diff options
Diffstat (limited to 'drivers/net/ethernet/renesas/ravb_main.c')
| -rw-r--r-- | drivers/net/ethernet/renesas/ravb_main.c | 130 |
1 files changed, 85 insertions, 45 deletions
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index c70cff80cc99..8649b3e90edb 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -66,16 +66,27 @@ int ravb_wait(struct net_device *ndev, enum ravb_reg reg, u32 mask, u32 value) return -ETIMEDOUT; } -static int ravb_config(struct net_device *ndev) +static int ravb_set_opmode(struct net_device *ndev, u32 opmode) { + u32 csr_ops = 1U << (opmode & CCC_OPC); + u32 ccc_mask = CCC_OPC; int error; - /* Set config mode */ - ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG); - /* Check if the operating mode is changed to the config mode */ - error = ravb_wait(ndev, CSR, CSR_OPS, CSR_OPS_CONFIG); - if (error) - netdev_err(ndev, "failed to switch device to config mode\n"); + /* If gPTP active in config mode is supported it needs to be configured + * along with CSEL and operating mode in the same access. This is a + * hardware limitation. + */ + if (opmode & CCC_GAC) + ccc_mask |= CCC_GAC | CCC_CSEL; + + /* Set operating mode */ + ravb_modify(ndev, CCC, ccc_mask, opmode); + /* Check if the operating mode is changed to the requested one */ + error = ravb_wait(ndev, CSR, CSR_OPS, csr_ops); + if (error) { + netdev_err(ndev, "failed to switch device to requested mode (%u)\n", + opmode & CCC_OPC); + } return error; } @@ -515,6 +526,15 @@ static void ravb_emac_init_gbeth(struct net_device *ndev) { struct ravb_private *priv = netdev_priv(ndev); + if (priv->phy_interface == PHY_INTERFACE_MODE_MII) { + ravb_write(ndev, (1000 << 16) | CXR35_SEL_XMII_MII, CXR35); + ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, 0); + } else { + ravb_write(ndev, (1000 << 16) | CXR35_SEL_XMII_RGMII, CXR35); + ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, + CXR31_SEL_LINK0); + } + /* Receive frame limit set register */ ravb_write(ndev, GBETH_RX_BUFF_MAX + ETH_FCS_LEN, RFLR); @@ -537,14 +557,6 @@ static void ravb_emac_init_gbeth(struct net_device *ndev) /* E-MAC interrupt enable register */ ravb_write(ndev, ECSIPR_ICDIP, ECSIPR); - - if (priv->phy_interface == PHY_INTERFACE_MODE_MII) { - ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, 0); - ravb_write(ndev, (1000 << 16) | CXR35_SEL_XMII_MII, CXR35); - } else { - ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, - CXR31_SEL_LINK0); - } } static void ravb_emac_init_rcar(struct net_device *ndev) @@ -672,7 +684,7 @@ static int ravb_dmac_init(struct net_device *ndev) int error; /* Set CONFIG mode */ - error = ravb_config(ndev); + error = ravb_set_opmode(ndev, CCC_OPC_CONFIG); if (error) return error; @@ -681,9 +693,7 @@ static int ravb_dmac_init(struct net_device *ndev) return error; /* Setting the control will start the AVB-DMAC process. */ - ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_OPERATION); - - return 0; + return ravb_set_opmode(ndev, CCC_OPC_OPERATION); } static void ravb_get_tx_tstamp(struct net_device *ndev) @@ -1045,7 +1055,7 @@ static int ravb_stop_dma(struct net_device *ndev) return error; /* Stop AVB-DMAC process */ - return ravb_config(ndev); + return ravb_set_opmode(ndev, CCC_OPC_CONFIG); } /* E-MAC interrupt handler */ @@ -1811,19 +1821,20 @@ static int ravb_open(struct net_device *ndev) if (info->gptp) ravb_ptp_init(ndev, priv->pdev); - netif_tx_start_all_queues(ndev); - /* PHY control start */ error = ravb_phy_start(ndev); if (error) goto out_ptp_stop; + netif_tx_start_all_queues(ndev); + return 0; out_ptp_stop: /* Stop PTP Clock driver */ if (info->gptp) ravb_ptp_stop(ndev); + ravb_stop_dma(ndev); out_free_irq_mgmta: if (!info->multi_irqs) goto out_free_irq; @@ -1874,6 +1885,12 @@ static void ravb_tx_timeout_work(struct work_struct *work) struct net_device *ndev = priv->ndev; int error; + if (!rtnl_trylock()) { + usleep_range(1000, 2000); + schedule_work(&priv->work); + return; + } + netif_tx_stop_all_queues(ndev); /* Stop