summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000/e1000_hw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000/e1000_hw.c')
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_hw.c216
1 files changed, 108 insertions, 108 deletions
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index b1af0d613caa..8172cf08cc33 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -1,5 +1,5 @@
/*******************************************************************************
-
+*
Intel PRO/1000 Linux driver
Copyright(c) 1999 - 2006 Intel Corporation.
@@ -106,7 +106,7 @@ u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = {
120, 120
};
-static DEFINE_SPINLOCK(e1000_eeprom_lock);
+static DEFINE_MUTEX(e1000_eeprom_lock);
static DEFINE_SPINLOCK(e1000_phy_lock);
/**
@@ -624,8 +624,8 @@ s32 e1000_init_hw(struct e1000_hw *hw)
/* Workaround for PCI-X problem when BIOS sets MMRBC
* incorrectly.
*/
- if (hw->bus_type == e1000_bus_type_pcix
- && e1000_pcix_get_mmrbc(hw) > 2048)
+ if (hw->bus_type == e1000_bus_type_pcix &&
+ e1000_pcix_get_mmrbc(hw) > 2048)
e1000_pcix_set_mmrbc(hw, 2048);
break;
}
@@ -683,10 +683,9 @@ static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
}
ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1,
- &eeprom_data);
- if (ret_val) {
+ &eeprom_data);
+ if (ret_val)
return ret_val;
- }
if (eeprom_data != EEPROM_RESERVED_WORD) {
/* Adjust SERDES output amplitude only. */
@@ -1074,8 +1073,8 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
if (hw->mac_type <= e1000_82543 ||
hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
- hw->mac_type == e1000_82541_rev_2
- || hw->mac_type == e1000_82547_rev_2)
+ hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2)
hw->phy_reset_disable = false;
return E1000_SUCCESS;
@@ -1652,7 +1651,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
mii_1000t_ctrl_reg = 0;
} else {
ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL,
- mii_1000t_ctrl_reg);
+ mii_1000t_ctrl_reg);
if (ret_val)
return ret_val;
}
@@ -1881,10 +1880,11 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543)
- && (!hw->autoneg)
- && (hw->forced_speed_duplex == e1000_10_full
- || hw->forced_speed_duplex == e1000_10_half)) {
+ if ((hw->mac_type == e1000_82544 ||
+ hw->mac_type == e1000_82543) &&
+ (!hw->autoneg) &&
+ (hw->forced_speed_duplex == e1000_10_full ||
+ hw->forced_speed_duplex == e1000_10_half)) {
ret_val = e1000_polarity_reversal_workaround(hw);
if (ret_val)
return ret_val;
@@ -2084,11 +2084,12 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
* so we had to force link. In this case, we need to force the
* configuration of the MAC to match the "fc" parameter.
*/
- if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed))
- || ((hw->media_type == e1000_media_type_internal_serdes)
- && (hw->autoneg_failed))
- || ((hw->media_type == e1000_media_type_copper)
- && (!hw->autoneg))) {
+ if (((hw->media_type == e1000_media_type_fiber) &&
+ (hw->autoneg_failed)) ||
+ ((hw->media_type == e1000_media_type_internal_serdes) &&
+ (hw->autoneg_failed)) ||
+ ((hw->media_type == e1000_media_type_copper) &&
+ (!hw->autoneg))) {
ret_val = e1000_force_mac_fc(hw);
if (ret_val) {
e_dbg("Error forcing flow control settings\n");
@@ -2193,8 +2194,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
(mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
- {
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
hw->fc = E1000_FC_TX_PAUSE;
e_dbg
("Flow Control = TX PAUSE frames only.\n");
@@ -2210,8 +2210,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
(mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
!(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
- {
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
hw->fc = E1000_FC_RX_PAUSE;
e_dbg
("Flow Control = RX PAUSE frames only.\n");
@@ -2460,10 +2459,11 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
* happen due to the execution of this workaround.
