summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e')
-rw-r--r--drivers/net/ethernet/intel/e1000e/defines.h1
-rw-r--r--drivers/net/ethernet/intel/e1000e/e1000.h4
-rw-r--r--drivers/net/ethernet/intel/e1000e/mac.c11
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c92
-rw-r--r--drivers/net/ethernet/intel/e1000e/param.c16
-rw-r--r--drivers/net/ethernet/intel/e1000e/phy.c7
6 files changed, 79 insertions, 52 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 0641c0098738..afb7ebe20b24 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -398,6 +398,7 @@
#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */
#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
+#define E1000_ICR_RXO 0x00000040 /* Receiver Overrun */
#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
#define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */
/* If this bit asserted, the driver should claim the interrupt */
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 98e68888abb1..2311b31bdcac 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -94,10 +94,6 @@ struct e1000_info;
*/
#define E1000_CHECK_RESET_COUNT 25
-#define DEFAULT_RDTR 0
-#define DEFAULT_RADV 8
-#define BURST_RDTR 0x20
-#define BURST_RADV 0x20
#define PCICFG_DESC_RING_STATUS 0xe4
#define FLUSH_DESC_REQUIRED 0x100
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index b322011ec282..f457c5703d0c 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -410,6 +410,9 @@ void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw)
* Checks to see of the link status of the hardware has changed. If a
* change in link status has been detected, then we read the PHY registers
* to get the current speed/duplex if link exists.
+ *
+ * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link
+ * up).
**/
s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
{
@@ -423,7 +426,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
* Change or Rx Sequence Error interrupt.
*/
if (!mac->get_link_status)
- return 0;
+ return 1;
/* First we want to see if the MII Status Register reports
* link. If so, then we want to get the current speed/duplex
@@ -461,10 +464,12 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
* different link partner.
*/
ret_val = e1000e_config_fc_after_link_up(hw);
- if (ret_val)
+ if (ret_val) {
e_dbg("Error configuring flow control\n");
+ return ret_val;
+ }
- return ret_val;
+ return 1;
}
/**
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 327dfe5bedc0..f2f49239b015 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1071,7 +1071,8 @@ next_desc:
}
static void e1000_put_txbuf(struct e1000_ring *tx_ring,
- struct e1000_buffer *buffer_info)
+ struct e1000_buffer *buffer_info,
+ bool drop)
{
struct e1000_adapter *adapter = tx_ring->adapter;
@@ -1085,7 +1086,10 @@ static void e1000_put_txbuf(struct e1000_ring *tx_ring,
buffer_info->dma = 0;
}
if (buffer_info->skb) {
- dev_kfree_skb_any(buffer_info->skb);
+ if (drop)
+ dev_kfree_skb_any(buffer_info->skb);
+ else
+ dev_consume_skb_any(buffer_info->skb);
buffer_info->skb = NULL;
}
buffer_info->time_stamp = 0;
@@ -1199,7 +1203,7 @@ static void e1000e_tx_hwtstamp_work(struct work_struct *work)
wmb(); /* force write prior to skb_tstamp_tx */
skb_tstamp_tx(skb, &shhwtstamps);
- dev_kfree_skb_any(skb);
+ dev_consume_skb_any(skb);
} else if (time_after(jiffies, adapter->tx_hwtstamp_start
+ adapter->tx_timeout_factor * HZ)) {
dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
@@ -1254,7 +1258,7 @@ static bool e1000_clean_tx_irq(struct e1000_ring *tx_ring)
}
}
- e1000_put_txbuf(tx_ring, buffer_info);
+ e1000_put_txbuf(tx_ring, buffer_info, false);
tx_desc->upper.data = 0;
i++;
@@ -1910,14 +1914,30 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
struct net_device *netdev = data;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ u32 icr;
+ bool enable = true;
+
+ icr = er32(ICR);
+ if (icr & E1000_ICR_RXO) {
+ ew32(ICR, E1000_ICR_RXO);
+ enable = false;
+ /* napi poll will re-enable Other, make sure it runs */
+ if (napi_schedule_prep(&adapter->napi)) {
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __napi_schedule(&adapter->napi);
+ }
+ }
+ if (icr & E1000_ICR_LSC) {
+ ew32(ICR, E1000_ICR_LSC);
+ hw->mac.get_link_status = true;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
- hw->mac.get_link_status = true;
-
- /* guard against interrupt when we're going down */
- if (!test_bit(__E1000_DOWN, &adapter->state)) {
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ if (enable && !test_bit(__E1000_DOWN, &adapter->state))
ew32(IMS, E1000_IMS_OTHER);
- }
return IRQ_HANDLED;
}
@@ -2421,7 +2441,7 @@ static void e1000_clean_tx_ring(struct e1000_ring *tx_ring)
for (i = 0; i < tx_ring->count; i++) {
buffer_info = &tx_ring->buffer_info[i];
- e1000_put_txbuf(tx_ring, buffer_info);
+ e1000_put_txbuf(tx_ring, buffer_info, false);
}
netdev_reset_queue(adapter->netdev);
@@ -2687,7 +2707,8 @@ static int e1000e_poll(struct napi_struct *napi, int weight)
napi_complete_done(napi, work_done);
if (!test_bit(__E1000_DOWN, &adapter->state)) {
if (adapter->msix_entries)
- ew32(IMS, adapter->rx_ring->ims_val);
+ ew32(IMS, adapter->rx_ring->ims_val |
+ E1000_IMS_OTHER);
else
e1000_irq_enable(adapter);
}
@@ -3004,8 +3025,8 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
hw->mac.ops.config_collision_dist(hw);
- /* SPT and CNP Si errata workaround to avoid data corruption */
- if (hw->mac.type >= e1000_pch_spt) {
+ /* SPT and KBL Si errata workaround to avoid data corruption */
+ if (hw->mac.type == e1000_pch_spt) {
u32 reg_val;
reg_val = er32(IOSFPC);
@@ -3013,7 +3034,9 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
ew32(IOSFPC, reg_val);
reg_val = er32(TARC(0));
- reg_val |= E1000_TARC0_CB_MULTIQ_3_REQ;
+ /* SPT and KBL Si errata workaround to avoid Tx hang */
+ reg_val &= ~BIT(28);
+ reg_val |= BIT(29);
ew32(TARC(0), reg_val);
}
}
@@ -3223,14 +3246,6 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
*/
ew32(RXDCTL(0), E1000_RXDCTL_DMA_BURST_ENABLE);
ew32(RXDCTL(1), E1000_RXDCTL_DMA_BURST_ENABLE);
-
- /* override the delay timers for enabling bursting, only if
- * the value was not set by the user via module options
- */
- if (adapter->rx_int_delay == DEFAULT_RDTR)
- adapter->rx_int_delay = BURST_RDTR;
- if (adapter->rx_abs_int_delay == DEFAULT_RADV)
- adapter->rx_abs_int_delay = BURST_RADV;
}
/* set the Receive Delay Timer Register */
@@ -4204,7 +4219,7 @@ static void e1000e_trigger_lsc(struct e1000_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
if (adapter->msix_entries)
- ew32(ICS, E1000_ICS_OTHER);
+ ew32(ICS, E1000_ICS_LSC | E1000_ICS_OTHER);
else
ew32(ICS, E1000_ICS_LSC);
}
@@ -4808,9 +4823,9 @@ static void e1000e_update_phy_task(struct work_struct *work)
* Need to wait a few seconds after link up to get diagnostic information from
* the phy
**/
-static void e1000_update_phy_info(unsigned long data)
+static void e1000_update_phy_info(struct timer_list *t)
{
- struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ struct e1000_adapter *adapter = from_timer(adapter, t, phy_info_timer);
if (test_bit(__E1000_DOWN, &adapter->state))
return;
@@ -5074,14 +5089,14 @@ static bool e1000e_has_link(struct e1000_adapter *adapter)
/* get_link_status is set on LSC (link status) interrupt or
* Rx sequence error interrupt. get_link_status will stay
- * false until the check_for_link establishes link
+ * true until the check_for_link establishes link
* for copper adapters ONLY
*/
switch (hw->phy.media_type) {
case e1000_media_type_copper:
if (hw->mac.get_link_status) {
ret_val = hw->mac.ops.check_for_link(hw);
- link_active = !hw->mac.get_link_status;
+ link_active = ret_val > 0;
} else {
link_active = true;
}
@@ -5092,14 +5107,14 @@ static bool e1000e_has_link(struct e1000_adapter *adapter)
break;
case e1000_media_type_internal_serdes:
ret_val = hw->mac.ops.check_for_link(hw);
- link_active = adapter->hw.mac.serdes_has_link;
+ link_active = hw->mac.serdes_has_link;
break;
default:
case e1000_media_type_unknown:
break;
}
- if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
+ if ((ret_val == -E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
(er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
/* See e1000_kmrn_lock_loss_workaround_ich8lan() */
e_info("Gigabit has been disabled, downgrading speed\n");
@@ -5144,9 +5159,9 @@ static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter)
