summaryrefslogtreecommitdiff
path: root/drivers/net/dsa
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa')
-rw-r--r--drivers/net/dsa/b53/b53_common.c4
-rw-r--r--drivers/net/dsa/b53/b53_serdes.c2
-rw-r--r--drivers/net/dsa/bcm_sf2.c2
-rw-r--r--drivers/net/dsa/microchip/ksz8795.c20
-rw-r--r--drivers/net/dsa/microchip/ksz9477.c31
-rw-r--r--drivers/net/dsa/microchip/ksz_common.c17
-rw-r--r--drivers/net/dsa/microchip/ksz_common.h3
-rw-r--r--drivers/net/dsa/mt7530.c9
-rw-r--r--drivers/net/dsa/mv88e6xxx/chip.c2
-rw-r--r--drivers/net/dsa/ocelot/Kconfig2
-rw-r--r--drivers/net/dsa/ocelot/felix.c9
-rw-r--r--drivers/net/dsa/ocelot/felix_vsc9959.c52
-rw-r--r--drivers/net/dsa/ocelot/seville_vsc9953.c22
-rw-r--r--drivers/net/dsa/rtl8366.c20
-rw-r--r--drivers/net/dsa/sja1105/sja1105_main.c2
15 files changed, 136 insertions, 61 deletions
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 6500179c2ca2..e731db900ee0 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1061,7 +1061,7 @@ static void b53_force_port_config(struct b53_device *dev, int port,
switch (speed) {
case 2000:
reg |= PORT_OVERRIDE_SPEED_2000M;
- /* fallthrough */
+ fallthrough;
case SPEED_1000:
reg |= PORT_OVERRIDE_SPEED_1000M;
break;
@@ -1554,6 +1554,8 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
return ret;
switch (ret) {
+ case -ETIMEDOUT:
+ return ret;
case -ENOSPC:
dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
addr, vid);
diff --git a/drivers/net/dsa/b53/b53_serdes.c b/drivers/net/dsa/b53/b53_serdes.c
index 629bf14128a2..5ae3d9783b68 100644
--- a/drivers/net/dsa/b53/b53_serdes.c
+++ b/drivers/net/dsa/b53/b53_serdes.c
@@ -170,7 +170,7 @@ void b53_serdes_phylink_validate(struct b53_device *dev, int port,
switch (lane) {
case 0:
phylink_set(supported, 2500baseX_Full);
- /* fallthrough */
+ fallthrough;
case 1:
phylink_set(supported, 1000baseX_Full);
break;
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index bafddb35f3a9..5ebff986a1ac 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -566,7 +566,7 @@ static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
switch (state->interface) {
case PHY_INTERFACE_MODE_RGMII:
id_mode_dis = 1;
- /* fallthrough */
+ fallthrough;
case PHY_INTERFACE_MODE_RGMII_TXID:
port_mode = EXT_GPHY;
break;
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 8f1d15ea15d9..f5779e152377 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -932,11 +932,19 @@ static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
if (cpu_port) {
+ if (!p->interface && dev->compat_interface) {
+ dev_warn(dev->dev,
+ "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
+ "Please update your device tree.\n",
+ port);
+ p->interface = dev->compat_interface;
+ }
+
/* Configure MII interface for proper network communication. */
ksz_read8(dev, REG_PORT_5_CTRL_6, &data8);
data8 &= ~PORT_INTERFACE_TYPE;
data8 &= ~PORT_GMII_1GPS_MODE;
- switch (dev->interface) {
+ switch (p->interface) {
case PHY_INTERFACE_MODE_MII:
p->phydev.speed = SPEED_100;
break;
@@ -952,11 +960,11 @@ static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
default:
data8 &= ~PORT_RGMII_ID_IN_ENABLE;
data8 &= ~PORT_RGMII_ID_OUT_ENABLE;
- if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
data8 |= PORT_RGMII_ID_IN_ENABLE;
- if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
data8 |= PORT_RGMII_ID_OUT_ENABLE;
