diff options
Diffstat (limited to 'drivers/net/ethernet/wangxun/libwx')
| -rw-r--r-- | drivers/net/ethernet/wangxun/libwx/wx_hw.c | 160 | ||||
| -rw-r--r-- | drivers/net/ethernet/wangxun/libwx/wx_hw.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/wangxun/libwx/wx_type.h | 146 |
3 files changed, 308 insertions, 0 deletions
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c index fed51c2f3071..6e2a2d251a09 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c @@ -7,6 +7,21 @@ #include "wx_type.h" #include "wx_hw.h" +static void wx_intr_disable(struct wx_hw *wxhw, u64 qmask) +{ + u32 mask; + + mask = (qmask & 0xFFFFFFFF); + if (mask) + wr32(wxhw, WX_PX_IMS(0), mask); + + if (wxhw->mac.type == wx_mac_sp) { + mask = (qmask >> 32); + if (mask) + wr32(wxhw, WX_PX_IMS(1), mask); + } +} + /* cmd_addr is used for some special command: * 1. to be sector address, when implemented erase sector command * 2. to be flash address when implemented read, write flash address @@ -56,6 +71,151 @@ int wx_check_flash_load(struct wx_hw *hw, u32 check_bit) } EXPORT_SYMBOL(wx_check_flash_load); +static void wx_disable_rx(struct wx_hw *wxhw) +{ + u32 pfdtxgswc; + u32 rxctrl; + + rxctrl = rd32(wxhw, WX_RDB_PB_CTL); + if (rxctrl & WX_RDB_PB_CTL_RXEN) { + pfdtxgswc = rd32(wxhw, WX_PSR_CTL); + if (pfdtxgswc & WX_PSR_CTL_SW_EN) { + pfdtxgswc &= ~WX_PSR_CTL_SW_EN; + wr32(wxhw, WX_PSR_CTL, pfdtxgswc); + wxhw->mac.set_lben = true; + } else { + wxhw->mac.set_lben = false; + } + rxctrl &= ~WX_RDB_PB_CTL_RXEN; + wr32(wxhw, WX_RDB_PB_CTL, rxctrl); + + if (!(((wxhw->subsystem_device_id & WX_NCSI_MASK) == WX_NCSI_SUP) || + ((wxhw->subsystem_device_id & WX_WOL_MASK) == WX_WOL_SUP))) { + /* disable mac receiver */ + wr32m(wxhw, WX_MAC_RX_CFG, + WX_MAC_RX_CFG_RE, 0); + } + } +} + +/** + * wx_disable_pcie_master - Disable PCI-express master access + * @wxhw: pointer to hardware structure + * + * Disables PCI-Express master access and verifies there are no pending + * requests. + **/ +static int wx_disable_pcie_master(struct wx_hw *wxhw) +{ + int status = 0; + u32 val; + + /* Always set this bit to ensure any future transactions are blocked */ + pci_clear_master(wxhw->pdev); + + /* Exit if master requests are blocked */ + if (!(rd32(wxhw, WX_PX_TRANSACTION_PENDING))) + return 0; + + /* Poll for master request bit to clear */ + status = read_poll_timeout(rd32, val, !val, 100, WX_PCI_MASTER_DISABLE_TIMEOUT, + false, wxhw, WX_PX_TRANSACTION_PENDING); + if (status < 0) + wx_err(wxhw, "PCIe transaction pending bit did not clear.