summaryrefslogtreecommitdiff
path: root/drivers/net/phy/broadcom.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/broadcom.c')
-rw-r--r--drivers/net/phy/broadcom.c69
1 files changed, 33 insertions, 36 deletions
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 9cd8b27d1292..a32dc5d11e89 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -74,27 +74,40 @@ static int bcm54612e_config_init(struct phy_device *phydev)
return 0;
}
-static int bcm54810_config(struct phy_device *phydev)
+static int bcm5481x_config(struct phy_device *phydev)
{
int rc, val;
- val = bcm_phy_read_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL);
- val &= ~BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN;
- rc = bcm_phy_write_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL,
- val);
- if (rc < 0)
- return rc;
-
+ /* handling PHY's internal RX clock delay */
val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
- val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
val |= MII_BCM54XX_AUXCTL_MISC_WREN;
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+ /* Disable RGMII RXC-RXD skew */
+ val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
+ }
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+ /* Enable RGMII RXC-RXD skew */
+ val |= MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
+ }
rc = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
val);
if (rc < 0)
return rc;
+ /* handling PHY's internal TX clock delay */
val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL);
- val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+ /* Disable internal TX clock delay */
+ val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
+ }
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+ /* Enable internal TX clock delay */
+ val |= BCM54810_SHD_CLK_CTL_GTXCLK_EN;
+ }
rc = bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
if (rc < 0)
return rc;
@@ -244,7 +257,7 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
static int bcm54xx_config_init(struct phy_device *phydev)
{
- int reg, err;
+ int reg, err, val;
reg = phy_read(phydev, MII_BCM54XX_ECR);
if (reg < 0)
@@ -283,8 +296,14 @@ static int bcm54xx_config_init(struct phy_device *phydev)
if (err)
return err;
} else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
- err = bcm54810_config(phydev);
- if (err)
+ /* For BCM54810, we need to disable BroadR-Reach function */
+ val = bcm_phy_read_exp(phydev,
+ BCM54810_EXP_BROADREACH_LRE_MISC_CTL);
+ val &= ~BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN;
+ err = bcm_phy_write_exp(phydev,
+ BCM54810_EXP_BROADREACH_LRE_MISC_CTL,
+ val);
+ if (err < 0)
return err;
}
@@ -392,29 +411,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
ret = genphy_config_aneg(phydev);
/* Then we can set up the delay. */
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
- u16 reg;
-
- /*
- * There is no BCM5481 specification available, so down
- * here is everything we know about "register 0x18". This
- * at least helps BCM5481 to successfully receive packets
- * on MPC8360E-RDK board. Peter Barada <peterb@logicpd.com>
- * says: "This sets delay between the RXD and RXC signals
- * instead of using trace lengths to achieve timing".
- */
-
- /* Set RDX clk delay. */
- reg = 0x7 | (0x7 << 12);
- phy_write(phydev, 0x18, reg);
-
- reg = phy_read(phydev, 0x18);
- /* Set RDX-RXC skew. */
- reg |= (1 << 8);
- /* Write bits 14:0. */
- reg |= (1 << 15);
- phy_write(phydev, 0x18, reg);
- }
+ bcm5481x_config(phydev);
if (of_property_read_bool(np, "enet-phy-lane-swap")) {
/* Lane Swap - Undocumented register...magic! */