summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/sja1105/sja1105_ptp.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/sja1105/sja1105_ptp.c')
-rw-r--r--drivers/net/dsa/sja1105/sja1105_ptp.c393
1 files changed, 393 insertions, 0 deletions
diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.c b/drivers/net/dsa/sja1105/sja1105_ptp.c
new file mode 100644
index 000000000000..d19cfdf681af
--- /dev/null
+++ b/drivers/net/dsa/sja1105/sja1105_ptp.c
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Vladimir Oltean <olteanv@gmail.com>
+ */
+#include "sja1105.h"
+
+/* The adjfine API clamps ppb between [-32,768,000, 32,768,000], and
+ * therefore scaled_ppm between [-2,147,483,648, 2,147,483,647].
+ * Set the maximum supported ppb to a round value smaller than the maximum.
+ *
+ * Percentually speaking, this is a +/- 0.032x adjustment of the
+ * free-running counter (0.968x to 1.032x).
+ */
+#define SJA1105_MAX_ADJ_PPB 32000000
+#define SJA1105_SIZE_PTP_CMD 4
+
+/* Timestamps are in units of 8 ns clock ticks (equivalent to a fixed
+ * 125 MHz clock) so the scale factor (MULT / SHIFT) needs to be 8.
+ * Furthermore, wisely pick SHIFT as 28 bits, which translates
+ * MULT into 2^31 (0x80000000). This is the same value around which
+ * the hardware PTPCLKRATE is centered, so the same ppb conversion
+ * arithmetic can be reused.
+ */
+#define SJA1105_CC_SHIFT 28
+#define SJA1105_CC_MULT (8 << SJA1105_CC_SHIFT)
+
+/* Having 33 bits of cycle counter left until a 64-bit overflow during delta
+ * conversion, we multiply this by the 8 ns counter resolution and arrive at
+ * a comfortable 68.71 second refresh interval until the delta would cause
+ * an integer overflow, in absence of any other readout.
+ * Approximate to 1 minute.
+ */
+#define SJA1105_REFRESH_INTERVAL (HZ * 60)
+
+/* This range is actually +/- SJA1105_MAX_ADJ_PPB
+ * divided by 1000 (ppb -> ppm) and with a 16-bit
+ * "fractional" part (actually fixed point).
+ * |
+ * v
+ * Convert scaled_ppm from the +/- ((10^6) << 16) range
+ * into the +/- (1 << 31) range.
+ *
+ * This forgoes a "ppb" numeric representation (up to NSEC_PER_SEC)
+ * and defines the scaling factor between scaled_ppm and the actual
+ * frequency adjustments (both cycle counter and hardware).
+ *
+ * ptpclkrate = scaled_ppm * 2^31 / (10^6 * 2^16)
+ * simplifies to
+ * ptpclkrate = scaled_ppm * 2^9 / 5^6
+ */
+#define SJA1105_CC_MULT_NUM (1 << 9)
+#define SJA1105_CC_MULT_DEM 15625
+
+#define ptp_to_sja1105(d) container_of((d), struct sja1105_private, ptp_caps)
+#define cc_to_sja1105(d) container_of((d), struct sja1105_private, tstamp_cc)
+#define dw_to_sja1105(d) container_of((d), struct sja1105_private, refresh_work)
+
+struct sja1105_ptp_cmd {
+ u64 resptp; /* reset */
+};
+
+int sja1105_get_ts_info(struct dsa_switch *ds, int port,
+ struct ethtool_ts_info *info)
+{
+ struct sja1105_private *priv = ds->priv;
+
+ /* Called during cleanup */
+ if (!priv->clock)
+ return -ENODEV;
+
+ info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE |
+ SOF_TIMESTAMPING_RX_HARDWARE |
+ SOF_TIMESTAMPING_RAW_HARDWARE;
+ info->tx_types = (1 << HWTSTAMP_TX_OFF) |
+ (1 << HWTSTAMP_TX_ON);
+ info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT);
+ info->phc_index = ptp_clock_index(priv->clock);
+ return 0;
+}
+
+int sja1105et_ptp_cmd(const void *ctx, const void *data)
+{
+ const struct sja1105_ptp_cmd *cmd = data;
+ const struct sja1105_private *priv = ctx;
+ const struct sja1105_regs *regs = priv->info->regs;
+ const int size = SJA1105_SIZE_PTP_CMD;
+ u8 buf[SJA1105_SIZE_PTP_CMD] = {0};
+ /* No need to keep this as part of the structure */
+ u64 valid = 1;
+
+ sja1105_pack(buf, &valid, 31, 31, size);
+ sja1105_pack(buf, &cmd->resptp, 2, 2, size);
+
+ return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->ptp_control,
+ buf, SJA1105_SIZE_PTP_CMD);
+}
+
+int sja1105pqrs_ptp_cmd(const void *ctx, const void *data)
+{
+ const struct sja1105_ptp_cmd *cmd = data;
+ const struct sja1105_private *priv = ctx;
+ const struct sja1105_regs *regs = priv->info->regs;
+ const int size = SJA1105_SIZE_PTP_CMD;
+ u8 buf[SJA1105_SIZE_PTP_CMD] = {0};
+ /* No need to keep this as part of the structure */
+ u64 valid = 1;
+
+ sja1105_pack(buf, &valid, 31, 31, size);
+ sja1105_pack(buf, &cmd->resptp, 3, 3, size);
+
+ return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->ptp_control,
+ buf, SJA1105_SIZE_PTP_CMD);
+}
+
+/* The switch returns partial timestamps (24 bits for SJA1105 E/T, which wrap
+ * around in 0.135 seconds, and 32 bits for P/Q/R/S, wrapping around in 34.35
+ * seconds).
+ *
+ * This receives the RX or TX MAC timestamps, provided by hardware as
+ * the lower bits of the cycle counter, sampled at the time the timestamp was
+ * collected.
+ *
+ * To reconstruct into a full 64-bit-wide timestamp, the cycle counter is
+ * read and the high-order bits are filled in.
+ *
+ * Must be called within one wraparound period of the partial timestamp since
+ * it was generated by the MAC.
+ */
+u64 sja1105_tstamp_reconstruct(struct sja1105_private *priv, u64 now,
+ u64 ts_partial)
+{
+ u64 partial_tstamp_mask = CYCLECOUNTER_MASK(priv->info->ptp_ts_bits);
+ u64 ts_reconstructed;
+
+ ts_reconstructed = (now & ~partial_tstamp_mask) | ts_partial;
+
+ /* Check lower bits of current cycle counter against the timestamp.
+ * If the current cycle counter is lower than the partial timestamp,
+ * then wraparound surely occurred and must be accounted for.
+ */
+ if ((now & partial_tstamp_mask) <= ts_partial)
+ ts_reconstructed -= (partial_tstamp_mask + 1);
+
+ return ts_reconstructed;
+}
+
+/* Reads the SPI interface for an egress timestamp generated by the switch
+ * for frames sent using management routes.
+ *
+ * SJA1105 E/T layout of the 4-byte SPI payload:
+ *
+ * 31 23 15 7 0
+ * | | | | |
+ * +-----+-----+-----+ ^
+ * ^ |
+ * | |
+ * 24-bit timestamp Update bit
+ *
+ *
+ * SJA1105 P/Q/R/S layout of the 8-byte SPI payload:
+ *
+ * 31 23 15 7 0 63 55 47 39 32
+ * | | | | | | | | | |
+ * ^ +-----+-----+-----+-----+
+ * | ^
+ * | |
+ * Update bit 32-bit timestamp
+ *
+ * Notice that the update bit is in the same place.
+ * To have common code for E/T and P/Q/R/S for reading the timestamp,
+ * we need to juggle with the offset and the bit indices.
+ */
+int sja1105_ptpegr_ts_poll(struct sja1105_private *priv, int port, u64 *ts)
+{
+ const struct sja1105_regs *regs = priv->info->regs;
+ int tstamp_bit_start, tstamp_bit_end;
+ int timeout = 10;
+ u8 packed_buf[8];
+ u64 update;
+ int rc;
+
+ do {
+ rc = sja1105_spi_send_packed_buf(priv, SPI_READ,
+ regs->ptpegr_ts[port],
+ packed_buf,
+ priv->info->ptpegr_ts_bytes);
+ if (rc < 0)
+ return rc;
+
+ sja1105_unpack(packed_buf, &update, 0, 0,
+ priv->info->ptpegr_ts_bytes);
+ if (update)
+ break;
+
+ usleep_range(10, 50);
+ } while (--timeout);
+
+ if (!timeout)
+ return -ETIMEDOUT;
+
+ /* Point the end bit to the second 32-bit word on P/Q/R/S,
+ * no-op on E/T.
+ */
+ tstamp_bit_end = (priv->info->ptpegr_ts_bytes - 4) * 8;
+ /* Shift the 24-bit timestamp on E/T to be collected from 31:8.
+ * No-op on P/Q/R/S.
+ */
+ tstamp_bit_end += 32 - priv->info->ptp_ts_bits;
+ tstamp_bit_start = tstamp_bit_end + priv->info->ptp_ts_bits - 1;
+
+ *ts = 0;
+
+ sja1105_unpack(packed_buf, ts, tstamp_bit_start, tstamp_bit_end,
+ priv->info->ptpegr_ts_bytes);
+
+ return 0;
+}
+
+int sja1105_ptp_reset(struct sja1105_private *priv)
+{
+ struct dsa_switch *ds = priv->ds;
+ struct sja1105_ptp_cmd cmd = {0};
+ int rc;
+
+ mutex_lock(&priv->ptp_lock);
+
+ cmd.resptp = 1;
+ dev_dbg(ds->dev, "Resetting PTP clock\n");
+ rc = priv->info->ptp_cmd(priv, &cmd);
+
+ timecounter_init(&priv->tstamp_tc, &priv->tstamp_cc,
+ ktime_to_ns(ktime_get_real()));
+
+ mutex_unlock(&priv->ptp_lock);
+
+ return rc;
+}
+
+static int sja1105_ptp_gettime(struct ptp_clock_info *ptp,
+ struct timespec64 *ts)
+{
+ struct sja1105_private *priv = ptp_to_sja1105(ptp);
+ u64 ns;
+
+ mutex_lock(&priv->ptp_lock);
+ ns = timecounter_read(&priv->tstamp_tc);
+ mutex_unlock(&priv->ptp_lock);
+
+ *ts = ns_to_timespec64(ns);
+
+ return 0;
+}
+
+static int sja1105_ptp_settime(struct ptp_clock_info *ptp,
+ const struct timespec64 *ts)
+{
+ struct sja1105_private *priv = ptp_to_sja1105(ptp);
+ u64 ns = timespec64_to_ns(ts);
+
+ mutex_lock(&priv->ptp_lock);
+ timecounter_init(&priv->tstamp_tc, &priv->tstamp_cc, ns);
+ mutex_unlock(&priv->ptp_lock);
+
+ return 0;
+}
+
+static int sja1105_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
+{
+ struct sja1105_private *priv = ptp_to_sja1105(ptp);
+ s64 clkrate;
+
+ clkrate = (s64)scaled_ppm * SJA1105_CC_MULT_NUM;
+ clkrate = div_s64(clkrate, SJA1105_CC_MULT_DEM);
+
+ mutex_lock(&priv->ptp_lock);
+
+ /* Force a readout to update the timer *before* changing its frequency.
+ *
+ * This way, its corrected time curve can at all times be modeled
+ * as a linear "A * x + B" function, where:
+ *
+ * - B are past frequency adjustments and offset shifts, all
+ * accumulated into the cycle_last variable.
+ *
+ * - A is the new frequency adjustments we're just about to set.
+ *
+ * Reading now makes B accumulate the correct amount of time,
+ * corrected at the old rate, before changing it.
