summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/igc/igc_defines.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/igc/igc_defines.h')
-rw-r--r--drivers/net/ethernet/intel/igc/igc_defines.h68
1 files changed, 63 insertions, 5 deletions
diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h
index b909f00a79e6..0103dda32f39 100644
--- a/drivers/net/ethernet/intel/igc/igc_defines.h
+++ b/drivers/net/ethernet/intel/igc/igc_defines.h
@@ -8,6 +8,8 @@
#define REQ_TX_DESCRIPTOR_MULTIPLE 8
#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+#define IGC_CTRL_EXT_SDP2_DIR 0x00000400 /* SDP2 Data direction */
+#define IGC_CTRL_EXT_SDP3_DIR 0x00000800 /* SDP3 Data direction */
#define IGC_CTRL_EXT_DRV_LOAD 0x10000000 /* Drv loaded bit for FW */
/* Definitions for power management and wakeup registers */
@@ -96,6 +98,9 @@
#define IGC_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
#define IGC_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
+#define IGC_CTRL_SDP0_DIR 0x00400000 /* SDP0 Data direction */
+#define IGC_CTRL_SDP1_DIR 0x00800000 /* SDP1 Data direction */
+
/* As per the EAS the maximum supported size is 9.5KB (9728 bytes) */
#define MAX_JUMBO_FRAME_SIZE 0x2600
@@ -403,6 +408,64 @@
#define IGC_TSYNCTXCTL_START_SYNC 0x80000000 /* initiate sync */
#define IGC_TSYNCTXCTL_TXSYNSIG 0x00000020 /* Sample TX tstamp in PHY sop */
+/* Timer selection bits */
+#define IGC_AUX_IO_TIMER_SEL_SYSTIM0 (0u << 30) /* Select SYSTIM0 for auxiliary time stamp */
+#define IGC_AUX_IO_TIMER_SEL_SYSTIM1 (1u << 30) /* Select SYSTIM1 for auxiliary time stamp */
+#define IGC_AUX_IO_TIMER_SEL_SYSTIM2 (2u << 30) /* Select SYSTIM2 for auxiliary time stamp */
+#define IGC_AUX_IO_TIMER_SEL_SYSTIM3 (3u << 30) /* Select SYSTIM3 for auxiliary time stamp */
+#define IGC_TT_IO_TIMER_SEL_SYSTIM0 (0u << 30) /* Select SYSTIM0 for target time stamp */
+#define IGC_TT_IO_TIMER_SEL_SYSTIM1 (1u << 30) /* Select SYSTIM1 for target time stamp */
+#define IGC_TT_IO_TIMER_SEL_SYSTIM2 (2u << 30) /* Select SYSTIM2 for target time stamp */
+#define IGC_TT_IO_TIMER_SEL_SYSTIM3 (3u << 30) /* Select SYSTIM3 for target time stamp */
+
+/* TSAUXC Configuration Bits */
+#define IGC_TSAUXC_EN_TT0 BIT(0) /* Enable target time 0. */
+#define IGC_TSAUXC_EN_TT1 BIT(1) /* Enable target time 1. */
+#define IGC_TSAUXC_EN_CLK0 BIT(2) /* Enable Configurable Frequency Clock 0. */
+#define IGC_TSAUXC_EN_CLK1 BIT(5) /* Enable Configurable Frequency Clock 1. */
+#define IGC_TSAUXC_EN_TS0 BIT(8) /* Enable hardware timestamp 0. */
+#define IGC_TSAUXC_AUTT0 BIT(9) /* Auxiliary Timestamp Taken. */
+#define IGC_TSAUXC_EN_TS1 BIT(10) /* Enable hardware timestamp 0. */
+#define IGC_TSAUXC_AUTT1 BIT(11) /* Auxiliary Timestamp Taken. */
+#define IGC_TSAUXC_PLSG BIT(17) /* Generate a pulse. */
+#define IGC_TSAUXC_DISABLE1 BIT(27) /* Disable SYSTIM0 Count Operation. */
+#define IGC_TSAUXC_DISABLE2 BIT(28) /* Disable SYSTIM1 Count Operation. */
+#define IGC_TSAUXC_DISABLE3 BIT(29) /* Disable SYSTIM2 Count Operation. */
+#define IGC_TSAUXC_DIS_TS_CLEAR BIT(30) /* Disable EN_TT0/1 auto clear. */
