diff options
Diffstat (limited to 'drivers/net/phy/marvell10g.c')
-rw-r--r-- | drivers/net/phy/marvell10g.c | 91 |
1 files changed, 80 insertions, 11 deletions
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index ad43e280930c..eb05a578dbd7 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -27,6 +27,7 @@ #include <linux/delay.h> #include <linux/hwmon.h> #include <linux/marvell_phy.h> +#include <linux/of.h> #include <linux/phy.h> #include <linux/sfp.h> #include <linux/netdevice.h> @@ -82,6 +83,8 @@ enum { MV_PCS_CSSR1_SPD1_10 = 0x0000, MV_PCS_CSSR1_DUPLEX_FULL= BIT(13), MV_PCS_CSSR1_RESOLVED = BIT(11), + MV_PCS_CSSR1_TX_PAUSE = BIT(9), + MV_PCS_CSSR1_RX_PAUSE = BIT(8), MV_PCS_CSSR1_MDIX = BIT(6), MV_PCS_CSSR1_SPD2_MASK = 0x000c, MV_PCS_CSSR1_SPD2_5000 = 0x0008, @@ -163,14 +166,16 @@ struct mv3310_chip { }; struct mv3310_priv { - DECLARE_BITMAP(supported_interfaces, PHY_INTERFACE_MODE_MAX); const struct mv3310_mactype *mactype; u32 firmware_ver; bool has_downshift; + bool firmware_failed; struct device *hwmon_dev; char *hwmon_name; + u8 num_leds; + u16 led_mode[4]; }; static const struct mv3310_chip *to_mv3310_chip(struct phy_device *phydev) @@ -506,6 +511,43 @@ static const struct sfp_upstream_ops mv3310_sfp_ops = { .module_insert = mv3310_sfp_insert, }; +static int mv3310_leds_write(struct phy_device *phydev) +{ + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); + int i, ret; + + for (i = 0; i < priv->num_leds; i++) { + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, 0xf020 + i, + priv->led_mode[i]); + if (ret < 0) + return ret; + } + + return 0; +} + +static int mv3310_fw_config(struct phy_device *phydev) +{ + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); + struct device_node *node; + int ret; + + node = phydev->mdio.dev.of_node; + if (!node) + return 0; + + ret = of_property_read_variable_u16_array(node, "marvell,led-mode", + priv->led_mode, 1, ARRAY_SIZE(priv->led_mode)); + if (ret == -EINVAL) + ret = 0; + if (ret < 0) + return ret; + + priv->num_leds = ret; + + return 0; +} + static int mv3310_probe(struct phy_device *phydev) { const struct mv3310_chip *chip = to_mv3310_chip(phydev); @@ -517,6 +559,20 @@ static int mv3310_probe(struct phy_device *phydev) (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask) return -ENODEV; + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + dev_set_drvdata(&phydev->mdio.dev, priv); + + ret = mv3310_fw_config(phydev); + if (ret < 0) + return ret; + + ret = mv3310_leds_write(phydev); + if (ret < 0) + return ret; + ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_BOOT); if (ret < 0) return ret; @@ -524,15 +580,9 @@ static int mv3310_probe(struct phy_device *phydev) if (ret & MV_PMA_BOOT_FATAL) { dev_warn(&phydev->mdio.dev, "PHY failed to boot firmware, status=%04x\n", ret); - return -ENODEV; + priv->firmware_failed = true; } - priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - dev_set_drvdata(&phydev->mdio.dev, priv); - ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER0); if (ret < 0) return ret; @@ -561,7 +611,7 @@ static int mv3310_probe(struct phy_device *phydev) if (ret) return ret; - chip->init_supported_interfaces(priv->supported_interfaces); + chip->init_supported_interfaces(phydev->supported_interfaces); return phy_sfp_probe(phydev, &mv3310_sfp_ops); } @@ -587,6 +637,19 @@ static int mv3310_resume(struct phy_device *phydev) return mv3310_hwmon_config(phydev, true); } +static int mv3310_start(struct phy_device *phydev) +{ + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); + + if (priv->firmware_failed) { + dev_warn(&phydev->mdio.dev, + "PHY firmware failure: PHY not starting"); + return -EINVAL; + } + + return 0; +} + /* Some PHYs in the Alaska family such as the 88X3310 and the 88E2010 * don't set bit 14 in PMA Extended Abilities (1.11), although they do * support 2.5GBASET and 5GBASET. For these models, we can still read their @@ -826,7 +889,7 @@ static int mv3310_config_init(struct phy_device *phydev) int err, mactype; /* Check that the PHY interface type is compatible */ - if (!test_bit(phydev->interface, priv->supported_interfaces)) + if (!test_bit(phydev->interface, phydev->supported_interfaces)) return -ENODEV; phydev->mdix_ctrl = ETH_TP_MDI_AUTO; @@ -873,7 +936,7 @@ static int mv3310_config_init(struct phy_device *phydev) if (err && err != -EOPNOTSUPP) return err; - return 0; + return mv3310_leds_write(phydev); } static int mv3310_get_features(struct phy_device *phydev) @@ -1090,6 +1153,10 @@ static int mv3310_read_status_copper(struct phy_device *phydev) phydev->mdix = cssr1 & MV_PCS_CSSR1_MDIX ? ETH_TP_MDI_X : ETH_TP_MDI; + phydev->resolved_tx_pause = !!(cssr1 & MV_PCS_CSSR1_TX_PAUSE); + phydev->resolved_rx_pause = !!(cssr1 & MV_PCS_CSSR1_RX_PAUSE); + phydev->resolved_pause_valid = true; + if (val & MDIO_AN_STAT1_COMPLETE) { val = genphy_c45_read_lpa(phydev); if (val < 0) @@ -1432,6 +1499,7 @@ static struct phy_driver mv3310_drivers[] = { .probe = mv3310_probe, .suspend = mv3310_suspend, .resume = mv3310_resume, + .start = mv3310_start, .config_aneg = mv3310_config_aneg, .aneg_done = mv3310_aneg_done, .read_status = mv3310_read_status, @@ -1469,6 +1537,7 @@ static struct phy_driver mv3310_drivers[] = { .probe = mv3310_probe, .suspend = mv3310_suspend, .resume = mv3310_resume, + .start = mv3310_start, .config_init = mv3310_config_init, .config_aneg = mv3310_config_aneg, .aneg_done = mv3310_aneg_done, |