summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/apple/mac89x0.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/apple/mac89x0.c')
-rw-r--r--drivers/net/ethernet/apple/mac89x0.c634
1 files changed, 0 insertions, 634 deletions
diff --git a/drivers/net/ethernet/apple/mac89x0.c b/drivers/net/ethernet/apple/mac89x0.c
deleted file mode 100644
index 83781f316d1f..000000000000
--- a/drivers/net/ethernet/apple/mac89x0.c
+++ /dev/null
@@ -1,634 +0,0 @@
-/* mac89x0.c: A Crystal Semiconductor CS89[02]0 driver for linux. */
-/*
- Written 1996 by Russell Nelson, with reference to skeleton.c
- written 1993-1994 by Donald Becker.
-
- This software may be used and distributed according to the terms
- of the GNU General Public License, incorporated herein by reference.
-
- The author may be reached at nelson@crynwr.com, Crynwr
- Software, 11 Grant St., Potsdam, NY 13676
-
- Changelog:
-
- Mike Cruse : mcruse@cti-ltd.com
- : Changes for Linux 2.0 compatibility.
- : Added dev_id parameter in net_interrupt(),
- : request_irq() and free_irq(). Just NULL for now.
-
- Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros
- : in net_open() and net_close() so kerneld would know
- : that the module is in use and wouldn't eject the
- : driver prematurely.
-
- Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c
- : as an example. Disabled autoprobing in init_module(),
- : not a good thing to do to other devices while Linux
- : is running from all accounts.
-
- Alan Cox : Removed 1.2 support, added 2.1 extra counters.
-
- David Huggins-Daines <dhd@debian.org>
-
- Split this off into mac89x0.c, and gutted it of all parts which are
- not relevant to the existing CS8900 cards on the Macintosh
- (i.e. basically the Daynaport CS and LC cards). To be precise:
-
- * Removed all the media-detection stuff, because these cards are
- TP-only.
-
- * Lobotomized the ISA interrupt bogosity, because these cards use
- a hardwired NuBus interrupt and a magic ISAIRQ value in the card.
-
- * Basically eliminated everything not relevant to getting the
- cards minimally functioning on the Macintosh.
-
- I might add that these cards are badly designed even from the Mac
- standpoint, in that Dayna, in their infinite wisdom, used NuBus slot
- I/O space and NuBus interrupts for these cards, but neglected to
- provide anything even remotely resembling a NuBus ROM. Therefore we
- have to probe for them in a brain-damaged ISA-like fashion.
-
- Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 11/01/2001
- check kmalloc and release the allocated memory on failure in
- mac89x0_probe and in init_module
- use local_irq_{save,restore}(flags) in net_get_stat, not just
- local_irq_{dis,en}able()
-*/
-
-static char *version =
-"cs89x0.c:v1.02 11/26/96 Russell Nelson <nelson@crynwr.com>\n";
-
-/* ======================= configure the driver here ======================= */
-
-/* use 0 for production, 1 for verification, >2 for debug */
-#ifndef NET_DEBUG
-#define NET_DEBUG 0
-#endif
-
-/* ======================= end of configuration ======================= */
-
-
-/* Always include 'config.h' first in case the user wants to turn on
- or override something. */
-#include <linux/module.h>
-
-/*
- Sources:
-
- Crynwr packet driver epktisa.
-
- Crystal Semiconductor data sheets.
-
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/string.h>
-#include <linux/nubus.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-#include <linux/gfp.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/hwtest.h>
-#include <asm/macints.h>
-
-#include "cs89x0.h"
-
-static unsigned int net_debug = NET_DEBUG;
-
-/* Information that need to be kept for each board. */
-struct net_local {
- int chip_type; /* one of: CS8900, CS8920, CS8920M */
- char chip_revision; /* revision letter of the chip ('A'...) */
- int send_cmd; /* the propercommand used to send a packet. */
- int rx_mode;
- int curr_rx_cfg;
- int send_underrun; /* keep track of how many underruns in a row we get */
- struct sk_buff *skb;
-};
-
-/* Index to functions, as function prototypes. */
-
-#if 0
-extern void reset_chip(struct net_device *dev);
-#endif
-static int net_open(struct net_device *dev);
-static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t net_interrupt(int irq, void *dev_id);
-static void set_multicast_list(struct net_device *dev);
-static void net_rx(struct net_device *dev);
-static int net_close(struct net_device *dev);
-static struct net_device_stats *net_get_stats(struct net_device *dev);
-static int set_mac_address(struct net_device *dev, void *addr);
-
-
-/* Example routines you must write ;->. */
-#define tx_done(dev) 1
-
-/* For reading/writing registers ISA-style */
-static inline int
-readreg_io(struct net_device *dev, int portno)
-{
- nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
- return swab16(nubus_readw(dev->base_addr + DATA_PORT));
-}
-
-static inline void
-writereg_io(struct net_device *dev, int portno, int value)
-{
- nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
- nubus_writew(swab16(value), dev->base_addr + DATA_PORT);
-}
-
-/* These are for reading/writing registers in shared memory */
-static inline int
-readreg(struct net_device *dev, int portno)
-{
- return swab16(nubus_readw(dev->mem_start + portno));
-}
-
-static inline void
-writereg(struct net_device *dev, int portno, int value)
-{
- nubus_writew(swab16(value), dev->mem_start + portno);
-}
-
-static const struct net_device_ops mac89x0_netdev_ops = {
- .ndo_open = net_open,
- .ndo_stop = net_close,
- .ndo_start_xmit = net_send_packet,
- .ndo_get_stats = net_get_stats,
- .ndo_set_rx_mode = set_multicast_list,
- .ndo_set_mac_address = set_mac_address,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_change_mtu = eth_change_mtu,
-};
-
-/* Probe for the CS8900 card in slot E. We won't bother looking
- anywhere else until we have a really good reason to do so. */
-struct net_device * __init mac89x0_probe(int unit)
-{
- struct net_device *dev;
- static int once_is_enough;
- struct net_local *lp;
- static unsigned version_printed;
- int i, slot;
- unsigned rev_type = 0;
- unsigned long ioaddr;
- unsigned short sig;
- int err = -ENODEV;
-
- if (!MACH_IS_MAC)
- return ERR_PTR(-ENODEV);
-
- dev = alloc_etherdev(sizeof(struct net_local));
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- if (unit >= 0) {
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
- }
-
- if (once_is_enough)
- goto out;
- once_is_enough = 1;
-
- /* We might have to parameterize this later */
- slot = 0xE;
- /* Get out now if there's a real NuBus card in slot E */
- if (nubus_find_slot(slot, NULL) != NULL)
- goto out;
-
- /* The pseudo-ISA bits always live at offset 0x300 (gee,
- wonder why...) */
- ioaddr = (unsigned long)
- nubus_slot_addr(slot) | (((slot&0xf) << 20) + DEFAULTIOBASE);
- {
- unsigned long flags;
- int card_present;
-
- local_irq_save(flags);
- card_present = (hwreg_present((void*) ioaddr+4) &&
- hwreg_present((void*) ioaddr + DATA_PORT));
- local_irq_restore(flags);
-
- if (!card_present)
- goto out;
- }
-
- nubus_writew(0, ioaddr + ADD_PORT);
- sig = nubus_readw(ioaddr + DATA_PORT);
- if (sig != swab16(CHIP_EISA_ID_SIG))
- goto out;
-
- /* Initialize the net_device structure. */
- lp = netdev_priv(dev);
-
- /* Fill in the 'dev' fields. */
- dev->base_addr = ioaddr;
- dev->mem_start = (unsigned long)
- nubus_slot_addr(slot) | (((slot&0xf) << 20) + MMIOBASE);
- dev->mem_end = dev->mem_start + 0x1000;
-
- /* Turn on shared memory */
- writereg_io(dev, PP_BusCTL, MEMORY_ON);
-
- /* get the chip type */
- rev_type = readreg(dev, PRODUCT_ID_ADD);
- lp->chip_type = rev_type &~ REVISON_BITS;
- lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
-
- /* Check the chip type and revision in order to set the correct send command
- CS8920 revision C and CS8900 revision F can use the faster send. */
- lp->send_cmd = TX_AFTER_381;
- if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
- lp->send_cmd = TX_NOW;
- if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
- lp->send_cmd = TX_NOW;
-
- if (net_debug && version_printed++ == 0)
- printk(version);
-
- printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#8lx",
- dev->name,
- lp->chip_type==CS8900?'0':'2',
- lp->chip_type==CS8920M?"M":"",
- lp->chip_revision,
- dev->base_addr);
-
- /* Try to read the MAC address */
- if ((readreg(dev, PP_SelfST) & (EEPROM_PRESENT | EEPROM_OK)) == 0) {
- printk("\nmac89x0: No EEPROM, giving up now.\n");
- goto out1;
- } else {
- for (i = 0; i < ETH_ALEN; i += 2) {
- /* Big-endian (why??!) */
- unsigned short s = readreg(dev, PP_IA + i);
- dev->dev_addr[i] = s >> 8;
- dev->dev_addr[i+1] = s & 0xff;
- }
- }
-
- dev->irq = SLOT2IRQ(slot);
-
- /* print the IRQ and ethernet address. */
-
- printk(" IRQ %d ADDR %pM\n", dev->irq, dev->dev_addr);
-
- dev->netdev_ops = &mac89x0_netdev_ops;
-
- err = register_netdev(dev);
- if (err)
- goto out1;
- return NULL;
-out1:
- nubus_writew(0, dev->base_addr + ADD_PORT);
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-
-#if 0
-/* This is useful for something, but I don't know what yet. */
-void __init reset_chip(struct net_device *dev)
-{
- int reset_start_time;
-
- writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
-
- /* wait 30 ms */
- msleep_interruptible(30);
-
- /* Wait until the chip is reset */
- reset_start_time = jiffies;
- while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
- ;
-}
-#endif
-
-/* Open/initialize the board. This is called (in the current kernel)
- sometime after booting when the 'ifconfig' program is run.