+#define IGC_TSAUXC_DISABLE0 BIT(31) /* Disable SYSTIM0 Count Operation. */
+
+/* SDP Configuration Bits */
+#define IGC_AUX0_SEL_SDP0 (0u << 0) /* Assign SDP0 to auxiliary time stamp 0. */
+#define IGC_AUX0_SEL_SDP1 (1u << 0) /* Assign SDP1 to auxiliary time stamp 0. */
+#define IGC_AUX0_SEL_SDP2 (2u << 0) /* Assign SDP2 to auxiliary time stamp 0. */
+#define IGC_AUX0_SEL_SDP3 (3u << 0) /* Assign SDP3 to auxiliary time stamp 0. */
+#define IGC_AUX0_TS_SDP_EN (1u << 2) /* Enable auxiliary time stamp trigger 0. */
+#define IGC_AUX1_SEL_SDP0 (0u << 3) /* Assign SDP0 to auxiliary time stamp 1. */
+#define IGC_AUX1_SEL_SDP1 (1u << 3) /* Assign SDP1 to auxiliary time stamp 1. */
+#define IGC_AUX1_SEL_SDP2 (2u << 3) /* Assign SDP2 to auxiliary time stamp 1. */
+#define IGC_AUX1_SEL_SDP3 (3u << 3) /* Assign SDP3 to auxiliary time stamp 1. */
+#define IGC_AUX1_TS_SDP_EN (1u << 5) /* Enable auxiliary time stamp trigger 1. */
+#define IGC_TS_SDP0_SEL_TT0 (0u << 6) /* Target time 0 is output on SDP0. */
+#define IGC_TS_SDP0_SEL_TT1 (1u << 6) /* Target time 1 is output on SDP0. */
+#define IGC_TS_SDP0_SEL_FC0 (2u << 6) /* Freq clock 0 is output on SDP0. */
+#define IGC_TS_SDP0_SEL_FC1 (3u << 6) /* Freq clock 1 is output on SDP0. */
+#define IGC_TS_SDP0_EN (1u << 8) /* SDP0 is assigned to Tsync. */
+#define IGC_TS_SDP1_SEL_TT0 (0u << 9) /* Target time 0 is output on SDP1. */
+#define IGC_TS_SDP1_SEL_TT1 (1u << 9) /* Target time 1 is output on SDP1. */
+#define IGC_TS_SDP1_SEL_FC0 (2u << 9) /* Freq clock 0 is output on SDP1. */
+#define IGC_TS_SDP1_SEL_FC1 (3u << 9) /* Freq clock 1 is output on SDP1. */
+#define IGC_TS_SDP1_EN (1u << 11) /* SDP1 is assigned to Tsync. */
+#define IGC_TS_SDP2_SEL_TT0 (0u << 12) /* Target time 0 is output on SDP2. */
+#define IGC_TS_SDP2_SEL_TT1 (1u << 12) /* Target time 1 is output on SDP2. */
+#define IGC_TS_SDP2_SEL_FC0 (2u << 12) /* Freq clock 0 is output on SDP2. */
+#define IGC_TS_SDP2_SEL_FC1 (3u << 12) /* Freq clock 1 is output on SDP2. */
+#define IGC_TS_SDP2_EN (1u << 14) /* SDP2 is assigned to Tsync. */
+#define IGC_TS_SDP3_SEL_TT0 (0u << 15) /* Target time 0 is output on SDP3. */
+#define IGC_TS_SDP3_SEL_TT1 (1u << 15) /* Target time 1 is output on SDP3. */
+#define IGC_TS_SDP3_SEL_FC0 (2u << 15) /* Freq clock 0 is output on SDP3. */
+#define IGC_TS_SDP3_SEL_FC1 (3u << 15) /* Freq clock 1 is output on SDP3. */
+#define IGC_TS_SDP3_EN (1u << 17) /* SDP3 is assigned to Tsync. */
+
/* Transmit Scheduling */
#define IGC_TQAVCTRL_TRANSMIT_MODE_TSN 0x00000001
#define IGC_TQAVCTRL_ENHANCED_QAV 0x00000008
@@ -441,11 +504,6 @@
#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
#define MII_CR_POWER_DOWN 0x0800 /* Power down */
#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
-#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
-#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
-#define MII_CR_SPEED_1000 0x0040
-#define MII_CR_SPEED_100 0x2000
-#define MII_CR_SPEED_10 0x0000
/* PHY Status Register */
#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */