summaryrefslogtreecommitdiff
path: root/drivers/net/gianfar_phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/gianfar_phy.c')
-rw-r--r--drivers/net/gianfar_phy.c661
1 files changed, 0 insertions, 661 deletions
diff --git a/drivers/net/gianfar_phy.c b/drivers/net/gianfar_phy.c
deleted file mode 100644
index 7c965f268a82..000000000000
--- a/drivers/net/gianfar_phy.c
+++ /dev/null
@@ -1,661 +0,0 @@
-/*
- * drivers/net/gianfar_phy.c
- *
- * Gianfar Ethernet Driver -- PHY handling
- * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
- * Based on 8260_io/fcc_enet.c
- *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala (kumar.gala@freescale.com)
- *
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/crc32.h>
-#include <linux/mii.h>
-
-#include "gianfar.h"
-#include "gianfar_phy.h"
-
-static void config_genmii_advert(struct gfar_mii_info *mii_info);
-static void genmii_setup_forced(struct gfar_mii_info *mii_info);
-static void genmii_restart_aneg(struct gfar_mii_info *mii_info);
-static int gbit_config_aneg(struct gfar_mii_info *mii_info);
-static int genmii_config_aneg(struct gfar_mii_info *mii_info);
-static int genmii_update_link(struct gfar_mii_info *mii_info);
-static int genmii_read_status(struct gfar_mii_info *mii_info);
-u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum);
-void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val);
-
-/* Write value to the PHY for this device to the register at regnum, */
-/* waiting until the write is done before it returns. All PHY */
-/* configuration has to be done through the TSEC1 MIIM regs */
-void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value)
-{
- struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regbase = priv->phyregs;
-
- /* Set the PHY address and the register address we want to write */
- gfar_write(&regbase->miimadd, (mii_id << 8) | regnum);
-
- /* Write out the value we want */
- gfar_write(&regbase->miimcon, value);
-
- /* Wait for the transaction to finish */
- while (gfar_read(&regbase->miimind) & MIIMIND_BUSY)
- cpu_relax();
-}
-
-/* Reads from register regnum in the PHY for device dev, */
-/* returning the value. Clears miimcom first. All PHY */
-/* configuration has to be done through the TSEC1 MIIM regs */
-int read_phy_reg(struct net_device *dev, int mii_id, int regnum)
-{
- struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regbase = priv->phyregs;
- u16 value;
-
- /* Set the PHY address and the register address we want to read */
- gfar_write(&regbase->miimadd, (mii_id << 8) | regnum);
-
- /* Clear miimcom, and then initiate a read */
- gfar_write(&regbase->miimcom, 0);
- gfar_write(&regbase->miimcom, MII_READ_COMMAND);
-
- /* Wait for the transaction to finish */
- while (gfar_read(&regbase->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
- cpu_relax();
-
- /* Grab the value of the register from miimstat */
- value = gfar_read(&regbase->miimstat);
-
- return value;
-}
-
-void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info)
-{
- if(mii_info->phyinfo->ack_interrupt)
- mii_info->phyinfo->ack_interrupt(mii_info);
-}
-
-
-void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts)
-{
- mii_info->interrupts = interrupts;
- if(mii_info->phyinfo->config_intr)
- mii_info->phyinfo->config_intr(mii_info);
-}
-
-
-/* Writes MII_ADVERTISE with the appropriate values, after
- * sanitizing advertise to make sure only supported features
- * are advertised
- */
-static void config_genmii_advert(struct gfar_mii_info *mii_info)
-{
- u32 advertise;
- u16 adv;
-
- /* Only allow advertising what this PHY supports */
- mii_info->advertising &= mii_info->phyinfo->features;
- advertise = mii_info->advertising;
-
- /* Setup standard advertisement */
- adv = phy_read(mii_info, MII_ADVERTISE);
- adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
- if (advertise & ADVERTISED_10baseT_Half)
- adv |= ADVERTISE_10HALF;
- if (advertise & ADVERTISED_10baseT_Full)
- adv |= ADVERTISE_10FULL;
- if (advertise & ADVERTISED_100baseT_Half)
- adv |= ADVERTISE_100HALF;
- if (advertise & ADVERTISED_100baseT_Full)
- adv |= ADVERTISE_100FULL;
- phy_write(mii_info, MII_ADVERTISE, adv);
-}
-
-static void genmii_setup_forced(struct gfar_mii_info *mii_info)
-{
- u16 ctrl;
