summaryrefslogtreecommitdiff
path: root/drivers/net/phy/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/Kconfig')
-rw-r--r--drivers/net/phy/Kconfig405
1 files changed, 82 insertions, 323 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 1c5a10b672fc..698bea312adc 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -3,247 +3,6 @@
# PHY Layer Configuration
#
-menuconfig MDIO_DEVICE
- tristate "MDIO bus device drivers"
- help
- MDIO devices and driver infrastructure code.
-
-if MDIO_DEVICE
-
-config MDIO_BUS
- tristate
- default m if PHYLIB=m
- default MDIO_DEVICE
- help
- This internal symbol is used for link time dependencies and it
- reflects whether the mdio_bus/mdio_device code is built as a
- loadable module or built-in.
-
-if MDIO_BUS
-
-config MDIO_DEVRES
- tristate
-
-config MDIO_ASPEED
- tristate "ASPEED MDIO bus controller"
- depends on ARCH_ASPEED || COMPILE_TEST
- depends on OF_MDIO && HAS_IOMEM
- help
- This module provides a driver for the independent MDIO bus
- controllers found in the ASPEED AST2600 SoC. This is a driver for the
- third revision of the ASPEED MDIO register interface - the first two
- revisions are the "old" and "new" interfaces found in the AST2400 and
- AST2500, embedded in the MAC. For legacy reasons, FTGMAC100 driver
- continues to drive the embedded MDIO controller for the AST2400 and
- AST2500 SoCs, so say N if AST2600 support is not required.
-
-config MDIO_BCM_IPROC
- tristate "Broadcom iProc MDIO bus controller"
- depends on ARCH_BCM_IPROC || COMPILE_TEST
- depends on HAS_IOMEM && OF_MDIO
- default ARCH_BCM_IPROC
- help
- This module provides a driver for the MDIO busses found in the
- Broadcom iProc SoC's.
-
-config MDIO_BCM_UNIMAC
- tristate "Broadcom UniMAC MDIO bus controller"
- depends on HAS_IOMEM
- help
- This module provides a driver for the Broadcom UniMAC MDIO busses.
- This hardware can be found in the Broadcom GENET Ethernet MAC
- controllers as well as some Broadcom Ethernet switches such as the
- Starfighter 2 switches.
-
-config MDIO_BITBANG
- tristate "Bitbanged MDIO buses"
- help
- This module implements the MDIO bus protocol in software,
- for use by low level drivers that export the ability to
- drive the relevant pins.
-
- If in doubt, say N.
-
-config MDIO_BUS_MUX
- tristate
- depends on OF_MDIO
- help
- This module provides a driver framework for MDIO bus
- multiplexers which connect one of several child MDIO busses
- to a parent bus. Switching between child busses is done by
- device specific drivers.
-
-config MDIO_BUS_MUX_BCM_IPROC
- tristate "Broadcom iProc based MDIO bus multiplexers"
- depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
- select MDIO_BUS_MUX
- default ARCH_BCM_IPROC
- help
- This module provides a driver for MDIO bus multiplexers found in
- iProc based Broadcom SoCs. This multiplexer connects one of several
- child MDIO bus to a parent bus. Buses could be internal as well as
- external and selection logic lies inside the same multiplexer.
-
-config MDIO_BUS_MUX_GPIO
- tristate "GPIO controlled MDIO bus multiplexers"
- depends on OF_GPIO && OF_MDIO
- select MDIO_BUS_MUX
- help
- This module provides a driver for MDIO bus multiplexers that
- are controlled via GPIO lines. The multiplexer connects one of
- several child MDIO busses to a parent bus. Child bus
- selection is under the control of GPIO lines.
-
-config MDIO_BUS_MUX_MESON_G12A
- tristate "Amlogic G12a based MDIO bus multiplexer"
- depends on ARCH_MESON || COMPILE_TEST
- depends on OF_MDIO && HAS_IOMEM && COMMON_CLK
- select MDIO_BUS_MUX
- default m if ARCH_MESON
- help
- This module provides a driver for the MDIO multiplexer/glue of
- the amlogic g12a SoC. The multiplexers connects either the external
- or the internal MDIO bus to the parent bus.
