summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/3com/3c59x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/3com/3c59x.c')
-rw-r--r--drivers/net/ethernet/3com/3c59x.c29
1 files changed, 15 insertions, 14 deletions
diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
index 8ca49f04acec..41095ebad97f 100644
--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -1310,8 +1310,8 @@ static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
pr_cont(", IRQ %d\n", dev->irq);
/* Tell them about an invalid IRQ. */
if (dev->irq <= 0 || dev->irq >= nr_irqs)
- pr_warning(" *** Warning: IRQ %d is unlikely to work! ***\n",
- dev->irq);
+ pr_warn(" *** Warning: IRQ %d is unlikely to work! ***\n",
+ dev->irq);
step = (window_read8(vp, 4, Wn4_NetDiag) & 0x1e) >> 1;
if (print_info) {
@@ -1425,7 +1425,7 @@ static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
}
mii_preamble_required--;
if (phy_idx == 0) {
- pr_warning(" ***WARNING*** No MII transceivers found!\n");
+ pr_warn(" ***WARNING*** No MII transceivers found!\n");
vp->phys[0] = 24;
} else {
vp->advertising = mdio_read(dev, vp->phys[0], MII_ADVERTISE);
@@ -1566,8 +1566,7 @@ vortex_up(struct net_device *dev)
pci_restore_state(VORTEX_PCI(vp));
err = pci_enable_device(VORTEX_PCI(vp));
if (err) {
- pr_warning("%s: Could not enable device\n",
- dev->name);
+ pr_warn("%s: Could not enable device\n", dev->name);
goto err_out;
}
}
@@ -2007,8 +2006,8 @@ vortex_error(struct net_device *dev, int status)
/* This occurs when we have the wrong media type! */
if (DoneDidThat == 0 &&
ioread16(ioaddr + EL3_STATUS) & StatsFull) {
- pr_warning("%s: Updating statistics failed, disabling "
- "stats as an interrupt source.\n", dev->name);
+ pr_warn("%s: Updating statistics failed, disabling stats as an interrupt source\n",
+ dev->name);
iowrite16(SetIntrEnb |
(window_read16(vp, 5, 10) & ~StatsFull),
ioaddr + EL3_CMD);
@@ -2148,8 +2147,8 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) {
if (vortex_debug > 0)
- pr_warning("%s: BUG! Tx Ring full, refusing to send buffer.\n",
- dev->name);
+ pr_warn("%s: BUG! Tx Ring full, refusing to send buffer\n",
+ dev->name);
netif_stop_queue(dev);
return NETDEV_TX_BUSY;
}
@@ -2214,7 +2213,7 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
}
}
#else
- dma_addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, skb->len, PCI_DMA_TODEVICE));
+ dma_addr = pci_map_single(VORTEX_PCI(vp), skb->data, skb->len, PCI_DMA_TODEVICE);
if (dma_mapping_error(&VORTEX_PCI(vp)->dev, dma_addr))
goto out_dma_err;
vp->tx_ring[entry].addr = cpu_to_le32(dma_addr);
@@ -2343,7 +2342,7 @@ vortex_interrupt(int irq, void *dev_id)
}
if (--work_done < 0) {
- pr_warning("%s: Too much work in interrupt, status %4.4x.\n",
+ pr_warn("%s: Too much work in interrupt, status %4.4x\n",
dev->name, status);
/* Disable all pending interrupts. */
do {
@@ -2476,7 +2475,7 @@ boomerang_interrupt(int irq, void *dev_id)
vortex_error(dev, status);
if (--work_done < 0) {
- pr_warning("%s: Too much work in interrupt, status %4.4x.\n",
+ pr_warn("%s: Too much work in interrupt, status %4.4x\n",
dev->name, status);
/* Disable all pending interrupts. */
do {
@@ -2652,7 +2651,8 @@ boomerang_rx(struct net_device *dev)
if (skb == NULL) {
static unsigned long last_jif;
if (time_after(jiffies, last_jif + 10 * HZ)) {
- pr_warning("%s: memory shortage\n", dev->name);
+ pr_warn("%s: memory shortage\n",
+ dev->name);
last_jif = jiffies;
}
if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE)
@@ -2751,7 +2751,8 @@ vortex_close(struct net_device *dev)
if (vp->rx_csumhits &&
(vp->drv_flags & HAS_HWCKSM) == 0 &&
(vp->card_idx >= MAX_UNITS || hw_checksums[vp->card_idx] == -1)) {
- pr_warning("%s supports hardware checksums, and we're not using them!\n", dev->name);
+ pr_warn("%s supports hardware checksums, and we're not using them!\n",
+ dev->name);
}
#endif