeout(&mgmt_eth_data->rw_done, + QCA8K_ETHERNET_TIMEOUT); + + mutex_unlock(&mgmt_eth_data->mutex); + + return ret; + + /* Error handling before lock */ +err_mgmt_master: + kfree_skb(read_skb); +err_read_skb: + kfree_skb(clear_skb); +err_clear_skb: + kfree_skb(write_skb); + + return ret; +} + +static u32 +qca8k_port_to_phy(int port) +{ + /* From Andrew Lunn: + * Port 0 has no internal phy. + * Port 1 has an internal PHY at MDIO address 0. + * Port 2 has an internal PHY at MDIO address 1. + * ... + * Port 5 has an internal PHY at MDIO address 4. + * Port 6 has no internal PHY. + */ + + return port - 1; +} + +static int +qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask) +{ + u16 r1, r2, page; + u32 val; + int ret, ret1; + + qca8k_split_addr(reg, &r1, &r2, &page); + + ret = read_poll_timeout(qca8k_mii_read32, ret1, !(val & mask), 0, + QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, + bus, 0x10 | r2, r1, &val); + + /* Check if qca8k_read has failed for a different reason + * before returnting -ETIMEDOUT + */ + if (ret < 0 && ret1 < 0) + return ret1; + + return ret; +} + +static int +qca8k_mdio_write(struct qca8k_priv *priv, int phy, int regnum, u16 data) +{ + struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + u32 val; + int ret; + + if (regnum >= QCA8K_MDIO_MASTER_MAX_REG) + return -EINVAL; + + val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN | + QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) | + QCA8K_MDIO_MASTER_REG_ADDR(regnum) | + QCA8K_MDIO_MASTER_DATA(data); + + qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + ret = qca8k_set_page(priv, page); + if (ret) + goto exit; + + qca8k_mii_write32(priv, 0x10 | r2, r1, val); + + ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL, + QCA8K_MDIO_MASTER_BUSY); + +exit: + /* even if the busy_wait timeouts try to clear the MASTER_EN */ + qca8k_mii_write32(priv, 0x10 | r2, r1, 0); + + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static int +qca8k_mdio_read(struct qca8k_priv *priv, int phy, int regnum) +{ + struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + u32 val; + int ret; + + if (regnum >= QCA8K_MDIO_MASTER_MAX_REG) + return -EINVAL; + + val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN | + QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) | + QCA8K_MDIO_MASTER_REG_ADDR(regnum); + + qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + ret = qca8k_set_page(priv, page); + if (ret) + goto exit; + + qca8k_mii_write32(priv, 0x10 | r2, r1, val); + + ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL, + QCA8K_MDIO_MASTER_BUSY); + if (ret) + goto exit; + + ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val); + +exit: + /* even if the busy_wait timeouts try to clear the MASTER_EN */ + qca8k_mii_write32(priv, 0x10 | r2, r1, 0); + + mutex_unlock(&bus->mdio_lock); + + if (ret >= 0) + ret = val & QCA8K_MDIO_MASTER_DATA_MASK; + + return ret; +} + +static int +qca8k_internal_mdio_write(struct mii_bus *slave_bus, int phy, int regnum, u16 data) +{ + struct qca8k_priv *priv = slave_bus->priv; + int ret; + + /* Use mdio Ethernet when available, fallback to legacy one on error */ + ret = qca8k_phy_eth_command(priv, false, phy, regnum, data); + if (!ret) + return 0; + + return qca8k_mdio_write(priv, phy, regnum, data); +} + +static int +qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum) +{ + struct qca8k_priv *priv = slave_bus->priv; + int ret; + + /* Use mdio Ethernet when available, fallback to legacy one on error */ + ret = qca8k_phy_eth_command(priv, true, phy, regnum, 0); + if (ret >= 0) + return ret; + + ret = qca8k_mdio_read(priv, phy, regnum); + + if (ret < 0) + return 0xffff; + + return ret; +} + +static int +qca8k_legacy_mdio_write(struct mii_bus *slave_bus, int port, int regnum, u16 data) +{ + port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; + + return qca8k_internal_mdio_write(slave_bus, port, regnum, data); +} + +static int +qca8k_legacy_mdio_read(struct mii_bus *slave_bus, int port, int regnum) +{ + port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; + + return qca8k_internal_mdio_read(slave_bus, port, regnum); +} + +static int +qca8k_mdio_register(struct qca8k_priv *priv) +{ + struct dsa_switch *ds = priv->ds; + struct device_node *mdio; + struct mii_bus *bus; + + bus = devm_mdiobus_alloc(ds->dev); + if (!bus) + return -ENOMEM; + + bus->priv = (void *)priv; + snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d.