diff options
Diffstat (limited to 'drivers/net/ethernet/neterion')
| -rw-r--r-- | drivers/net/ethernet/neterion/s2io.c | 10 | ||||
| -rw-r--r-- | drivers/net/ethernet/neterion/vxge/vxge-config.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/neterion/vxge/vxge-main.c | 36 |
3 files changed, 19 insertions, 29 deletions
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c index 9cfcd5500462..0b017d4f5c08 100644 --- a/drivers/net/ethernet/neterion/s2io.c +++ b/drivers/net/ethernet/neterion/s2io.c @@ -1101,6 +1101,8 @@ static int s2io_print_pci_mode(struct s2io_nic *nic) * @nic: device private variable * @link: link status (UP/DOWN) used to enable/disable continuous * transmit interrupts + * @may_sleep: parameter indicates if sleeping when waiting for + * command complete * Description: The function configures transmit traffic interrupts * Return Value: SUCCESS on success and * '-1' on failure @@ -2743,7 +2745,7 @@ static int s2io_chk_rx_buffers(struct s2io_nic *nic, struct ring_info *ring) } /** - * s2io_poll - Rx interrupt handler for NAPI support + * s2io_poll_msix - Rx interrupt handler for NAPI support * @napi : pointer to the napi structure. * @budget : The number of packets that were budgeted to be processed * during one pass through the 'Poll" function. @@ -3323,6 +3325,8 @@ static void s2io_updt_xpak_counter(struct net_device *dev) * @addr: address * @busy_bit: bit to check for busy * @bit_state: state to check + * @may_sleep: parameter indicates if sleeping when waiting for + * command complete * Description: Function that waits for a command to Write into RMAC * ADDR DATA registers to be completed and returns either success or * error depending on whether the command was complete or not. @@ -4868,6 +4872,8 @@ static struct net_device_stats *s2io_get_stats(struct net_device *dev) /** * s2io_set_multicast - entry point for multicast address enable/disable. * @dev : pointer to the device structure + * @may_sleep: parameter indicates if sleeping when waiting for command + * complete * Description: * This function is a driver entry point which gets called by the kernel * whenever multicast addresses must be enabled/disabled. This also gets @@ -5288,7 +5294,7 @@ s2io_ethtool_set_link_ksettings(struct net_device *dev, } /** - * s2io_ethtol_get_link_ksettings - Return link specific information. + * s2io_ethtool_get_link_ksettings - Return link specific information. * @dev: pointer to netdev * @cmd : pointer to the structure with parameters given by ethtool * to return link information. diff --git a/drivers/net/ethernet/neterion/vxge/vxge-config.c b/drivers/net/ethernet/neterion/vxge/vxge-config.c index 5162b938a1ac..38a273c4d593 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-config.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-config.c @@ -4884,7 +4884,7 @@ vpath_open_exit1: } /** - * vxge_hw_vpath_rx_doorbell_post - Close the handle got from previous vpath + * vxge_hw_vpath_rx_doorbell_init - Close the handle got from previous vpath * (vpath) open * @vp: Handle got from previous vpath open * diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c index 87892bd992b1..82eef4c72f01 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-main.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c @@ -87,7 +87,7 @@ static unsigned int bw_percentage[VXGE_HW_MAX_VIRTUAL_PATHS] = module_param_array(bw_percentage, uint, NULL, 0); static struct vxge_drv_config *driver_config; -static enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev); +static void vxge_reset_all_vpaths(struct vxgedev *vdev); static inline int is_vxge_card_up(struct vxgedev *vdev) { @@ -1606,7 +1606,6 @@ static void vxge_config_ci_for_tti_rti(struct vxgedev *vdev) static int do_vxge_reset(struct vxgedev *vdev, int event) { - enum vxge_hw_status status; int ret = 0, vp_id, i; vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); @@ -1709,14 +1708,7 @@ static int do_vxge_reset(struct vxgedev *vdev, int event) netif_tx_stop_all_queues(vdev->ndev); if (event == VXGE_LL_FULL_RESET) { - status = vxge_reset_all_vpaths(vdev); - if (status != VXGE_HW_OK) { - vxge_debug_init(VXGE_ERR, - "fatal: %s: can not reset vpaths", - vdev->ndev->name); - ret = -EPERM; - goto out; - } + vxge_reset_all_vpaths(vdev); } if (event == VXGE_LL_COMPL_RESET) { @@ -1799,7 +1791,7 @@ static void vxge_reset(struct work_struct *work) } /** - * vxge_poll - Receive handler when Receive Polling is used. + * vxge_poll_msix - Receive handler when Receive Polling is used. * @napi: pointer to the napi structure. * @budget: Number of packets budgeted to be processed in this iteration. * @@ -1969,9 +1961,8 @@ static enum vxge_hw_status vxge_rth_configure(struct vxgedev *vdev) } /* reset vpaths */ -static enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev) +static void vxge_reset_all_vpaths(struct vxgedev *vdev) { - enum vxge_hw_status status = VXGE_HW_OK; struct vxge_vpath *vpath; int i; @@ -1986,18 +1977,16 @@ static enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev) "vxge_hw_vpath_recover_" "from_reset failed for vpath: " "%d", i); - return status; + return; } } else { vxge_debug_init(VXGE_ERR, "vxge_hw_vpath_reset failed for " "vpath:%d", i); - return status; + return; } } } - - return status; } /* close vpaths */ @@ -2676,11 +2665,7 @@ static int vxge_set_features(struct net_device *dev, netdev_features_t features) /* !netif_running() ensured by vxge_fix_features() */ vdev->devh->config.rth_en = !!(features & NETIF_F_RXHASH); - if (vxge_reset_all_vpaths(vdev) != VXGE_HW_OK) { - dev->features = features ^ NETIF_F_RXHASH; - vdev->devh->config.rth_en = !!(dev->features & NETIF_F_RXHASH); - return -EIO; - } + vxge_reset_all_vpaths(vdev); return 0; } @@ -3693,10 +3678,9 @@ static int vxge_config_vpaths(struct vxge_hw_device_config *device_config, driver_config->vpath_per_dev = 1; for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) - if (!vxge_bVALn(vpath_mask, i, 1)) - continue; - else + if (vxge_bVALn(vpath_mask, i, 1)) default_no_vpath++; + if (default_no_vpath < driver_config->vpath_per_dev) driver_config->vpath_per_dev = default_no_vpath; @@ -4752,7 +4736,7 @@ _exit0: } /** - * vxge_rem_nic - Free the PCI device + * vxge_remove - Free the PCI device * @pdev: structure containing the PCI related information of the device. * Description: This function is called by the Pci subsystem to release a * PCI device and free up all resource held up by the device. |