summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h')
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h69
1 files changed, 46 insertions, 23 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index e58073ef33b4..44609de4e5dc 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -160,8 +160,11 @@
#define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 0x6007c
/* [RW 10] Write client 0: Assert pause threshold. */
#define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068
-#define BRB1_REG_PAUSE_LOW_THRESHOLD_1 0x6006c
-/* [R 24] The number of full blocks occupied by port. */
+/* [RW 1] Indicates if to use per-class guaranty mode (new mode) or per-MAC
+ * guaranty mode (backwards-compatible mode). 0=per-MAC guaranty mode (BC
+ * mode). 1=per-class guaranty mode (new mode). */
+#define BRB1_REG_PER_CLASS_GUARANTY_MODE 0x60268
+/* [R 24] The number of full blocks occpied by port. */
#define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 0x60094
/* [RW 1] Reset the design by software. */
#define BRB1_REG_SOFT_RESET 0x600dc
@@ -1619,6 +1622,14 @@
register bits. */
#define MISC_REG_LCPLL_CTRL_1 0xa2a4
#define MISC_REG_LCPLL_CTRL_REG_2 0xa2a8
+/* [RW 1] LCPLL power down. Global register. Active High. Reset on POR
+ * reset. */
+#define MISC_REG_LCPLL_E40_PWRDWN 0xaa74
+/* [RW 1] LCPLL VCO reset. Global register. Active Low Reset on POR reset. */
+#define MISC_REG_LCPLL_E40_RESETB_ANA 0xaa78
+/* [RW 1] LCPLL post-divider reset. Global register. Active Low Reset on POR
+ * reset. */
+#define MISC_REG_LCPLL_E40_RESETB_DIG 0xaa7c
/* [RW 4] Interrupt mask register #0 read/write */
#define MISC_REG_MISC_INT_MASK 0xa388
/* [RW 1] Parity mask register #0 read/write */
@@ -1754,6 +1765,7 @@
* is compared to the value on ctrl_md_devad. Drives output
* misc_xgxs0_phy_addr. Global register. */
#define MISC_REG_WC0_CTRL_PHY_ADDR 0xa9cc
+#define MISC_REG_WC0_RESET 0xac30
/* [RW 2] XMAC Core port mode. Indicates the number of ports on the system
side. This should be less than or equal to phy_port_mode; if some of the
ports are not used. This enables reduction of frequency on the core side.
@@ -6823,11 +6835,13 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER 0x0000
#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER 0x0100
#define MDIO_CTL_REG_84823_MEDIA_FIBER_1G 0x1000
-#define MDIO_CTL_REG_84823_USER_CTRL_REG 0x4005
-#define MDIO_CTL_REG_84823_USER_CTRL_CMS 0x0080
-
-#define MDIO_PMA_REG_84823_CTL_LED_CTL_1 0xa8e3
-#define MDIO_PMA_REG_84823_LED3_STRETCH_EN 0x0080
+#define MDIO_CTL_REG_84823_USER_CTRL_REG 0x4005
+#define MDIO_CTL_REG_84823_USER_CTRL_CMS 0x0080
+#define MDIO_PMA_REG_84823_CTL_SLOW_CLK_CNT_HIGH 0xa82b
+#define MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ 0x2f
+#define MDIO_PMA_REG_84823_CTL_LED_CTL_1 0xa8e3
+#define MDIO_PMA_REG_84833_CTL_LED_CTL_1 0xa8ec
+#define MDIO_PMA_REG_84823_LED3_STRETCH_EN 0x0080
/* BCM84833 only */
#define MDIO_84833_TOP_CFG_XGPHY_STRAP1 0x401a
@@ -6838,26 +6852,35 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_84833_TOP_CFG_SCRATCH_REG2 0x4007
#define MDIO_84833_TOP_CFG_SCRATCH_REG3 0x4008
#define MDIO_84833_TOP_CFG_SCRATCH_REG4 0x4009
-#define MDIO_84833_TOP_CFG_DATA3_REG 0x4011
-#define MDIO_84833_TOP_CFG_DATA4_REG 0x4012
+#define MDIO_84833_TOP_CFG_SCRATCH_REG26 0x4037
+#define MDIO_84833_TOP_CFG_SCRATCH_REG27 0x4038
+#define MDIO_84833_TOP_CFG_SCRATCH_REG28 0x4039
+#define MDIO_84833_TOP_CFG_SCRATCH_REG29 0x403a
+#define MDIO_84833_TOP_CFG_SCRATCH_REG30 0x403b
+#define MDIO_84833_TOP_CFG_SCRATCH_REG31 0x403c
+#define MDIO_84833_CMD_HDLR_COMMAND MDIO_84833_TOP_CFG_SCRATCH_REG0
+#define MDIO_84833_CMD_HDLR_STATUS MDIO_84833_TOP_CFG_SCRATCH_REG26
+#define MDIO_84833_CMD_HDLR_DATA1 MDIO_84833_TOP_CFG_SCRATCH_REG27
+#define MDIO_84833_CMD_HDLR_DATA2 MDIO_84833_TOP_CFG_SCRATCH_REG28
+#define MDIO_84833_CMD_HDLR_DATA3 MDIO_84833_TOP_CFG_SCRATCH_REG29
+#define MDIO_84833_CMD_HDLR_DATA4 MDIO_84833_TOP_CFG_SCRATCH_REG30
+#define MDIO_84833_CMD_HDLR_DATA5 MDIO_84833_TOP_CFG_SCRATCH_REG31
/* Mailbox command set used by 84833. */
-#define PHY84833_DIAG_CMD_PAIR_SWAP_CHANGE 0x2
+#define PHY84833_CMD_SET_PAIR_SWAP 0x8001
+#define PHY84833_CMD_GET_EEE_MODE 0x8008
+#define PHY84833_CMD_SET_EEE_MODE 0x8009
/* Mailbox status set used by 84833. */
-#define PHY84833_CMD_RECEIVED 0x0001
-#define PHY84833_CMD_IN_PROGRESS 0x0002
-#define PHY84833_CMD_COMPLETE_PASS 0x0004
-#define PHY84833_CMD_COMPLETE_ERROR 0x0008
-#define PHY84833_CMD_OPEN_FOR_CMDS 0x0010
-#define PHY84833_CMD_SYSTEM_BOOT 0x0020
-#define PHY84833_CMD_NOT_OPEN_FOR_CMDS 0x0040
-#define PHY84833_CMD_CLEAR_COMPLETE 0x0080
-#define PHY84833_CMD_OPEN_OVERRIDE 0xa5a5
-
+#define PHY84833_STATUS_CMD_RECEIVED 0x0001
+#define PHY84833_STATUS_CMD_IN_PROGRESS 0x0002
+#define PHY84833_STATUS_CMD_COMPLETE_PASS 0x0004
+#define PHY84833_STATUS_CMD_COMPLETE_ERROR 0x0008
+#define PHY84833_STATUS_CMD_OPEN_FOR_CMDS 0x0010
+#define PHY84833_STATUS_CMD_SYSTEM_BOOT 0x0020
+#define PHY84833_STATUS_CMD_NOT_OPEN_FOR_CMDS 0x0040
+#define PHY84833_STATUS_CMD_CLEAR_COMPLETE 0x0080
+#define PHY84833_STATUS_CMD_OPEN_OVERRIDE 0xa5a5
-/* 84833 F/W Feature Commands */
-#define PHY84833_DIAG_CMD_GET_EEE_MODE 0x27
-#define PHY84833_DIAG_CMD_SET_EEE_MODE 0x28
/* Warpcore clause 45 addressing */
#define MDIO_WC_DEVAD 0x3