data8 |= PORT_GMII_1GPS_MODE;
data8 |= PORT_INTERFACE_RGMII;
@@ -1252,7 +1260,7 @@ static int ksz8795_switch_init(struct ksz_device *dev)
}
/* set the real number of ports */
- dev->ds->num_ports = dev->port_cnt;
+ dev->ds->num_ports = dev->port_cnt + 1;
return 0;
}
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index dc999406ce86..2f5506ac7d19 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1083,7 +1083,7 @@ static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port)
interface = PHY_INTERFACE_MODE_GMII;
if (gbit)
break;
- /* fall through */
+ fallthrough;
case 0:
interface = PHY_INTERFACE_MODE_MII;
break;
@@ -1208,7 +1208,7 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
/* configure MAC to 1G & RGMII mode */
ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
- switch (dev->interface) {
+ switch (p->interface) {
case PHY_INTERFACE_MODE_MII:
ksz9477_set_xmii(dev, 0, &data8);
ksz9477_set_gbit(dev, false, &data8);
@@ -1229,11 +1229,11 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
ksz9477_set_gbit(dev, true, &data8);
data8 &= ~PORT_RGMII_ID_IG_ENABLE;
data8 &= ~PORT_RGMII_ID_EG_ENABLE;
- if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
data8 |= PORT_RGMII_ID_IG_ENABLE;
- if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
data8 |= PORT_RGMII_ID_EG_ENABLE;
p->phydev.speed = SPEED_1000;
break;
@@ -1269,23 +1269,32 @@ static void ksz9477_config_cpu_port(struct dsa_switch *ds)
dev->cpu_port = i;
dev->host_mask = (1 << dev->cpu_port);
dev->port_mask |= dev->host_mask;
+ p = &dev->ports[i];
/* Read from XMII register to determine host port
* interface. If set specifically in device tree
* note the difference to help debugging.
*/
interface = ksz9477_get_interface(dev, i);
- if (!dev->interface)
- dev->interface = interface;
- if (interface && interface != dev->interface)
+ if (!p->interface) {
+ if (dev->compat_interface) {
+ dev_warn(dev->dev,
+ "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
+ "Please update your device tree.\n",
+ i);
+ p->interface = dev->compat_interface;
+ } else {
+ p->interface = interface;
+ }
+ }
+ if (interface && interface != p->interface)
dev_info(dev->dev,
"use %s instead of %s\n",
- phy_modes(dev->interface),
+ phy_modes(p->interface),
phy_modes(interface));
/* enable cpu port */
ksz9477_port_setup(dev, i, true);
- p = &dev->ports[dev->cpu_port];
p->vid_member = dev->port_mask;
p->on = 1;
}
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 8d53b12d40a8..c796d42730ba 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -387,7 +387,9 @@ EXPORT_SYMBOL(ksz_switch_alloc);
int ksz_switch_register(struct ksz_device *dev,
const struct ksz_dev_ops *ops)
{
+ struct device_node *port, *ports;
phy_interface_t interface;
+ unsigned int port_num;
int ret;
if (dev->pdata)
@@ -421,10 +423,23 @@ int ksz_switch_register(struct ksz_device *dev,
/* Host port interface will be self detected, or specifically set in
* device tree.
*/
+ for (port_num = 0; port_num < dev->port_cnt; ++port_num)
+ dev->ports[port_num].interface = PHY_INTERFACE_MODE_NA;
if (dev->dev->of_node) {
ret = of_get_phy_mode(dev->dev->of_node, &interface);
if (ret == 0)
- dev->interface = interface;
+ dev->compat_interface = interface;
+ ports = of_get_child_by_name(dev->dev->of_node, "ports");
+ if (ports)
+ for_each_available_child_of_node(ports, port) {
