diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/stmmac_main.c')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 147 |
1 files changed, 47 insertions, 100 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 8ded4be08b00..891a383da5a1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -946,105 +946,15 @@ static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex) priv->pause, tx_cnt); } -static void stmmac_validate(struct phylink_config *config, - unsigned long *supported, - struct phylink_link_state *state) +static struct phylink_pcs *stmmac_mac_select_pcs(struct phylink_config *config, + phy_interface_t interface) { struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev)); - __ETHTOOL_DECLARE_LINK_MODE_MASK(mac_supported) = { 0, }; - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - int tx_cnt = priv->plat->tx_queues_to_use; - int max_speed = priv->plat->max_speed; - - phylink_set(mac_supported, 10baseT_Half); - phylink_set(mac_supported, 10baseT_Full); - phylink_set(mac_supported, 100baseT_Half); - phylink_set(mac_supported, 100baseT_Full); - phylink_set(mac_supported, 1000baseT_Half); - phylink_set(mac_supported, 1000baseT_Full); - phylink_set(mac_supported, 1000baseKX_Full); - - phylink_set(mac_supported, Autoneg); - phylink_set(mac_supported, Pause); - phylink_set(mac_supported, Asym_Pause); - phylink_set_port_modes(mac_supported); - - /* Cut down 1G if asked to */ - if ((max_speed > 0) && (max_speed < 1000)) { - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseX_Full); - } else if (priv->plat->has_gmac4) { - if (!max_speed || max_speed >= 2500) { - phylink_set(mac_supported, 2500baseT_Full); - phylink_set(mac_supported, 2500baseX_Full); - } - } else if (priv->plat->has_xgmac) { - if (!max_speed || (max_speed >= 2500)) { - phylink_set(mac_supported, 2500baseT_Full); - phylink_set(mac_supported, 2500baseX_Full); - } - if (!max_speed || (max_speed >= 5000)) { - phylink_set(mac_supported, 5000baseT_Full); - } - if (!max_speed || (max_speed >= 10000)) { - phylink_set(mac_supported, 10000baseSR_Full); - phylink_set(mac_supported, 10000baseLR_Full); - phylink_set(mac_supported, 10000baseER_Full); - phylink_set(mac_supported, 10000baseLRM_Full); - phylink_set(mac_supported, 10000baseT_Full); - phylink_set(mac_supported, 10000baseKX4_Full); - phylink_set(mac_supported, 10000baseKR_Full); - } - if (!max_speed || (max_speed >= 25000)) { - phylink_set(mac_supported, 25000baseCR_Full); - phylink_set(mac_supported, 25000baseKR_Full); - phylink_set(mac_supported, 25000baseSR_Full); - } - if (!max_speed || (max_speed >= 40000)) { - phylink_set(mac_supported, 40000baseKR4_Full); - phylink_set(mac_supported, 40000baseCR4_Full); - phylink_set(mac_supported, 40000baseSR4_Full); - phylink_set(mac_supported, 40000baseLR4_Full); - } - if (!max_speed || (max_speed >= 50000)) { - phylink_set(mac_supported, 50000baseCR2_Full); - phylink_set(mac_supported, 50000baseKR2_Full); - phylink_set(mac_supported, 50000baseSR2_Full); - phylink_set(mac_supported, 50000baseKR_Full); - phylink_set(mac_supported, 50000baseSR_Full); - phylink_set(mac_supported, 50000baseCR_Full); - phylink_set(mac_supported, 50000baseLR_ER_FR_Full); - phylink_set(mac_supported, 50000baseDR_Full); - } - if (!max_speed || (max_speed >= 100000)) { - phylink_set(mac_supported, 100000baseKR4_Full); - phylink_set(mac_supported, 100000baseSR4_Full); - phylink_set(mac_supported, 100000baseCR4_Full); - phylink_set(mac_supported, 100000baseLR4_ER4_Full); - phylink_set(mac_supported, 100000baseKR2_Full); - phylink_set(mac_supported, 100000baseSR2_Full); - phylink_set(mac_supported, 