diff options
Diffstat (limited to 'drivers/net/ethernet/qlogic/qed/qed_l2.h')
| -rw-r--r-- | drivers/net/ethernet/qlogic/qed/qed_l2.h | 135 |
1 files changed, 68 insertions, 67 deletions
diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.h b/drivers/net/ethernet/qlogic/qed/qed_l2.h index 8eceeebb1a7b..a538cf478c14 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.h +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.h @@ -92,18 +92,18 @@ struct qed_filter_mcast { }; /** - * @brief qed_eth_rx_queue_stop - This ramrod closes an Rx queue + * qed_eth_rx_queue_stop(): This ramrod closes an Rx queue. * - * @param p_hwfn - * @param p_rxq Handler of queue to close - * @param eq_completion_only If True completion will be on - * EQe, if False completion will be - * on EQe if p_hwfn opaque - * different from the RXQ opaque - * otherwise on CQe. - * @param cqe_completion If True completion will be - * receive on CQe. - * @return int + * @p_hwfn: HW device data. + * @p_rxq: Handler of queue to close + * @eq_completion_only: If True completion will be on + * EQe, if False completion will be + * on EQe if p_hwfn opaque + * different from the RXQ opaque + * otherwise on CQe. + * @cqe_completion: If True completion will be receive on CQe. + * + * Return: Int. */ int qed_eth_rx_queue_stop(struct qed_hwfn *p_hwfn, @@ -111,12 +111,12 @@ qed_eth_rx_queue_stop(struct qed_hwfn *p_hwfn, bool eq_completion_only, bool cqe_completion); /** - * @brief qed_eth_tx_queue_stop - closes a Tx queue + * qed_eth_tx_queue_stop(): Closes a Tx queue. * - * @param p_hwfn - * @param p_txq - handle to Tx queue needed to be closed + * @p_hwfn: HW device data. + * @p_txq: handle to Tx queue needed to be closed. * - * @return int + * Return: Int. */ int qed_eth_tx_queue_stop(struct qed_hwfn *p_hwfn, void *p_txq); @@ -146,7 +146,6 @@ struct qed_sp_vport_start_params { int qed_sp_eth_vport_start(struct qed_hwfn *p_hwfn, struct qed_sp_vport_start_params *p_params); - struct qed_filter_accept_flags { u8 update_rx_mode_config; u8 update_tx_mode_config; @@ -205,16 +204,15 @@ int qed_sp_vport_update(struct qed_hwfn *p_hwfn, struct qed_spq_comp_cb *p_comp_data); /** - * @brief qed_sp_vport_stop - - * - * This ramrod closes a VPort after all its RX and TX queues are terminated. - * An Assert is generated if any queues are left open. + * qed_sp_vport_stop: This ramrod closes a VPort after all its + * RX and TX queues are terminated. + * An Assert is generated if any queues are left open. * - * @param p_hwfn - * @param opaque_fid - * @param vport_id VPort ID + * @p_hwfn: HW device data. + * @opaque_fid: Opaque FID + * @vport_id: VPort ID. * - * @return int + * Return: Int. */ int qed_sp_vport_stop(struct qed_hwfn *p_hwfn, u16 opaque_fid, u8 vport_id); @@ -225,22 +223,21 @@ int qed_sp_eth_filter_ucast(struct qed_hwfn *p_hwfn, struct qed_spq_comp_cb *p_comp_data); /** - * @brief qed_sp_rx_eth_queues_update - + * qed_sp_eth_rx_queues_update(): This ramrod updates an RX queue. + * It is used for setting the active state + * of the queue and updating the TPA and + * SGE parameters. + * @p_hwfn: HW device data. + * @pp_rxq_handlers: An array of queue handlers to be updated. + * @num_rxqs: number of queues to update. + * @complete_cqe_flg: Post completion to the CQE Ring if set. + * @complete_event_flg: Post completion to the Event Ring if set. + * @comp_mode: Comp mode. + * @p_comp_data: Pointer Comp data. * - * This ramrod updates an RX queue. It is used for setting the active state - * of the queue and