diff options
Diffstat (limited to 'drivers/net/ethernet/mellanox/mlxsw/reg.h')
| -rw-r--r-- | drivers/net/ethernet/mellanox/mlxsw/reg.h | 175 |
1 files changed, 151 insertions, 24 deletions
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 8165bf31a99a..ae556ddd7624 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -97,14 +97,6 @@ MLXSW_ITEM32(reg, sspr, m, 0x00, 31, 1); */ MLXSW_ITEM32_LP(reg, sspr, 0x00, 16, 0x00, 12); -/* reg_sspr_sub_port - * Virtual port within the physical port. - * Should be set to 0 when virtual ports are not enabled on the port. - * - * Access: RW - */ -MLXSW_ITEM32(reg, sspr, sub_port, 0x00, 8, 8); - /* reg_sspr_system_port * Unique identifier within the stacking domain that represents all the ports * that are available in the system (external ports). @@ -120,7 +112,6 @@ static inline void mlxsw_reg_sspr_pack(char *payload, u16 local_port) MLXSW_REG_ZERO(sspr, payload); mlxsw_reg_sspr_m_set(payload, 1); mlxsw_reg_sspr_local_port_set(payload, local_port); - mlxsw_reg_sspr_sub_port_set(payload, 0); mlxsw_reg_sspr_system_port_set(payload, local_port); } @@ -2799,6 +2790,78 @@ static inline void mlxsw_reg_ptar_unpack(char *payload, char *tcam_region_info) mlxsw_reg_ptar_tcam_region_info_memcpy_from(payload, tcam_region_info); } +/* PPRR - Policy-Engine Port Range Register + * ---------------------------------------- + * This register is used for configuring port range identification. + */ +#define MLXSW_REG_PPRR_ID 0x3008 +#define MLXSW_REG_PPRR_LEN 0x14 + +MLXSW_REG_DEFINE(pprr, MLXSW_REG_PPRR_ID, MLXSW_REG_PPRR_LEN); + +/* reg_pprr_ipv4 + * Apply port range register to IPv4 packets. + * Access: RW + */ +MLXSW_ITEM32(reg, pprr, ipv4, 0x00, 31, 1); + +/* reg_pprr_ipv6 + * Apply port range register to IPv6 packets. + * Access: RW + */ +MLXSW_ITEM32(reg, pprr, ipv6, 0x00, 30, 1); + +/* reg_pprr_src + * Apply port range register to source L4 ports. + * Access: RW + */ +MLXSW_ITEM32(reg, pprr, src, 0x00, 29, 1); + +/* reg_pprr_dst + * Apply port range register to destination L4 ports. + * Access: RW + */ +MLXSW_ITEM32(reg, pprr, dst, 0x00, 28, 1); + +/* reg_pprr_tcp + * Apply port range register to TCP packets. + * Access: RW + */ +MLXSW_ITEM32(reg, pprr, tcp, 0x00, 27, 1); + +/* reg_pprr_udp + * Apply port range register to UDP packets. + * Access: RW + */ +MLXSW_ITEM32(reg, pprr, udp, 0x00, 26, 1); + +/* reg_pprr_register_index + * Index of Port Range Register being accessed. + * Range is 0..cap_max_acl_l4_port_range-1. + * Access: Index + */ +MLXSW_ITEM32(reg, pprr, register_index, 0x00, 0, 8); + +/* reg_prrr_port_range_min + * Minimum port range for comparison. + * Match is defined as: + * port_range_min <= packet_port <= port_range_max. + * Access: RW + */ +MLXSW_ITEM32(reg, pprr, port_range_min, 0x04, 16, 16); + +/* reg_prrr_port_range_max + * Maximum port range for comparison. + * Access: RW + */ +MLXSW_ITEM32(reg, pprr, port_range_max, 0x04, 0, 16); + +static inline void mlxsw_reg_pprr_pack(char *payload, u8 register_index) +{ + MLXSW_REG_ZERO(pprr, payload); + mlxsw_reg_pprr_register_index_set(payload, register_index); +} + /* PPBS - Policy-Engine Policy Based Switching Register * ---------------------------------------------------- * This register retrieves and sets Policy Based Switching Table entries. @@ -9568,18 +9631,10 @@ static inline void mlxsw_reg_mtbr_temp_unpack(char *payload, int rec_ind, */ #define MLXSW_REG_MCIA_ID 0x9014 -#define MLXSW_REG_MCIA_LEN 0x40 +#define MLXSW_REG_MCIA_LEN 0x94 MLXSW_REG_DEFINE(mcia, MLXSW_REG_MCIA_ID, MLXSW_REG_MCIA_LEN); -/* reg_mcia_l - * Lock bit. Setting this bit will lock the access to the specific - * cable. Used for updating a full page in a cable EPROM. Any access - * other then subsequence writes will fail while the port is locked. - * Access: RW - */ -MLXSW_ITEM32(reg, mcia, l, 0x00, 31, 1); - /* reg_mcia_module * Module number. * Access: Index @@ -9644,7 +9699,6 @@ MLXSW_ITEM32(reg, mcia, size, 0x08, 0, 16); #define MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH 256 #define MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH 128 -#define MLXSW_REG_MCIA_EEPROM_SIZE 48 #define MLXSW_REG_MCIA_I2C_ADDR_LOW 0x50 #define MLXSW_REG_MCIA_I2C_ADDR_HIGH 0x51 #define MLXSW_REG_MCIA_PAGE0_LO_OFF 0xa0 @@ -9681,7 +9735,7 @@ enum mlxsw_reg_mcia_eeprom_module_info { * Bytes to read/write. * Access: RW */ -MLXSW_ITEM_BUF(reg, mcia, eeprom, 0x10, MLXSW_REG_MCIA_EEPROM_SIZE); +MLXSW_ITEM_BUF(reg, mcia, eeprom, 0x10, 128); /* This is used to access the optional upper pages (1-3) in the QSFP+ * memory map. Page 1 is available on offset 256 through 383, page 2 - @@ -9692,14 +9746,12 @@ MLXSW_ITEM_BUF(reg, mcia, eeprom, 0x10, MLXSW_REG_MCIA_EEPROM_SIZE); MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH + 1) static inline void mlxsw_reg_mcia_pack(char *payload, u8 slot_index, u8 module, - u8 lock, u8 page_number, - u16 device_addr, u8 size, + u8 page_number, u16 device_addr, u8 size, u8 i2c_device_addr) { MLXSW_REG_ZERO(mcia, payload); mlxsw_reg_mcia_slot_set(payload, slot_index); mlxsw_reg_mcia_module_set(payload, module); - mlxsw_reg_mcia_l_set(payload, lock); mlxsw_reg_mcia_page_number_set(payload, page_number); mlxsw_reg_mcia_device_address_set(payload, device_addr); mlxsw_reg_mcia_size_set(payload, size); @@ -10509,6 +10561,79 @@ static inline void mlxsw_reg_mcda_pack(char *payload, u32 update_handle, mlxsw_reg_mcda_data_set(payload, i, *(u32 *) &data[i * 4]); } +/* MCAM - Management Capabilities Mask Register + * -------------------------------------------- + * Reports the device supported management features. + */ +#define MLXSW_REG_MCAM_ID 0x907F +#define MLXSW_REG_MCAM_LEN 0x48 + +MLXSW_REG_DEFINE(mcam, MLXSW_REG_MCAM_ID, MLXSW_REG_MCAM_LEN); + +enum mlxsw_reg_mcam_feature_group { + /* Enhanced