diff options
Diffstat (limited to 'drivers/net/phy/micrel.c')
| -rw-r--r-- | drivers/net/phy/micrel.c | 22 |
1 files changed, 22 insertions, 0 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 927d3d54658e..08e3915001c3 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -1733,6 +1733,28 @@ static int ksz886x_config_aneg(struct phy_device *phydev) if (ret) return ret; + if (phydev->autoneg != AUTONEG_ENABLE) { + /* When autonegotation is disabled, we need to manually force + * the link state. If we don't do this, the PHY will keep + * sending Fast Link Pulses (FLPs) which are part of the + * autonegotiation process. This is not desired when + * autonegotiation is off. + */ + ret = phy_set_bits(phydev, MII_KSZPHY_CTRL, + KSZ886X_CTRL_FORCE_LINK); + if (ret) + return ret; + } else { + /* If we had previously forced the link state, we need to + * clear KSZ886X_CTRL_FORCE_LINK bit now. Otherwise, the PHY + * will not perform autonegotiation. + */ + ret = phy_clear_bits(phydev, MII_KSZPHY_CTRL, + KSZ886X_CTRL_FORCE_LINK); + if (ret) + return ret; + } + /* The MDI-X configuration is automatically changed by the PHY after * switching from autoneg off to on. So, take MDI-X configuration under * own control and set it after autoneg configuration was done. |