summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/dlink/de600.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/dlink/de600.h')
-rw-r--r--drivers/net/ethernet/dlink/de600.h168
1 files changed, 0 insertions, 168 deletions
diff --git a/drivers/net/ethernet/dlink/de600.h b/drivers/net/ethernet/dlink/de600.h
deleted file mode 100644
index e80ecbabcf4e..000000000000
--- a/drivers/net/ethernet/dlink/de600.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/**************************************************
- * *
- * Definition of D-Link Ethernet Pocket adapter *
- * *
- **************************************************/
-/*
- * D-Link Ethernet pocket adapter ports
- */
-/*
- * OK, so I'm cheating, but there are an awful lot of
- * reads and writes in order to get anything in and out
- * of the DE-600 with 4 bits at a time in the parallel port,
- * so every saved instruction really helps :-)
- */
-
-#ifndef DE600_IO
-#define DE600_IO 0x378
-#endif
-
-#define DATA_PORT (DE600_IO)
-#define STATUS_PORT (DE600_IO + 1)
-#define COMMAND_PORT (DE600_IO + 2)
-
-#ifndef DE600_IRQ
-#define DE600_IRQ 7
-#endif
-/*
- * It really should look like this, and autoprobing as well...
- *
-#define DATA_PORT (dev->base_addr + 0)
-#define STATUS_PORT (dev->base_addr + 1)
-#define COMMAND_PORT (dev->base_addr + 2)
-#define DE600_IRQ dev->irq
- */
-
-/*
- * D-Link COMMAND_PORT commands
- */
-#define SELECT_NIC 0x04 /* select Network Interface Card */
-#define SELECT_PRN 0x1c /* select Printer */
-#define NML_PRN 0xec /* normal Printer situation */
-#define IRQEN 0x10 /* enable IRQ line */
-
-/*
- * D-Link STATUS_PORT
- */
-#define RX_BUSY 0x80
-#define RX_GOOD 0x40
-#define TX_FAILED16 0x10
-#define TX_BUSY 0x08
-
-/*
- * D-Link DATA_PORT commands
- * command in low 4 bits
- * data in high 4 bits
- * select current data nibble with HI_NIBBLE bit
- */
-#define WRITE_DATA 0x00 /* write memory */
-#define READ_DATA 0x01 /* read memory */
-#define STATUS 0x02 /* read status register */
-#define COMMAND 0x03 /* write command register (see COMMAND below) */
-#define NULL_COMMAND 0x04 /* null command */
-#define RX_LEN 0x05 /* read received packet length */
-#define TX_ADDR 0x06 /* set adapter transmit memory address */
-#define RW_ADDR 0x07 /* set adapter read/write memory address */
-#define HI_NIBBLE 0x08 /* read/write the high nibble of data,
- or-ed with rest of command */
-
-/*
- * command register, accessed through DATA_PORT with low bits = COMMAND
- */
-#define RX_ALL 0x01 /* PROMISCUOUS */
-#define RX_BP 0x02 /* default: BROADCAST & PHYSICAL ADDRESS */
-#define RX_MBP 0x03 /* MULTICAST, BROADCAST & PHYSICAL ADDRESS */
-
-#define TX_ENABLE 0x04 /* bit 2 */
-#define RX_ENABLE 0x08 /* bit 3 */
-
-#define RESET 0x80 /* set bit 7 high */
-#define STOP_RESET 0x00 /* set bit 7 low */
-
-/*
- * data to command register
- * (high 4 bits in write to DATA_PORT)
- */
-#define RX_PAGE2_SELECT 0x10 /* bit 4, only 2 pages to select */
-#define RX_BASE_PAGE 0x20 /* bit 5, always set when specifying RX_ADDR */
-#define FLIP_IRQ 0x40 /* bit 6 */
-
-/*
- * D-Link adapter internal memory:
- *
- * 0-2K 1:st transmit page (send from pointer up to 2K)
- * 2-4K 2:nd transmit page (send from pointer up to 4K)
- *
- * 4-6K 1:st receive page (data from 4K upwards)
- * 6-8K 2:nd receive page (data from 6K upwards)
- *
- * 8K+ Adapter ROM (contains magic code and last 3 bytes of Ethernet address)
- */
-#define MEM_2K 0x0800 /* 2048 */
-#define MEM_4K 0x1000 /* 4096 */
-#define MEM_6K 0x1800 /* 6144 */
-#define NODE_ADDRESS 0x2000 /* 8192 */
-
-#define RUNT 60 /* Too small Ethernet packet */
-
-/**************************************************
- * *
- * End of definition *
- * *
- **************************************************/
-
-/*
- * Index to functions, as function prototypes.
- */
-/* Routines used internally. (See "convenience macros") */
-static u8 de600_read_status(struct net_device *dev);
-static u8 de600_read_byte(unsigned char type, struct net_device *dev);
-
-/* Put in the device structure. */
-static int de600_open(struct net_device *dev);
-static int de600_close(struct net_device *dev);
-static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev);
-
-/* Dispatch from interrupts. */
-static irqreturn_t de600_interrupt(int irq, void *dev_id);
-static int de600_tx_intr(struct net_device *dev, int irq_status);
-static void de600_rx_intr(struct net_device *dev);
-
-/* Initialization */
-static void trigger_interrupt(struct net_device *dev);
-static int adapter_init(struct net_device *dev);
-
-/*
- * Convenience macros/functions for D-Link adapter
- */
-
-#define select_prn() outb_p(SELECT_PRN, COMMAND_PORT); DE600_SLOW_DOWN
-#define select_nic() outb_p(SELECT_NIC, COMMAND_PORT); DE600_SLOW_DOWN
-
-/* Thanks for hints from Mark Burton <markb@ordern.demon.co.uk> */
-#define de600_put_byte(data) ( \
- outb_p(((data) << 4) | WRITE_DATA , DATA_PORT), \
- outb_p(((data) & 0xf0) | WRITE_DATA | HI_NIBBLE, DATA_PORT))
-
-/*
- * The first two outb_p()'s below could perhaps be deleted if there
- * would be more delay in the last two. Not certain about it yet...
- */
-#define de600_put_command(cmd) ( \
- outb_p(( rx_page << 4) | COMMAND , DATA_PORT), \
- outb_p(( rx_page & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT), \
- outb_p(((rx_page | cmd) << 4) | COMMAND , DATA_PORT), \
- outb_p(((rx_page | cmd) & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT))
-
-#define de600_setup_address(addr,type) ( \
- outb_p((((addr) << 4) & 0xf0) | type , DATA_PORT), \
- outb_p(( (addr) & 0xf0) | type | HI_NIBBLE, DATA_PORT), \
- outb_p((((addr) >> 4) & 0xf0) | type , DATA_PORT), \
- outb_p((((addr) >> 8) & 0xf0) | type | HI_NIBBLE, DATA_PORT))
-
-#define rx_page_adr() ((rx_page & RX_PAGE2_SELECT)?(MEM_6K):(MEM_4K))
-
-/* Flip bit, only 2 pages */
-#define next_rx_page() (rx_page ^= RX_PAGE2_SELECT)
-
-#define tx_page_adr(a) (((a) + 1) * MEM_2K)