*/
- if ((hw->mac_type == e1000_82544
- || hw->mac_type == e1000_82543) && (!hw->autoneg)
- && (hw->forced_speed_duplex == e1000_10_full
- || hw->forced_speed_duplex == e1000_10_half)) {
+ if ((hw->mac_type == e1000_82544 ||
+ hw->mac_type == e1000_82543) &&
+ (!hw->autoneg) &&
+ (hw->forced_speed_duplex == e1000_10_full ||
+ hw->forced_speed_duplex == e1000_10_half)) {
ew32(IMC, 0xffffffff);
ret_val =
e1000_polarity_reversal_workaround(hw);
@@ -2528,8 +2528,10 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
*/
if (hw->tbi_compatibility_en) {
u16 speed, duplex;
+
ret_val =
e1000_get_speed_and_duplex(hw, &speed, &duplex);
+
if (ret_val) {
e_dbg
("Error getting link speed and duplex\n");
@@ -2628,10 +2630,10 @@ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data);
if (ret_val)
return ret_val;
- if ((*speed == SPEED_100
- && !(phy_data & NWAY_LPAR_100TX_FD_CAPS))
- || (*speed == SPEED_10
- && !(phy_data & NWAY_LPAR_10T_FD_CAPS)))
+ if ((*speed == SPEED_100 &&
+ !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) ||
+ (*speed == SPEED_10 &&
+ !(phy_data & NWAY_LPAR_10T_FD_CAPS)))
*duplex = HALF_DUPLEX;
}
}
@@ -2664,9 +2666,9 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw)
ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
if (ret_val)
return ret_val;
- if (phy_data & MII_SR_AUTONEG_COMPLETE) {
+ if (phy_data & MII_SR_AUTONEG_COMPLETE)
return E1000_SUCCESS;
- }
+
msleep(100);
}
return E1000_SUCCESS;
@@ -2803,11 +2805,11 @@ static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw)
return data;
}
-
/**
* e1000_read_phy_reg - read a phy register
* @hw: Struct containing variables accessed by shared code
* @reg_addr: address of the PHY register to read
+ * @phy_data: pointer to the value on the PHY register
*
* Reads the value from a PHY register, if the value is on a specific non zero
* page, sets the page first.
@@ -2823,14 +2825,13 @@ s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data)
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
(u16) reg_addr);
- if (ret_val) {
- spin_unlock_irqrestore(&e1000_phy_lock, flags);
- return ret_val;
- }
+ if (ret_val)
+ goto out;
}
ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
phy_data);
+out:
spin_unlock_irqrestore(&e1000_phy_lock, flags);
return ret_val;
@@ -2881,7 +2882,7 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
e_dbg("MDI Read Error\n");
return -E1000_ERR_PHY;
}
- *phy_data = (u16) mdic;
+ *phy_data = (u16)mdic;
} else {
mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
(phy_addr << E1000_MDIC_PHY_SHIFT) |
@@ -2906,7 +2907,7 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
e_dbg("MDI Error\n");
return -E1000_ERR_PHY;
}
- *phy_data = (u16) mdic;
+ *phy_data = (u16)mdic;
}
} else {
/* We must first send a preamble through the MDIO pin to signal
@@ -2960,7 +2961,7 @@ s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data)
if ((hw->phy_type == e1000_phy_igp) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
- (u16) reg_addr);
+ (u16)reg_addr);
if (ret_val) {
spin_unlock_irqrestore(&e1000_phy_lock, flags);
return ret_val;
@@ -2993,7 +2994,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
* the desired data.
*/
if (hw->mac_type == e1000_ce4100) {
- mdic = (((u32) phy_data) |
+ mdic = (((u32)phy_data) |
(reg_addr << E1000_MDIC_REG_SHIFT) |
(phy_addr << E1000_MDIC_PHY_SHIFT) |
(INTEL_CE_GBE_MDIC_OP_WRITE) |
@@ -3015,7 +3016,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
return -E1000_ERR_PHY;
}
} else {
- mdic = (((u32) phy_data) |
+ mdic = (((u32)phy_data) |
(reg_addr << E1000_MDIC_REG_SHIFT) |
(phy_addr << E1000_MDIC_PHY_SHIFT) |
(E1000_MDIC_OP_WRITE));
@@ -3053,7 +3054,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
(PHY_OP_WRITE << 12) | (PHY_SOF << 14));
mdic <<= 16;
- mdic |= (u32) phy_data;
+ mdic |= (u32)phy_data;
e1000_shift_out_mdi_bits(hw, mdic, 32);
}
@@ -3176,14 +3177,14 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- hw->phy_id = (u32) (phy_id_high << 16);
+ hw->phy_id = (u32)(phy_id_high << 16);
udelay(20);
ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
if (ret_val)
return ret_val;
- hw->phy_id |= (u32) (phy_id_low & PHY_REVISION_MASK);
- hw->phy_revision = (u32) phy_id_low & ~PHY_REVISION_MASK;
+ hw->phy_id |= (u32)(phy_id_low & PHY_REVISION_MASK);
+ hw->phy_revision = (u32)phy_id_low & ~PHY_REVISION_MASK;
switch (hw->mac_type) {
case e1000_82543:
@@ -3401,7 +3402,6 @@ static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
-
}
return E1000_SUCCESS;
@@ -3449,7 +3449,7 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
if (hw->phy_type == e1000_phy_igp)
return e1000_phy_igp_get_info(hw, phy_info);
else if ((hw->phy_type == e1000_phy_8211) ||
- (hw->phy_type == e1000_phy_8201))
+ (hw->phy_type == e1000_phy_8201))
return E1000_SUCCESS;
else
return e1000_phy_m88_get_info(hw, phy_info);
@@ -3611,11 +3611,11 @@ static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count)
*/
mask = 0x01 << (count - 1);
eecd = er32(EECD);
- if (eeprom->type == e1000_eeprom_microwire) {
+ if (eeprom->type == e1000_eeprom_microwire)
eecd &= ~E1000_EECD_DO;
- } else if (eeprom->type == e1000_eeprom_spi) {
+ else if (eeprom->type == e1000_eeprom_spi)
eecd |= E1000_EECD_DO;
- }
+
do {
/* A "1" is shifted out to the EEPROM by setting bit "DI" to a
* "1", and then raising and then lowering the clock (the SK bit
@@ -3851,7 +3851,7 @@ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
do {
e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI,
hw->eeprom.opcode_bits);
- spi_stat_reg = (u8) e1000_shift_in_ee_bits(hw, 8);
+ spi_stat_reg = (u8)e1000_shift_in_ee_bits(hw, 8);
if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI))
break;
@@ -3882,9 +3882,10 @@ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
{
s32 ret;
- spin_lock(&e1000_eeprom_lock);
+
+ mutex_lock(&e1000_eeprom_lock);
ret = e1000_do_read_eeprom(hw, offset, words, data);
- spin_unlock(&e1000_eeprom_lock);
+ mutex_unlock(&e1000_eeprom_lock);
return ret;
}
@@ -3896,15 +3897,16 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
if (hw->mac_type == e1000_ce4100) {
GBE_CONFIG_FLASH_READ(GBE_CONFIG_BASE_VIRT, offset, words,
- data);
+ data);
return E1000_SUCCESS;
}
/* A check for invalid values: offset too large, too many words, and
* not enough words.
*/
- if ((offset >= eeprom->word_size)
- || (words > eeprom->word_size - offset) || (words == 0)) {
+ if ((offset >= eeprom->word_size) ||
+ (words > eeprom->word_size - offset) ||
+ (words == 0)) {
e_dbg("\"words\" parameter out of bounds. Words = %d,"
"size = %d\n", offset, eeprom->word_size);
return -E1000_ERR_EEPROM;
@@ -3940,7 +3942,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
/* Send the READ command (opcode + addr) */
e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (u16) (offset * 2),
+ e1000_shift_out_ee_bits(hw, (u16)(offset * 2),
eeprom->address_bits);
/* Read the data. The address of the eeprom internally
@@ -3960,7 +3962,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
e1000_shift_out_ee_bits(hw,
EEPROM_READ_OPCODE_MICROWIRE,
eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (u16) (offset + i),
+ e1000_shift_out_ee_bits(hw, (u16)(offset + i),
eeprom->address_bits);
/* Read the data. For microwire, each word requires the
@@ -3968,6 +3970,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
*/
data[i] = e1000_shift_in_ee_bits(hw, 16);
e1000_standby_eeprom(hw);
+ cond_resched();
}
}
@@ -4004,7 +4007,7 @@ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
return E1000_SUCCESS;
#endif
- if (checksum == (u16) EEPROM_SUM)
+ if (checksum == (u16)EEPROM_SUM)
return E1000_SUCCESS;
else {
e_dbg("EEPROM Checksum Invalid\n");
@@ -4031,7 +4034,7 @@ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
}
checksum += eeprom_data;
}
- checksum = (u16) EEPROM_SUM - checksum;
+ checksum = (u16)EEPROM_SUM - checksum;
if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
e_dbg("EEPROM Write Error\n");
return -E1000_ERR_EEPROM;
@@ -4052,9 +4055,10 @@ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
{
s32 ret;
- spin_lock(&e1000_eeprom_lock);
+
+ mutex_lock(&e1000_eeprom_lock);
ret = e1000_do_write_eeprom(hw, offset, words, data);
- spin_unlock(&e1000_eeprom_lock);
+ mutex_unlock(&e1000_eeprom_lock);
return ret;
}
@@ -4066,15 +4070,16 @@ static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
if (hw->mac_type == e1000_ce4100) {
GBE_CONFIG_FLASH_WRITE(GBE_CONFIG_BASE_VIRT, offset, words,
- data);
+ data);
return E1000_SUCCESS;
}
/* A check for invalid values: offset too large, too many words, and
* not enough words.
