diff options
Diffstat (limited to 'drivers/net/ethernet/freescale/dpaa2/dpsw.h')
| -rw-r--r-- | drivers/net/ethernet/freescale/dpaa2/dpsw.h | 92 |
1 files changed, 92 insertions, 0 deletions
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpsw.h b/drivers/net/ethernet/freescale/dpaa2/dpsw.h index 35b4749cdcdb..08e37c475ae8 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpsw.h +++ b/drivers/net/ethernet/freescale/dpaa2/dpsw.h @@ -657,4 +657,96 @@ int dpsw_acl_add_if(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, int dpsw_acl_remove_if(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, u16 acl_id, const struct dpsw_acl_if_cfg *cfg); + +/** + * struct dpsw_acl_fields - ACL fields. + * @l2_dest_mac: Destination MAC address: BPDU, Multicast, Broadcast, Unicast, + * slow protocols, MVRP, STP + * @l2_source_mac: Source MAC address + * @l2_tpid: Layer 2 (Ethernet) protocol type, used to identify the following + * protocols: MPLS, PTP, PFC, ARP, Jumbo frames, LLDP, IEEE802.1ae, + * Q-in-Q, IPv4, IPv6, PPPoE + * @l2_pcp_dei: indicate which protocol is encapsulated in the payload + * @l2_vlan_id: layer 2 VLAN ID + * @l2_ether_type: layer 2 Ethernet type + * @l3_dscp: Layer 3 differentiated services code point + * @l3_protocol: Tells the Network layer at the destination host, to which + * Protocol this packet belongs to. The following protocol are + * supported: ICMP, IGMP, IPv4 (encapsulation), TCP, IPv6 + * (encapsulation), GRE, PTP + * @l3_source_ip: Source IPv4 IP + * @l3_dest_ip: Destination IPv4 IP + * @l4_source_port: Source TCP/UDP Port + * @l4_dest_port: Destination TCP/UDP Port + */ +struct dpsw_acl_fields { + u8 l2_dest_mac[6]; + u8 l2_source_mac[6]; + u16 l2_tpid; + u8 l2_pcp_dei; + u16 l2_vlan_id; + u16 l2_ether_type; + u8 l3_dscp; + u8 l3_protocol; + u32 l3_source_ip; + u32 l3_dest_ip; + u16 l4_source_port; + u16 l4_dest_port; +}; + +/** + * struct dpsw_acl_key - ACL key + * @match: Match fields + * @mask: Mask: b'1 - valid, b'0 don't care + */ +struct dpsw_acl_key { + struct dpsw_acl_fields match; + struct dpsw_acl_fields mask; +}; + +/** + * enum dpsw_acl_action - action to be run on the ACL rule match + * @DPSW_ACL_ACTION_DROP: Drop frame + * @DPSW_ACL_ACTION_REDIRECT: Redirect to certain port + * @DPSW_ACL_ACTION_ACCEPT: Accept frame + * @DPSW_ACL_ACTION_REDIRECT_TO_CTRL_IF: Redirect to control interface + */ +enum dpsw_acl_action { + DPSW_ACL_ACTION_DROP, + DPSW_ACL_ACTION_REDIRECT, + DPSW_ACL_ACTION_ACCEPT, + DPSW_ACL_ACTION_REDIRECT_TO_CTRL_IF +}; + +/** + * struct dpsw_acl_result - ACL action + * @action: Action should be taken when ACL entry hit + * @if_id: Interface IDs to redirect frame. Valid only if redirect selected for + * action + */ +struct dpsw_acl_result { + enum dpsw_acl_action action; + u16 if_id; +}; + +/** + * struct dpsw_acl_entry_cfg - ACL entry + * @key_iova: I/O virtual address of DMA-able memory filled with key after call + * to dpsw_acl_prepare_entry_cfg() + * @result: Required action when entry hit occurs + * @precedence: Precedence inside ACL 0 is lowest; This priority can not change + * during the lifetime of a Policy. It is user responsibility to + * space the priorities according to consequent rule additions. + */ +struct dpsw_acl_entry_cfg { + u64 key_iova; + struct dpsw_acl_result result; + int precedence; +}; + +void dpsw_acl_prepare_entry_cfg(const struct dpsw_acl_key *key, + u8 *entry_cfg_buf); + +int dpsw_acl_add_entry(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, + u16 acl_id, const struct dpsw_acl_entry_cfg *cfg); #endif /* __FSL_DPSW_H */ |