-
-config MDIO_BUS_MUX_MMIOREG
- tristate "MMIO device-controlled MDIO bus multiplexers"
- depends on OF_MDIO && HAS_IOMEM
- select MDIO_BUS_MUX
- help
- This module provides a driver for MDIO bus multiplexers that
- are controlled via a simple memory-mapped device, like an FPGA.
- The multiplexer connects one of several child MDIO busses to a
- parent bus. Child bus selection is under the control of one of
- the FPGA's registers.
-
- Currently, only 8/16/32 bits registers are supported.
-
-config MDIO_BUS_MUX_MULTIPLEXER
- tristate "MDIO bus multiplexer using kernel multiplexer subsystem"
- depends on OF_MDIO
- select MULTIPLEXER
- select MDIO_BUS_MUX
- help
- This module provides a driver for MDIO bus multiplexer
- that is controlled via the kernel multiplexer subsystem. The
- bus multiplexer connects one of several child MDIO busses to
- a parent bus. Child bus selection is under the control of
- the kernel multiplexer subsystem.
-
-config MDIO_CAVIUM
- tristate
-
-config MDIO_GPIO
- tristate "GPIO lib-based bitbanged MDIO buses"
- depends on MDIO_BITBANG
- depends on GPIOLIB || COMPILE_TEST
- help
- Supports GPIO lib-based MDIO busses.
-
- To compile this driver as a module, choose M here: the module
- will be called mdio-gpio.
-
-config MDIO_HISI_FEMAC
- tristate "Hisilicon FEMAC MDIO bus controller"
- depends on HAS_IOMEM && OF_MDIO
- help
- This module provides a driver for the MDIO busses found in the
- Hisilicon SoC that have an Fast Ethernet MAC.
-
-config MDIO_I2C
- tristate
- depends on I2C
- help
- Support I2C based PHYs. This provides a MDIO bus bridged
- to I2C to allow PHYs connected in I2C mode to be accessed
- using the existing infrastructure.
-
- This is library mode.
-
-config MDIO_IPQ4019
- tristate "Qualcomm IPQ4019 MDIO interface support"
- depends on HAS_IOMEM && OF_MDIO
- help
- This driver supports the MDIO interface found in Qualcomm
- IPQ40xx series Soc-s.
-
-config MDIO_IPQ8064
- tristate "Qualcomm IPQ8064 MDIO interface support"
- depends on HAS_IOMEM && OF_MDIO
- depends on MFD_SYSCON
- help
- This driver supports the MDIO interface found in the network
- interface units of the IPQ8064 SoC
-
-config MDIO_MOXART
- tristate "MOXA ART MDIO interface support"
- depends on ARCH_MOXART || COMPILE_TEST
- help
- This driver supports the MDIO interface found in the network
- interface units of the MOXA ART SoC
-
-config MDIO_MSCC_MIIM
- tristate "Microsemi MIIM interface support"
- depends on HAS_IOMEM
- select MDIO_DEVRES
- help
- This driver supports the MIIM (MDIO) interface found in the network
- switches of the Microsemi SoCs; it is recommended to switch on
- CONFIG_HIGH_RES_TIMERS
-
-config MDIO_MVUSB
- tristate "Marvell USB to MDIO Adapter"
- depends on USB
- select MDIO_DEVRES
- help
- A USB to MDIO converter present on development boards for
- Marvell's Link Street family of Ethernet switches.
-
-config MDIO_OCTEON
- tristate "Octeon and some ThunderX SOCs MDIO buses"
- depends on (64BIT && OF_MDIO) || COMPILE_TEST
- depends on HAS_IOMEM
- select MDIO_CAVIUM
- help
- This module provides a driver for the Octeon and ThunderX MDIO
- buses. It is required by the Octeon and ThunderX ethernet device
- drivers on some systems.
-
-config MDIO_SUN4I
- tristate "Allwinner sun4i MDIO interface support"
- depends on ARCH_SUNXI || COMPILE_TEST
- help
- This driver supports the MDIO interface found in the network
- interface units of the Allwinner SoC that have an EMAC (A10,
- A12, A10s, etc.)
