diff options
Diffstat (limited to 'drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c')
| -rw-r--r-- | drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 117 |
1 files changed, 59 insertions, 58 deletions
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index d5c92e43f89e..587def69a6f7 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -6081,9 +6081,9 @@ static void mvpp2_port_copy_mac_addr(struct net_device *dev, struct mvpp2 *priv, char hw_mac_addr[ETH_ALEN] = {0}; char fw_mac_addr[ETH_ALEN]; - if (fwnode_get_mac_address(fwnode, fw_mac_addr, ETH_ALEN)) { + if (!fwnode_get_mac_address(fwnode, fw_mac_addr)) { *mac_from = "firmware node"; - ether_addr_copy(dev->dev_addr, fw_mac_addr); + eth_hw_addr_set(dev, fw_mac_addr); return; } @@ -6091,7 +6091,7 @@ static void mvpp2_port_copy_mac_addr(struct net_device *dev, struct mvpp2 *priv, mvpp21_get_mac_address(port, hw_mac_addr); if (is_valid_ether_addr(hw_mac_addr)) { *mac_from = "hardware"; - ether_addr_copy(dev->dev_addr, hw_mac_addr); + eth_hw_addr_set(dev, hw_mac_addr); return; } } @@ -6261,32 +6261,13 @@ static void mvpp2_phylink_validate(struct phylink_config *config, struct mvpp2_port *port = mvpp2_phylink_to_port(config); __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - /* Invalid combinations */ - switch (state->interface) { - case PHY_INTERFACE_MODE_10GBASER: - case PHY_INTERFACE_MODE_XAUI: - if (!mvpp2_port_supports_xlg(port)) - goto empty_set; - break; - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_TXID: - if (!mvpp2_port_supports_rgmii(port)) - goto empty_set; - break; - case PHY_INTERFACE_MODE_1000BASEX: - case PHY_INTERFACE_MODE_2500BASEX: - /* When in 802.3z mode, we must have AN enabled: - * Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... - * When <PortType> = 1 (1000BASE-X) this field must be set to 1. - */ - if (!phylink_test(state->advertising, Autoneg)) - goto empty_set; - break; - default: - break; - } + /* When in 802.3z mode, we must have AN enabled: + * Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... + * When <PortType> = 1 (1000BASE-X) this field must be set to 1. + */ + if (phy_interface_mode_is_8023z(state->interface) && + !phylink_test(state->advertising, Autoneg)) + goto empty_set; phylink_set(mask, Autoneg); phylink_set_port_modes(mask); @@ -6299,19 +6280,12 @@ static void mvpp2_phylink_validate(struct phylink_config *config, switch (state->interface) { case PHY_INTERFACE_MODE_10GBASER: case PHY_INTERFACE_MODE_XAUI: - case PHY_INTERFACE_MODE_NA: if (mvpp2_port_supports_xlg(port)) { - phylink_set(mask, 10000baseT_Full); - phylink_set(mask, 10000baseCR_Full); - phylink_set(mask, 10000baseSR_Full); - phylink_set(mask, 10000baseLR_Full); - phylink_set(mask, 10000baseLRM_Full); - phylink_set(mask, 10000baseER_Full); + phylink_set_10g_modes(mask); phylink_set(mask, 10000baseKR_Full); } - if (state->interface != PHY_INTERFACE_MODE_NA) - break; - fallthrough; + break; + case PHY_INTERFACE_MODE_RGMII: case PHY_INTERFACE_MODE_RGMII_ID: case PHY_INTERFACE_MODE_RGMII_RXID: @@ -6323,35 +6297,28 @@ static void mvpp2_phylink_validate(struct phylink_config *config, phylink_set(mask, 100baseT_Full); phylink_set(mask, 1000baseT_Full); phylink_set(mask, 1000baseX_Full); - if (state->interface != PHY_INTERFACE_MODE_NA) - break; - fallthrough; + break; + case PHY_INTERFACE_MODE_1000BASEX: + phylink_set(mask, 1000baseT_Full); + phylink_set(mask, 1000baseX_Full); + break; + case PHY_INTERFACE_MODE_2500BASEX: - if (port->comphy || - state->interface != PHY_INTERFACE_MODE_2500BASEX) { - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseX_Full); - } - if (port->comphy || - state->interface == PHY_INTERFACE_MODE_2500BASEX) { - phylink_set(mask, 2500baseT_Full); - phylink_set(mask, 2500baseX_Full); - } + phylink_set(mask, 2500baseT_Full); + phylink_set(mask, 2500baseX_Full); break; + default: goto empty_set; } - bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS); - bitmap_and(state->advertising, state->advertising, mask, - __ETHTOOL_LINK_MODE_MASK_NBITS); - - phylink_helper_basex_speed(state); + linkmode_and(supported, supported, mask); + linkmode_and(state->advertising, state->advertising, mask); return; empty_set: - bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + linkmode_zero(supported); } static void mvpp2_xlg_config(struct mvpp2_port *port, unsigned int mode, @@ -6943,6 +6910,40 @@ static int mvpp2_port_probe(struct platform_device *pdev, port->phylink_config.dev = &dev->dev; port->phylink_config.type = PHYLINK_NETDEV; + if (mvpp2_port_supports_xlg(port)) { + __set_bit(PHY_INTERFACE_MODE_10GBASER, + port->phylink_config.supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_XAUI, + port->phylink_config.supported_interfaces); + } + + if (mvpp2_port_supports_rgmii(port)) + phy_interface_set_rgmii(port->phylink_config.supported_interfaces); + + if (comphy) { + /* If a COMPHY is present, we can support any of the + * serdes modes and switch between them. + */ + __set_bit(PHY_INTERFACE_MODE_SGMII, + port->phylink_config.supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, + port->phylink_config.supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_2500BASEX, + port->phylink_config.supported_interfaces); + } else if (phy_mode == PHY_INTERFACE_MODE_2500BASEX) { + /* No COMPHY, with only 2500BASE-X mode supported */ + __set_bit(PHY_INTERFACE_MODE_2500BASEX, + port->phylink_config.supported_interfaces); + } else if (phy_mode == PHY_INTERFACE_MODE_1000BASEX || + phy_mode == PHY_INTERFACE_MODE_SGMII) { + /* No COMPHY, we can switch between 1000BASE-X and SGMII + */ + __set_bit(PHY_INTERFACE_MODE_1000BASEX, + port->phylink_config.supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_SGMII, + port->phylink_config.supported_interfaces); + } + phylink = phylink_create(&port->phylink_config, port_fwnode, phy_mode, &mvpp2_phylink_ops); if (IS_ERR(phylink)) { |