diff options
Diffstat (limited to 'drivers/net/phy/aquantia/aquantia_main.c')
| -rw-r--r-- | drivers/net/phy/aquantia/aquantia_main.c | 432 |
1 files changed, 376 insertions, 56 deletions
diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c index 43886d2995e7..93c7a67cac9c 100644 --- a/drivers/net/phy/aquantia/aquantia_main.c +++ b/drivers/net/phy/aquantia/aquantia_main.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/bitfield.h> +#include <linux/of.h> #include <linux/phy.h> #include "aquantia.h" @@ -22,9 +23,15 @@ #define PHY_ID_AQR107 0x03a1b4e0 #define PHY_ID_AQCS109 0x03a1b5c2 #define PHY_ID_AQR405 0x03a1b4b0 +#define PHY_ID_AQR111 0x03a1b610 +#define PHY_ID_AQR111B0 0x03a1b612 #define PHY_ID_AQR112 0x03a1b662 #define PHY_ID_AQR412 0x03a1b712 +#define PHY_ID_AQR113 0x31c31c40 #define PHY_ID_AQR113C 0x31c31c12 +#define PHY_ID_AQR114C 0x31c31c22 +#define PHY_ID_AQR115C 0x31c31c33 +#define PHY_ID_AQR813 0x31c31cb2 #define MDIO_PHYXS_VEND_IF_STATUS 0xe812 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK GENMASK(7, 3) @@ -35,6 +42,7 @@ #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI 4 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII 6 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI 7 +#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_OFF 9 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII 10 #define MDIO_AN_VEND_PROV 0xc400 @@ -46,6 +54,12 @@ #define MDIO_AN_VEND_PROV_DOWNSHIFT_MASK GENMASK(3, 0) #define MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT 4 +#define MDIO_AN_RESVD_VEND_PROV 0xc410 +#define MDIO_AN_RESVD_VEND_PROV_MDIX_AUTO 0 +#define MDIO_AN_RESVD_VEND_PROV_MDIX_MDI 1 +#define MDIO_AN_RESVD_VEND_PROV_MDIX_MDIX 2 +#define MDIO_AN_RESVD_VEND_PROV_MDIX_MASK GENMASK(1, 0) + #define MDIO_AN_TX_VEND_STATUS1 0xc800 #define MDIO_AN_TX_VEND_STATUS1_RATE_MASK GENMASK(3, 1) #define MDIO_AN_TX_VEND_STATUS1_10BASET 0 @@ -56,6 +70,9 @@ #define MDIO_AN_TX_VEND_STATUS1_5000BASET 5 #define MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX BIT(0) +#define MDIO_AN_RESVD_VEND_STATUS1 0xc810 +#define MDIO_AN_RESVD_VEND_STATUS1_MDIX BIT(8) + #define MDIO_AN_TX_VEND_INT_STATUS1 0xcc00 #define MDIO_AN_TX_VEND_INT_STATUS1_DOWNSHIFT BIT(1) @@ -65,6 +82,11 @@ #define MDIO_AN_TX_VEND_INT_MASK2 0xd401 #define MDIO_AN_TX_VEND_INT_MASK2_LINK BIT(0) +#define PMAPMD_RSVD_VEND_PROV 0xe400 +#define PMAPMD_RSVD_VEND_PROV_MDI_CONF GENMASK(1, 0) +#define PMAPMD_RSVD_VEND_PROV_MDI_REVERSE BIT(0) +#define PMAPMD_RSVD_VEND_PROV_MDI_FORCE BIT(1) + #define MDIO_AN_RX_LP_STAT1 0xe820 #define MDIO_AN_RX_LP_STAT1_1000BASET_FULL BIT(15) #define MDIO_AN_RX_LP_STAT1_1000BASET_HALF BIT(14) @@ -79,49 +101,12 @@ #define MDIO_AN_RX_VEND_STAT3 0xe832 #define MDIO_AN_RX_VEND_STAT3_AFR BIT(0) -/* MDIO_MMD_C22EXT */ -#define MDIO_C22EXT_STAT_SGMII_RX_GOOD_FRAMES 0xd292 -#define MDIO_C22EXT_STAT_SGMII_RX_BAD_FRAMES 0xd294 -#define MDIO_C22EXT_STAT_SGMII_RX_FALSE_CARRIER 0xd297 -#define MDIO_C22EXT_STAT_SGMII_TX_GOOD_FRAMES 0xd313 -#define MDIO_C22EXT_STAT_SGMII_TX_BAD_FRAMES 0xd315 -#define MDIO_C22EXT_STAT_SGMII_TX_FALSE_CARRIER 0xd317 -#define MDIO_C22EXT_STAT_SGMII_TX_COLLISIONS 0xd318 -#define MDIO_C22EXT_STAT_SGMII_TX_LINE_COLLISIONS 0xd319 -#define MDIO_C22EXT_STAT_SGMII_TX_FRAME_ALIGN_ERR 0xd31a -#define MDIO_C22EXT_STAT_SGMII_TX_RUNT_FRAMES 0xd31b - /* Sleep and timeout for checking if the Processor-Intensive * MDIO operation is finished */ #define AQR107_OP_IN_PROG_SLEEP 1000 #define AQR107_OP_IN_PROG_TIMEOUT 100000 -struct aqr107_hw_stat { - const char *name; - int reg; - int size; -}; - -#define