-
-config MDIO_THUNDER
- tristate "ThunderX SOCs MDIO buses"
- depends on 64BIT
- depends on PCI
- select MDIO_CAVIUM
- select MDIO_DEVRES
- help
- This driver supports the MDIO interfaces found on Cavium
- ThunderX SoCs when the MDIO bus device appears as a PCI
- device.
-
-config MDIO_XGENE
- tristate "APM X-Gene SoC MDIO bus controller"
- depends on ARCH_XGENE || COMPILE_TEST
- help
- This module provides a driver for the MDIO busses found in the
- APM X-Gene SoC's.
-
-config MDIO_XPCS
- tristate "Synopsys DesignWare XPCS controller"
- help
- This module provides helper functions for Synopsys DesignWare XPCS
- controllers.
-
-endif
-endif
-
config PHYLINK
tristate
depends on NETDEVICES
@@ -286,7 +45,15 @@ config LED_TRIGGER_PHY
for any speed known to the PHY.
-comment "MII PHY device drivers"
+config FIXED_PHY
+ tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB
+ select SWPHY
+ help
+ Adds the platform "fixed" MDIO Bus to cover the boards that use
+ PHYs that are not connected to the real MDIO bus.
+
+ Currently tested with mpc866ads and mpc8349e-mitx.
config SFP
tristate "SFP cage support"
@@ -294,6 +61,19 @@ config SFP
depends on HWMON || HWMON=n
select MDIO_I2C
+comment "MII PHY device drivers"
+
+config AMD_PHY
+ tristate "AMD PHYs"
+ help
+ Currently supports the am79c874
+
+config MESON_GXL_PHY
+ tristate "Amlogic Meson GXL Internal PHY"
+ depends on ARCH_MESON || COMPILE_TEST
+ help
+ Currently has a driver for the Amlogic Meson GXL Internal PHY
+
config ADIN_PHY
tristate "Analog Devices Industrial Ethernet PHYs"
help
@@ -303,11 +83,6 @@ config ADIN_PHY
- ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit
Ethernet PHY
-config AMD_PHY
- tristate "AMD PHYs"
- help
- Currently supports the am79c874
-
config AQUANTIA_PHY
tristate "Aquantia PHYs"
help
@@ -319,6 +94,24 @@ config AX88796B_PHY
Currently supports the Asix Electronics PHY found in the X-Surf 100
AX88796B package.
+config BROADCOM_PHY
+ tristate "Broadcom 54XX PHYs"
+ select BCM_NET_PHYLIB
+ help
+ Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
+ BCM5481, BCM54810 and BCM5482 PHYs.
+
+config BCM54140_PHY
+ tristate "Broadcom BCM54140 PHY"
+ depends on PHYLIB
+ depends on HWMON || HWMON=n
+ select BCM_NET_PHYLIB
+ help
+ Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY.
+
+ This driver also supports the hardware monitoring of this PHY and
+ exposes voltage and temperature sensors.
+
config BCM63XX_PHY
tristate "Broadcom 63xx SOCs internal PHY"
depends on BCM63XX || COMPILE_TEST
@@ -333,6 +126,12 @@ config BCM7XXX_PHY
Currently supports the BCM7366, BCM7439, BCM7445, and
40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
+config BCM84881_PHY
+ tristate "Broadcom BCM84881 PHY"
+ depends on PHYLIB
+ help
+ Support the Broadcom BCM84881 PHY.
+
config BCM87XX_PHY
tristate "Broadcom BCM8706 and BCM8727 PHYs"
help
@@ -354,30 +153,6 @@ config BCM_CYGNUS_PHY
config BCM_NET_PHYLIB
tristate
-config BROADCOM_PHY
- tristate "Broadcom PHYs"
- select BCM_NET_PHYLIB
- help
- Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
- BCM5481, BCM54810 and BCM5482 PHYs.
-
-config BCM54140_PHY
- tristate "Broadcom BCM54140 PHY"
- depends on PHYLIB
- depends on HWMON || HWMON=n
- select BCM_NET_PHYLIB
- help
- Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY.
-
- This driver also supports the hardware monitoring of this PHY and
- exposes voltage and temperature sensors.
-
-config BCM84881_PHY
- tristate "Broadcom BCM84881 PHY"
- depends on PHYLIB
- help
- Support the Broadcom BCM84881 PHY.
