diff options
Diffstat (limited to 'drivers/net/dsa/qca8k.c')
-rw-r--r-- | drivers/net/dsa/qca8k.c | 145 |
1 files changed, 53 insertions, 92 deletions
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index d3ed0a7f8077..2727d3169c25 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -1287,87 +1287,71 @@ qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum) if (ret >= 0) return ret; - return qca8k_mdio_read(priv, phy, regnum); + ret = qca8k_mdio_read(priv, phy, regnum); + + if (ret < 0) + return 0xffff; + + return ret; } static int -qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data) +qca8k_legacy_mdio_write(struct mii_bus *slave_bus, int port, int regnum, u16 data) { - struct qca8k_priv *priv = ds->priv; - int ret; + port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; - /* Check if the legacy mapping should be used and the - * port is not correctly mapped to the right PHY in the - * devicetree - */ - if (priv->legacy_phy_port_mapping) - port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; - - /* Use mdio Ethernet when available, fallback to legacy one on error */ - ret = qca8k_phy_eth_command(priv, false, port, regnum, 0); - if (!ret) - return ret; - - return qca8k_mdio_write(priv, port, regnum, data); + return qca8k_internal_mdio_write(slave_bus, port, regnum, data); } static int -qca8k_phy_read(struct dsa_switch *ds, int port, int regnum) +qca8k_legacy_mdio_read(struct mii_bus *slave_bus, int port, int regnum) { - struct qca8k_priv *priv = ds->priv; - int ret; + port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; - /* Check if the legacy mapping should be used and the - * port is not correctly mapped to the right PHY in the - * devicetree - */ - if (priv->legacy_phy_port_mapping) - port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; - - /* Use mdio Ethernet when available, fallback to legacy one on error */ - ret = qca8k_phy_eth_command(priv, true, port, regnum, 0); - if (ret >= 0) - return ret; - - ret = qca8k_mdio_read(priv, port, regnum); - - if (ret < 0) - return 0xffff; - - return ret; + return qca8k_internal_mdio_read(slave_bus, port, regnum); } static int -qca8k_mdio_register(struct qca8k_priv *priv, struct device_node *mdio) +qca8k_mdio_register(struct qca8k_priv *priv) { struct dsa_switch *ds = priv->ds; + struct device_node *mdio; struct mii_bus *bus; bus = devm_mdiobus_alloc(ds->dev); - if (!bus) return -ENOMEM; bus->priv = (void *)priv; - bus->name = "qca8k slave mii"; - bus->read = qca8k_internal_mdio_read; - bus->write = qca8k_internal_mdio_write; - snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d", - ds->index); - + snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d.%d", + ds->dst->index, ds->index); bus->parent = ds->dev; bus->phy_mask = ~ds->phys_mii_mask; - ds->slave_mii_bus = bus; - return devm_of_mdiobus_register(priv->dev, bus, mdio); + /* Check if the devicetree declare the port:phy mapping */ + mdio = of_get_child_by_name(priv->dev->of_node, "mdio"); + if (of_device_is_available(mdio)) { + bus->name = "qca8k slave mii"; + bus->read = qca8k_internal_mdio_read; + bus->write = qca8k_internal_mdio_write; + return devm_of_mdiobus_register(priv->dev, bus, mdio); + } + + /* If a mapping can't be found the legacy mapping is used, + * using the qca8k_port_to_phy function + */ + bus->name = "qca8k-legacy slave mii"; + bus->read = qca8k_legacy_mdio_read; + bus->write = qca8k_legacy_mdio_write; + return devm_mdiobus_register(priv->dev, bus); } static int qca8k_setup_mdio_bus(struct qca8k_priv *priv) { u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg; - struct device_node *ports, *port, *mdio; + struct device_node *ports, *port; phy_interface_t mode; int err; @@ -1429,24 +1413,7 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv) QCA8K_MDIO_MASTER_EN); } - /* Check if the devicetree declare the port:phy mapping */ - mdio = of_get_child_by_name(priv->dev->of_node, "mdio"); - if (of_device_is_available(mdio)) { - err = qca8k_mdio_register(priv, mdio); - if (err) - of_node_put(mdio); - - return err; - } - - /* If a mapping can't be found the legacy mapping is used, - * using the qca8k_port_to_phy function - */ - priv->legacy_phy_port_mapping = true; - priv->ops.phy_read = qca8k_phy_read; - priv->ops.phy_write = qca8k_phy_write; - - return 0; + return qca8k_mdio_register(priv); } static int @@ -2346,7 +2313,7 @@ qca8k_port_enable(struct dsa_switch *ds, int port, struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; qca8k_port_set_status(priv, port, 1); - priv->port_sts[port].enabled = 1; + priv->port_enabled_map |= BIT(port); if (dsa_is_user_port(ds, port)) phy_support_asym_pause(phy); @@ -2360,23 +2327,25 @@ qca8k_port_disable(struct dsa_switch *ds, int port) struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; qca8k_port_set_status(priv, port, 0); - priv->port_sts[port].enabled = 0; + priv->port_enabled_map &= ~BIT(port); } static int qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) { struct qca8k_priv *priv = ds->priv; - int i, mtu = 0; - priv->port_mtu[port] = new_mtu; - - for (i = 0; i < QCA8K_NUM_PORTS; i++) - if (priv->port_mtu[i] > mtu) - mtu = priv->port_mtu[i]; + /* We have only have a general MTU setting. + * DSA always set the CPU port's MTU to the largest MTU of the slave + * ports. + * Setting MTU just for the CPU port is sufficient to correctly set a + * value for every port. + */ + if (!dsa_is_cpu_port(ds, port)) + return 0; /* Include L2 header / FCS length */ - return qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, mtu + ETH_HLEN + ETH_FCS_LEN); + return qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, new_mtu + ETH_HLEN + ETH_FCS_LEN); } static int @@ -3033,16 +3002,6 @@ qca8k_setup(struct dsa_switch *ds) QCA8K_PORT_HOL_CTRL1_WRED_EN, mask); } - - /* Set initial MTU for every port. - * We have only have a general MTU setting. So track - * every port and set the max across all port. - * Set per port MTU to 1500 as the MTU change function - * will add the overhead and if its set to 1518 then it - * will apply the overhead again and we will end up with - * MTU of 1536 instead of 1518 - */ - priv->port_mtu[i] = ETH_DATA_LEN; } /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */ @@ -3202,8 +3161,7 @@ qca8k_sw_probe(struct mdio_device *mdiodev) priv->ds->dev = &mdiodev->dev; priv->ds->num_ports = QCA8K_NUM_PORTS; priv->ds->priv = priv; - priv->ops = qca8k_switch_ops; - priv->ds->ops = &priv->ops; + priv->ds->ops = &qca8k_switch_ops; mutex_init(&priv->reg_mutex); dev_set_drvdata(&mdiodev->dev, priv); @@ -3243,13 +3201,16 @@ static void qca8k_sw_shutdown(struct mdio_device *mdiodev) static void qca8k_set_pm(struct qca8k_priv *priv, int enable) { - int i; + int port; - for (i = 0; i < QCA8K_NUM_PORTS; i++) { - if (!priv->port_sts[i].enabled) + for (port = 0; port < QCA8K_NUM_PORTS; port++) { + /* Do not enable on resume if the port was + * disabled before. + */ + if (!(priv->port_enabled_map & BIT(port))) continue; - qca8k_port_set_status(priv, i, enable); + qca8k_port_set_status(priv, port, enable); } } |