summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c')
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c220
1 files changed, 94 insertions, 126 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index ebe0ac950b14..87aca3f7c3de 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -26,6 +26,8 @@
#include "ixgbe_common.h"
#include "ixgbe_phy.h"
+static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *, ixgbe_link_speed);
+
static s32 ixgbe_get_invariants_X550_x(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
@@ -85,79 +87,6 @@ static s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value)
}
/**
- * ixgbe_check_cs4227_reg - Perform diag on a CS4227 register
- * @hw: pointer to hardware structure
- * @reg: the register to check
- *
- * Performs a diagnostic on a register in the CS4227 chip. Returns an error
- * if it is not operating correctly.
- * This function assumes that the caller has acquired the proper semaphore.
- */
-static s32 ixgbe_check_cs4227_reg(struct ixgbe_hw *hw, u16 reg)
-{
- s32 status;
- u32 retry;
- u16 reg_val;
-
- reg_val = (IXGBE_CS4227_EDC_MODE_DIAG << 1) | 1;
- status = ixgbe_write_cs4227(hw, reg, reg_val);
- if (status)
- return status;
- for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) {
- msleep(IXGBE_CS4227_CHECK_DELAY);
- reg_val = 0xFFFF;
- ixgbe_read_cs4227(hw, reg, &reg_val);
- if (!reg_val)
- break;
- }
- if (reg_val) {
- hw_err(hw, "CS4227 reg 0x%04X failed diagnostic\n", reg);
- return status;
- }
-
- return 0;
-}
-
-/**
- * ixgbe_get_cs4227_status - Return CS4227 status
- * @hw: pointer to hardware structure
- *
- * Performs a diagnostic on the CS4227 chip. Returns an error if it is
- * not operating correctly.
- * This function assumes that the caller has acquired the proper semaphore.
- */
-static s32 ixgbe_get_cs4227_status(struct ixgbe_hw *hw)
-{
- s32 status;
- u16 value = 0;
-
- /* Exit if the diagnostic has already been performed. */
- status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value);
- if (status)
- return status;
- if (value == IXGBE_CS4227_RESET_COMPLETE)
- return 0;
-
- /* Check port 0. */
- status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_LINE_SPARE24_LSB);
- if (status)
- return status;
-
- status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_HOST_SPARE24_LSB);
- if (status)
- return status;
-
- /* Check port 1. */
- status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_LINE_SPARE24_LSB +
- (1 << 12));
- if (status)
- return status;
-
- return ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_HOST_SPARE24_LSB +
- (1 << 12));
-}
-
-/**
* ixgbe_read_pe - Read register from port expander
* @hw: pointer to hardware structure
* @reg: register number to read
@@ -326,13 +255,6 @@ static void ixgbe_check_cs4227(struct ixgbe_hw *hw)
return;
}
- /* Is the CS4227 working correctly? */
- status = ixgbe_get_cs4227_status(hw);
- if (status) {
- hw_err(hw, "CS4227 status failed: %d", status);
- goto out;
- }
-
/* Record completion for next time. */
status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH,
IXGBE_CS4227_RESET_COMPLETE);
@@ -1257,31 +1179,71 @@ ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
if (status)
return status;
- /* Configure CS4227 LINE side to 10G SR. */
- slice = IXGBE_CS4227_LINE_SPARE22_MSB + (hw->bus.lan_id << 12);
- value = IXGBE_CS4227_SPEED_10G;
- status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice,
- value);
-
- /* Configure CS4227 for HOST connection rate then type. */
- slice = IXGBE_CS4227_HOST_SPARE22_MSB + (hw->bus.lan_id << 12);
- value = speed & IXGBE_LINK_SPEED_10GB_FULL ?
- IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G;
- status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice,
- value);
+ if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
+ /* Configure CS4227 LINE side to 10G SR. */
+ slice = IXGBE_CS4227_LINE_SPARE22_MSB + (hw->bus.lan_id << 12);
+ value = IXGBE_CS4227_SPEED_10G;
+ status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
+ slice, value);
+ if (status)
+ goto i2c_err;
- slice = IXGBE_CS4227_HOST_SPARE24_LSB + (hw->bus.lan_id << 12);
- if (setup_linear)
- value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1;
- else
+ slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12);
value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
- status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice,
- value);
+ status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
+ slice, value);
+ if (status)
+ goto i2c_err;
+
+ /* Configure CS4227 for HOST connection rate then type. */
+ slice = IXGBE_CS4227_HOST_SPARE22_MSB + (hw->bus.lan_id << 12);
+ value = speed & IXGBE_LINK_SPEED_10GB_FULL ?
+ IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G;
+ status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
+ slice, value);
+ if (status)
+ goto i2c_err;
- /* If internal link mode is XFI, then setup XFI internal link. */
- if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE))
+ slice = IXGBE_CS4227_HOST_SPARE24_LSB + (hw->bus.lan_id << 12);
+ if (setup_linear)
+ value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1;
+ else
+ value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
+ status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
+ slice, value);
+ if (status)
+ goto i2c_err;
+
+ /* Setup XFI internal link. */
status = ixgbe_setup_ixfi_x550em(hw, &speed);
+ if (status) {
+ hw_dbg(hw, "setup_ixfi failed with %d\n", status);
+ return status;
+ }
+ } else {
+ /* Configure internal PHY for KR/KX. */
+ status = ixgbe_setup_kr_speed_x550em(hw, speed);
+ if (status) {
+ hw_dbg(hw, "setup_kr_speed failed with %d\n", status);
+ return status;
+ }
+ /* Configure CS4227 LINE side to proper mode. */
+ slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12);
+ if (setup_linear)
+ value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1;
+ else
+ value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
+ status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
+ slice, value);
+ if (status)
+ goto i2c_err;
+ }
+
+ return 0;
+
+i2c_err:
+ hw_dbg(hw, "combined i2c access failed with %d\n", status);
return status;
}
@@ -1482,7 +1444,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
IXGBE_MDIO_GLOBAL_ALARM_1_INT)))
return status;
- /* High temperature failure alarm triggered */
+ /* Global alarm triggered */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
&reg);
@@ -1496,6 +1458,21 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
ixgbe_set_copper_phy_power(hw, false);
return IXGBE_ERR_OVERTEMP;
}
+ if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) {
+ /* device fault alarm triggered */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ &reg);
+ if (status)
+ return status;
+
+ /* if device fault was due to high temp alarm handle and exit */
+ if (reg == IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP) {
+ /* power down the PHY in case the PHY FW didn't */
+ ixgbe_set_copper_phy_power(hw, false);
+ return IXGBE_ERR_OVERTEMP;
+ }
+ }
/* Vendor alarm 2 triggered */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
@@ -1549,14 +1526,15 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
if (status)
return status;
- /* Enables high temperature failure alarm */
+ /* Enable high temperature failure and global fault alarms */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
&reg);
if (status)
return status;
- reg |= IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN;
+ reg |= (IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN |
+ IXGBE_MDIO_GLOBAL_INT_DEV_FAULT_EN);
status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
@@ -1765,6 +1743,12 @@ static s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
return IXGBE_ERR_CONFIG;
+ if (hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) {
+ speed = IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ return ixgbe_setup_kr_speed_x550em(hw, speed);
+ }
+
/* If link is not up, then there is no setup necessary so return */
status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
if (status)
@@ -1873,10 +1857,6 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
u32 save_autoneg;
bool link_up;
- /* SW LPLU not required on later HW revisions. */
- if (IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))
- return 0;
-
/* If blocked by MNG FW, then don't restart AN */
if (ixgbe_check_reset_blocked(hw))
return 0;
@@ -1969,7 +1949,6 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
{
struct ixgbe_phy_info *phy = &hw->phy;
- ixgbe_link_speed speed;
s32 ret_val;
hw->mac.ops.set_lan_id(hw);
@@ -1982,13 +1961,6 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
* to determine internal PHY mode.
*/
phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
-
- /* If internal PHY mode is KR, then initialize KR link */
- if (phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) {
- speed = IXGBE_LINK_SPEED_10GB_FULL |
- IXGBE_LINK_SPEED_1GB_FULL;
- ret_val = ixgbe_setup_kr_speed_x550em(hw, speed);
- }
}
/* Identify the PHY or SFP module */
@@ -2020,18 +1992,13 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
/* If internal link mode is XFI, then setup iXFI internal link,
* else setup KR now.
*/
- if (!(phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
- phy->ops.setup_internal_link =
- ixgbe_setup_internal_phy_t_x550em;
- } else {
- speed = IXGBE_LINK_SPEED_10GB_FULL |
- IXGBE_LINK_SPEED_1GB_FULL;
- ret_val = ixgbe_setup_kr_speed_x550em(hw, speed);
- }
+ phy->ops.setup_internal_link =
+ ixgbe_setup_internal_phy_t_x550em;
/* setup SW LPLU only for first revision */
- if (!(IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw,
- IXGBE_FUSES0_GROUP(0))))
+ if (hw->mac.type == ixgbe_mac_X550EM_x &&
+ !(IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)) &
+ IXGBE_FUSES0_REV_MASK))
phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em;
phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em;
@@ -2176,13 +2143,14 @@ mac_reset_top:
ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
IXGBE_WRITE_FLUSH(hw);
+ usleep_range(1000, 1200);
/* Poll for reset bit to self-clear meaning reset is complete */
for (i = 0; i < 10; i++) {
- udelay(1);
ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
if (!(ctrl & IXGBE_CTRL_RST_MASK))
break;
+ udelay(1);
}
if (ctrl & IXGBE_CTRL_RST_MASK) {