diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 15 |
1 files changed, 13 insertions, 2 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index 654a402f0e9e..91bde90f9265 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -378,7 +378,7 @@ static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw) /** * ixgbe_get_phy_type_from_id - Get the phy type - * @hw: pointer to hardware structure + * @phy_id: hardware phy id * **/ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) @@ -489,6 +489,7 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) * the SWFW lock * @hw: pointer to hardware structure * @reg_addr: 32 bit address of PHY register to read + * @device_type: 5 bit device type * @phy_data: Pointer to read data from PHY register **/ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, @@ -564,6 +565,7 @@ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, * using the SWFW lock - this function is needed in most cases * @hw: pointer to hardware structure * @reg_addr: 32 bit address of PHY register to read + * @device_type: 5 bit device type * @phy_data: Pointer to read data from PHY register **/ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, @@ -763,6 +765,7 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities * @hw: pointer to hardware structure * @speed: new link speed + * @autoneg_wait_to_complete: unused **/ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -861,6 +864,8 @@ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, /** * ixgbe_check_phy_link_tnx - Determine link and speed status * @hw: pointer to hardware structure + * @speed: link speed + * @link_up: status of link * * Reads the VS1 register to determine if link is up and the current speed for * the PHY. @@ -1667,7 +1672,7 @@ s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, * ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface * @hw: pointer to hardware structure * @byte_offset: byte offset at address 0xA2 - * @eeprom_data: value read + * @sff8472_data: value read * * Performs byte read operation to SFP module's SFF-8472 data over I2C **/ @@ -1714,6 +1719,7 @@ static bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr) * ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to read + * @dev_addr: device address * @data: value read * @lock: true if to take and release semaphore * @@ -1804,6 +1810,7 @@ fail: * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to read + * @dev_addr: device address * @data: value read * * Performs byte read operation to SFP module's EEPROM over I2C interface at @@ -1820,6 +1827,7 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, * ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to read + * @dev_addr: device address * @data: value read * * Performs byte read operation to SFP module's EEPROM over I2C interface at @@ -1836,6 +1844,7 @@ s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset, * ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to write + * @dev_addr: device address * @data: value to write * @lock: true if to take and release semaphore * @@ -1904,6 +1913,7 @@ fail: * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to write + * @dev_addr: device address * @data: value to write * * Performs byte write operation to SFP module's EEPROM over I2C interface at @@ -1920,6 +1930,7 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, * ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to write + * @dev_addr: device address * @data: value to write * * Performs byte write operation to SFP module's EEPROM over I2C interface at |