- u32 features = mii_info->phyinfo->features;
-
- ctrl = phy_read(mii_info, MII_BMCR);
-
- ctrl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPEED1000|BMCR_ANENABLE);
- ctrl |= BMCR_RESET;
-
- switch(mii_info->speed) {
- case SPEED_1000:
- if(features & (SUPPORTED_1000baseT_Half
- | SUPPORTED_1000baseT_Full)) {
- ctrl |= BMCR_SPEED1000;
- break;
- }
- mii_info->speed = SPEED_100;
- case SPEED_100:
- if (features & (SUPPORTED_100baseT_Half
- | SUPPORTED_100baseT_Full)) {
- ctrl |= BMCR_SPEED100;
- break;
- }
- mii_info->speed = SPEED_10;
- case SPEED_10:
- if (features & (SUPPORTED_10baseT_Half
- | SUPPORTED_10baseT_Full))
- break;
- default: /* Unsupported speed! */
- printk(KERN_ERR "%s: Bad speed!\n",
- mii_info->dev->name);
- break;
- }
-
- phy_write(mii_info, MII_BMCR, ctrl);
-}
-
-
-/* Enable and Restart Autonegotiation */
-static void genmii_restart_aneg(struct gfar_mii_info *mii_info)
-{
- u16 ctl;
-
- ctl = phy_read(mii_info, MII_BMCR);
- ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(mii_info, MII_BMCR, ctl);
-}
-
-
-static int gbit_config_aneg(struct gfar_mii_info *mii_info)
-{
- u16 adv;
- u32 advertise;
-
- if(mii_info->autoneg) {
- /* Configure the ADVERTISE register */
- config_genmii_advert(mii_info);
- advertise = mii_info->advertising;
-
- adv = phy_read(mii_info, MII_1000BASETCONTROL);
- adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
- MII_1000BASETCONTROL_HALFDUPLEXCAP);
- if (advertise & SUPPORTED_1000baseT_Half)
- adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
- if (advertise & SUPPORTED_1000baseT_Full)
- adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
- phy_write(mii_info, MII_1000BASETCONTROL, adv);
-
- /* Start/Restart aneg */
- genmii_restart_aneg(mii_info);
- } else
- genmii_setup_forced(mii_info);
-
- return 0;
-}
-
-static int marvell_config_aneg(struct gfar_mii_info *mii_info)
-{
- /* The Marvell PHY has an errata which requires
- * that certain registers get written in order
- * to restart autonegotiation */
- phy_write(mii_info, MII_BMCR, BMCR_RESET);
-
- phy_write(mii_info, 0x1d, 0x1f);
- phy_write(mii_info, 0x1e, 0x200c);
- phy_write(mii_info, 0x1d, 0x5);
- phy_write(mii_info, 0x1e, 0);
- phy_write(mii_info, 0x1e, 0x100);
-
- gbit_config_aneg(mii_info);
-
- return 0;
-}
-static int genmii_config_aneg(struct gfar_mii_info *mii_info)
-{
- if (mii_info->autoneg) {
- config_genmii_advert(mii_info);
- genmii_restart_aneg(mii_info);
- } else
- genmii_setup_forced(mii_info);
-
- return 0;
-}
-
-
-static int genmii_update_link(struct gfar_mii_info *mii_info)
-{
- u16 status;
-
- /* Do a fake read */
- phy_read(mii_info, MII_BMSR);
-
- /* Read link and autonegotiation status */
- status = phy_read(mii_info, MII_BMSR);
- if ((status & BMSR_LSTATUS) == 0)
- mii_info->link = 0;
- else
- mii_info->link = 1;
-
- /* If we are autonegotiating, and not done,
- * return an error */
- if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE))
- return -EAGAIN;
-
- return 0;
-}
-
-static int genmii_read_status(struct gfar_mii_info *mii_info)
-{
- u16 status;
- int err;
-
- /* Update the link, but return if there
- * was an error */
- err = genmii_update_link(mii_info);
- if (err)
- return err;
-
- if (mii_info->autoneg) {
- status = phy_read(mii_info, MII_LPA);
-
- if (status & (LPA_10FULL | LPA_100FULL))
- mii_info->duplex = DUPLEX_FULL;
- else
- mii_info->duplex = DUPLEX_HALF;
- if (status & (LPA_100FULL | LPA_100HALF))
- mii_info->speed = SPEED_100;
- else
- mii_info->speed = SPEED_10;
- mii_info->pause = 0;
- }
- /* On non-aneg, we assume what we put in BMCR is the speed,
- * though magic-aneg shouldn't prevent this case from occurring
- */
-
- return 0;
-}
-static int marvell_read_status(struct gfar_mii_info *mii_info)
-{
- u16 status;
- int err;
-
- /* Update the link, but return if there
- * was an error */
- err = genmii_update_link(mii_info);
- if (err)
- return err;
-
- /* If the link is up, read the speed and duplex */
- /* If we aren't autonegotiating, assume speeds
- * are as set */
- if (mii_info->autoneg && mii_info->link) {
- int speed;
- status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
-
-#if 0
- /* If speed and duplex aren't resolved,
- * return an error. Isn't this handled
- * by checking aneg?