features. */ + MLXSW_REG_MCAM_FEATURE_GROUP_ENHANCED_FEATURES, +}; + +/* reg_mcam_feature_group + * Feature list mask index. + * Access: Index + */ +MLXSW_ITEM32(reg, mcam, feature_group, 0x00, 16, 8); + +enum mlxsw_reg_mcam_mng_feature_cap_mask_bits { + /* If set, MCIA supports 128 bytes payloads. Otherwise, 48 bytes. */ + MLXSW_REG_MCAM_MCIA_128B = 34, +}; + +#define MLXSW_REG_BYTES_PER_DWORD 0x4 + +/* reg_mcam_mng_feature_cap_mask + * Supported port's enhanced features. + * Based on feature_group index. + * When bit is set, the feature is supported in the device. + * Access: RO + */ +#define MLXSW_REG_MCAM_MNG_FEATURE_CAP_MASK_DWORD(_dw_num, _offset) \ + MLXSW_ITEM_BIT_ARRAY(reg, mcam, mng_feature_cap_mask_dw##_dw_num, \ + _offset, MLXSW_REG_BYTES_PER_DWORD, 1) + +/* The access to the bits in the field 'mng_feature_cap_mask' is not same to + * other mask fields in other registers. In most of the cases bit #0 is the + * first one in the last dword. In MCAM register, the first dword contains bits + * #0-#31 and so on, so the access to the bits is simpler using bit array per + * dword. Declare each dword of 'mng_feature_cap_mask' field separately. + */ +MLXSW_REG_MCAM_MNG_FEATURE_CAP_MASK_DWORD(0, 0x28); +MLXSW_REG_MCAM_MNG_FEATURE_CAP_MASK_DWORD(1, 0x2C); +MLXSW_REG_MCAM_MNG_FEATURE_CAP_MASK_DWORD(2, 0x30); +MLXSW_REG_MCAM_MNG_FEATURE_CAP_MASK_DWORD(3, 0x34); + +static inline void +mlxsw_reg_mcam_pack(char *payload, enum mlxsw_reg_mcam_feature_group feat_group) +{ + MLXSW_REG_ZERO(mcam, payload); + mlxsw_reg_mcam_feature_group_set(payload, feat_group); +} + +static inline void +mlxsw_reg_mcam_unpack(char *payload, + enum mlxsw_reg_mcam_mng_feature_cap_mask_bits bit, + bool *p_mng_feature_cap_val) +{ + int offset = bit % (MLXSW_REG_BYTES_PER_DWORD * BITS_PER_BYTE); + int dword = bit / (MLXSW_REG_BYTES_PER_DWORD * BITS_PER_BYTE); + u8 (*getters[])(const char *, u16) = { + mlxsw_reg_mcam_mng_feature_cap_mask_dw0_get, + mlxsw_reg_mcam_mng_feature_cap_mask_dw1_get, + mlxsw_reg_mcam_mng_feature_cap_mask_dw2_get, + mlxsw_reg_mcam_mng_feature_cap_mask_dw3_get, + }; + + if (!WARN_ON_ONCE(dword >= ARRAY_SIZE(getters))) + *p_mng_feature_cap_val = getters[dword](payload, offset); +} + /* MPSC - Monitoring Packet Sampling Configuration Register * -------------------------------------------------------- * MPSC Register is used to configure the Packet Sampling mechanism. @@ -12819,6 +12944,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = { MLXSW_REG(pacl), MLXSW_REG(pagt), MLXSW_REG(ptar), + MLXSW_REG(pprr), MLXSW_REG(ppbs), MLXSW_REG(prcr), MLXSW_REG(pefa), @@ -12901,10 +13027,11 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = { MLXSW_REG(mcion), MLXSW_REG(mtpps), MLXSW_REG(mtutc), - MLXSW_REG(mpsc), MLXSW_REG(mcqi), MLXSW_REG(mcc), MLXSW_REG(mcda), + MLXSW_REG(mcam), + MLXSW_REG(mpsc), MLXSW_REG(mgpc), MLXSW_REG(mprs), MLXSW_REG(mogcr), |