diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ich8lan.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 80 |
1 files changed, 70 insertions, 10 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 19e450a5bd31..2f9655cf5dd9 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -222,11 +222,18 @@ out: if (hw->mac.type >= e1000_pch_lpt) { /* Only unforce SMBus if ME is not active */ if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { + /* Switching PHY interface always returns MDI error + * so disable retry mechanism to avoid wasting time + */ + e1000e_disable_phy_retry(hw); + /* Unforce SMBus mode in PHY */ e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg); phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg); + e1000e_enable_phy_retry(hw); + /* Unforce SMBus mode in MAC */ mac_reg = er32(CTRL_EXT); mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; @@ -310,6 +317,11 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) goto out; } + /* There is no guarantee that the PHY is accessible at this time + * so disable retry mechanism to avoid wasting time + */ + e1000e_disable_phy_retry(hw); + /* The MAC-PHY interconnect may be in SMBus mode. If the PHY is * inaccessible and resetting the PHY is not blocked, toggle the * LANPHYPC Value bit to force the interconnect to PCIe mode. @@ -380,6 +392,8 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) break; } + e1000e_enable_phy_retry(hw); + hw->phy.ops.release(hw); if (!ret_val) { @@ -449,6 +463,11 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->id = e1000_phy_unknown; + if (hw->mac.type == e1000_pch_mtp) { + phy->retry_count = 2; + e1000e_enable_phy_retry(hw); + } + ret_val = e1000_init_phy_workarounds_pchlan(hw); if (ret_val) return ret_val; @@ -1090,6 +1109,46 @@ static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link) } /** + * e1000e_force_smbus - Force interfaces to transition to SMBUS mode. + * @hw: pointer to the HW structure + * + * Force the MAC and the PHY to SMBUS mode. Assumes semaphore already + * acquired. + * + * Return: 0 on success, negative errno on failure. + **/ +static s32 e1000e_force_smbus(struct e1000_hw *hw) +{ + u16 smb_ctrl = 0; + u32 ctrl_ext; + s32 ret_val; + + /* Switching PHY interface always returns MDI error + * so disable retry mechanism to avoid wasting time + */ + e1000e_disable_phy_retry(hw); + + /* Force SMBus mode in the PHY */ + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &smb_ctrl); + if (ret_val) { + e1000e_enable_phy_retry(hw); + return ret_val; + } + + smb_ctrl |= CV_SMB_CTRL_FORCE_SMBUS; + e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, smb_ctrl); + + e1000e_enable_phy_retry(hw); + + /* Force SMBus mode in the MAC */ + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, ctrl_ext); + + return 0; +} + +/** * e1000_enable_ulp_lpt_lp - configure Ultra Low Power mode for LynxPoint-LP * @hw: pointer to the HW structure * @to_sx: boolean indicating a system power state transition to Sx @@ -1146,17 +1205,11 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) if (ret_val) goto out; - /* Force SMBus mode in PHY */ - ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); - if (ret_val) + ret_val = e1000e_force_smbus(hw); + if (ret_val) { + e_dbg("Failed to force SMBUS: %d\n", ret_val); goto release; - phy_reg |= CV_SMB_CTRL_FORCE_SMBUS; - e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); - - /* Force SMBus mode in MAC */ - mac_reg = er32(CTRL_EXT); - mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, mac_reg); + } /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable * LPLU and disable Gig speed when entering ULP @@ -1313,6 +1366,11 @@ static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force) /* Toggle LANPHYPC Value bit */ e1000_toggle_lanphypc_pch_lpt(hw); + /* Switching PHY interface always returns MDI error + * so disable retry mechanism to avoid wasting time + */ + e1000e_disable_phy_retry(hw); + /* Unforce SMBus mode in PHY */ ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); if (ret_val) { @@ -1333,6 +1391,8 @@ static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force) phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); + e1000e_enable_phy_retry(hw); + /* Unforce SMBus mode in MAC */ mac_reg = er32(CTRL_EXT); mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; |