-
- This routine should set everything up anew at each open, even
- registers that "should" only need to be set once at boot, so that
- there is non-reboot way to recover if something goes wrong.
- */
-static int
-net_open(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- int i;
-
- /* Disable the interrupt for now */
- writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) & ~ENABLE_IRQ);
-
- /* Grab the interrupt */
- if (request_irq(dev->irq, net_interrupt, 0, "cs89x0", dev))
- return -EAGAIN;
-
- /* Set up the IRQ - Apparently magic */
- if (lp->chip_type == CS8900)
- writereg(dev, PP_CS8900_ISAINT, 0);
- else
- writereg(dev, PP_CS8920_ISAINT, 0);
-
- /* set the Ethernet address */
- for (i=0; i < ETH_ALEN/2; i++)
- writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
-
- /* Turn on both receive and transmit operations */
- writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
-
- /* Receive only error free packets addressed to this card */
- lp->rx_mode = 0;
- writereg(dev, PP_RxCTL, DEF_RX_ACCEPT);
-
- lp->curr_rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL;
-
- writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
-
- writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
- TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
-
- writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
- TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
-
- /* now that we've got our act together, enable everything */
- writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) | ENABLE_IRQ);
- netif_start_queue(dev);
- return 0;
-}
-
-static int
-net_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- unsigned long flags;
-
- if (net_debug > 3)
- printk("%s: sent %d byte packet of type %x\n",
- dev->name, skb->len,
- (skb->data[ETH_ALEN+ETH_ALEN] << 8)
- | skb->data[ETH_ALEN+ETH_ALEN+1]);
-
- /* keep the upload from being interrupted, since we
- ask the chip to start transmitting before the
- whole packet has been completely uploaded. */
- local_irq_save(flags);
- netif_stop_queue(dev);
-
- /* initiate a transmit sequence */
- writereg(dev, PP_TxCMD, lp->send_cmd);
- writereg(dev, PP_TxLength, skb->len);
-
- /* Test to see if the chip has allocated memory for the packet */
- if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
- /* Gasp! It hasn't. But that shouldn't happen since
- we're waiting for TxOk, so return 1 and requeue this packet. */
- local_irq_restore(flags);
- return NETDEV_TX_BUSY;
- }
-
- /* Write the contents of the packet */
- skb_copy_from_linear_data(skb, (void *)(dev->mem_start + PP_TxFrame),
- skb->len+1);
-
- local_irq_restore(flags);
- dev_kfree_skb (skb);
-
- return NETDEV_TX_OK;
-}
-
-/* The typical workload of the driver:
- Handle the network interface interrupts. */
-static irqreturn_t net_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct net_local *lp;
- int ioaddr, status;
-
- if (dev == NULL) {
- printk ("net_interrupt(): irq %d for unknown device.\n", irq);
- return IRQ_NONE;
- }
-
- ioaddr = dev->base_addr;
- lp = netdev_priv(dev);
-
- /* we MUST read all the events out of the ISQ, otherwise we'll never
- get interrupted again. As a consequence, we can't have any limit
- on the number of times we loop in the interrupt handler. The
- hardware guarantees that eventually we'll run out of events. Of
- course, if you're on a slow machine, and packets are arriving
- faster than you can read them off, you're screwed. Hasta la
- vista, baby! */
- while ((status = swab16(nubus_readw(dev->base_addr + ISQ_PORT)))) {
- if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
- switch(status & ISQ_EVENT_MASK) {
- case ISQ_RECEIVER_EVENT:
- /* Got a packet(s). */
- net_rx(dev);
- break;
- case ISQ_TRANSMITTER_EVENT:
- dev->stats.tx_packets++;
- netif_wake_queue(dev);
- if ((status & TX_OK) == 0)
- dev->stats.tx_errors++;
- if (status & TX_LOST_CRS)
- dev->stats.tx_carrier_errors++;
- if (status & TX_SQE_ERROR)
- dev->stats.tx_heartbeat_errors++;
- if (status & TX_LATE_COL)
- dev->stats.tx_window_errors++;
- if (status & TX_16_COL)
- dev->stats.tx_aborted_errors++;
- break;
- case ISQ_BUFFER_EVENT:
- if (status & READY_FOR_TX) {
- /* we tried to transmit a packet earlier,
- but inexplicably ran out of buffers.