*/
- if ((offset >= eeprom->word_size)
- || (words > eeprom->word_size - offset) || (words == 0)) {
+ if ((offset >= eeprom->word_size) ||
+ (words > eeprom->word_size - offset) ||
+ (words == 0)) {
e_dbg("\"words\" parameter out of bounds\n");
return -E1000_ERR_EEPROM;
}
@@ -4116,6 +4121,7 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
return -E1000_ERR_EEPROM;
e1000_standby_eeprom(hw);
+ cond_resched();
/* Send the WRITE ENABLE command (8 bit opcode ) */
e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI,
@@ -4132,7 +4138,7 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
/* Send the Write command (8-bit opcode + addr) */
e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (u16) ((offset + widx) * 2),
+ e1000_shift_out_ee_bits(hw, (u16)((offset + widx) * 2),
eeprom->address_bits);
/* Send the data */
@@ -4142,6 +4148,7 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
*/
while (widx < words) {
u16 word_out = data[widx];
+
word_out = (word_out >> 8) | (word_out << 8);
e1000_shift_out_ee_bits(hw, word_out, 16);
widx++;
@@ -4183,9 +4190,9 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
* EEPROM into write/erase mode.
*/
e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE,
- (u16) (eeprom->opcode_bits + 2));
+ (u16)(eeprom->opcode_bits + 2));
- e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
+ e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
/* Prepare the EEPROM */
e1000_standby_eeprom(hw);
@@ -4195,7 +4202,7 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE,
eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (u16) (offset + words_written),
+ e1000_shift_out_ee_bits(hw, (u16)(offset + words_written),
eeprom->address_bits);
/* Send the data */
@@ -4224,6 +4231,7 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
/* Recover from write */
e1000_standby_eeprom(hw);
+ cond_resched();
words_written++;
}
@@ -4235,9 +4243,9 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
* EEPROM out of write/erase mode.
*/
e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE,
- (u16) (eeprom->opcode_bits + 2));
+ (u16)(eeprom->opcode_bits + 2));
- e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
+ e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
return E1000_SUCCESS;
}
@@ -4260,8 +4268,8 @@ s32 e1000_read_mac_addr(struct e1000_hw *hw)
e_dbg("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
- hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF);
- hw->perm_mac_addr[i + 1] = (u8) (eeprom_data >> 8);
+ hw->perm_mac_addr[i] = (u8)(eeprom_data & 0x00FF);
+ hw->perm_mac_addr[i + 1] = (u8)(eeprom_data >> 8);
}
switch (hw->mac_type) {
@@ -4328,19 +4336,19 @@ u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
*/
case 0:
/* [47:36] i.e. 0x563 for above example address */
- hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
+ hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
break;
case 1:
/* [46:35] i.e. 0xAC6 for above example address */
- hash_value = ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
+ hash_value = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
break;
case 2:
/* [45:34] i.e. 0x5D8 for above example address */
- hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
+ hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
break;
case 3:
/* [43:32] i.e. 0x634 for above example address */
- hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
+ hash_value = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
break;
}
@@ -4361,9 +4369,9 @@ void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
/* HW expects these in little endian so we reverse the byte order
* from network order (big endian) to little endian
*/
- rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
- ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
- rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+ rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) |
+ ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
+ rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
/* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
* unit hang.
@@ -4537,7 +4545,7 @@ s32 e1000_setup_led(struct e1000_hw *hw)
if (ret_val)
return ret_val;
ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
- (u16) (hw->phy_spd_default &
+ (u16)(hw->phy_spd_default &
~IGP01E1000_GMII_SPD));
if (ret_val)
return ret_val;
@@ -4802,7 +4810,7 @@ void e1000_reset_adaptive(struct e1000_hw *hw)
void e1000_update_adaptive(struct e1000_hw *hw)
{
if (hw->adaptive_ifs) {
- if ((hw->collision_delta *hw->ifs_ratio) > hw->tx_packet_delta) {
+ if ((hw->collision_delta * hw->ifs_ratio) > hw->tx_packet_delta) {
if (hw->tx_packet_delta > MIN_NUM_XMITS) {
hw->in_ifs_mode = true;
if (hw->current_ifs_val < hw->ifs_max_val) {
@@ -4816,8 +4824,8 @@ void e1000_update_adaptive(struct e1000_hw *hw)
}
}
} else {
- if (hw->in_ifs_mode
- && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
+ if (hw->in_ifs_mode &&
+ (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
hw->current_ifs_val = 0;
hw->in_ifs_mode = false;
ew32(AIT, 0);
@@ -4922,7 +4930,6 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
/* Use old method for Phy older than IGP */
if (hw->phy_type == e1000_phy_m88) {
-
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
&phy_data);
if (ret_val)
@@ -4966,7 +4973,6 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
};
/* Read the AGC registers for all channels */
for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
-
ret_val =
e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
if (ret_val)
@@ -4976,8 +4982,8 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
/* Value bound check. */
if ((cur_agc_value >=
- IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1)
- || (cur_agc_value == 0))
+ IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) ||
+ (cur_agc_value == 0))
return -E1000_ERR_PHY;
agc_value += cur_agc_value;
@@ -5054,7 +5060,6 @@ static s32 e1000_check_polarity(struct e1000_hw *hw,
*/
if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
IGP01E1000_PSSR_SPEED_1000MBPS) {
-
/* Read the GIG initialization PCS register (0x00B4) */
ret_val =
e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG,
@@ -5175,8 +5180,8 @@ static s32 e1000_1000Mb_check_cable_length(struct e1000_hw *hw)
hw->ffe_config_state = e1000_ffe_config_active;
ret_val = e1000_write_phy_reg(hw,
- IGP01E1000_PHY_DSP_FFE,
- IGP01E1000_PHY_DSP_FFE_CM_CP);
+ IGP01E1000_PHY_DSP_FFE,
+ IGP01E1000_PHY_DSP_FFE_CM_CP);
if (ret_val)
return ret_val;
break;
@@ -5243,7 +5248,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
msleep(20);
ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_FORCE_GIGA);
+ IGP01E1000_IEEE_FORCE_GIGA);
if (ret_val)
return ret_val;
for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
@@ -5264,7 +5269,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
}
ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_RESTART_AUTONEG);
+ IGP01E1000_IEEE_RESTART_AUTONEG);
if (ret_val)
return ret_val;
@@ -5299,7 +5304,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
msleep(20);
ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_FORCE_GIGA);
+ IGP01E1000_IEEE_FORCE_GIGA);
if (ret_val)
return ret_val;
ret_val =
@@ -5309,7 +5314,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
return ret_val;
ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_RESTART_AUTONEG);
+ IGP01E1000_IEEE_RESTART_AUTONEG);
if (ret_val)
return ret_val;
@@ -5346,9 +5351,8 @@ static s32 e1000_set_phy_mode(struct e1000_hw *hw)
ret_val =
e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1,
&eeprom_data);
- if (ret_val) {
+ if (ret_val)
return ret_val;
- }
if ((eeprom_data != EEPROM_RESERVED_WORD) &&
(eeprom_data & EEPROM_PHY_CLASS_A)) {
@@ -5395,8 +5399,8 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
* from the lowest speeds starting from 10Mbps. The capability is used
* for Dx transitions and states
*/
- if (hw->mac_type == e1000_82541_rev_2
- || hw->mac_type == e1000_82547_rev_2) {
+ if (hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
ret_val =
e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
if (ret_val)
@@ -5446,11 +5450,9 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
if (ret_val)
return ret_val;
}
- } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT)
- || (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL)
- || (hw->autoneg_advertised ==
- AUTONEG_ADVERTISE_10_100_ALL)) {
-
+ } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) ||
+ (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL) ||
+ (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) {
if (hw->mac_type == e1000_82541_rev_2 ||
hw->mac_type == e1000_82547_rev_2) {
phy_data |= IGP01E1000_GMII_FLEX_SPD;
@@ -5474,7 +5476,6 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
phy_data);
if (ret_val)
return ret_val;
-
}
return E1000_SUCCESS;
}
@@ -5542,7 +5543,6 @@ static s32 e1000_set_vco_speed(struct e1000_hw *hw)
return E1000_SUCCESS;
}
-
/**
* e1000_enable_mng_pass_thru - check for bmc pass through
* @hw: Struct containing variables accessed by shared code