%d", + ds->dst->index, ds->index); + bus->parent = ds->dev; + bus->phy_mask = ~ds->phys_mii_mask; + ds->slave_mii_bus = bus; + + /* Check if the devicetree declare the port:phy mapping */ + mdio = of_get_child_by_name(priv->dev->of_node, "mdio"); + if (of_device_is_available(mdio)) { + bus->name = "qca8k slave mii"; + bus->read = qca8k_internal_mdio_read; + bus->write = qca8k_internal_mdio_write; + return devm_of_mdiobus_register(priv->dev, bus, mdio); + } + + /* If a mapping can't be found the legacy mapping is used, + * using the qca8k_port_to_phy function + */ + bus->name = "qca8k-legacy slave mii"; + bus->read = qca8k_legacy_mdio_read; + bus->write = qca8k_legacy_mdio_write; + return devm_mdiobus_register(priv->dev, bus); +} + +static int +qca8k_setup_mdio_bus(struct qca8k_priv *priv) +{ + u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg; + struct device_node *ports, *port; + phy_interface_t mode; + int err; + + ports = of_get_child_by_name(priv->dev->of_node, "ports"); + if (!ports) + ports = of_get_child_by_name(priv->dev->of_node, "ethernet-ports"); + + if (!ports) + return -EINVAL; + + for_each_available_child_of_node(ports, port) { + err = of_property_read_u32(port, "reg", ®); + if (err) { + of_node_put(port); + of_node_put(ports); + return err; + } + + if (!dsa_is_user_port(priv->ds, reg)) + continue; + + of_get_phy_mode(port, &mode); + + if (of_property_read_bool(port, "phy-handle") && + mode != PHY_INTERFACE_MODE_INTERNAL) + external_mdio_mask |= BIT(reg); + else + internal_mdio_mask |= BIT(reg); + } + + of_node_put(ports); + if (!external_mdio_mask && !internal_mdio_mask) { + dev_err(priv->dev, "no PHYs are defined.\n"); + return -EINVAL; + } + + /* The QCA8K_MDIO_MASTER_EN Bit, which grants access to PHYs through + * the MDIO_MASTER register also _disconnects_ the external MDC + * passthrough to the internal PHYs. It's not possible to use both + * configurations at the same time! + * + * Because this came up during the review process: + * If the external mdio-bus driver is capable magically disabling + * the QCA8K_MDIO_MASTER_EN and mutex/spin-locking out the qca8k's + * accessors for the time being, it would be possible to pull this + * off. + */ + if (!!external_mdio_mask && !!internal_mdio_mask) { + dev_err(priv->dev, "either internal or external mdio bus configuration is supported.\n"); + return -EINVAL; + } + + if (external_mdio_mask) { + /* Make sure to disable the internal mdio bus in cases + * a dt-overlay and driver reload changed the configuration + */ + + return regmap_clear_bits(priv->regmap, QCA8K_MDIO_MASTER_CTRL, + QCA8K_MDIO_MASTER_EN); + } + + return qca8k_mdio_register(priv); +} + +static int +qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv) +{ + u32 mask = 0; + int ret = 0; + + /* SoC specific settings for ipq8064. + * If more device require this consider adding + * a dedicated binding. + */ + if (of_machine_is_compatible("qcom,ipq8064")) + mask |= QCA8K_MAC_PWR_RGMII0_1_8V; + + /* SoC specific settings for ipq8065 */ + if (of_machine_is_compatible("qcom,ipq8065")) + mask |= QCA8K_MAC_PWR_RGMII1_1_8V; + + if (mask) { + ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL, + QCA8K_MAC_PWR_RGMII0_1_8V | + QCA8K_MAC_PWR_RGMII1_1_8V, + mask); + } + + return ret; +} + +static int qca8k_find_cpu_port(struct dsa_switch *ds) +{ + struct qca8k_priv *priv = ds->priv; + + /* Find the connected cpu port. Valid port are 0 or 6 */ + if (dsa_is_cpu_port(ds, 0)) + return 0; + + dev_dbg(priv->dev, "port 0 is not the CPU port. Checking port 6"); + + if (dsa_is_cpu_port(ds, 6)) + return 6; + + return -EINVAL; +} + +static int +qca8k_setup_of_pws_reg(struct qca8k_priv *priv) +{ + const struct qca8k_match_data *data = priv->info; + struct device_node *node = priv->dev->of_node; + u32 val = 0; + int ret; + + /* QCA8327 require to set to the correct mode. + * His bigger brother QCA8328 have the 172 pin layout. + * Should be applied by default but we set this just to make sure. + */ + if (priv->switch_id == QCA8K_ID_QCA8327) { + /* Set the correct package of 148 pin for QCA8327 */ + if (data->reduced_package) + val |= QCA8327_PWS_PACKAGE148_EN; + + ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN, + val); + if (ret) + return ret; + } + + if (of_property_read_bool(node, "qca,ignore-power-on-sel")) + val |= QCA8K_PWS_POWER_ON_SEL; + + if (of_property_read_bool(node, "qca,led-open-drain")) { + if (!