- */
- if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0)
- return -EAGAIN;
-#endif
-
- /* Get the duplexity */
- if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
- mii_info->duplex = DUPLEX_FULL;
- else
- mii_info->duplex = DUPLEX_HALF;
-
- /* Get the speed */
- speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK;
- switch(speed) {
- case MII_M1011_PHY_SPEC_STATUS_1000:
- mii_info->speed = SPEED_1000;
- break;
- case MII_M1011_PHY_SPEC_STATUS_100:
- mii_info->speed = SPEED_100;
- break;
- default:
- mii_info->speed = SPEED_10;
- break;
- }
- mii_info->pause = 0;
- }
-
- return 0;
-}
-
-
-static int cis820x_read_status(struct gfar_mii_info *mii_info)
-{
- u16 status;
- int err;
-
- /* Update the link, but return if there
- * was an error */
- err = genmii_update_link(mii_info);
- if (err)
- return err;
-
- /* If the link is up, read the speed and duplex */
- /* If we aren't autonegotiating, assume speeds
- * are as set */
- if (mii_info->autoneg && mii_info->link) {
- int speed;
-
- status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT);
- if (status & MII_CIS8201_AUXCONSTAT_DUPLEX)
- mii_info->duplex = DUPLEX_FULL;
- else
- mii_info->duplex = DUPLEX_HALF;
-
- speed = status & MII_CIS8201_AUXCONSTAT_SPEED;
-
- switch (speed) {
- case MII_CIS8201_AUXCONSTAT_GBIT:
- mii_info->speed = SPEED_1000;
- break;
- case MII_CIS8201_AUXCONSTAT_100:
- mii_info->speed = SPEED_100;
- break;
- default:
- mii_info->speed = SPEED_10;
- break;
- }
- }
-
- return 0;
-}
-
-static int marvell_ack_interrupt(struct gfar_mii_info *mii_info)
-{
- /* Clear the interrupts by reading the reg */
- phy_read(mii_info, MII_M1011_IEVENT);
-
- return 0;
-}
-
-static int marvell_config_intr(struct gfar_mii_info *mii_info)
-{
- if(mii_info->interrupts == MII_INTERRUPT_ENABLED)
- phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
- else
- phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
-
- return 0;
-}
-
-static int cis820x_init(struct gfar_mii_info *mii_info)
-{
- phy_write(mii_info, MII_CIS8201_AUX_CONSTAT,
- MII_CIS8201_AUXCONSTAT_INIT);
- phy_write(mii_info, MII_CIS8201_EXT_CON1,
- MII_CIS8201_EXTCON1_INIT);
-
- return 0;
-}
-
-static int cis820x_ack_interrupt(struct gfar_mii_info *mii_info)
-{
- phy_read(mii_info, MII_CIS8201_ISTAT);
-
- return 0;
-}
-
-static int cis820x_config_intr(struct gfar_mii_info *mii_info)
-{
- if(mii_info->interrupts == MII_INTERRUPT_ENABLED)
- phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK);
- else
- phy_write(mii_info, MII_CIS8201_IMASK, 0);
-
- return 0;
-}
-
-#define DM9161_DELAY 10
-
-static int dm9161_read_status(struct gfar_mii_info *mii_info)
-{
- u16 status;
- int err;
-
- /* Update the link, but return if there
- * was an error */
- err = genmii_update_link(mii_info);
- if (err)
- return err;
-
- /* If the link is up, read the speed and duplex */
- /* If we aren't autonegotiating, assume speeds
- * are as set */
- if (mii_info->autoneg && mii_info->link) {
- status = phy_read(mii_info, MII_DM9161_SCSR);
- if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
- mii_info->speed = SPEED_100;
- else
- mii_info->speed = SPEED_10;
-
- if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F))
- mii_info->duplex = DUPLEX_FULL;
- else
- mii_info->duplex = DUPLEX_HALF;
- }
-
- return 0;
-}
-
-
-static int dm9161_config_aneg(struct gfar_mii_info *mii_info)
-{
- struct dm9161_private *priv = mii_info->priv;
-
- if(0 == priv->resetdone)
- return -EAGAIN;
-
- return 0;
-}
-
-static void dm9161_timer(unsigned long data)
-{
- struct gfar_mii_info *mii_info = (struct gfar_mii_info *)data;
- struct dm9161_private *priv = mii_info->priv;
- u16 status = phy_read(mii_info, MII_BMSR);
-
- if (status & BMSR_ANEGCOMPLETE) {
- priv->resetdone = 1;
- } else
- mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
-}
-
-static int dm9161_init(struct gfar_mii_info *mii_info)
-{
- struct dm9161_private *priv;
-
- /* Allocate the private data structure */
- priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL);
-
- if (NULL == priv)