SGMII_STAT(n, r, s) { n, MDIO_C22EXT_STAT_SGMII_ ## r, s } -static const struct aqr107_hw_stat aqr107_hw_stats[] = { - SGMII_STAT("sgmii_rx_good_frames", RX_GOOD_FRAMES, 26), - SGMII_STAT("sgmii_rx_bad_frames", RX_BAD_FRAMES, 26), - SGMII_STAT("sgmii_rx_false_carrier_events", RX_FALSE_CARRIER, 8), - SGMII_STAT("sgmii_tx_good_frames", TX_GOOD_FRAMES, 26), - SGMII_STAT("sgmii_tx_bad_frames", TX_BAD_FRAMES, 26), - SGMII_STAT("sgmii_tx_false_carrier_events", TX_FALSE_CARRIER, 8), - SGMII_STAT("sgmii_tx_collisions", TX_COLLISIONS, 8), - SGMII_STAT("sgmii_tx_line_collisions", TX_LINE_COLLISIONS, 8), - SGMII_STAT("sgmii_tx_frame_alignment_err", TX_FRAME_ALIGN_ERR, 16), - SGMII_STAT("sgmii_tx_runt_frames", TX_RUNT_FRAMES, 22), -}; -#define AQR107_SGMII_STAT_SZ ARRAY_SIZE(aqr107_hw_stats) - -struct aqr107_priv { - u64 sgmii_stats[AQR107_SGMII_STAT_SZ]; -}; - static int aqr107_get_sset_count(struct phy_device *phydev) { return AQR107_SGMII_STAT_SZ; @@ -179,12 +164,40 @@ static void aqr107_get_stats(struct phy_device *phydev, } } +static int aqr_set_mdix(struct phy_device *phydev, int mdix) +{ + u16 val = 0; + + switch (mdix) { + case ETH_TP_MDI: + val = MDIO_AN_RESVD_VEND_PROV_MDIX_MDI; + break; + case ETH_TP_MDI_X: + val = MDIO_AN_RESVD_VEND_PROV_MDIX_MDIX; + break; + case ETH_TP_MDI_AUTO: + case ETH_TP_MDI_INVALID: + default: + val = MDIO_AN_RESVD_VEND_PROV_MDIX_AUTO; + break; + } + + return phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_RESVD_VEND_PROV, + MDIO_AN_RESVD_VEND_PROV_MDIX_MASK, val); +} + static int aqr_config_aneg(struct phy_device *phydev) { bool changed = false; u16 reg; int ret; + ret = aqr_set_mdix(phydev, phydev->mdix_ctrl); + if (ret < 0) + return ret; + if (ret > 0) + changed = true; + if (phydev->autoneg == AUTONEG_DISABLE) return genphy_c45_pma_setup_forced(phydev); @@ -302,6 +315,21 @@ static int aqr_read_status(struct phy_device *phydev) val & MDIO_AN_RX_LP_STAT1_1000BASET_HALF); } + val = genphy_c45_aneg_done(phydev); + if (val < 0) + return val; + if (val) { + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RESVD_VEND_STATUS1); + if (val < 0) + return val; + if (val & MDIO_AN_RESVD_VEND_STATUS1_MDIX) + phydev->mdix = ETH_TP_MDI_X; + else + phydev->mdix = ETH_TP_MDI; + } else { + phydev->mdix = ETH_TP_MDI_INVALID; + } + return genphy_c45_read_status(phydev); } @@ -373,9 +401,19 @@ static int aqr107_read_status(struct phy_device *phydev) if (!phydev->link || phydev->autoneg == AUTONEG_DISABLE) return 0; - val = phy_read_mmd(phydev, MDIO_MMD_PHYXS, MDIO_PHYXS_VEND_IF_STATUS); - if (val < 0) - return val; + /** + * The status register is not immediately correct on line side link up. + * Poll periodically until it reflects the correct ON state. + * Only return fail for read error, timeout defaults to OFF state. + */ + ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_PHYXS, + MDIO_PHYXS_VEND_IF_STATUS, val, + (FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val) != + MDIO_PHYXS_VEND_IF_STATUS_TYPE_OFF), + AQR107_OP_IN_PROG_SLEEP, + AQR107_OP_IN_PROG_TIMEOUT, false); + if (ret && ret != -ETIMEDOUT) + return ret; switch (FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val)) { case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR: @@ -402,7 +440,9 @@ static int aqr107_read_status(struct phy_device *phydev) case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII: phydev->interface = PHY_INTERFACE_MODE_2500BASEX; break; + case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OFF: default: + phydev->link = false; phydev->interface = PHY_INTERFACE_MODE_NA; break; } @@ -466,6 +506,9 @@ static int aqr107_set_tunable(struct phy_device *phydev, } } +#define AQR_FW_WAIT_SLEEP_US 20000 +#define AQR_FW_WAIT_TIMEOUT_US 2000000 + /* If we configure settings whilst firmware is still initializing the chip, * then these settings may be overwritten. Therefore make sure chip * initialization has completed. Use presence of the firmware ID as @@ -473,13 +516,21 @@ static int aqr107_set_tunable(struct phy_device *phydev, * The chip also provides a "reset completed" bit, but it's cleared after * read. Therefore function would time out if called again. */ -static int aqr107_wait_reset_complete(struct phy_device *phydev) +int aqr_wait_reset_complete(struct phy_device *phydev) { - int val; + int ret, val; + + ret = read_poll_timeout(phy_read_mmd, val, val != 0, + AQR_FW_WAIT_SLEEP_US, AQR_FW_WAIT_TIMEOUT_US, + false, phydev, MDIO_MMD_VEND1, + VEND1_GLOBAL_FW_ID); + if (val < 0) { + phydev_err(phydev, "Failed to read VEND1_GLOBAL_FW_ID: %pe\n", + ERR_PTR(val)); + return val; + } - return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, - VEND1_GLOBAL_FW_ID, val, val != 0, - 20000, 2000000, false); + return ret; } static void aqr107_chip_info(struct phy_device *phydev) @@ -505,8 +556,33 @@ static void aqr107_chip_info(struct phy_device *phydev) fw_major, fw_minor, build_id, prov_id); } +static int aqr107_config_mdi(struct phy_device *phydev) +{ + struct device_node *np = phydev->mdio.dev.of_node; + u32 mdi_conf; + int ret; + + ret = of_property_read_u32(np, "marvell,mdi-cfg-order", &mdi_conf); + + /* Do nothing in case property "marvell,mdi-cfg-order" is not present */ + if (ret == -EINVAL || ret == -ENOSYS) + return 0; + + if (ret) + return ret; + + if (mdi_conf & ~PMAPMD_RSVD_VEND_PROV_MDI_REVERSE) + return -EINVAL; + + return phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, PMAPMD_RSVD_VEND_PROV, + PMAPMD_RSVD_VEND_PROV_MDI_CONF, + mdi_conf | PMAPMD_RSVD_VEND_PROV_MDI_FORCE); +} + static int aqr107_config_init(struct phy_device *phydev) { + struct aqr107_priv *priv = phydev->priv; + u32 led_idx; int ret; /* Check that the PHY interface type is compatible */ @@ -524,11 +600,32 @@ static int aqr107_config_init(struct phy_device *phydev) WARN(phydev->interface == PHY_INTERFACE_MODE_XGMII, "Your devicetree is out of date, please update it. The AQR107 family doesn't support XGMII, maybe you mean USXGMII.\n"); - ret = aqr107_wait_reset_complete(phydev); + ret = aqr_wait_reset_complete(phydev); if (!ret) aqr107_chip_info(phydev); - return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT); + ret = aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT); + if (ret) + return ret; + + ret = aqr107_config_mdi(phydev); + if (ret) + return ret; + + /* Restore LED polarity state after reset */ + for_each_set_bit(led_idx, &priv->leds_active_low, AQR_MAX_LEDS) { + ret = aqr_phy_led_active_low_set(phydev, led_idx, true); + if (ret) + return ret; + } + + for_each_set_bit(led_idx, &priv->leds_active_high, AQR_MAX_LEDS) { + ret = aqr_phy_led_active_low_set(phydev, led_idx, false); + if (ret) + return ret; + } + + return 0; } static int aqcs109_config_init(struct phy_device *phydev) @@ -540,16 +637,10 @@ static int aqcs109_config_init(struct phy_device *phydev) phydev->interface != PHY_INTERFACE_MODE_2500BASEX) return -ENODEV; - ret = aqr107_wait_reset_complete(phydev); + ret = aqr_wait_reset_complete(phydev); if (!ret) aqr107_chip_info(phydev); - /* AQCS109 belongs to a chip family partially supporting 10G and 5G. - * PMA speed ability bits are the same for all members of the