-
config CICADA_PHY
tristate "Cicada PHYs"
help
@@ -393,48 +168,16 @@ config DAVICOM_PHY
help
Currently supports dm9161e and dm9131
-config DP83822_PHY
- tristate "Texas Instruments DP83822/825/826 PHYs"
- help
- Supports the DP83822, DP83825I, DP83825CM, DP83825CS, DP83825S,
- DP83826C and DP83826NC PHYs.
-
-config DP83TC811_PHY
- tristate "Texas Instruments DP83TC811 PHY"
- help
- Supports the DP83TC811 PHY.
-
-config DP83848_PHY
- tristate "Texas Instruments DP83848 PHY"
- help
- Supports the DP83848 PHY.
-
-config DP83867_PHY
- tristate "Texas Instruments DP83867 Gigabit PHY"
- help
- Currently supports the DP83867 PHY.
-
-config DP83869_PHY
- tristate "Texas Instruments DP83869 Gigabit PHY"
- help
- Currently supports the DP83869 PHY. This PHY supports copper and
- fiber connections.
-
-config FIXED_PHY
- tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
- depends on PHYLIB
- select SWPHY
- help
- Adds the platform "fixed" MDIO Bus to cover the boards that use
- PHYs that are not connected to the real MDIO bus.
-
- Currently tested with mpc866ads and mpc8349e-mitx.
-
config ICPLUS_PHY
tristate "ICPlus PHYs"
help
Currently supports the IP175C and IP1001 PHYs.
+config LXT_PHY
+ tristate "Intel LXT PHYs"
+ help
+ Currently supports the lxt970, lxt971
+
config INTEL_XWAY_PHY
tristate "Intel XWAY PHYs"
help
@@ -448,27 +191,16 @@ config LSI_ET1011C_PHY
help
Supports the LSI ET1011C PHY.
-config LXT_PHY
- tristate "Intel LXT PHYs"
- help
- Currently supports the lxt970, lxt971
-
config MARVELL_PHY
- tristate "Marvell PHYs"
+ tristate "Marvell Alaska PHYs"
help
- Currently has a driver for the 88E1011S
+ Currently has a driver for the 88E1XXX
config MARVELL_10G_PHY
tristate "Marvell Alaska 10Gbit PHYs"
help
Support for the Marvell Alaska MV88X3310 and compatible PHYs.
-config MESON_GXL_PHY
- tristate "Amlogic Meson GXL Internal PHY"
- depends on ARCH_MESON || COMPILE_TEST
- help
- Currently has a driver for the Amlogic Meson GXL Internal PHY
-
config MICREL_PHY
tristate "Micrel PHYs"
help
@@ -519,12 +251,12 @@ config REALTEK_PHY
Supports the Realtek 821x PHY.
config RENESAS_PHY
- tristate "Driver for Renesas PHYs"
+ tristate "Renesas PHYs"
help
Supports the Renesas PHYs uPD60620 and uPD60620A.
config ROCKCHIP_PHY
- tristate "Driver for Rockchip Ethernet PHYs"
+ tristate "Rockchip Ethernet PHYs"
help
Currently supports the integrated Ethernet PHY.
@@ -543,6 +275,33 @@ config TERANETICS_PHY
help
Currently supports the Teranetics TN2020
+config DP83822_PHY
+ tristate "Texas Instruments DP83822/825/826 PHYs"
+ help
+ Supports the DP83822, DP83825I, DP83825CM, DP83825CS, DP83825S,
+ DP83826C and DP83826NC PHYs.
+
+config DP83TC811_PHY
+ tristate "Texas Instruments DP83TC811 PHY"
+ help
+ Supports the DP83TC811 PHY.
+
+config DP83848_PHY
+ tristate "Texas Instruments DP83848 PHY"
+ help
+ Supports the DP83848 PHY.
+
+config DP83867_PHY
+ tristate "Texas Instruments DP83867 Gigabit PHY"
+ help
+ Currently supports the DP83867 PHY.
+
+config DP83869_PHY
+ tristate "Texas Instruments DP83869 Gigabit PHY"
+ help
+ Currently supports the DP83869 PHY. This PHY supports copper and
+ fiber connections.
+
config VITESSE_PHY
tristate "Vitesse PHYs"
help