1 files changed, 33 insertions, 3 deletions

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 7621badae64d..95e3f4644aeb 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -33,6 +33,8 @@
 #define MV_PHY_ALASKA_NBT_QUIRK_REV	(MARVELL_PHY_ID_88X3310 | 0xa)
 
 enum {
+	MV_PMA_FW_VER0		= 0xc011,
+	MV_PMA_FW_VER1		= 0xc012,
 	MV_PMA_BOOT		= 0xc050,
 	MV_PMA_BOOT_FATAL	= BIT(0),
 
@@ -73,7 +75,8 @@ enum {
 
 	/* Vendor2 MMD registers */
 	MV_V2_PORT_CTRL		= 0xf001,
-	MV_V2_PORT_CTRL_PWRDOWN = 0x0800,
+	MV_V2_PORT_CTRL_SWRST	= BIT(15),
+	MV_V2_PORT_CTRL_PWRDOWN = BIT(11),
 	MV_V2_TEMP_CTRL		= 0xf08a,
 	MV_V2_TEMP_CTRL_MASK	= 0xc000,
 	MV_V2_TEMP_CTRL_SAMPLE	= 0x0000,
@@ -83,6 +86,8 @@ enum {
 };
 
 struct mv3310_priv {
+	u32 firmware_ver;
+
 	struct device *hwmon_dev;
 	char *hwmon_name;
 };
@@ -235,8 +240,17 @@ static int mv3310_power_down(struct phy_device *phydev)
 
 static int mv3310_power_up(struct phy_device *phydev)
 {
-	return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
-				  MV_V2_PORT_CTRL_PWRDOWN);
+	struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+	int ret;
+
+	ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
+				 MV_V2_PORT_CTRL_PWRDOWN);
+
+	if (priv->firmware_ver < 0x00030000)
+		return ret;
+
+	return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
+				MV_V2_PORT_CTRL_SWRST);
 }
 
 static int mv3310_reset(struct phy_device *phydev, u32 unit)
@@ -355,6 +369,22 @@ static int mv3310_probe(struct phy_device *phydev)
 
 	dev_set_drvdata(&phydev->mdio.dev, priv);
 
+	ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER0);
+	if (ret < 0)
+		return ret;
+
+	priv->firmware_ver = ret << 16;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER1);
+	if (ret < 0)
+		return ret;
+
+	priv->firmware_ver |= ret;
+
+	phydev_info(phydev, "Firmware version %u.%u.%u.%u\n",
+		    priv->firmware_ver >> 24, (priv->firmware_ver >> 16) & 255,
+		    (priv->firmware_ver >> 8) & 255, priv->firmware_ver & 255);
+
 	/* Powering down the port when not in use saves about 600mW */
 	ret = mv3310_power_down(phydev);
 	if (ret)