+ if (of_property_read_u32(port, "reg",
+ &port_num))
+ continue;
+ if (port_num >= dev->port_cnt)
+ return -EINVAL;
+ of_get_phy_mode(port,
+ &dev->ports[port_num].interface);
+ }
dev->synclko_125 = of_property_read_bool(dev->dev->of_node,
"microchip,synclko-125");
}
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 206838160f49..cf866e48ff66 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -39,6 +39,7 @@ struct ksz_port {
u32 freeze:1; /* MIB counter freeze is enabled */
struct ksz_port_mib mib;
+ phy_interface_t interface;
};
struct ksz_device {
@@ -72,7 +73,7 @@ struct ksz_device {
int mib_cnt;
int mib_port_cnt;
int last_port; /* ports after that not used */
- phy_interface_t interface;
+ phy_interface_t compat_interface;
u32 regs_size;
bool phy_errata_9477;
bool synclko_125;
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8dcb8a49ab67..1aaf47a0da2b 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -566,7 +566,7 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
case P5_INTF_SEL_PHY_P0:
/* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */
val |= MHWTRAP_PHY0_SEL;
- /* fall through */
+ fallthrough;
case P5_INTF_SEL_PHY_P4:
/* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */
val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
@@ -1326,14 +1326,17 @@ mt7530_setup(struct dsa_switch *ds)
if (phy_node->parent == priv->dev->of_node->parent) {
ret = of_get_phy_mode(mac_np, &interface);
- if (ret && ret != -ENODEV)
+ if (ret && ret != -ENODEV) {
+ of_node_put(mac_np);
return ret;
+ }
id = of_mdio_parse_addr(ds->dev, phy_node);
if (id == 0)
priv->p5_intf_sel = P5_INTF_SEL_PHY_P0;
if (id == 4)
priv->p5_intf_sel = P5_INTF_SEL_PHY_P4;
}
+ of_node_put(mac_np);
of_node_put(phy_node);
break;
}
@@ -1501,7 +1504,7 @@ unsupported:
phylink_set(mask, 100baseT_Full);
if (state->interface != PHY_INTERFACE_MODE_MII) {
- phylink_set(mask, 1000baseT_Half);
+ /* This switch only supports 1G full-duplex. */
phylink_set(mask, 1000baseT_Full);
if (port == 5)
phylink_set(mask, 1000baseX_Full);
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 7a71c9902e73..f0dbc05e30a4 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -875,7 +875,7 @@ static uint64_t _mv88e6xxx_get_ethtool_stat(struct mv88e6xxx_chip *chip,
break;
case STATS_TYPE_BANK1:
reg = bank1_select;
- /* fall through */
+ fallthrough;
case STATS_TYPE_BANK0:
reg |= s->reg | histogram;
mv88e6xxx_g1_stats_read(chip, reg, &low);
diff --git a/drivers/net/dsa/ocelot/Kconfig b/drivers/net/dsa/ocelot/Kconfig
index f121619d81fe..2d23ccef7d0e 100644
--- a/drivers/net/dsa/ocelot/Kconfig
+++ b/drivers/net/dsa/ocelot/Kconfig
@@ -9,7 +9,7 @@ config NET_DSA_MSCC_FELIX
select NET_DSA_TAG_OCELOT
select FSL_ENETC_MDIO
help
- This driver supports network switches from the the Vitesse /
+ This driver supports network switches from the Vitesse /
Microsemi / Microchip Ocelot family of switching cores that are
connected to their host CPU via Ethernet.
The following switches are supported:
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index c69d9592a2b7..01427cd08448 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -400,6 +400,7 @@ static int felix_parse_ports_node(struct felix *felix,
if (err < 0) {
dev_err(dev, "Unsupported PHY mode %s on port %d\n",
phy_modes(phy_mode), port);
