diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/stmmac_main.c')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 51 |
1 files changed, 34 insertions, 17 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 8f543c3ab5c5..d7fcab057032 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1134,20 +1134,26 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv) static int stmmac_init_phy(struct net_device *dev) { struct stmmac_priv *priv = netdev_priv(dev); + struct fwnode_handle *phy_fwnode; struct fwnode_handle *fwnode; int ret; + if (!phylink_expects_phy(priv->phylink)) + return 0; + fwnode = of_fwnode_handle(priv->plat->phylink_node); if (!fwnode) fwnode = dev_fwnode(priv->device); if (fwnode) - ret = phylink_fwnode_phy_connect(priv->phylink, fwnode, 0); + phy_fwnode = fwnode_get_phy_node(fwnode); + else + phy_fwnode = NULL; /* Some DT bindings do not set-up the PHY handle. Let's try to * manually parse it */ - if (!fwnode || ret) { + if (!phy_fwnode || IS_ERR(phy_fwnode)) { int addr = priv->plat->phy_addr; struct phy_device *phydev; @@ -1163,6 +1169,9 @@ static int stmmac_init_phy(struct net_device *dev) } ret = phylink_connect_phy(priv->phylink, phydev); + } else { + fwnode_handle_put(phy_fwnode); + ret = phylink_fwnode_phy_connect(priv->phylink, fwnode, 0); } if (!priv->plat->pmt) { @@ -1431,7 +1440,7 @@ static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct stmmac_rx_buffer *buf = &rx_q->buf_pool[i]; gfp_t gfp = (GFP_ATOMIC | __GFP_NOWARN); - if (priv->dma_cap.addr64 <= 32) + if (priv->dma_cap.host_dma_width <= 32) gfp |= GFP_DMA32; if (!buf->page) { @@ -4587,7 +4596,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue) unsigned int entry = rx_q->dirty_rx; gfp_t gfp = (GFP_ATOMIC | __GFP_NOWARN); - if (priv->dma_cap.addr64 <= 32) + if (priv->dma_cap.host_dma_width <= 32) gfp |= GFP_DMA32; while (dirty-- > 0) { @@ -6205,7 +6214,7 @@ static int stmmac_dma_cap_show(struct seq_file *seq, void *v) seq_printf(seq, "\tFlexible RX Parser: %s\n", priv->dma_cap.frpsel ? "Y" : "N"); seq_printf(seq, "\tEnhanced Addressing: %d\n", - priv->dma_cap.addr64); + priv->dma_cap.host_dma_width); seq_printf(seq, "\tReceive Side Scaling: %s\n", priv->dma_cap.rssen ? "Y" : "N"); seq_printf(seq, "\tVLAN Hash Filtering: %s\n", @@ -6622,6 +6631,8 @@ int stmmac_xdp_open(struct net_device *dev) goto init_error; } + stmmac_reset_queues_param(priv); + /* DMA CSR Channel configuration */ for (chan = 0; chan < dma_csr_ch; chan++) { stmmac_init_chan(priv, priv->ioaddr, priv->plat->dma_cfg, chan); @@ -6948,7 +6959,7 @@ static void stmmac_napi_del(struct net_device *dev) int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) { struct stmmac_priv *priv = netdev_priv(dev); - int ret = 0; + int ret = 0, i; if (netif_running(dev)) stmmac_release(dev); @@ -6957,6 +6968,10 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) priv->plat->rx_queues_to_use = rx_cnt; priv->plat->tx_queues_to_use = tx_cnt; + if (!netif_is_rxfh_configured(dev)) + for (i = 0; i < ARRAY_SIZE(priv->rss.table); i++) + priv->rss.table[i] = ethtool_rxfh_indir_default(i, + rx_cnt); stmmac_napi_add(dev); @@ -7178,20 +7193,22 @@ int stmmac_dvr_probe(struct device *device, dev_info(priv->device, "SPH feature enabled\n"); } - /* The current IP register MAC_HW_Feature1[ADDR64] only define - * 32/40/64 bit width, but some SOC support others like i.MX8MP - * support 34 bits but it map to 40 bits width in MAC_HW_Feature1[ADDR64]. - * So overwrite dma_cap.addr64 according to HW real design. + /* Ideally our host DMA address width is the same as for the + * device. However, it may differ and then we have to use our + * host DMA width for allocation and the device DMA width for + * register handling. */ - if (priv->plat->addr64) - priv->dma_cap.addr64 = priv->plat->addr64; + if (priv->plat->host_dma_width) + priv->dma_cap.host_dma_width = priv->plat->host_dma_width; + else + priv->dma_cap.host_dma_width = priv->dma_cap.addr64; - if (priv->dma_cap.addr64) { + if (priv->dma_cap.host_dma_width) { ret = dma_set_mask_and_coherent(device, - DMA_BIT_MASK(priv->dma_cap.addr64)); + DMA_BIT_MASK(priv->dma_cap.host_dma_width)); if (!ret) { - dev_info(priv->device, "Using %d bits DMA width\n", - priv->dma_cap.addr64); + dev_info(priv->device, "Using %d/%d bits DMA host/device width\n", + priv->dma_cap.host_dma_width, priv->dma_cap.addr64); /* * If more than 32 bits can be addressed, make sure to @@ -7206,7 +7223,7 @@ int stmmac_dvr_probe(struct device *device, goto error_hw_init; } - priv->dma_cap.addr64 = 32; + priv->dma_cap.host_dma_width = 32; } } |