(val & QCA8K_PWS_POWER_ON_SEL)) { + dev_err(priv->dev, "qca,led-open-drain require qca,ignore-power-on-sel to be set."); + return -EINVAL; + } + + val |= QCA8K_PWS_LED_OPEN_EN_CSR; + } + + return qca8k_rmw(priv, QCA8K_REG_PWS, + QCA8K_PWS_LED_OPEN_EN_CSR | QCA8K_PWS_POWER_ON_SEL, + val); +} + +static int +qca8k_parse_port_config(struct qca8k_priv *priv) +{ + int port, cpu_port_index = -1, ret; + struct device_node *port_dn; + phy_interface_t mode; + struct dsa_port *dp; + u32 delay; + + /* We have 2 CPU port. Check them */ + for (port = 0; port < QCA8K_NUM_PORTS; port++) { + /* Skip every other port */ + if (port != 0 && port != 6) + continue; + + dp = dsa_to_port(priv->ds, port); + port_dn = dp->dn; + cpu_port_index++; + + if (!of_device_is_available(port_dn)) + continue; + + ret = of_get_phy_mode(port_dn, &mode); + if (ret) + continue; + + switch (mode) { + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_SGMII: + delay = 0; + + if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay)) + /* Switch regs accept value in ns, convert ps to ns */ + delay = delay / 1000; + else if (mode == PHY_INTERFACE_MODE_RGMII_ID || + mode == PHY_INTERFACE_MODE_RGMII_TXID) + delay = 1; + + if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK, delay)) { + dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value"); + delay = 3; + } + + priv->ports_config.rgmii_tx_delay[cpu_port_index] = delay; + + delay = 0; + + if (!of_property_read_u32(port_dn, "rx-internal-delay-ps", &delay)) + /* Switch regs accept value in ns, convert ps to ns */ + delay = delay / 1000; + else if (mode == PHY_INTERFACE_MODE_RGMII_ID || + mode == PHY_INTERFACE_MODE_RGMII_RXID) + delay = 2; + + if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK, delay)) { + dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value"); + delay = 3; + } + + priv->ports_config.rgmii_rx_delay[cpu_port_index] = delay; + + /* Skip sgmii parsing for rgmii* mode */ + if (mode == PHY_INTERFACE_MODE_RGMII || + mode == PHY_INTERFACE_MODE_RGMII_ID || + mode == PHY_INTERFACE_MODE_RGMII_TXID || + mode == PHY_INTERFACE_MODE_RGMII_RXID) + break; + + if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge")) + priv->ports_config.sgmii_tx_clk_falling_edge = true; + + if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge")) + priv->ports_config.sgmii_rx_clk_falling_edge = true; + + if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) { + priv->ports_config.sgmii_enable_pll = true; + + if (priv->switch_id == QCA8K_ID_QCA8327) { + dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling"); + priv->ports_config.sgmii_enable_pll = false; + } + + if (priv->switch_revision < 2) + dev_warn(priv->dev, "SGMII PLL should NOT be enabled for qca8337 with revision 2 or more."); + } + + break; + default: + continue; + } + } + + return 0; +} + +static void +qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index, + u32 reg) +{ + u32 delay, val = 0; + int ret; + + /* Delay can be declared in 3 different way. + * Mode to rgmii and internal-delay standard binding defined + * rgmii-id or rgmii-tx/rx phy mode set. + * The parse logic set a delay different than 0 only when one + * of the 3 different way is used. In all other case delay is + * not enabled. With ID or TX/RXID delay is enabled and set + * to the default and recommended value. + */ + if (priv->ports_config.rgmii_tx_delay[cpu_port_index]) { + delay = priv->ports_config.rgmii_tx_delay[cpu_port_index]; + + val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) | + QCA8K_PORT_PAD_RGMII_TX_DELAY_EN; + } + + if (priv->ports_config.rgmii_rx_delay[cpu_port_index]) { + delay = priv->ports_config.rgmii_rx_delay[cpu_port_index]; + + val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) | + QCA8K_PORT_PAD_RGMII_RX_DELAY_EN; + } + + /* Set RGMII delay based on the selected values */ + ret = qca8k_rmw(priv, reg, + QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK | + QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK | + QCA8K_PORT_PAD_RGMII_TX_DELAY_EN | + QCA8K_PORT_PAD_RGMII_RX_DELAY_EN, + val); + if (ret) + dev_err(priv->dev, "Failed to set internal delay for CPU port%d", + cpu_port_index == QCA8K_CPU_PORT0 ? 0 : 6); +} + +static struct phylink_pcs * +qca8k_phylink_mac_select_pcs(struct dsa_switch *ds, int port, + phy_interface_t interface) +{ + struct qca8k_priv *priv = ds->priv; + struct phylink_pcs *pcs = NULL; + + switch (interface) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: + switch (port) { + case 0: + pcs = &priv->pcs_port_0.pcs; + break; + + case 6: + pcs = &priv->pcs_port_6.pcs; + break; + } + break; + + default: + break; + } + + return pcs; +} + +static void +qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, + const struct phylink_link_state *state) +{ + struct qca8k_priv *priv = ds->priv; + int cpu_port_index; + u32 reg; + + switch (port) { + case 0: /* 1st CPU port */ + if (state->interface != PHY_INTERFACE_MODE_RGMII && + state->interface != PHY_INTERFACE_MODE_RGMII_ID && + state->interface != PHY_INTERFACE_MODE_RGMII_TXID && + state->interface != PHY_INTERFACE_MODE_RGMII_RXID && + state->interface != PHY_INTERFACE_MODE_SGMII) + return; + + reg = QCA8K_REG_PORT0_PAD_CTRL; + cpu_port_index = QCA8K_CPU_PORT0; + break; + case 1: + case 2: + case 3: + case 4: + case 5: + /* Internal PHY, nothing to do */ + return; + case 6: /* 2nd CPU port / external PHY */ + if (state->interface != PHY_INTERFACE_MODE_RGMII && + state->interface != PHY_INTERFACE_MODE_RGMII_ID && + state->interface != PHY_INTERFACE_MODE_RGMII_TXID && + state->interface != PHY_INTERFACE_MODE_RGMII_RXID && + state->interface != PHY_INTERFACE_MODE_SGMII && + state->interface != PHY_INTERFACE_MODE_1000BASEX) + return; + + reg = QCA8K_REG_PORT6_PAD_CTRL; + cpu_port_index = QCA8K_CPU_PORT6; + break; + default: + dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); + return; + } + + if (port != 6 && phylink_autoneg_inband(mode)) { + dev_err(ds->dev, "%s: in-band negotiation unsupported\n", + __func__); + return; + } + + switch (state->interface) { + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN); + + /* Configure rgmii delay */ + qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); + + /* QCA8337 requires to set rgmii rx delay for all ports. + * This is enabled through PORT5_PAD_CTRL for all ports, + * rather than individual port registers. + */ + if (priv->switch_id == QCA8K_ID_QCA8337) + qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL, + QCA8K_PORT_PAD_RGMII_RX_DELAY_EN); + break; + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: + /* Enable SGMII on the port */ + qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN); + break; + default: + dev_err(ds->dev, "xMII mode %s not supported for port %d\n", + phy_modes(state->interface), port); + return; + } +} + +static void qca8k_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + switch (port) { + case 0: /* 1st CPU port */ + phy_interface_set_rgmii(config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_SGMII, + config->supported_interfaces); + break; + + case 1: + case 2: + case 3: + case 4: + case 5: + /* Internal PHY */ + __set_bit(PHY_INTERFACE_MODE_GMII, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + break; + + case 6: /* 2nd CPU port / external PHY */ + phy_interface_set_rgmii(config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_SGMII, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, + config->supported_interfaces); + break; + } + + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000FD; + + config->legacy_pre_march2020 = false; +} + +static void +qca8k_phylink_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, + phy_interface_t interface) +{ + struct qca8k_priv *priv = ds->priv; + + qca8k_port_set_status(priv, port, 0); +} + +static void +qca8k_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode, + phy_interface_t interface, struct phy_device *phydev, + int speed, int duplex, bool tx_pause, bool rx_pause) +{ + struct qca8k_priv *priv = ds->priv; + u32 reg; + + if (phylink_autoneg_inband(mode)) { + reg = QCA8K_PORT_STATUS_LINK_AUTO; + } else { + switch (speed) { + case SPEED_10: + reg = QCA8K_PORT_STATUS_SPEED_10; + break; + case SPEED_100: + reg = QCA8K_PORT_STATUS_SPEED_100; + break; + case SPEED_1000: + reg = QCA8K_PORT_STATUS_SPEED_1000; + break; + default: + reg = QCA8K_PORT_STATUS_LINK_AUTO; + break; + } + + if (duplex == DUPLEX_FULL) + reg |= QCA8K_PORT_STATUS_DUPLEX; + + if (rx_pause || dsa_is_cpu_port(ds, port)) + reg |= QCA8K_PORT_STATUS_RXFLOW; + + if (tx_pause || dsa_is_cpu_port(ds, port)) + reg |= QCA8K_PORT_STATUS_TXFLOW; + } + + reg |= QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC; + + qca8k_write(priv, QCA8K_REG_PORT_STATUS(port), reg); +} + +static struct qca8k_pcs *pcs_to_qca8k_pcs(struct phylink_pcs *pcs) +{ + return container_of(pcs, struct qca8k_pcs, pcs); +} + +static void qca8k_pcs_get_state(struct phylink_pcs *pcs, + struct phylink_link_state *state) +{ + struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv; + int port = pcs_to_qca8k_pcs(pcs)->port; + u32 reg; + int ret; + + ret = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port), ®); + if (ret < 0) { + state->link = false; + return; + } + + state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP); + state->an_complete = state->link; + state->an_enabled = !!(reg & QCA8K_PORT_STATUS_LINK_AUTO); + state->duplex = (reg & QCA8K_PORT_STATUS_DUPLEX) ? DUPLEX_FULL : + DUPLEX_HALF; + + switch (reg & QCA8K_PORT_STATUS_SPEED) { + case QCA8K_PORT_STATUS_SPEED_10: + state->speed = SPEED_10; + break; + case QCA8K_PORT_STATUS_SPEED_100: + state->speed = SPEED_100; + break; + case QCA8K_PORT_STATUS_SPEED_1000: + state->speed = SPEED_1000; + break; + default: + state->speed = SPEED_UNKNOWN; + break; + } + + if (reg & QCA8K_PORT_STATUS_RXFLOW) + state->pause |= MLO_PAUSE_RX; + if (reg & QCA8K_PORT_STATUS_TXFLOW) + state->pause |= MLO_PAUSE_TX; +} + +static int qca8k_pcs_config(struct phylink_pcs *pcs, unsigned int mode, + phy_interface_t interface, + const unsigned long *advertising, + bool permit_pause_to_mac) +{ + struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv; + int cpu_port_index, ret, port; + u32 reg, val; + + port = pcs_to_qca8k_pcs(pcs)->port; + switch (port) { + case 0: + reg = QCA8K_REG_PORT0_PAD_CTRL; + cpu_port_index = QCA8K_CPU_PORT0; + break; + + case 6: + reg = QCA8K_REG_PORT6_PAD_CTRL; + cpu_port_index = QCA8K_CPU_PORT6; + break; + + default: + WARN_ON(1); + return -EINVAL; + } + + /* Enable/disable SerDes auto-negotiation as necessary */ + ret = qca8k_read(priv, QCA8K_REG_PWS, &val); + if (ret) + return ret; + if (phylink_autoneg_inband(mode)) + val &= ~QCA8K_PWS_SERDES_AEN_DIS; + else + val |= QCA8K_PWS_SERDES_AEN_DIS; + qca8k_write(priv, QCA8K_REG_PWS, val); + + /* Configure the SGMII parameters */ + ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val); + if (ret) + return ret; + + val |= QCA8K_SGMII_EN_SD; + + if (priv->ports_config.sgmii_enable_pll) + val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | + QCA8K_SGMII_EN_TX; + + if (dsa_is_cpu_port(priv->ds, port)) { + /* CPU port, we're talking to the CPU MAC, be a PHY */ + val &= ~QCA8K_SGMII_MODE_CTRL_MASK; + val |= QCA8K_SGMII_MODE_CTRL_PHY; + } else if (interface == PHY_INTERFACE_MODE_SGMII) { + val &= ~QCA8K_SGMII_MODE_CTRL_MASK; + val |= QCA8K_SGMII_MODE_CTRL_MAC; + } else if (interface == PHY_INTERFACE_MODE_1000BASEX) { + val &= ~QCA8K_SGMII_MODE_CTRL_MASK; + val |= QCA8K_SGMII_MODE_CTRL_BASEX; + } + + qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val); + + /* From original code is reported port instability as SGMII also + * require delay set. Apply advised values here or take them from DT. + */ + if (interface == PHY_INTERFACE_MODE_SGMII) + qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); + /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and + * falling edge is set writing in the PORT0 PAD reg + */ + if (priv->switch_id == QCA8K_ID_QCA8327 || + priv->switch_id == QCA8K_ID_QCA8337) + reg = QCA8K_REG_PORT0_PAD_CTRL; + + val = 0; + + /* SGMII Clock phase configuration */ + if (priv->ports_config.sgmii_rx_clk_falling_edge) + val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE; + + if (priv->ports_config.sgmii_tx_clk_falling_edge) + val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE; + + if (val) + ret = qca8k_rmw(priv, reg, + QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE | + QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE, + val); + + return 0; +} + +static void qca8k_pcs_an_restart(struct phylink_pcs *pcs) +{ +} + +static const struct phylink_pcs_ops qca8k_pcs_ops = { + .pcs_get_state = qca8k_pcs_get_state, + .pcs_config = qca8k_pcs_config, + .pcs_an_restart = qca8k_pcs_an_restart, +}; + +static void qca8k_setup_pcs(struct qca8k_priv *priv, struct qca8k_pcs *qpcs, + int port) +{ + qpcs->pcs.ops = &qca8k_pcs_ops; + + /* We don't have interrupts for link changes, so we need to poll */ + qpcs->pcs.poll = true; + qpcs->priv = priv; + qpcs->port = port; +} + +static void qca8k_mib_autocast_handler(struct dsa_switch *ds, struct sk_buff *skb) +{ + struct qca8k_mib_eth_data *mib_eth_data; + struct qca8k_priv *priv = ds->priv; + const struct qca8k_mib_desc *mib; + struct mib_ethhdr *mib_ethhdr; + int i, mib_len, offset = 0; + u64 *data; + u8 port; + + mib_ethhdr = (struct mib_ethhdr *)skb_mac_header(skb); + mib_eth_data = &priv->mib_eth_data; + + /* The switch autocast every port. Ignore other packet and + * parse only the requested one. + */ + port = FIELD_GET(QCA_HDR_RECV_SOURCE_PORT, ntohs(mib_ethhdr->hdr)); + if (port != mib_eth_data->req_port) + goto exit; + + data = mib_eth_data->data; + + for (i = 0; i < priv->info->mib_count; i++) { + mib = &ar8327_mib[i]; + + /* First 3 mib are present in the skb head */ + if (i < 3) { + data[i] = mib_ethhdr->data[i]; + continue; + } + + mib_len = sizeof(uint32_t); + + /* Some mib are 64 bit wide */ + if (mib->size == 2) + mib_len = sizeof(uint64_t); + + /* Copy the mib value from packet to the */ + memcpy(data + i, skb->data + offset, mib_len); + + /* Set the offset for the next mib */ + offset += mib_len; + } + +exit: + /* Complete on receiving all the mib packet */ + if (refcount_dec_and_test(&mib_eth_data->port_parsed)) + complete(&mib_eth_data->rw_done); +} + +static int +qca8k_get_ethtool_stats_eth(struct dsa_switch *ds, int port, u64 *data) +{ + struct dsa_port *dp = dsa_to_port(ds, port); + struct qca8k_mib_eth_data *mib_eth_data; + struct qca8k_priv *priv = ds->priv; + int ret; + + mib_eth_data = &priv->mib_eth_data; + + mutex_lock(&mib_eth_data->mutex); + + reinit_completion(&mib_eth_data->rw_done); + + mib_eth_data->req_port = dp->index; + mib_eth_data->data = data; + refcount_set(&mib_eth_data->port_parsed, QCA8K_NUM_PORTS); + + mutex_lock(&priv->reg_mutex); + + /* Send mib autocast request */ + ret = regmap_update_bits(priv->regmap, QCA8K_REG_MIB, + QCA8K_MIB_FUNC | QCA8K_MIB_BUSY, + FIELD_PREP(QCA8K_MIB_FUNC, QCA8K_MIB_CAST) | + QCA8K_MIB_BUSY); + + mutex_unlock(&priv->reg_mutex); + + if (ret) + goto exit; + + ret = wait_for_completion_timeout(&mib_eth_data->rw_done, QCA8K_ETHERNET_TIMEOUT); + +exit: + mutex_unlock(&mib_eth_data->mutex); + + return ret; +} + +static u32 qca8k_get_phy_flags(struct dsa_switch *ds, int port) +{ + struct qca8k_priv *priv = ds->priv; + + /* Communicate to the phy internal driver the switch revision. + * Based on the switch revision different values needs to be + * set to the dbg and mmd reg on the phy. + * The first 2 bit are used to communicate the switch revision + * to the phy driver. + */ + if (port > 0 && port < 6) + return priv->switch_revision; + + return 0; +} + +static enum dsa_tag_protocol +qca8k_get_tag_protocol(struct dsa_switch *ds, int port, + enum dsa_tag_protocol mp) +{ + return DSA_TAG_PROTO_QCA; +} + +static void +qca8k_master_change(struct dsa_switch *ds, const struct net_device *master, + bool operational) +{ + struct dsa_port *dp = master->dsa_ptr; + struct qca8k_priv *priv = ds->priv; + + /* Ethernet MIB/MDIO is only supported for CPU port 0 */ + if (dp->index != 0) + return; + + mutex_lock(&priv->mgmt_eth_data.mutex); + mutex_lock(&priv->mib_eth_data.mutex); + + priv->mgmt_master = operational ? (struct net_device *)master : NULL; + + mutex_unlock(&priv->mib_eth_data.mutex); + mutex_unlock(&priv->mgmt_eth_data.mutex); +} + +static int qca8k_connect_tag_protocol(struct dsa_switch *ds, + enum dsa_tag_protocol proto) +{ + struct qca_tagger_data *tagger_data; + + switch (proto) { + case DSA_TAG_PROTO_QCA: + tagger_data = ds->tagger_data; + + tagger_data->rw_reg_ack_handler = qca8k_rw_reg_ack_handler; + tagger_data->mib_autocast_handler = qca8k_mib_autocast_handler; + + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int +qca8k_setup(struct dsa_switch *ds) +{ + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; + int cpu_port, ret, i; + u32 mask; + + cpu_port = qca8k_find_cpu_port(ds); + if (cpu_port < 0) { + dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6"); + return cpu_port; + } + + /* Parse CPU port config to be later used in phy_link mac_config */ + ret = qca8k_parse_port_config(priv); + if (ret) + return ret; + + ret = qca8k_setup_mdio_bus(priv); + if (ret) + return ret; + + ret = qca8k_setup_of_pws_reg(priv); + if (ret) + return ret; + + ret = qca8k_setup_mac_pwr_sel(priv); + if (ret) + return ret; + + qca8k_setup_pcs(priv, &priv->pcs_port_0, 0); + qca8k_setup_pcs(priv, &priv->pcs_port_6, 6); + + /* Make sure MAC06 is disabled */ + ret = regmap_clear_bits(priv->regmap, QCA8K_REG_PORT0_PAD_CTRL, + QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN); + if (ret) { + dev_err(priv->dev, "failed disabling MAC06 exchange"); + return ret; + } + + /* Enable CPU Port */ + ret = regmap_set_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0, + QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); + if (ret) { + dev_err(priv->dev, "failed enabling CPU port"); + return ret; + } + + /* Enable MIB counters */ + ret = qca8k_mib_init(priv); + if (ret) + dev_warn(priv->dev, "mib init failed"); + + /* Initial setup of all ports */ + for (i = 0; i < QCA8K_NUM_PORTS; i++) { + /* Disable forwarding by default on all ports */ + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), + QCA8K_PORT_LOOKUP_MEMBER, 0); + if (ret) + return ret; + + /* Enable QCA header mode on all cpu ports */ + if (dsa_is_cpu_port(ds, i)) { + ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i), + FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) | + FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL)); + if (ret) { + dev_err(priv->dev, "failed enabling QCA header mode"); + return ret; + } + } + + /* Disable MAC by default on all user ports */ + if (dsa_is_user_port(ds, i)) + qca8k_port_set_status(priv, i, 0); + } + + /* Forward all unknown frames to CPU port for Linux processing + * Notice that in multi-cpu config only one port should be set + * for igmp, unknown, multicast and broadcast packet + */ + ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, + FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, BIT(cpu_port)) | + FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, BIT(cpu_port)) | + FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, BIT(cpu_port)) | + FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, BIT(cpu_port))); + if (ret) + return ret; + + /* Setup connection between CPU port & user ports + * Configure specific switch configuration for ports + */ + for (i = 0; i < QCA8K_NUM_PORTS; i++) { + /* CPU port gets connected to all user ports of the switch */ + if (dsa_is_cpu_port(ds, i)) { + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), + QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); + if (ret) + return ret; + } + + /* Individual user