100000baseCR2_Full); - phylink_set(mac_supported, 100000baseLR2_ER2_FR2_Full); - phylink_set(mac_supported, 100000baseDR2_Full); - } - } - - /* Half-Duplex can only work with single queue */ - if (tx_cnt > 1) { - phylink_set(mask, 10baseT_Half); - phylink_set(mask, 100baseT_Half); - phylink_set(mask, 1000baseT_Half); - } - - linkmode_and(supported, supported, mac_supported); - linkmode_andnot(supported, supported, mask); - linkmode_and(state->advertising, state->advertising, mac_supported); - linkmode_andnot(state->advertising, state->advertising, mask); + if (!priv->hw->xpcs) + return NULL; - /* If PCS is supported, check which modes it supports. */ - if (priv->hw->xpcs) - xpcs_validate(priv->hw->xpcs, supported, state); + return &priv->hw->xpcs->pcs; } static void stmmac_mac_config(struct phylink_config *config, unsigned int mode, @@ -1183,7 +1093,8 @@ static void stmmac_mac_link_up(struct phylink_config *config, } static const struct phylink_mac_ops stmmac_phylink_mac_ops = { - .validate = stmmac_validate, + .validate = phylink_generic_validate, + .mac_select_pcs = stmmac_mac_select_pcs, .mac_config = stmmac_mac_config, .mac_link_down = stmmac_mac_link_down, .mac_link_up = stmmac_mac_link_up, @@ -1263,12 +1174,12 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) { struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data; struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node); + int max_speed = priv->plat->max_speed; int mode = priv->plat->phy_interface; struct phylink *phylink; priv->phylink_config.dev = &priv->dev->dev; priv->phylink_config.type = PHYLINK_NETDEV; - priv->phylink_config.pcs_poll = true; if (priv->plat->mdio_bus_data) priv->phylink_config.ovr_an_inband = mdio_bus_data->xpcs_an_inband; @@ -1276,14 +1187,50 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) if (!fwnode) fwnode = dev_fwnode(priv->device); + /* Set the platform/firmware specified interface mode */ + __set_bit(mode, priv->phylink_config.supported_interfaces); + + /* If we have an xpcs, it defines which PHY interfaces are supported. */ + if (priv->hw->xpcs) + xpcs_get_interfaces(priv->hw->xpcs, + priv->phylink_config.supported_interfaces); + + priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100; + + if (!max_speed || max_speed >= 1000) + priv->phylink_config.mac_capabilities |= MAC_1000; + + if (priv->plat->has_gmac4) { + if (!max_speed || max_speed >= 2500) + priv->phylink_config.mac_capabilities |= MAC_2500FD; + } else if (priv->plat->has_xgmac) { + if (!max_speed || max_speed >= 2500) + priv->phylink_config.mac_capabilities |= MAC_2500FD; + if (!max_speed || max_speed >= 5000) + priv->phylink_config.mac_capabilities |= MAC_5000FD; + if (!max_speed || max_speed >= 10000) + priv->phylink_config.mac_capabilities |= MAC_10000FD; + if (!max_speed || max_speed >= 25000) + priv->phylink_config.mac_capabilities |= MAC_25000FD; + if (!max_speed || max_speed >= 40000) + priv->phylink_config.mac_capabilities |= MAC_40000FD; + if (!max_speed || max_speed >= 50000) + priv->phylink_config.mac_capabilities |= MAC_50000FD; + if (!max_speed || max_speed >= 100000) + priv->phylink_config.mac_capabilities |= MAC_100000FD; + } + + /* Half-Duplex can only work with single queue */ + if (priv->plat->tx_queues_to_use > 1) + priv->phylink_config.mac_capabilities &= + ~(MAC_10HD | MAC_100HD | MAC_1000HD); + phylink = phylink_create(&priv->phylink_config, fwnode, mode, &stmmac_phylink_mac_ops); if (IS_ERR(phylink)) return PTR_ERR(phylink); - if (priv->hw->xpcs) - phylink_set_pcs(phylink, &priv->hw->xpcs->pcs); - priv->phylink = phylink; return 0; } |