family, - * AQCS109 however supports speeds up to 2.5G only. - */ - phy_set_max_speed(phydev, SPEED_2500); - return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT); } @@ -719,6 +810,50 @@ static int aqr107_fill_interface_modes(struct phy_device *phydev) return 0; } +static int aqr113c_fill_interface_modes(struct phy_device *phydev) +{ + int val, ret; + + /* It's been observed on some models that - when coming out of suspend + * - the FW signals that the PHY is ready but the GLOBAL_CFG registers + * continue on returning zeroes for some time. Let's poll the 100M + * register until it returns a real value as both 113c and 115c support + * this mode. + */ + ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, + VEND1_GLOBAL_CFG_100M, val, val != 0, + 1000, 100000, false); + if (ret) + return ret; + + return aqr107_fill_interface_modes(phydev); +} + +static int aqr115c_get_features(struct phy_device *phydev) +{ + unsigned long *supported = phydev->supported; + + /* PHY supports speeds up to 2.5G with autoneg. PMA capabilities + * are not useful. + */ + linkmode_or(supported, supported, phy_gbit_features); + linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, supported); + + return 0; +} + +static int aqr111_get_features(struct phy_device *phydev) +{ + /* PHY supports speeds up to 5G with autoneg. PMA capabilities + * are not useful. + */ + aqr115c_get_features(phydev); + linkmode_set_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, + phydev->supported); + + return 0; +} + static int aqr113c_config_init(struct phy_device *phydev) { int ret; @@ -727,7 +862,16 @@ static int aqr113c_config_init(struct phy_device *phydev) if (ret < 0) return ret; - return aqr107_fill_interface_modes(phydev); + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_TXDIS, + MDIO_PMD_TXDIS_GLOBAL); + if (ret) + return ret; + + ret = aqr107_wait_processor_intensive_op(phydev); + if (ret) + return ret; + + return aqr113c_fill_interface_modes(phydev); } static int aqr107_probe(struct phy_device *phydev) @@ -746,6 +890,7 @@ static int aqr107_probe(struct phy_device *phydev) return aqr_hwmon_probe(phydev); } + static int aqr113c_probe(struct phy_device *phydev) { unsigned long *supported = phydev->supported_interfaces; @@ -812,6 +957,11 @@ static struct phy_driver aqr_driver[] = { .get_strings = aqr107_get_strings, .get_stats = aqr107_get_stats, .link_change_notify = aqr107_link_change_notify, + .led_brightness_set = aqr_phy_led_brightness_set, + .led_hw_is_supported = aqr_phy_led_hw_is_supported, + .led_hw_control_set = aqr_phy_led_hw_control_set, + .led_hw_control_get = aqr_phy_led_hw_control_get, + .led_polarity_set = aqr_phy_led_polarity_set, }, { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109), @@ -830,7 +980,63 @@ static struct phy_driver aqr_driver[] = { .get_sset_count = aqr107_get_sset_count, .get_strings = aqr107_get_strings, .get_stats = aqr107_get_stats, + .get_features = aqr115c_get_features, + .link_change_notify = aqr107_link_change_notify, + .led_brightness_set = aqr_phy_led_brightness_set, + .led_hw_is_supported = aqr_phy_led_hw_is_supported, + .led_hw_control_set = aqr_phy_led_hw_control_set, + .led_hw_control_get = aqr_phy_led_hw_control_get, + .led_polarity_set = aqr_phy_led_polarity_set, +}, +{ + PHY_ID_MATCH_MODEL(PHY_ID_AQR111), + .name = "Aquantia AQR111", + .probe = aqr107_probe, + .get_rate_matching = aqr107_get_rate_matching, + .config_init = aqr107_config_init, + .config_aneg = aqr_config_aneg, + .config_intr = aqr_config_intr, + .handle_interrupt = aqr_handle_interrupt, + .read_status = aqr107_read_status, + .get_tunable = aqr107_get_tunable, + .set_tunable = aqr107_set_tunable, + .suspend = aqr107_suspend, + .resume = aqr107_resume, + .get_sset_count = aqr107_get_sset_count, + .get_strings = aqr107_get_strings, + .get_stats = aqr107_get_stats, + .get_features = aqr111_get_features, + .link_change_notify = aqr107_link_change_notify, + .led_brightness_set = aqr_phy_led_brightness_set, + .led_hw_is_supported = aqr_phy_led_hw_is_supported, + .led_hw_control_set = aqr_phy_led_hw_control_set, + .led_hw_control_get = aqr_phy_led_hw_control_get, + .led_polarity_set = aqr_phy_led_polarity_set, +}, +{ + PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0), + .name = "Aquantia AQR111B0", + .probe = aqr107_probe, + .get_rate_matching = aqr107_get_rate_matching, + .config_init = aqr107_config_init, + .config_aneg = aqr_config_aneg, + .config_intr = aqr_config_intr, + .handle_interrupt = aqr_handle_interrupt, + .read_status = aqr107_read_status, + .get_tunable = aqr107_get_tunable, + .set_tunable = aqr107_set_tunable, + .suspend = aqr107_suspend, + .resume = aqr107_resume, + .get_sset_count = aqr107_get_sset_count, + .get_strings = aqr107_get_strings, + .get_stats = aqr107_get_stats, + .get_features = aqr111_get_features, .link_change_notify = aqr107_link_change_notify, + .led_brightness_set = aqr_phy_led_brightness_set, + .led_hw_is_supported = aqr_phy_led_hw_is_supported, + .led_hw_control_set = aqr_phy_led_hw_control_set, + .led_hw_control_get = aqr_phy_led_hw_control_get, + .led_polarity_set = aqr_phy_led_polarity_set, }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR405), @@ -857,6 +1063,11 @@ static struct phy_driver aqr_driver[] = { .get_strings = aqr107_get_strings, .get_stats = aqr107_get_stats, .link_change_notify = aqr107_link_change_notify, + .led_brightness_set = aqr_phy_led_brightness_set, + .led_hw_is_supported = aqr_phy_led_hw_is_supported, + .led_hw_control_set = aqr_phy_led_hw_control_set, + .led_hw_control_get = aqr_phy_led_hw_control_get, + .led_polarity_set = aqr_phy_led_polarity_set, }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR412), @@ -877,6 +1088,30 @@ static struct phy_driver aqr_driver[] = { .link_change_notify = aqr107_link_change_notify, }, { + PHY_ID_MATCH_MODEL(PHY_ID_AQR113), + .name = "Aquantia AQR113", + .probe = aqr107_probe, + .get_rate_matching = aqr107_get_rate_matching, + .config_init = aqr113c_config_init, + .config_aneg = aqr_config_aneg, + .config_intr = aqr_config_intr, + .handle_interrupt = aqr_handle_interrupt, + .read_status = aqr107_read_status, + .get_tunable = aqr107_get_tunable, + .set_tunable = aqr107_set_tunable, + .suspend = aqr107_suspend, + .resume = aqr107_resume, + .get_sset_count = aqr107_get_sset_count, + .get_strings = aqr107_get_strings, + .get_stats = aqr107_get_stats, + .link_change_notify = aqr107_link_change_notify, + .led_brightness_set = aqr_phy_led_brightness_set, + .led_hw_is_supported = aqr_phy_led_hw_is_supported, + .led_hw_control_set = aqr_phy_led_hw_control_set, + .led_hw_control_get = aqr_phy_led_hw_control_get, + .led_polarity_set = aqr_phy_led_polarity_set, +}, +{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C), .name = "Aquantia AQR113C", .probe = aqr113c_probe, @@ -894,12 +1129,91 @@ static struct phy_driver aqr_driver[] = { .get_strings = aqr107_get_strings, .get_stats = aqr107_get_stats, .link_change_notify = aqr107_link_change_notify, + .led_brightness_set = aqr_phy_led_brightness_set, + .led_hw_is_supported = aqr_phy_led_hw_is_supported, + .led_hw_control_set = aqr_phy_led_hw_control_set, + .led_hw_control_get = aqr_phy_led_hw_control_get, + .led_polarity_set = aqr_phy_led_polarity_set, +}, +{ + PHY_ID_MATCH_MODEL(PHY_ID_AQR114C), + .name = "Aquantia AQR114C", + .probe = aqr107_probe, + .get_rate_matching = aqr107_get_rate_matching, + .config_init = aqr107_config_init, + .config_aneg = aqr_config_aneg, + .config_intr = aqr_config_intr, + .handle_interrupt = aqr_handle_interrupt, + .read_status = aqr107_read_status, + .get_tunable = aqr107_get_tunable, + .set_tunable = aqr107_set_tunable, + .suspend = aqr107_suspend, + .resume = aqr107_resume, + .get_sset_count = aqr107_get_sset_count, + .get_strings = aqr107_get_strings, + .get_stats = aqr107_get_stats, + .get_features = aqr111_get_features, + .link_change_notify = aqr107_link_change_notify, + .led_brightness_set = aqr_phy_led_brightness_set, + .led_hw_is_supported = aqr_phy_led_hw_is_supported, + .led_hw_control_set = aqr_phy_led_hw_control_set, + .led_hw_control_get = aqr_phy_led_hw_control_get, + .led_polarity_set = aqr_phy_led_polarity_set, +}, +{ + PHY_ID_MATCH_MODEL(PHY_ID_AQR115C), + .name = "Aquantia AQR115C", + .probe = aqr107_probe, + .get_rate_matching = aqr107_get_rate_matching, + .config_init = aqr113c_config_init, + .config_aneg = aqr_config_aneg, + .config_intr = aqr_config_intr, + .handle_interrupt = aqr_handle_interrupt, + .read_status = aqr107_read_status, + .get_tunable = aqr107_get_tunable, + .set_tunable = aqr107_set_tunable, + .suspend = aqr107_suspend, + .resume = aqr107_resume, + .get_sset_count = aqr107_get_sset_count, + .get_strings = aqr107_get_strings, + .get_stats = aqr107_get_stats, + .get_features = aqr115c_get_features, + .link_change_notify = aqr107_link_change_notify, + .led_brightness_set = aqr_phy_led_brightness_set, + .led_hw_is_supported = aqr_phy_led_hw_is_supported, + .led_hw_control_set = aqr_phy_led_hw_control_set, + .led_hw_control_get = aqr_phy_led_hw_control_get, + .led_polarity_set = aqr_phy_led_polarity_set, +}, +{ + PHY_ID_MATCH_MODEL(PHY_ID_AQR813), + .name = "Aquantia AQR813", + .probe = aqr107_probe, + .get_rate_matching = aqr107_get_rate_matching, + .config_init = aqr107_config_init, + .config_aneg = aqr_config_aneg, + .config_intr = aqr_config_intr, + .handle_interrupt = aqr_handle_interrupt, + .read_status = aqr107_read_status, + .get_tunable = aqr107_get_tunable, + .set_tunable = aqr107_set_tunable, + .suspend = aqr107_suspend, + .resume = aqr107_resume, + .get_sset_count = aqr107_get_sset_count, + .get_strings = aqr107_get_strings, + .get_stats = aqr107_get_stats, + .link_change_notify = aqr107_link_change_notify, + .led_brightness_set = aqr_phy_led_brightness_set, + .led_hw_is_supported = aqr_phy_led_hw_is_supported, + .led_hw_control_set = aqr_phy_led_hw_control_set, + .led_hw_control_get = aqr_phy_led_hw_control_get, + .led_polarity_set = aqr_phy_led_polarity_set, }, }; module_phy_driver(aqr_driver); -static struct mdio_device_id __maybe_unused aqr_tbl[] = { +static const struct mdio_device_id __maybe_unused aqr_tbl[] = { { PHY_ID_MATCH_MODEL(PHY_ID_AQ1202) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQ2104) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR105) }, @@ -907,9 +1221,15 @@ static struct mdio_device_id __maybe_unused aqr_tbl[] = { { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR405) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR111) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR412) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR114C) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR115C) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR813) }, { } }; |