+ of_node_put(child);
return err;
}
@@ -584,7 +585,10 @@ static int felix_setup(struct dsa_switch *ds)
if (err)
return err;
- ocelot_init(ocelot);
+ err = ocelot_init(ocelot);
+ if (err)
+ return err;
+
if (ocelot->ptp) {
err = ocelot_init_timestamp(ocelot, &ocelot_ptp_clock_info);
if (err) {
@@ -639,10 +643,13 @@ static void felix_teardown(struct dsa_switch *ds)
{
struct ocelot *ocelot = ds->priv;
struct felix *felix = ocelot_to_felix(ocelot);
+ int port;
if (felix->info->mdio_bus_free)
felix->info->mdio_bus_free(ocelot);
+ for (port = 0; port < ocelot->num_phys_ports; port++)
+ ocelot_deinit_port(ocelot, port);
ocelot_deinit_timestamp(ocelot);
/* stop workqueue thread */
ocelot_deinit(ocelot);
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 9b720c8ddfc3..3a9637496407 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -645,17 +645,17 @@ static struct vcap_field vsc9959_vcap_is2_keys[] = {
[VCAP_IS2_HK_DIP_EQ_SIP] = {118, 1},
/* IP4_TCP_UDP (TYPE=100) */
[VCAP_IS2_HK_TCP] = {119, 1},
- [VCAP_IS2_HK_L4_SPORT] = {120, 16},
- [VCAP_IS2_HK_L4_DPORT] = {136, 16},
+ [VCAP_IS2_HK_L4_DPORT] = {120, 16},
+ [VCAP_IS2_HK_L4_SPORT] = {136, 16},
[VCAP_IS2_HK_L4_RNG] = {152, 8},
[VCAP_IS2_HK_L4_SPORT_EQ_DPORT] = {160, 1},
[VCAP_IS2_HK_L4_SEQUENCE_EQ0] = {161, 1},
- [VCAP_IS2_HK_L4_URG] = {162, 1},
- [VCAP_IS2_HK_L4_ACK] = {163, 1},
- [VCAP_IS2_HK_L4_PSH] = {164, 1},
- [VCAP_IS2_HK_L4_RST] = {165, 1},
- [VCAP_IS2_HK_L4_SYN] = {166, 1},
- [VCAP_IS2_HK_L4_FIN] = {167, 1},
+ [VCAP_IS2_HK_L4_FIN] = {162, 1},
+ [VCAP_IS2_HK_L4_SYN] = {163, 1},
+ [VCAP_IS2_HK_L4_RST] = {164, 1},
+ [VCAP_IS2_HK_L4_PSH] = {165, 1},
+ [VCAP_IS2_HK_L4_ACK] = {166, 1},
+ [VCAP_IS2_HK_L4_URG] = {167, 1},
[VCAP_IS2_HK_L4_1588_DOM] = {168, 8},
[VCAP_IS2_HK_L4_1588_VER] = {176, 4},
/* IP4_OTHER (TYPE=101) */
@@ -685,12 +685,12 @@ static struct vcap_field vsc9959_vcap_is2_actions[] = {
[VCAP_IS2_ACT_POLICE_ENA] = { 9, 1},
[VCAP_IS2_ACT_POLICE_IDX] = { 10, 9},
[VCAP_IS2_ACT_POLICE_VCAP_ONLY] = { 19, 1},
- [VCAP_IS2_ACT_PORT_MASK] = { 20, 11},
- [VCAP_IS2_ACT_REW_OP] = { 31, 9},
- [VCAP_IS2_ACT_SMAC_REPLACE_ENA] = { 40, 1},
- [VCAP_IS2_ACT_RSV] = { 41, 2},
- [VCAP_IS2_ACT_ACL_ID] = { 43, 6},
- [VCAP_IS2_ACT_HIT_CNT] = { 49, 32},
+ [VCAP_IS2_ACT_PORT_MASK] = { 20, 6},
+ [VCAP_IS2_ACT_REW_OP] = { 26, 9},
+ [VCAP_IS2_ACT_SMAC_REPLACE_ENA] = { 35, 1},
+ [VCAP_IS2_ACT_RSV] = { 36, 2},
+ [VCAP_IS2_ACT_ACL_ID] = { 38, 6},
+ [VCAP_IS2_ACT_HIT_CNT] = { 44, 32},
};
static const struct vcap_props vsc9959_vcap_props[] = {
@@ -1171,6 +1171,8 @@ static int vsc9959_prevalidate_phy_mode(struct ocelot *ocelot, int port,
*/
static u16 vsc9959_wm_enc(u16 value)
{
+ WARN_ON(value >= 16 * BIT(8));
+
if (value >= BIT(8))
return BIT(8) | (value / 16);
@@ -1284,8 +1286,28 @@ void vsc9959_mdio_bus_free(struct ocelot *ocelot)
static void vsc9959_sched_speed_set(struct ocelot *ocelot, int port,
u32 speed)
{
+ u8 tas_speed;
+
+ switch (speed) {
+ case SPEED_10:
+ tas_speed = OCELOT_SPEED_10;
+ break;
+ case SPEED_100:
+ tas_speed = OCELOT_SPEED_100;
+ break;
+ case SPEED_1000:
+ tas_speed = OCELOT_SPEED_1000;
+ break;
+ case SPEED_2500:
+ tas_speed = OCELOT_SPEED_2500;
+ break;
+ default:
+ tas_speed = OCELOT_SPEED_1000;
+ break;
+ }
+
ocelot_rmw_rix(ocelot,
- QSYS_TAG_CONFIG_LINK_SPEED(speed),
+ QSYS_TAG_CONFIG_LINK_SPEED(tas_speed),