\n"); + + return status; +} + +/** + * wx_stop_adapter - Generic stop Tx/Rx units + * @wxhw: pointer to hardware structure + * + * Sets the adapter_stopped flag within wx_hw struct. Clears interrupts, + * disables transmit and receive units. The adapter_stopped flag is used by + * the shared code and drivers to determine if the adapter is in a stopped + * state and should not touch the hardware. + **/ +int wx_stop_adapter(struct wx_hw *wxhw) +{ + u16 i; + + /* Set the adapter_stopped flag so other driver functions stop touching + * the hardware + */ + wxhw->adapter_stopped = true; + + /* Disable the receive unit */ + wx_disable_rx(wxhw); + + /* Set interrupt mask to stop interrupts from being generated */ + wx_intr_disable(wxhw, WX_INTR_ALL); + + /* Clear any pending interrupts, flush previous writes */ + wr32(wxhw, WX_PX_MISC_IC, 0xffffffff); + wr32(wxhw, WX_BME_CTL, 0x3); + + /* Disable the transmit unit. Each queue must be disabled. */ + for (i = 0; i < wxhw->mac.max_tx_queues; i++) { + wr32m(wxhw, WX_PX_TR_CFG(i), + WX_PX_TR_CFG_SWFLSH | WX_PX_TR_CFG_ENABLE, + WX_PX_TR_CFG_SWFLSH); + } + + /* Disable the receive unit by stopping each queue */ + for (i = 0; i < wxhw->mac.max_rx_queues; i++) { + wr32m(wxhw, WX_PX_RR_CFG(i), + WX_PX_RR_CFG_RR_EN, 0); + } + + /* flush all queues disables */ + WX_WRITE_FLUSH(wxhw); + + /* Prevent the PCI-E bus from hanging by disabling PCI-E master + * access and verify no pending requests + */ + return wx_disable_pcie_master(wxhw); +} +EXPORT_SYMBOL(wx_stop_adapter); + +void wx_reset_misc(struct wx_hw *wxhw) +{ + int i; + + /* receive packets that size > 2048 */ + wr32m(wxhw, WX_MAC_RX_CFG, WX_MAC_RX_CFG_JE, WX_MAC_RX_CFG_JE); + + /* clear counters on read */ + wr32m(wxhw, WX_MMC_CONTROL, + WX_MMC_CONTROL_RSTONRD, WX_MMC_CONTROL_RSTONRD); + + wr32m(wxhw, WX_MAC_RX_FLOW_CTRL, + WX_MAC_RX_FLOW_CTRL_RFE, WX_MAC_RX_FLOW_CTRL_RFE); + + wr32(wxhw, WX_MAC_PKT_FLT, WX_MAC_PKT_FLT_PR); + + wr32m(wxhw, WX_MIS_RST_ST, + WX_MIS_RST_ST_RST_INIT, 0x1E00); + + /* errata 4: initialize mng flex tbl and wakeup flex tbl*/ + wr32(wxhw, WX_PSR_MNG_FLEX_SEL, 0); + for (i = 0; i < 16; i++) { + wr32(wxhw, WX_PSR_MNG_FLEX_DW_L(i), 0); + wr32(wxhw, WX_PSR_MNG_FLEX_DW_H(i), 0); + wr32(wxhw, WX_PSR_MNG_FLEX_MSK(i), 0); + } + wr32(wxhw, WX_PSR_LAN_FLEX_SEL, 0); + for (i = 0; i < 16; i++) { + wr32(wxhw, WX_PSR_LAN_FLEX_DW_L(i), 0); + wr32(wxhw, WX_PSR_LAN_FLEX_DW_H(i), 0); + wr32(wxhw, WX_PSR_LAN_FLEX_MSK(i), 0); + } + + /* set pause frame dst mac addr */ + wr32(wxhw, WX_RDB_PFCMACDAL, 0xC2000001); + wr32(wxhw, WX_RDB_PFCMACDAH, 0x0180); +} +EXPORT_SYMBOL(wx_reset_misc); + int wx_sw_init(struct wx_hw *wxhw) { struct pci_dev *pdev = wxhw->pdev; diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.h b/drivers/net/ethernet/wangxun/libwx/wx_hw.h index 42e95283242c..2c4c4cbbfb46 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.h +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.h @@ -5,6 +5,8 @@ #define _WX_HW_H_ int wx_check_flash_load(struct wx_hw *hw, u32 check_bit); +int wx_stop_adapter(struct wx_hw *wxhw); +void wx_reset_misc(struct wx_hw *wxhw); int wx_sw_init(struct wx_hw *wxhw); #endif /* _WX_HW_H_ */ diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h index 1b2d8ad38dba..1d8e8a529d7a 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_type.h +++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h @@ -9,6 +9,20 @@ #define PCI_VENDOR_ID_WANGXUN 0x8088 #endif +#define WX_NCSI_SUP 0x8000 +#define WX_NCSI_MASK 0x8000 +#define WX_WOL_SUP 0x4000 +#define WX_WOL_MASK 0x4000 + +/**************** Global Registers ****************************/ +/* chip control Registers */ +#define WX_MIS_PWR 0x10000 +#define WX_MIS_RST 0x1000C +#define WX_MIS_RST_LAN_RST(_i) BIT((_i) + 1) +#define WX_MIS_RST_ST 0x10030 +#define WX_MIS_RST_ST_RST_INI_SHIFT 8 +#define WX_MIS_RST_ST_RST_INIT (0xFF << WX_MIS_RST_ST_RST_INI_SHIFT) + /* FMGR Registers */ #define WX_SPI_CMD 0x10104 #define WX_SPI_CMD_READ_DWORD 0x1 @@ -25,16 +39,120 @@ #define WX_SPI_STATUS_FLASH_BYPASS BIT(31) #define WX_SPI_ILDR_STATUS 0x10120 +/* Sensors for PVT(Process Voltage Temperature) */ +#define WX_TS_EN 0x10304 +#define WX_TS_EN_ENA BIT(0) +#define WX_TS_ALARM_THRE 0x1030C +#define WX_TS_DALARM_THRE 0x10310 +#define WX_TS_INT_EN 0x10314 +#define WX_TS_INT_EN_DALARM_INT_EN BIT(1) +#define WX_TS_INT_EN_ALARM_INT_EN BIT(0) +#define WX_TS_ALARM_ST 0x10318 +#define WX_TS_ALARM_ST_DALARM BIT(1) +#define WX_TS_ALARM_ST_ALARM BIT(0) + +/***************************** RDB registers *********************************/ +/* receive packet buffer */ +#define WX_RDB_PB_CTL 0x19000 +#define WX_RDB_PB_CTL_RXEN BIT(31) /* Enable Receiver */ +#define WX_RDB_PB_CTL_DISABLED BIT(0) +/* statistic */ +#define WX_RDB_PFCMACDAL 0x19210 +#define WX_RDB_PFCMACDAH 0x19214 + +/******************************* PSR Registers *******************************/ +/* psr control */ +#define WX_PSR_CTL 0x15000 +/* Header split receive */ +#define WX_PSR_CTL_SW_EN BIT(18) +#define WX_PSR_CTL_RSC_ACK BIT(17) +#define WX_PSR_CTL_RSC_DIS BIT(16) +#define WX_PSR_CTL_PCSD BIT(13) +#define WX_PSR_CTL_IPPCSE BIT(12) +#define WX_PSR_CTL_BAM BIT(10) +#define WX_PSR_CTL_UPE BIT(9) +#define WX_PSR_CTL_MPE BIT(8) +#define WX_PSR_CTL_MFE BIT(7) +#define WX_PSR_CTL_MO_SHIFT 5 +#define WX_PSR_CTL_MO (0x3 << WX_PSR_CTL_MO_SHIFT) +#define WX_PSR_CTL_TPE BIT(4) + +/* Management */ +#define WX_PSR_MNG_FLEX_SEL 0x1582C +#define WX_PSR_MNG_FLEX_DW_L(_i) (0x15A00 + ((_i) * 16)) +#define WX_PSR_MNG_FLEX_DW_H(_i) (0x15A04 + ((_i) * 16)) +#define WX_PSR_MNG_FLEX_MSK(_i) (0x15A08 + ((_i) * 16)) +#define WX_PSR_LAN_FLEX_SEL 0x15B8C +#define WX_PSR_LAN_FLEX_DW_L(_i) (0x15C00 + ((_i) * 16)) +#define WX_PSR_LAN_FLEX_DW_H(_i) (0x15C04 + ((_i) * 16)) +#define WX_PSR_LAN_FLEX_MSK(_i) (0x15C08 + ((_i) * 16)) + +/************************************* ETH