summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/dlink/de620.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/dlink/de620.h')
-rw-r--r--drivers/net/ethernet/dlink/de620.h117
1 files changed, 0 insertions, 117 deletions
diff --git a/drivers/net/ethernet/dlink/de620.h b/drivers/net/ethernet/dlink/de620.h
deleted file mode 100644
index e8d9a88f4cb5..000000000000
--- a/drivers/net/ethernet/dlink/de620.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*********************************************************
- * *
- * Definition of D-Link DE-620 Ethernet Pocket adapter *
- * *
- *********************************************************/
-
-/* DE-620's CMD port Command */
-#define CS0 0x08 /* 1->0 command strobe */
-#define ICEN 0x04 /* 0=enable DL3520 host interface */
-#define DS0 0x02 /* 1->0 data strobe 0 */
-#define DS1 0x01 /* 1->0 data strobe 1 */
-
-#define WDIR 0x20 /* general 0=read 1=write */
-#define RDIR 0x00 /* (not 100% confirm ) */
-#define PS2WDIR 0x00 /* ps/2 mode 1=read, 0=write */
-#define PS2RDIR 0x20
-
-#define IRQEN 0x10 /* 1 = enable printer IRQ line */
-#define SELECTIN 0x08 /* 1 = select printer */
-#define INITP 0x04 /* 0 = initial printer */
-#define AUTOFEED 0x02 /* 1 = printer auto form feed */
-#define STROBE 0x01 /* 0->1 data strobe */
-
-#define RESET 0x08
-#define NIS0 0x20 /* 0 = BNC, 1 = UTP */
-#define NCTL0 0x10
-
-/* DE-620 DIC Command */
-#define W_DUMMY 0x00 /* DIC reserved command */
-#define W_CR 0x20 /* DIC write command register */
-#define W_NPR 0x40 /* DIC write Next Page Register */
-#define W_TBR 0x60 /* DIC write Tx Byte Count 1 reg */
-#define W_RSA 0x80 /* DIC write Remote Start Addr 1 */
-
-/* DE-620's STAT port bits 7-4 */
-#define EMPTY 0x80 /* 1 = receive buffer empty */
-#define INTLEVEL 0x40 /* 1 = interrupt level is high */
-#define TXBF1 0x20 /* 1 = transmit buffer 1 is in use */
-#define TXBF0 0x10 /* 1 = transmit buffer 0 is in use */
-#define READY 0x08 /* 1 = h/w ready to accept cmd/data */
-
-/* IDC 1 Command */
-#define W_RSA1 0xa0 /* write remote start address 1 */
-#define W_RSA0 0xa1 /* write remote start address 0 */
-#define W_NPRF 0xa2 /* write next page register NPR15-NPR8 */
-#define W_DFR 0xa3 /* write delay factor register */
-#define W_CPR 0xa4 /* write current page register */
-#define W_SPR 0xa5 /* write start page register */
-#define W_EPR 0xa6 /* write end page register */
-#define W_SCR 0xa7 /* write system configuration register */
-#define W_TCR 0xa8 /* write Transceiver Configuration reg */
-#define W_EIP 0xa9 /* write EEPM Interface port */
-#define W_PAR0 0xaa /* write physical address register 0 */
-#define W_PAR1 0xab /* write physical address register 1 */
-#define W_PAR2 0xac /* write physical address register 2 */
-#define W_PAR3 0xad /* write physical address register 3 */
-#define W_PAR4 0xae /* write physical address register 4 */
-#define W_PAR5 0xaf /* write physical address register 5 */
-
-/* IDC 2 Command */
-#define R_STS 0xc0 /* read status register */
-#define R_CPR 0xc1 /* read current page register */
-#define R_BPR 0xc2 /* read boundary page register */
-#define R_TDR 0xc3 /* read time domain reflectometry reg */
-
-/* STATUS Register */
-#define EEDI 0x80 /* EEPM DO pin */
-#define TXSUC 0x40 /* tx success */
-#define T16 0x20 /* tx fail 16 times */
-#define TS1 0x40 /* 0=Tx success, 1=T16 */
-#define TS0 0x20 /* 0=Tx success, 1=T16 */
-#define RXGOOD 0x10 /* rx a good packet */
-#define RXCRC 0x08 /* rx a CRC error packet */
-#define RXSHORT 0x04 /* rx a short packet */
-#define COLS 0x02 /* coaxial collision status */
-#define LNKS 0x01 /* UTP link status */
-
-/* Command Register */
-#define CLEAR 0x10 /* reset part of hardware */
-#define NOPER 0x08 /* No Operation */
-#define RNOP 0x08
-#define RRA 0x06 /* After RR then auto-advance NPR & BPR(=NPR-1) */
-#define RRN 0x04 /* Normal Remote Read mode */
-#define RW1 0x02 /* Remote Write tx buffer 1 ( page 6 - 11 ) */
-#define RW0 0x00 /* Remote Write tx buffer 0 ( page 0 - 5 ) */
-#define TXEN 0x01 /* 0->1 tx enable */
-
-/* System Configuration Register */
-#define TESTON 0x80 /* test host data transfer reliability */
-#define SLEEP 0x40 /* sleep mode */
-#if 0
-#define FASTMODE 0x04 /* fast mode for intel 82360SL fast mode */
-#define BYTEMODE 0x02 /* byte mode */
-#else
-#define FASTMODE 0x20 /* fast mode for intel 82360SL fast mode */
-#define BYTEMODE 0x10 /* byte mode */
-#endif
-#define NIBBLEMODE 0x00 /* nibble mode */
-#define IRQINV 0x08 /* turn off IRQ line inverter */
-#define IRQNML 0x00 /* turn on IRQ line inverter */
-#define INTON 0x04
-#define AUTOFFSET 0x02 /* auto shift address to TPR+12 */
-#define AUTOTX 0x01 /* auto tx when leave RW mode */
-
-/* Transceiver Configuration Register */
-#define JABBER 0x80 /* generate jabber condition */
-#define TXSUCINT 0x40 /* enable tx success interrupt */
-#define T16INT 0x20 /* enable T16 interrupt */
-#define RXERRPKT 0x10 /* accept CRC error or short packet */
-#define EXTERNALB2 0x0C /* external loopback 2 */
-#define EXTERNALB1 0x08 /* external loopback 1 */
-#define INTERNALB 0x04 /* internal loopback */
-#define NMLOPERATE 0x00 /* normal operation */
-#define RXPBM 0x03 /* rx physical, broadcast, multicast */
-#define RXPB 0x02 /* rx physical, broadcast */
-#define RXALL 0x01 /* rx all packet */
-#define RXOFF 0x00 /* rx disable */