ports get connected to CPU port only */ + if (dsa_is_user_port(ds, i)) { + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), + QCA8K_PORT_LOOKUP_MEMBER, + BIT(cpu_port)); + if (ret) + return ret; + + /* Enable ARP Auto-learning by default */ + ret = regmap_set_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i), + QCA8K_PORT_LOOKUP_LEARN); + if (ret) + return ret; + + /* For port based vlans to work we need to set the + * default egress vid + */ + ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i), + QCA8K_EGREES_VLAN_PORT_MASK(i), + QCA8K_EGREES_VLAN_PORT(i, QCA8K_PORT_VID_DEF)); + if (ret) + return ret; + + ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i), + QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) | + QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF)); + if (ret) + return ret; + } + + /* The port 5 of the qca8337 have some problem in flood condition. The + * original legacy driver had some specific buffer and priority settings + * for the different port suggested by the QCA switch team. Add this + * missing settings to improve switch stability under load condition. + * This problem is limited to qca8337 and other qca8k switch are not affected. + */ + if (priv->switch_id == QCA8K_ID_QCA8337) { + switch (i) { + /* The 2 CPU port and port 5 requires some different + * priority than any other ports. + */ + case 0: + case 5: + case 6: + mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) | + QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) | + QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) | + QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) | + QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) | + QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) | + QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e); + break; + default: + mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) | + QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) | + QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) | + QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) | + QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19); + } + qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask); + + mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) | + QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN | + QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN | + QCA8K_PORT_HOL_CTRL1_WRED_EN; + qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i), + QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK | + QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN | + QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN | + QCA8K_PORT_HOL_CTRL1_WRED_EN, + mask); + } + } + + /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */ + if (priv->switch_id == QCA8K_ID_QCA8327) { + mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) | + QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496); + qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH, + QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK | + QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK, + mask); + } + + /* Setup our port MTUs to match power on defaults */ + ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN); + if (ret) + dev_warn(priv->dev, "failed setting MTU settings"); + + /* Flush the FDB table */ + qca8k_fdb_flush(priv); + + /* Set min a max ageing value supported */ + ds->ageing_time_min = 7000; + ds->ageing_time_max = 458745000; + + /* Set max number of LAGs supported */ + ds->num_lag_ids = QCA8K_NUM_LAGS; + + return 0; +} + +static const struct dsa_switch_ops qca8k_switch_ops = { + .get_tag_protocol = qca8k_get_tag_protocol, + .setup = qca8k_setup, + .get_strings = qca8k_get_strings, + .get_ethtool_stats = qca8k_get_ethtool_stats, + .get_sset_count = qca8k_get_sset_count, + .set_ageing_time = qca8k_set_ageing_time, + .get_mac_eee = qca8k_get_mac_eee, + .set_mac_eee = qca8k_set_mac_eee, + .port_enable = qca8k_port_enable, + .port_disable = qca8k_port_disable, + .port_change_mtu = qca8k_port_change_mtu, + .port_max_mtu = qca8k_port_max_mtu, + .port_stp_state_set = qca8k_port_stp_state_set, + .port_bridge_join = qca8k_port_bridge_join, + .port_bridge_leave = qca8k_port_bridge_leave, + .port_fast_age = qca8k_port_fast_age, + .port_fdb_add = qca8k_port_fdb_add, + .port_fdb_del = qca8k_port_fdb_del, + .port_fdb_dump = qca8k_port_fdb_dump, + .port_mdb_add = qca8k_port_mdb_add, + .port_mdb_del = qca8k_port_mdb_del, + .port_mirror_add = qca8k_port_mirror_add, + .port_mirror_del = qca8k_port_mirror_del, + .port_vlan_filtering = qca8k_port_vlan_filtering, + .port_vlan_add = qca8k_port_vlan_add, + .port_vlan_del = qca8k_port_vlan_del, + .phylink_get_caps = qca8k_phylink_get_caps, + .phylink_mac_select_pcs = qca8k_phylink_mac_select_pcs, + .phylink_mac_config = qca8k_phylink_mac_config, + .phylink_mac_link_down = qca8k_phylink_mac_link_down, + .phylink_mac_link_up = qca8k_phylink_mac_link_up, + .get_phy_flags = qca8k_get_phy_flags, + .port_lag_join = qca8k_port_lag_join, + .port_lag_leave = qca8k_port_lag_leave, + .master_state_change = qca8k_master_change, + .connect_tag_protocol = qca8k_connect_tag_protocol, +}; + +static int +qca8k_sw_probe(struct mdio_device *mdiodev) +{ + struct qca8k_priv *priv; + int ret; + + /* allocate the private data struct so that we can probe the switches + * ID register + */ + priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->info = of_device_get_match_data(priv->dev); + priv->bus = mdiodev->bus; + priv->dev = &mdiodev->dev; + + priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset", + GPIOD_ASIS); + if (IS_ERR(priv->reset_gpio)) + return PTR_ERR(priv->reset_gpio); + + if (priv->reset_gpio) { + gpiod_set_value_cansleep(priv->reset_gpio, 1); + /* The active low duration must be greater than 10 ms + * and checkpatch.pl wants 20 ms. + */ + msleep(20); + gpiod_set_value_cansleep(priv->reset_gpio, 0); + } + + /* Start by setting up the register mapping */ + priv->regmap = devm_regmap_init(&mdiodev->dev, NULL, priv, + &qca8k_regmap_config); + if (IS_ERR(priv->regmap)) { + dev_err(priv->dev, "regmap initialization failed"); + return PTR_ERR(priv->regmap); + } + + priv->mdio_cache.page = 0xffff; + priv->mdio_cache.lo = 0xffff; + priv->mdio_cache.hi = 0xffff; + + /* Check the detected switch id */ + ret = qca8k_read_switch_id(priv); + if (ret) + return ret; + + priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL); + if (!priv->ds) + return -ENOMEM; + + mutex_init(&priv->mgmt_eth_data.mutex); + init_completion(&priv->mgmt_eth_data.rw_done); + + mutex_init(&priv->mib_eth_data.mutex); + init_completion(&priv->mib_eth_data.rw_done); + + priv->ds->dev = &mdiodev->dev; + priv->ds->num_ports = QCA8K_NUM_PORTS; + priv->ds->priv = priv; + priv->ds->ops = &qca8k_switch_ops; + mutex_init(&priv->reg_mutex); + dev_set_drvdata(&mdiodev->dev, priv); + + return dsa_register_switch(priv->ds); +} + +static void +qca8k_sw_remove(struct mdio_device *mdiodev) +{ + struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev); + int i; + + if (!priv) + return; + + for (i = 0; i < QCA8K_NUM_PORTS; i++) + qca8k_port_set_status(priv, i, 0); + + dsa_unregister_switch(priv->ds); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void qca8k_sw_shutdown(struct mdio_device *mdiodev) +{ + struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +#ifdef CONFIG_PM_SLEEP +static void +qca8k_set_pm(struct qca8k_priv *priv, int enable) +{ + int port; + + for (port = 0; port < QCA8K_NUM_PORTS; port++) { + /* Do not enable on resume if the port was + * disabled before. + */ + if (!(priv->port_enabled_map & BIT(port))) + continue; + + qca8k_port_set_status(priv, port, enable); + } +} + +static int qca8k_suspend(struct device *dev) +{ + struct qca8k_priv *priv = dev_get_drvdata(dev); + + qca8k_set_pm(priv, 0); + + return dsa_switch_suspend(priv->ds); +} + +static int qca8k_resume(struct device *dev) +{ + struct qca8k_priv *priv = dev_get_drvdata(dev); + + qca8k_set_pm(priv, 1); + + return dsa_switch_resume(priv->ds); +} +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(qca8k_pm_ops, + qca8k_suspend, qca8k_resume); + +static const struct qca8k_info_ops qca8xxx_ops = { + .autocast_mib = qca8k_get_ethtool_stats_eth, + .read_eth = qca8k_read_eth, + .write_eth = qca8k_write_eth, +}; + +static const struct qca8k_match_data qca8327 = { + .id = QCA8K_ID_QCA8327, + .reduced_package = true, + .mib_count = QCA8K_QCA832X_MIB_COUNT, + .ops = &qca8xxx_ops, +}; + +static const struct qca8k_match_data qca8328 = { + .id = QCA8K_ID_QCA8327, + .mib_count = QCA8K_QCA832X_MIB_COUNT, + .ops = &qca8xxx_ops, +}; + +static const struct qca8k_match_data qca833x = { + .id = QCA8K_ID_QCA8337, + .mib_count = QCA8K_QCA833X_MIB_COUNT, + .ops = &qca8xxx_ops, +}; + +static const struct of_device_id qca8k_of_match[] = { + { .compatible = "qca,qca8327", .data = &qca8327 }, + { .compatible = "qca,qca8328", .data = &qca8328 }, + { .compatible = "qca,qca8334", .data = &qca833x }, + { .compatible = "qca,qca8337", .data = &qca833x }, + { /* sentinel */ }, +}; + +static struct mdio_driver qca8kmdio_driver = { + .probe = qca8k_sw_probe, + .remove = qca8k_sw_remove, + .shutdown = qca8k_sw_shutdown, + .mdiodrv.driver = { + .name = "qca8k", + .of_match_table = qca8k_of_match, + .pm = &qca8k_pm_ops, + }, +}; + +mdio_module_driver(qca8kmdio_driver); + +MODULE_AUTHOR("Mathieu Olivari, John Crispin <john@phrozen.org>"); +MODULE_DESCRIPTION("Driver for QCA8K ethernet switch family"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:qca8k"); |