summaryrefslogtreecommitdiff
path: root/drivers/net/phy/dp83867.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/dp83867.c')
-rw-r--r--drivers/net/phy/dp83867.c41
1 files changed, 37 insertions, 4 deletions
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index fd35131a0c39..c71c7d0f53f0 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -26,10 +26,18 @@
/* Extended Registers */
#define DP83867_CFG4 0x0031
+#define DP83867_CFG4_SGMII_ANEG_MASK (BIT(5) | BIT(6))
+#define DP83867_CFG4_SGMII_ANEG_TIMER_11MS (3 << 5)
+#define DP83867_CFG4_SGMII_ANEG_TIMER_800US (2 << 5)
+#define DP83867_CFG4_SGMII_ANEG_TIMER_2US (1 << 5)
+#define DP83867_CFG4_SGMII_ANEG_TIMER_16MS (0 << 5)
+
#define DP83867_RGMIICTL 0x0032
#define DP83867_STRAP_STS1 0x006E
#define DP83867_RGMIIDCTL 0x0086
#define DP83867_IO_MUX_CFG 0x0170
+#define DP83867_10M_SGMII_CFG 0x016F
+#define DP83867_10M_SGMII_RATE_ADAPT_MASK BIT(7)
#define DP83867_SW_RESET BIT(15)
#define DP83867_SW_RESTART BIT(14)
@@ -247,10 +255,8 @@ static int dp83867_config_init(struct phy_device *phydev)
ret = phy_write(phydev, MII_DP83867_PHYCTRL, val);
if (ret)
return ret;
- }
- if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) &&
- (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) {
+ /* Set up RGMII delays */
val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL);
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
@@ -277,6 +283,33 @@ static int dp83867_config_init(struct phy_device *phydev)
DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL);
}
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ /* For support SPEED_10 in SGMII mode
+ * DP83867_10M_SGMII_RATE_ADAPT bit
+ * has to be cleared by software. That
+ * does not affect SPEED_100 and
+ * SPEED_1000.
+ */
+ ret = phy_modify_mmd(phydev, DP83867_DEVADDR,
+ DP83867_10M_SGMII_CFG,
+ DP83867_10M_SGMII_RATE_ADAPT_MASK,
+ 0);
+ if (ret)
+ return ret;
+
+ /* After reset SGMII Autoneg timer is set to 2us (bits 6 and 5
+ * are 01). That is not enough to finalize autoneg on some
+ * devices. Increase this timer duration to maximum 16ms.
+ */
+ ret = phy_modify_mmd(phydev, DP83867_DEVADDR,
+ DP83867_CFG4,
+ DP83867_CFG4_SGMII_ANEG_MASK,
+ DP83867_CFG4_SGMII_ANEG_TIMER_16MS);
+
+ if (ret)
+ return ret;
+ }
+
/* Enable Interrupt output INT_OE in CFG3 register */
if (phy_interrupt_is_valid(phydev)) {
val = phy_read(phydev, DP83867_CFG3);
@@ -307,7 +340,7 @@ static int dp83867_phy_reset(struct phy_device *phydev)
usleep_range(10, 20);
- return dp83867_config_init(phydev);
+ return 0;
}
static struct phy_driver dp83867_driver[] = {