PTP Clock driver */ @@ -1907,7 +1924,7 @@ static void ravb_tx_timeout_work(struct work_struct *work) */ netdev_err(ndev, "%s: ravb_dmac_init() failed, error %d\n", __func__, error); - return; + goto out_unlock; } ravb_emac_init(ndev); @@ -1917,6 +1934,9 @@ out: ravb_ptp_init(ndev, priv->pdev); netif_tx_start_all_queues(ndev); + +out_unlock: + rtnl_unlock(); } /* Packet transmit function for Ethernet AVB */ @@ -2549,21 +2569,25 @@ static int ravb_set_gti(struct net_device *ndev) return 0; } -static void ravb_set_config_mode(struct net_device *ndev) +static int ravb_set_config_mode(struct net_device *ndev) { struct ravb_private *priv = netdev_priv(ndev); const struct ravb_hw_info *info = priv->info; + int error; if (info->gptp) { - ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG); + error = ravb_set_opmode(ndev, CCC_OPC_CONFIG); + if (error) + return error; /* Set CSEL value */ ravb_modify(ndev, CCC, CCC_CSEL, CCC_CSEL_HPB); } else if (info->ccc_gac) { - ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG | - CCC_GAC | CCC_CSEL_HPB); + error = ravb_set_opmode(ndev, CCC_OPC_CONFIG | CCC_GAC | CCC_CSEL_HPB); } else { - ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG); + error = ravb_set_opmode(ndev, CCC_OPC_CONFIG); } + + return error; } /* Set tx and rx clock internal delay modes */ @@ -2645,9 +2669,14 @@ static int ravb_probe(struct platform_device *pdev) ndev->features = info->net_features; ndev->hw_features = info->net_hw_features; - reset_control_deassert(rstc); + error = reset_control_deassert(rstc); + if (error) + goto out_free_netdev; + pm_runtime_enable(&pdev->dev); - pm_runtime_get_sync(&pdev->dev); + error = pm_runtime_resume_and_get(&pdev->dev); + if (error < 0) + goto out_rpm_disable; if (info->multi_irqs) { if (info->err_mgmt_irqs) @@ -2778,7 +2807,9 @@ static int ravb_probe(struct platform_device *pdev) ndev->ethtool_ops = &ravb_ethtool_ops; /* Set AVB config mode */ - ravb_set_config_mode(ndev); + error = ravb_set_config_mode(ndev); + if (error) + goto out_disable_gptp_clk; if (info->gptp || info->ccc_gac) { /* Set GTI value */ @@ -2872,11 +2903,12 @@ out_disable_gptp_clk: out_disable_refclk: clk_disable_unprepare(priv->refclk); out_release: - free_netdev(ndev); - pm_runtime_put(&pdev->dev); +out_rpm_disable: pm_runtime_disable(&pdev->dev); reset_control_assert(rstc); +out_free_netdev: + free_netdev(ndev); return error; } @@ -2886,22 +2918,25 @@ static void ravb_remove(struct platform_device *pdev) struct ravb_private *priv = netdev_priv(ndev); const struct ravb_hw_info *info = priv->info; - /* Stop PTP Clock driver */ - if (info->ccc_gac) - ravb_ptp_stop(ndev); - - clk_disable_unprepare(priv->gptp_clk); - clk_disable_unprepare(priv->refclk); - - /* Set reset mode */ - ravb_write(ndev, CCC_OPC_RESET, CCC); unregister_netdev(ndev); if (info->nc_queues) netif_napi_del(&priv->napi[RAVB_NC]); netif_napi_del(&priv->napi[RAVB_BE]); + ravb_mdio_release(priv); + + /* Stop PTP Clock driver */ + if (info->ccc_gac) + ravb_ptp_stop(ndev); + dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat, priv->desc_bat_dma); + + ravb_set_opmode(ndev, CCC_OPC_RESET); + + clk_disable_unprepare(priv->gptp_clk); + clk_disable_unprepare(priv->refclk); + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); reset_control_assert(priv->rstc); @@ -2979,8 +3014,11 @@ static int __maybe_unused ravb_resume(struct device *dev) int ret = 0; /* If WoL is enabled set reset mode to rearm the WoL logic */ - if (priv->wol_enabled) - ravb_write(ndev, CCC_OPC_RESET, CCC); + if (priv->wol_enabled) { + ret = ravb_set_opmode(ndev, CCC_OPC_RESET); + if (ret) + return ret; + } /* All register have been reset to default values. * Restore all registers which where setup at probe time and @@ -2988,7 +3026,9 @@ static int __maybe_unused ravb_resume(struct device *dev) */ /* Set AVB config mode */ - ravb_set_config_mode(ndev); + ret = ravb_set_config_mode(ndev); + if (ret) + return ret; if (info->gptp || info->ccc_gac) { /* Set GTI value */ |