diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/stmmac_main.c')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 75 |
1 files changed, 66 insertions, 9 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index e58ff652e95f..3c50846f59cd 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -28,6 +28,7 @@ #include <linux/if_vlan.h> #include <linux/dma-mapping.h> #include <linux/slab.h> +#include <linux/pm_runtime.h> #include <linux/prefetch.h> #include <linux/pinctrl/consumer.h> #ifdef CONFIG_DEBUG_FS @@ -113,6 +114,28 @@ static void stmmac_exit_fs(struct net_device *dev); #define STMMAC_COAL_TIMER(x) (ns_to_ktime((x) * NSEC_PER_USEC)) +int stmmac_bus_clks_config(struct stmmac_priv *priv, bool enabled) +{ + int ret = 0; + + if (enabled) { + ret = clk_prepare_enable(priv->plat->stmmac_clk); + if (ret) + return ret; + ret = clk_prepare_enable(priv->plat->pclk); + if (ret) { + clk_disable_unprepare(priv->plat->stmmac_clk); + return ret; + } + } else { + clk_disable_unprepare(priv->plat->stmmac_clk); + clk_disable_unprepare(priv->plat->pclk); + } + + return ret; +} +EXPORT_SYMBOL_GPL(stmmac_bus_clks_config); + /** * stmmac_verify_args - verify the driver parameters. * Description: it checks the driver parameters and set a default in case of @@ -2896,6 +2919,12 @@ static int stmmac_open(struct net_device *dev) u32 chan; int ret; + ret = pm_runtime_get_sync(priv->device); + if (ret < 0) { + pm_runtime_put_noidle(priv->device); + return ret; + } + if (priv->hw->pcs != STMMAC_PCS_TBI && priv->hw->pcs != STMMAC_PCS_RTBI && priv->hw->xpcs_args.an_mode != DW_AN_C73) { @@ -2904,7 +2933,7 @@ static int stmmac_open(struct net_device *dev) netdev_err(priv->dev, "%s: Cannot attach to PHY (error: %d)\n", __func__, ret); - return ret; + goto init_phy_error; } } @@ -3020,6 +3049,8 @@ init_error: free_dma_desc_resources(priv); dma_desc_error: phylink_disconnect_phy(priv->phylink); +init_phy_error: + pm_runtime_put(priv->device); return ret; } @@ -3070,6 +3101,8 @@ static int stmmac_release(struct net_device *dev) stmmac_release_ptp(priv); + pm_runtime_put(priv->device); + return 0; } @@ -4706,6 +4739,12 @@ static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid bool is_double = false; int ret; + ret = pm_runtime_get_sync(priv->device); + if (ret < 0) { + pm_runtime_put_noidle(priv->device); + return ret; + } + if (be16_to_cpu(proto) == ETH_P_8021AD) is_double = true; @@ -4739,10 +4778,15 @@ static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vi if (priv->hw->num_vlan) { ret = stmmac_del_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid); if (ret) - return ret; + goto del_vlan_error; } - return stmmac_vlan_update(priv, is_double); + ret = stmmac_vlan_update(priv, is_double); + +del_vlan_error: + pm_runtime_put(priv->device); + + return ret; } static const struct net_device_ops stmmac_netdev_ops = { @@ -5181,6 +5225,10 @@ int stmmac_dvr_probe(struct device *device, stmmac_check_pcs_mode(priv); + pm_runtime_get_noresume(device); + pm_runtime_set_active(device); + pm_runtime_enable(device); + if (priv->hw->pcs != STMMAC_PCS_TBI && priv->hw->pcs != STMMAC_PCS_RTBI) { /* MDIO bus Registration */ @@ -5218,6 +5266,11 @@ int stmmac_dvr_probe(struct device *device, stmmac_init_fs(ndev); #endif + /* Let pm_runtime_put() disable the clocks. + * If CONFIG_PM is not enabled, the clocks will stay powered. + */ + pm_runtime_put(device); + return ret; error_serdes_powerup: @@ -5232,6 +5285,7 @@ error_mdio_register: stmmac_napi_del(ndev); error_hw_init: destroy_workqueue(priv->wq); + stmmac_bus_clks_config(priv, false); return ret; } @@ -5267,8 +5321,8 @@ int stmmac_dvr_remove(struct device *dev) phylink_destroy(priv->phylink); if (priv->plat->stmmac_rst) reset_control_assert(priv->plat->stmmac_rst); - clk_disable_unprepare(priv->plat->pclk); - clk_disable_unprepare(priv->plat->stmmac_clk); + pm_runtime_put(dev); + pm_runtime_disable(dev); if (priv->hw->pcs != STMMAC_PCS_TBI && priv->hw->pcs != STMMAC_PCS_RTBI) stmmac_mdio_unregister(ndev); @@ -5291,6 +5345,7 @@ int stmmac_suspend(struct device *dev) struct net_device *ndev = dev_get_drvdata(dev); struct stmmac_priv *priv = netdev_priv(ndev); u32 chan; + int ret; if (!ndev || !netif_running(ndev)) return 0; @@ -5334,8 +5389,9 @@ int stmmac_suspend(struct device *dev) pinctrl_pm_select_sleep_state(priv->device); /* Disable clock in case of PWM is off */ clk_disable_unprepare(priv->plat->clk_ptp_ref); - clk_disable_unprepare(priv->plat->pclk); - clk_disable_unprepare(priv->plat->stmmac_clk); + ret = pm_runtime_force_suspend(dev); + if (ret) + return ret; } mutex_unlock(&priv->lock); @@ -5401,8 +5457,9 @@ int stmmac_resume(struct device *dev) } else { pinctrl_pm_select_default_state(priv->device); /* enable the clk previously disabled */ - clk_prepare_enable(priv->plat->stmmac_clk); - clk_prepare_enable(priv->plat->pclk); + ret = pm_runtime_force_resume(dev); + if (ret) + return ret; if (priv->plat->clk_ptp_ref) clk_prepare_enable(priv->plat->clk_ptp_ref); /* reset the phy so that it's ready */ |