- return -ENOMEM;
-
- mii_info->priv = priv;
-
- /* Reset is not done yet */
- priv->resetdone = 0;
-
- /* Isolate the PHY */
- phy_write(mii_info, MII_BMCR, BMCR_ISOLATE);
-
- /* Do not bypass the scrambler/descrambler */
- phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
-
- /* Clear 10BTCSR to default */
- phy_write(mii_info, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT);
-
- /* Reconnect the PHY, and enable Autonegotiation */
- phy_write(mii_info, MII_BMCR, BMCR_ANENABLE);
-
- /* Start a timer for DM9161_DELAY seconds to wait
- * for the PHY to be ready */
- init_timer(&priv->timer);
- priv->timer.function = &dm9161_timer;
- priv->timer.data = (unsigned long) mii_info;
- mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
-
- return 0;
-}
-
-static void dm9161_close(struct gfar_mii_info *mii_info)
-{
- struct dm9161_private *priv = mii_info->priv;
-
- del_timer_sync(&priv->timer);
- kfree(priv);
-}
-
-#if 0
-static int dm9161_ack_interrupt(struct gfar_mii_info *mii_info)
-{
- phy_read(mii_info, MII_DM9161_INTR);
-
- return 0;
-}
-#endif
-
-/* Cicada 820x */
-static struct phy_info phy_info_cis820x = {
- 0x000fc440,
- "Cicada Cis8204",
- 0x000fffc0,
- .features = MII_GBIT_FEATURES,
- .init = &cis820x_init,
- .config_aneg = &gbit_config_aneg,
- .read_status = &cis820x_read_status,
- .ack_interrupt = &cis820x_ack_interrupt,
- .config_intr = &cis820x_config_intr,
-};
-
-static struct phy_info phy_info_dm9161 = {
- .phy_id = 0x0181b880,
- .name = "Davicom DM9161E",
- .phy_id_mask = 0x0ffffff0,
- .init = dm9161_init,
- .config_aneg = dm9161_config_aneg,
- .read_status = dm9161_read_status,
- .close = dm9161_close,
-};
-
-static struct phy_info phy_info_marvell = {
- .phy_id = 0x01410c00,
- .phy_id_mask = 0xffffff00,
- .name = "Marvell 88E1101/88E1111",
- .features = MII_GBIT_FEATURES,
- .config_aneg = &marvell_config_aneg,
- .read_status = &marvell_read_status,
- .ack_interrupt = &marvell_ack_interrupt,
- .config_intr = &marvell_config_intr,
-};
-
-static struct phy_info phy_info_genmii= {
- .phy_id = 0x00000000,
- .phy_id_mask = 0x00000000,
- .name = "Generic MII",
- .features = MII_BASIC_FEATURES,
- .config_aneg = genmii_config_aneg,
- .read_status = genmii_read_status,
-};
-
-static struct phy_info *phy_info[] = {
- &phy_info_cis820x,
- &phy_info_marvell,
- &phy_info_dm9161,
- &phy_info_genmii,
- NULL
-};
-
-u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum)
-{
- u16 retval;
- unsigned long flags;
-
- spin_lock_irqsave(&mii_info->mdio_lock, flags);
- retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum);
- spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
-
- return retval;
-}
-
-void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&mii_info->mdio_lock, flags);
- mii_info->mdio_write(mii_info->dev,
- mii_info->mii_id,
- regnum, val);
- spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
-}
-
-/* Use the PHY ID registers to determine what type of PHY is attached
- * to device dev. return a struct phy_info structure describing that PHY
- */
-struct phy_info * get_phy_info(struct gfar_mii_info *mii_info)
-{
- u16 phy_reg;
- u32 phy_ID;
- int i;
- struct phy_info *theInfo = NULL;
- struct net_device *dev = mii_info->dev;
-
- /* Grab the bits from PHYIR1, and put them in the upper half */
- phy_reg = phy_read(mii_info, MII_PHYSID1);
- phy_ID = (phy_reg & 0xffff) << 16;
-
- /* Grab the bits from PHYIR2, and put them in the lower half */
- phy_reg = phy_read(mii_info, MII_PHYSID2);
- phy_ID |= (phy_reg & 0xffff);
-
- /* loop through all the known PHY types, and find one that */
- /* matches the ID we read from the PHY. */
- for (i = 0; phy_info[i]; i++)
- if (phy_info[i]->phy_id ==
- (phy_ID & phy_info[i]->phy_id_mask)) {
- theInfo = phy_info[i];
- break;
- }
-
- /* This shouldn't happen, as we have generic PHY support */
- if (theInfo == NULL) {
- printk("%s: PHY id %x is not supported!\n", dev->name, phy_ID);
- return NULL;
- } else {
- printk("%s: PHY is %s (%x)\n", dev->name, theInfo->name,
- phy_ID);
- }
-
- return theInfo;
-}