diff options
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb4/t4_hw.c')
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 137 |
1 files changed, 137 insertions, 0 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 8e988d699d05..259d0dcb0089 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -330,6 +330,143 @@ int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc) return 0; } +/* + * t4_mem_win_rw - read/write memory through PCIE memory window + * @adap: the adapter + * @addr: address of first byte requested + * @data: MEMWIN0_APERTURE bytes of data containing the requested address + * @dir: direction of transfer 1 => read, 0 => write + * + * Read/write MEMWIN0_APERTURE bytes of data from MC starting at a + * MEMWIN0_APERTURE-byte-aligned address that covers the requested + * address @addr. + */ +static int t4_mem_win_rw(struct adapter *adap, u32 addr, __be32 *data, int dir) +{ + int i; + + /* + * Setup offset into PCIE memory window. Address must be a + * MEMWIN0_APERTURE-byte-aligned address. (Read back MA register to + * ensure that changes propagate before we attempt to use the new + * values.) + */ + t4_write_reg(adap, PCIE_MEM_ACCESS_OFFSET, + addr & ~(MEMWIN0_APERTURE - 1)); + t4_read_reg(adap, PCIE_MEM_ACCESS_OFFSET); + + /* Collecting data 4 bytes at a time upto MEMWIN0_APERTURE */ + for (i = 0; i < MEMWIN0_APERTURE; i = i+0x4) { + if (dir) + *data++ = t4_read_reg(adap, (MEMWIN0_BASE + i)); + else + t4_write_reg(adap, (MEMWIN0_BASE + i), *data++); + } + + return 0; +} + +/** + * t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window + * @adap: the adapter + * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC + * @addr: address within indicated memory type + * @len: amount of memory to transfer + * @buf: host memory buffer + * @dir: direction of transfer 1 => read, 0 => write + * + * Reads/writes an [almost] arbitrary memory region in the firmware: the + * firmware memory address, length and host buffer must be aligned on + * 32-bit boudaries. The memory is transferred as a raw byte sequence + * from/to the firmware's memory. If this memory contains data + * structures which contain multi-byte integers, it's the callers + * responsibility to perform appropriate byte order conversions. + */ +static int t4_memory_rw(struct adapter *adap, int mtype, u32 addr, u32 len, + __be32 *buf, int dir) +{ + u32 pos, start, end, offset, memoffset; + int ret; + + /* + * Argument sanity checks ... + */ + if ((addr & 0x3) || (len & 0x3)) + return -EINVAL; + + /* + * Offset into the region of memory which is being accessed + * MEM_EDC0 = 0 + * MEM_EDC1 = 1 + * MEM_MC = 2 + */ + memoffset = (mtype * (5 * 1024 * 1024)); + + /* Determine the PCIE_MEM_ACCESS_OFFSET */ + addr = addr + memoffset; + + /* + * The underlaying EDC/MC read routines read MEMWIN0_APERTURE bytes + * at a time so we need to round down the start and round up the end. + * We'll start copying out of the first line at (addr - start) a word + * at a time. + */ + start = addr & ~(MEMWIN0_APERTURE-1); + end = (addr + len + MEMWIN0_APERTURE-1) & ~(MEMWIN0_APERTURE-1); + offset = (addr - start)/sizeof(__be32); + + for (pos = start; pos < end; pos += MEMWIN0_APERTURE, offset = 0) { + __be32 data[MEMWIN0_APERTURE/sizeof(__be32)]; + + /* + * If we're writing, copy the data from the caller's memory + * buffer + */ + if (!dir) { + /* + * If we're doing a partial write, then we need to do + * a read-modify-write ... + */ + if (offset || len < MEMWIN0_APERTURE) { + ret = t4_mem_win_rw(adap, pos, data, 1); + if (ret) + return ret; + } + while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) && + len > 0) { + data[offset++] = *buf++; + len -= sizeof(__be32); + } + } + + /* + * Transfer a block of memory and bail if there's an error. + */ + ret = t4_mem_win_rw(adap, pos, data, dir); + if (ret) + return ret; + + /* + * If we're reading, copy the data into the caller's memory + * buffer. + */ + if (dir) + while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) && + len > 0) { + *buf++ = data[offset++]; + len -= sizeof(__be32); + } + } + + return 0; +} + +int t4_memory_write(struct adapter *adap, int mtype, u32 addr, u32 len, + __be32 *buf) +{ + return t4_memory_rw(adap, mtype, addr, len, buf, 0); +} + #define EEPROM_STAT_ADDR 0x7bfc #define VPD_BASE 0 #define VPD_LEN 512 |