updating the TPA and SGE parameters. + * Return: Int. * - * @note At the moment - only used by non-linux VFs. - * - * @param p_hwfn - * @param pp_rxq_handlers An array of queue handlers to be updated. - * @param num_rxqs number of queues to update. - * @param complete_cqe_flg Post completion to the CQE Ring if set - * @param complete_event_flg Post completion to the Event Ring if set - * @param comp_mode - * @param p_comp_data - * - * @return int + * Note At the moment - only used by non-linux VFs. */ int @@ -257,30 +254,32 @@ void qed_get_vport_stats(struct qed_dev *cdev, struct qed_eth_stats *stats); void qed_reset_vport_stats(struct qed_dev *cdev); /** - * *@brief qed_arfs_mode_configure - - * - **Enable or disable rfs mode. It must accept atleast one of tcp or udp true - **and atleast one of ipv4 or ipv6 true to enable rfs mode. + * qed_arfs_mode_configure(): Enable or disable rfs mode. + * It must accept at least one of tcp or udp true + * and at least one of ipv4 or ipv6 true to enable + * rfs mode. * - **@param p_hwfn - **@param p_ptt - **@param p_cfg_params - arfs mode configuration parameters. + * @p_hwfn: HW device data. + * @p_ptt: P_ptt. + * @p_cfg_params: arfs mode configuration parameters. * + * Return. Void. */ void qed_arfs_mode_configure(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, struct qed_arfs_config_params *p_cfg_params); /** - * @brief - qed_configure_rfs_ntuple_filter + * qed_configure_rfs_ntuple_filter(): This ramrod should be used to add + * or remove arfs hw filter * - * This ramrod should be used to add or remove arfs hw filter + * @p_hwfn: HW device data. + * @p_cb: Used for QED_SPQ_MODE_CB,where client would initialize + * it with cookie and callback function address, if not + * using this mode then client must pass NULL. + * @p_params: Pointer to params. * - * @params p_hwfn - * @params p_cb - Used for QED_SPQ_MODE_CB,where client would initialize - * it with cookie and callback function address, if not - * using this mode then client must pass NULL. - * @params p_params + * Return: Void. */ int qed_configure_rfs_ntuple_filter(struct qed_hwfn *p_hwfn, @@ -374,16 +373,17 @@ qed_sp_eth_vport_start(struct qed_hwfn *p_hwfn, struct qed_sp_vport_start_params *p_params); /** - * @brief - Starts an Rx queue, when queue_cid is already prepared + * qed_eth_rxq_start_ramrod(): Starts an Rx queue, when queue_cid is + * already prepared * - * @param p_hwfn - * @param p_cid - * @param bd_max_bytes - * @param bd_chain_phys_addr - * @param cqe_pbl_addr - * @param cqe_pbl_size + * @p_hwfn: HW device data. + * @p_cid: Pointer CID. + * @bd_max_bytes: Max bytes. + * @bd_chain_phys_addr: Chain physcial address. + * @cqe_pbl_addr: PBL address. + * @cqe_pbl_size: PBL size. * - * @return int + * Return: Int. */ int qed_eth_rxq_start_ramrod(struct qed_hwfn *p_hwfn, @@ -393,15 +393,16 @@ qed_eth_rxq_start_ramrod(struct qed_hwfn *p_hwfn, dma_addr_t cqe_pbl_addr, u16 cqe_pbl_size); /** - * @brief - Starts a Tx queue, where queue_cid is already prepared + * qed_eth_txq_start_ramrod(): Starts a Tx queue, where queue_cid is + * already prepared * - * @param p_hwfn - * @param p_cid - * @param pbl_addr - * @param pbl_size - * @param p_pq_params - parameters for choosing the PQ for this Tx queue + * @p_hwfn: HW device data. + * @p_cid: Pointer CID. + * @pbl_addr: PBL address. + * @pbl_size: PBL size. + * @pq_id: Parameters for choosing the PQ for this Tx queue. * - * @return int + * Return: Int. */ int qed_eth_txq_start_ramrod(struct qed_hwfn *p_hwfn, |