- That shouldn't happen since we only ever
- load one packet. Shrug. Do the right
- thing anyway. */
- netif_wake_queue(dev);
- }
- if (status & TX_UNDERRUN) {
- if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
- lp->send_underrun++;
- if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
- else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
- }
- break;
- case ISQ_RX_MISS_EVENT:
- dev->stats.rx_missed_errors += (status >> 6);
- break;
- case ISQ_TX_COL_EVENT:
- dev->stats.collisions += (status >> 6);
- break;
- }
- }
- return IRQ_HANDLED;
-}
-
-/* We have a good packet(s), get it/them out of the buffers. */
-static void
-net_rx(struct net_device *dev)
-{
- struct sk_buff *skb;
- int status, length;
-
- status = readreg(dev, PP_RxStatus);
- if ((status & RX_OK) == 0) {
- dev->stats.rx_errors++;
- if (status & RX_RUNT)
- dev->stats.rx_length_errors++;
- if (status & RX_EXTRA_DATA)
- dev->stats.rx_length_errors++;
- if ((status & RX_CRC_ERROR) &&
- !(status & (RX_EXTRA_DATA|RX_RUNT)))
- /* per str 172 */
- dev->stats.rx_crc_errors++;
- if (status & RX_DRIBBLE)
- dev->stats.rx_frame_errors++;
- return;
- }
-
- length = readreg(dev, PP_RxLength);
- /* Malloc up new buffer. */
- skb = alloc_skb(length, GFP_ATOMIC);
- if (skb == NULL) {
- printk("%s: Memory squeeze, dropping packet.\n", dev->name);
- dev->stats.rx_dropped++;
- return;
- }
- skb_put(skb, length);
-
- skb_copy_to_linear_data(skb, (void *)(dev->mem_start + PP_RxFrame),
- length);
-
- if (net_debug > 3)printk("%s: received %d byte packet of type %x\n",
- dev->name, length,
- (skb->data[ETH_ALEN+ETH_ALEN] << 8)
- | skb->data[ETH_ALEN+ETH_ALEN+1]);
-
- skb->protocol=eth_type_trans(skb,dev);
- netif_rx(skb);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += length;
-}
-
-/* The inverse routine to net_open(). */
-static int
-net_close(struct net_device *dev)
-{
-
- writereg(dev, PP_RxCFG, 0);
- writereg(dev, PP_TxCFG, 0);
- writereg(dev, PP_BufCFG, 0);
- writereg(dev, PP_BusCTL, 0);
-
- netif_stop_queue(dev);
-
- free_irq(dev->irq, dev);
-
- /* Update the statistics here. */
-
- return 0;
-
-}
-
-/* Get the current statistics. This may be called with the card open or
- closed. */
-static struct net_device_stats *
-net_get_stats(struct net_device *dev)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- /* Update the statistics from the device registers. */
- dev->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6);
- dev->stats.collisions += (readreg(dev, PP_TxCol) >> 6);
- local_irq_restore(flags);
-
- return &dev->stats;
-}
-
-static void set_multicast_list(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
-
- if(dev->flags&IFF_PROMISC)
- {
- lp->rx_mode = RX_ALL_ACCEPT;
- } else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) {
- /* The multicast-accept list is initialized to accept-all, and we
- rely on higher-level filtering for now. */
- lp->rx_mode = RX_MULTCAST_ACCEPT;
- }
- else
- lp->rx_mode = 0;
-
- writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
-
- /* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
- writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
- (lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
-}
-
-
-static int set_mac_address(struct net_device *dev, void *addr)
-{
- int i;
- printk("%s: Setting MAC address to ", dev->name);
- for (i = 0; i < 6; i++)
- printk(" %2.2x", dev->dev_addr[i] = ((unsigned char *)addr)[i]);
- printk(".\n");
- /* set the Ethernet address */
- for (i=0; i < ETH_ALEN/2; i++)
- writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
-
- return 0;
-}
-
-#ifdef MODULE
-
-static struct net_device *dev_cs89x0;
-static int debug;
-
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "CS89[02]0 debug level (0-5)");
-MODULE_LICENSE("GPL");
-
-int __init
-init_module(void)
-{
- net_debug = debug;
- dev_cs89x0 = mac89x0_probe(-1);
- if (IS_ERR(dev_cs89x0)) {
- printk(KERN_WARNING "mac89x0.c: No card found\n");
- return PTR_ERR(dev_cs89x0);
- }
- return 0;
-}
-
-void
-cleanup_module(void)
-{
- unregister_netdev(dev_cs89x0);
- nubus_writew(0, dev_cs89x0->base_addr + ADD_PORT);
- free_netdev(dev_cs89x0);
-}
-#endif /* MODULE */