+ *
+ * Hardware timestamps then become simple points on the curve and
+ * are approximated using the above function. This is still better
+ * than letting the switch take the timestamps using the hardware
+ * rate-corrected clock (PTPCLKVAL) - the comparison in this case would
+ * be that we're shifting the ruler at the same time as we're taking
+ * measurements with it.
+ *
+ * The disadvantage is that it's possible to receive timestamps when
+ * a frequency adjustment took place in the near past.
+ * In this case they will be approximated using the new ppb value
+ * instead of a compound function made of two segments (one at the old
+ * and the other at the new rate) - introducing some inaccuracy.
+ */
+ timecounter_read(&priv->tstamp_tc);
+
+ priv->tstamp_cc.mult = SJA1105_CC_MULT + clkrate;
+
+ mutex_unlock(&priv->ptp_lock);
+
+ return 0;
+}
+
+static int sja1105_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+ struct sja1105_private *priv = ptp_to_sja1105(ptp);
+
+ mutex_lock(&priv->ptp_lock);
+ timecounter_adjtime(&priv->tstamp_tc, delta);
+ mutex_unlock(&priv->ptp_lock);
+
+ return 0;
+}
+
+static u64 sja1105_ptptsclk_read(const struct cyclecounter *cc)
+{
+ struct sja1105_private *priv = cc_to_sja1105(cc);
+ const struct sja1105_regs *regs = priv->info->regs;
+ u64 ptptsclk = 0;
+ int rc;
+
+ rc = sja1105_spi_send_int(priv, SPI_READ, regs->ptptsclk,
+ &ptptsclk, 8);
+ if (rc < 0)
+ dev_err_ratelimited(priv->ds->dev,
+ "failed to read ptp cycle counter: %d\n",
+ rc);
+ return ptptsclk;
+}
+
+static void sja1105_ptp_overflow_check(struct work_struct *work)
+{
+ struct delayed_work *dw = to_delayed_work(work);
+ struct sja1105_private *priv = dw_to_sja1105(dw);
+ struct timespec64 ts;
+
+ sja1105_ptp_gettime(&priv->ptp_caps, &ts);
+
+ schedule_delayed_work(&priv->refresh_work, SJA1105_REFRESH_INTERVAL);
+}
+
+static const struct ptp_clock_info sja1105_ptp_caps = {
+ .owner = THIS_MODULE,
+ .name = "SJA1105 PHC",
+ .adjfine = sja1105_ptp_adjfine,
+ .adjtime = sja1105_ptp_adjtime,
+ .gettime64 = sja1105_ptp_gettime,
+ .settime64 = sja1105_ptp_settime,
+ .max_adj = SJA1105_MAX_ADJ_PPB,
+};
+
+int sja1105_ptp_clock_register(struct sja1105_private *priv)
+{
+ struct dsa_switch *ds = priv->ds;
+
+ /* Set up the cycle counter */
+ priv->tstamp_cc = (struct cyclecounter) {
+ .read = sja1105_ptptsclk_read,
+ .mask = CYCLECOUNTER_MASK(64),
+ .shift = SJA1105_CC_SHIFT,
+ .mult = SJA1105_CC_MULT,
+ };
+ mutex_init(&priv->ptp_lock);
+ INIT_DELAYED_WORK(&priv->refresh_work, sja1105_ptp_overflow_check);
+
+ schedule_delayed_work(&priv->refresh_work, SJA1105_REFRESH_INTERVAL);
+
+ priv->ptp_caps = sja1105_ptp_caps;
+
+ priv->clock = ptp_clock_register(&priv->ptp_caps, ds->dev);
+ if (IS_ERR_OR_NULL(priv->clock))
+ return PTR_ERR(priv->clock);
+
+ return sja1105_ptp_reset(priv);
+}
+
+void sja1105_ptp_clock_unregister(struct sja1105_private *priv)
+{
+ if (IS_ERR_OR_NULL(priv->clock))
+ return;
+
+ cancel_delayed_work_sync(&priv->refresh_work);
+ ptp_clock_unregister(priv->clock);
+ priv->clock = NULL;
+}