* e1000_watchdog - Timer Call-back
* @data: pointer to adapter cast into an unsigned long
**/
-static void e1000_watchdog(unsigned long data)
+static void e1000_watchdog(struct timer_list *t)
{
- struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ struct e1000_adapter *adapter = from_timer(adapter, t, watchdog_timer);
/* Do the rest outside of interrupt context */
schedule_work(&adapter->watchdog_task);
@@ -5614,7 +5629,7 @@ dma_error:
i += tx_ring->count;
i--;
buffer_info = &tx_ring->buffer_info[i];
- e1000_put_txbuf(tx_ring, buffer_info);
+ e1000_put_txbuf(tx_ring, buffer_info, true);
}
return 0;
@@ -7252,13 +7267,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_eeprom;
}
- init_timer(&adapter->watchdog_timer);
- adapter->watchdog_timer.function = e1000_watchdog;
- adapter->watchdog_timer.data = (unsigned long)adapter;
-
- init_timer(&adapter->phy_info_timer);
- adapter->phy_info_timer.function = e1000_update_phy_info;
- adapter->phy_info_timer.data = (unsigned long)adapter;
+ timer_setup(&adapter->watchdog_timer, e1000_watchdog, 0);
+ timer_setup(&adapter->phy_info_timer, e1000_update_phy_info, 0);
INIT_WORK(&adapter->reset_task, e1000_reset_task);
INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
@@ -7411,7 +7421,7 @@ static void e1000_remove(struct pci_dev *pdev)
if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) {
cancel_work_sync(&adapter->tx_hwtstamp_work);
if (adapter->tx_hwtstamp_skb) {
- dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
+ dev_consume_skb_any(adapter->tx_hwtstamp_skb);
adapter->tx_hwtstamp_skb = NULL;
}
}
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
index 6d8c39abee16..47da51864543 100644
--- a/drivers/net/ethernet/intel/e1000e/param.c
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -73,17 +73,25 @@ E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
/* Receive Interrupt Delay in units of 1.024 microseconds
* hardware will likely hang if you set this to anything but zero.
*
+ * Burst variant is used as default if device has FLAG2_DMA_BURST.
+ *
* Valid Range: 0-65535
*/
E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
+#define DEFAULT_RDTR 0
+#define BURST_RDTR 0x20
#define MAX_RXDELAY 0xFFFF
#define MIN_RXDELAY 0
/* Receive Absolute Interrupt Delay in units of 1.024 microseconds
*
+ * Burst variant is used as default if device has FLAG2_DMA_BURST.
+ *
* Valid Range: 0-65535
*/
E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
+#define DEFAULT_RADV 8
+#define BURST_RADV 0x20
#define MAX_RXABSDELAY 0xFFFF
#define MIN_RXABSDELAY 0
@@ -297,6 +305,9 @@ void e1000e_check_options(struct e1000_adapter *adapter)
.max = MAX_RXDELAY } }
};
+ if (adapter->flags2 & FLAG2_DMA_BURST)
+ opt.def = BURST_RDTR;
+
if (num_RxIntDelay > bd) {
adapter->rx_int_delay = RxIntDelay[bd];
e1000_validate_option(&adapter->rx_int_delay, &opt,
@@ -307,7 +318,7 @@ void e1000e_check_options(struct e1000_adapter *adapter)
}
/* Receive Absolute Interrupt Delay */
{
- static const struct e1000_option opt = {
+ static struct e1000_option opt = {
.type = range_option,
.name = "Receive Absolute Interrupt Delay",
.err = "using default of "
@@ -317,6 +328,9 @@ void e1000e_check_options(struct e1000_adapter *adapter)
.max = MAX_RXABSDELAY } }
};
+ if (adapter->flags2 & FLAG2_DMA_BURST)
+ opt.def = BURST_RADV;
+
if (num_RxAbsIntDelay > bd) {
adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index d78d47b41a71..86ff0969efb6 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -1744,6 +1744,7 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
s32 ret_val = 0;
u16 i, phy_status;
+ *success = false;
for (i = 0; i < iterations; i++) {
/* Some PHYs require the MII_BMSR register to be read
* twice due to the link bit being sticky. No harm doing
@@ -1763,16 +1764,16 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
if (ret_val)
break;
- if (phy_status & BMSR_LSTATUS)
+ if (phy_status & BMSR_LSTATUS) {
+ *success = true;
break;
+ }
if (usec_interval >= 1000)
msleep(usec_interval / 1000);
else
udelay(usec_interval);
}
- *success = (i < iterations);
-
return ret_val;
}
generated by cgit (git 2.34.1) at 2024-06-07 04:31:52 +0000