summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c')
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c59
1 files changed, 43 insertions, 16 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 42537336110c..d0113fc97b6f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2012 Intel Corporation.
+ Copyright(c) 1999 - 2013 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -41,7 +41,6 @@
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
- bool autoneg,
bool autoneg_wait_to_complete);
static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
u8 *eeprom_data);
@@ -633,15 +632,15 @@ out:
* ixgbe_setup_mac_link_82598 - Set MAC link speed
* @hw: pointer to hardware structure
* @speed: new link speed
- * @autoneg: true if auto-negotiation enabled
* @autoneg_wait_to_complete: true when waiting for completion is needed
*
* Set the link speed in the AUTOC register and restarts link.
**/
static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete)
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
{
+ bool autoneg = false;
s32 status = 0;
ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
@@ -685,20 +684,18 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
* ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field
* @hw: pointer to hardware structure
* @speed: new link speed
- * @autoneg: true if autonegotiation enabled
* @autoneg_wait_to_complete: true if waiting is needed to complete
*
* Sets the link speed in the AUTOC register in the MAC and restarts link.
**/
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
- bool autoneg,
bool autoneg_wait_to_complete)
{
s32 status;
/* Setup the PHY according to input speed */
- status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
+ status = hw->phy.ops.setup_link_speed(hw, speed,
autoneg_wait_to_complete);
/* Set up MAC */
ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
@@ -1006,15 +1003,16 @@ static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
}
/**
- * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface.
+ * ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface.
* @hw: pointer to hardware structure
- * @byte_offset: EEPROM byte offset to read
+ * @dev_addr: address to read from
+ * @byte_offset: byte offset to read from dev_addr
* @eeprom_data: value read
*
- * Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
+ * Performs 8 byte read operation to SFP module's data over I2C interface.
**/
-static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
- u8 *eeprom_data)
+static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr,
+ u8 byte_offset, u8 *eeprom_data)
{
s32 status = 0;
u16 sfp_addr = 0;
@@ -1028,7 +1026,7 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
* 0xC30D. These registers are used to talk to the SFP+
* module's EEPROM through the SDA/SCL (I2C) interface.
*/
- sfp_addr = (IXGBE_I2C_EEPROM_DEV_ADDR << 8) + byte_offset;
+ sfp_addr = (dev_addr << 8) + byte_offset;
sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK);
hw->phy.ops.write_reg(hw,
IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR,
@@ -1060,7 +1058,6 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
*eeprom_data = (u8)(sfp_data >> 8);
} else {
status = IXGBE_ERR_PHY;
- goto out;
}
out:
@@ -1068,6 +1065,36 @@ out:
}
/**
+ * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface.
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to read
+ * @eeprom_data: value read
+ *
+ * Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data)
+{
+ return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR,
+ byte_offset, eeprom_data);
+}
+
+/**
+ * ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface.
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset at address 0xA2
+ * @eeprom_data: value read
+ *
+ * Performs 8 byte read operation to SFP module's SFF-8472 data over I2C
+ **/
+static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *sff8472_data)
+{
+ return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR2,
+ byte_offset, sff8472_data);
+}
+
+/**
* ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
* @hw: pointer to hardware structure
*
@@ -1300,6 +1327,7 @@ static struct ixgbe_phy_operations phy_ops_82598 = {
.write_reg = &ixgbe_write_phy_reg_generic,
.setup_link = &ixgbe_setup_phy_link_generic,
.setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
+ .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_82598,
.read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598,
.check_overtemp = &ixgbe_tn_check_overtemp,
};
@@ -1311,4 +1339,3 @@ struct ixgbe_info ixgbe_82598_info = {
.eeprom_ops = &eeprom_ops_82598,
.phy_ops = &phy_ops_82598,
};
-