MAC *****************************/ +#define WX_MAC_RX_CFG 0x11004 +#define WX_MAC_RX_CFG_RE BIT(0) +#define WX_MAC_RX_CFG_JE BIT(8) +#define WX_MAC_PKT_FLT 0x11008 +#define WX_MAC_PKT_FLT_PR BIT(0) /* promiscuous mode */ +#define WX_MAC_RX_FLOW_CTRL 0x11090 +#define WX_MAC_RX_FLOW_CTRL_RFE BIT(0) /* receive fc enable */ +#define WX_MMC_CONTROL 0x11800 +#define WX_MMC_CONTROL_RSTONRD BIT(2) /* reset on read */ + +/********************************* BAR registers ***************************/ +/* Interrupt Registers */ +#define WX_BME_CTL 0x12020 +#define WX_PX_MISC_IC 0x100 +#define WX_PX_IMS(_i) (0x140 + (_i) * 4) +#define WX_PX_TRANSACTION_PENDING 0x168 + +/* transmit DMA Registers */ +#define WX_PX_TR_CFG(_i) (0x03010 + ((_i) * 0x40)) +/* Transmit Config masks */ +#define WX_PX_TR_CFG_ENABLE BIT(0) /* Ena specific Tx Queue */ +#define WX_PX_TR_CFG_TR_SIZE_SHIFT 1 /* tx desc number per ring */ +#define WX_PX_TR_CFG_SWFLSH BIT(26) /* Tx Desc. wr-bk flushing */ +#define WX_PX_TR_CFG_WTHRESH_SHIFT 16 /* shift to WTHRESH bits */ +#define WX_PX_TR_CFG_THRE_SHIFT 8 + +/* Receive DMA Registers */ +#define WX_PX_RR_CFG(_i) (0x01010 + ((_i) * 0x40)) +/* PX_RR_CFG bit definitions */ +#define WX_PX_RR_CFG_RR_EN BIT(0) + +/* Number of 80 microseconds we wait for PCI Express master disable */ +#define WX_PCI_MASTER_DISABLE_TIMEOUT 80000 + /* Bus parameters */ struct wx_bus_info { u8 func; u16 device; }; +struct wx_thermal_sensor_data { + s16 temp; + s16 alarm_thresh; + s16 dalarm_thresh; +}; + +enum wx_mac_type { + wx_mac_unknown = 0, + wx_mac_sp, + wx_mac_em +}; + +struct wx_mac_info { + enum wx_mac_type type; + bool set_lben; + u32 max_tx_queues; + u32 max_rx_queues; + struct wx_thermal_sensor_data sensor; +}; + struct wx_hw { u8 __iomem *hw_addr; struct pci_dev *pdev; struct wx_bus_info bus; + struct wx_mac_info mac; u16 device_id; u16 vendor_id; u16 subsystem_device_id; @@ -42,12 +160,40 @@ struct wx_hw { u8 revision_id; u16 oem_ssid; u16 oem_svid; + bool adapter_stopped; }; +#define WX_INTR_ALL (~0ULL) + /* register operations */ #define wr32(a, reg, value) writel((value), ((a)->hw_addr + (reg))) #define rd32(a, reg) readl((a)->hw_addr + (reg)) +static inline u32 +rd32m(struct wx_hw *wxhw, u32 reg, u32 mask) +{ + u32 val; + + val = rd32(wxhw, reg); + return val & mask; +} + +static inline void +wr32m(struct wx_hw *wxhw, u32 reg, u32 mask, u32 field) +{ + u32 val; + + val = rd32(wxhw, reg); + val = ((val & ~mask) | (field & mask)); + + wr32(wxhw, reg, val); +} + +/* On some domestic CPU platforms, sometimes IO is not synchronized with + * flushing memory, here use readl() to flush PCI read and write. + */ +#define WX_WRITE_FLUSH(H) rd32(H, WX_MIS_PWR) + #define wx_err(wxhw, fmt, arg...) \ dev_err(&(wxhw)->pdev->dev, fmt, ##arg) |