QSYS_TAG_CONFIG_LINK_SPEED_M,
QSYS_TAG_CONFIG, port);
}
diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
index 625b1891d955..9e9fd19e1d00 100644
--- a/drivers/net/dsa/ocelot/seville_vsc9953.c
+++ b/drivers/net/dsa/ocelot/seville_vsc9953.c
@@ -659,17 +659,17 @@ static struct vcap_field vsc9953_vcap_is2_keys[] = {
[VCAP_IS2_HK_DIP_EQ_SIP] = {122, 1},
/* IP4_TCP_UDP (TYPE=100) */
[VCAP_IS2_HK_TCP] = {123, 1},
- [VCAP_IS2_HK_L4_SPORT] = {124, 16},
- [VCAP_IS2_HK_L4_DPORT] = {140, 16},
+ [VCAP_IS2_HK_L4_DPORT] = {124, 16},
+ [VCAP_IS2_HK_L4_SPORT] = {140, 16},
[VCAP_IS2_HK_L4_RNG] = {156, 8},
[VCAP_IS2_HK_L4_SPORT_EQ_DPORT] = {164, 1},
[VCAP_IS2_HK_L4_SEQUENCE_EQ0] = {165, 1},
- [VCAP_IS2_HK_L4_URG] = {166, 1},
- [VCAP_IS2_HK_L4_ACK] = {167, 1},
- [VCAP_IS2_HK_L4_PSH] = {168, 1},
- [VCAP_IS2_HK_L4_RST] = {169, 1},
- [VCAP_IS2_HK_L4_SYN] = {170, 1},
- [VCAP_IS2_HK_L4_FIN] = {171, 1},
+ [VCAP_IS2_HK_L4_FIN] = {166, 1},
+ [VCAP_IS2_HK_L4_SYN] = {167, 1},
+ [VCAP_IS2_HK_L4_RST] = {168, 1},
+ [VCAP_IS2_HK_L4_PSH] = {169, 1},
+ [VCAP_IS2_HK_L4_ACK] = {170, 1},
+ [VCAP_IS2_HK_L4_URG] = {171, 1},
/* IP4_OTHER (TYPE=101) */
[VCAP_IS2_HK_IP4_L3_PROTO] = {123, 8},
[VCAP_IS2_HK_L3_PAYLOAD] = {131, 56},
@@ -706,7 +706,7 @@ static const struct vcap_props vsc9953_vcap_props[] = {
.action_type_width = 1,
.action_table = {
[IS2_ACTION_TYPE_NORMAL] = {
- .width = 44,
+ .width = 50, /* HIT_CNT not included */
.count = 2
},
[IS2_ACTION_TYPE_SMAC_SIP] = {
@@ -911,6 +911,8 @@ static int vsc9953_prevalidate_phy_mode(struct ocelot *ocelot, int port,
*/
static u16 vsc9953_wm_enc(u16 value)
{
+ WARN_ON(value >= 16 * BIT(9));
+
if (value >= BIT(9))
return BIT(9) | (value / 16);
@@ -1008,7 +1010,7 @@ static const struct felix_info seville_info_vsc9953 = {
.vcap_is2_keys = vsc9953_vcap_is2_keys,
.vcap_is2_actions = vsc9953_vcap_is2_actions,
.vcap = vsc9953_vcap_props,
- .shared_queue_sz = 128 * 1024,
+ .shared_queue_sz = 2048 * 1024,
.num_mact_rows = 2048,
.num_ports = 10,
.mdio_bus_alloc = vsc9953_mdio_bus_alloc,
diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index 8f40fbf70a82..a8c5a934c3d3 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -452,13 +452,19 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port,
return ret;
if (vid == vlanmc.vid) {
- /* clear VLAN member configurations */
- vlanmc.vid = 0;
- vlanmc.priority = 0;
- vlanmc.member = 0;
- vlanmc.untag = 0;
- vlanmc.fid = 0;
-
+ /* Remove this port from the VLAN */
+ vlanmc.member &= ~BIT(port);
+ vlanmc.untag &= ~BIT(port);
+ /*
+ * If no ports are members of this VLAN
+ * anymore then clear the whole member
+ * config so it can be reused.
+ */
+ if (!vlanmc.member && vlanmc.untag) {
+ vlanmc.vid = 0;
+ vlanmc.priority = 0;
+ vlanmc.fid = 0;
+ }
ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
if (ret) {
dev_err(smi->dev,
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index c3f6f124e5f0..5a28dfb36ec3 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -3415,7 +3415,7 @@ static int sja1105_check_device_id(struct sja1105_private *priv)
sja1105_unpack(prod_id, &part_no, 19, 4, SJA1105_SIZE_DEVICE_ID);
- for (match = sja1105_dt_ids; match->compatible; match++) {
+ for (match = sja1105_dt_ids; match->compatible[0]; match++) {
const struct sja1105_info *info = match->data;
/* Is what's been probed in our match table at all? */