summaryrefslogtreecommitdiff
path: root/drivers/net/phy/microchip_t1.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/microchip_t1.c')
-rw-r--r--drivers/net/phy/microchip_t1.c239
1 files changed, 239 insertions, 0 deletions
diff --git a/drivers/net/phy/microchip_t1.c b/drivers/net/phy/microchip_t1.c
index 4dc00bd5a8d2..a4de3d2081c5 100644
--- a/drivers/net/phy/microchip_t1.c
+++ b/drivers/net/phy/microchip_t1.c
@@ -6,6 +6,8 @@
#include <linux/delay.h>
#include <linux/mii.h>
#include <linux/phy.h>
+#include <linux/ethtool.h>
+#include <linux/ethtool_netlink.h>
/* External Register Control Register */
#define LAN87XX_EXT_REG_CTL (0x14)
@@ -35,8 +37,14 @@
#define PHYACC_ATTR_BANK_MISC 1
#define PHYACC_ATTR_BANK_PCS 2
#define PHYACC_ATTR_BANK_AFE 3
+#define PHYACC_ATTR_BANK_DSP 4
#define PHYACC_ATTR_BANK_MAX 7
+/* measurement defines */
+#define LAN87XX_CABLE_TEST_OK 0
+#define LAN87XX_CABLE_TEST_OPEN 1
+#define LAN87XX_CABLE_TEST_SAME_SHORT 2
+
#define DRIVER_AUTHOR "Nisar Sayed <nisar.sayed@microchip.com>"
#define DRIVER_DESC "Microchip LAN87XX T1 PHY driver"
@@ -226,11 +234,240 @@ static int lan87xx_config_init(struct phy_device *phydev)
return rc < 0 ? rc : 0;
}
+static int microchip_cable_test_start_common(struct phy_device *phydev)
+{
+ int bmcr, bmsr, ret;
+
+ /* If auto-negotiation is enabled, but not complete, the cable
+ * test never completes. So disable auto-neg.
+ */
+ bmcr = phy_read(phydev, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
+
+ bmsr = phy_read(phydev, MII_BMSR);
+
+ if (bmsr < 0)
+ return bmsr;
+
+ if (bmcr & BMCR_ANENABLE) {
+ ret = phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0);
+ if (ret < 0)
+ return ret;
+ ret = genphy_soft_reset(phydev);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* If the link is up, allow it some time to go down */
+ if (bmsr & BMSR_LSTATUS)
+ msleep(1500);
+
+ return 0;
+}
+
+static int lan87xx_cable_test_start(struct phy_device *phydev)
+{
+ static const struct access_ereg_val cable_test[] = {
+ /* min wait */
+ {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP, 93,
+ 0, 0},
+ /* max wait */
+ {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP, 94,
+ 10, 0},
+ /* pulse cycle */
+ {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP, 95,
+ 90, 0},
+ /* cable diag thresh */
+ {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP, 92,
+ 60, 0},
+ /* max gain */
+ {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP, 79,
+ 31, 0},
+ /* clock align for each iteration */
+ {PHYACC_ATTR_MODE_MODIFY, PHYACC_ATTR_BANK_DSP, 55,
+ 0, 0x0038},
+ /* max cycle wait config */
+ {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP, 94,
+ 70, 0},
+ /* start cable diag*/
+ {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP, 90,
+ 1, 0},
+ };
+ int rc, i;
+
+ rc = microchip_cable_test_start_common(phydev);
+ if (rc < 0)
+ return rc;
+
+ /* start cable diag */
+ /* check if part is alive - if not, return diagnostic error */
+ rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_SMI,
+ 0x00, 0);
+ if (rc < 0)
+ return rc;
+
+ /* master/slave specific configs */
+ rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_SMI,
+ 0x0A, 0);
+ if (rc < 0)
+ return rc;
+
+ if ((rc & 0x4000) != 0x4000) {
+ /* DUT is Slave */
+ rc = access_ereg_modify_changed(phydev, PHYACC_ATTR_BANK_AFE,
+ 0x0E, 0x5, 0x7);
+ if (rc < 0)
+ return rc;
+ rc = access_ereg_modify_changed(phydev, PHYACC_ATTR_BANK_SMI,
+ 0x1A, 0x8, 0x8);
+ if (rc < 0)
+ return rc;
+ } else {
+ /* DUT is Master */
+ rc = access_ereg_modify_changed(phydev, PHYACC_ATTR_BANK_SMI,
+ 0x10, 0x8, 0x40);
+ if (rc < 0)
+ return rc;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(cable_test); i++) {
+ if (cable_test[i].mode == PHYACC_ATTR_MODE_MODIFY) {
+ rc = access_ereg_modify_changed(phydev,
+ cable_test[i].bank,
+ cable_test[i].offset,
+ cable_test[i].val,
+ cable_test[i].mask);
+ /* wait 50ms */
+ msleep(50);
+ } else {
+ rc = access_ereg(phydev, cable_test[i].mode,
+ cable_test[i].bank,
+ cable_test[i].offset,
+ cable_test[i].val);
+ }
+ if (rc < 0)
+ return rc;
+ }
+ /* cable diag started */
+
+ return 0;
+}
+
+static int lan87xx_cable_test_report_trans(u32 result)
+{
+ switch (result) {
+ case LAN87XX_CABLE_TEST_OK:
+ return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+ case LAN87XX_CABLE_TEST_OPEN:
+ return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+ case LAN87XX_CABLE_TEST_SAME_SHORT:
+ return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+ default:
+ /* DIAGNOSTIC_ERROR */
+ return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+ }
+}
+
+static int lan87xx_cable_test_report(struct phy_device *phydev)
+{
+ int pos_peak_cycle = 0, pos_peak_in_phases = 0, pos_peak_phase = 0;
+ int neg_peak_cycle = 0, neg_peak_in_phases = 0, neg_peak_phase = 0;
+ int noise_margin = 20, time_margin = 89, jitter_var = 30;
+ int min_time_diff = 96, max_time_diff = 96 + time_margin;
+ bool fault = false, check_a = false, check_b = false;
+ int gain_idx = 0, pos_peak = 0, neg_peak = 0;
+ int pos_peak_time = 0, neg_peak_time = 0;
+ int pos_peak_in_phases_hybrid = 0;
+ int detect = -1;
+
+ gain_idx = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
+ PHYACC_ATTR_BANK_DSP, 151, 0);
+ /* read non-hybrid results */
+ pos_peak = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
+ PHYACC_ATTR_BANK_DSP, 153, 0);
+ neg_peak = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
+ PHYACC_ATTR_BANK_DSP, 154, 0);
+ pos_peak_time = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
+ PHYACC_ATTR_BANK_DSP, 156, 0);
+ neg_peak_time = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
+ PHYACC_ATTR_BANK_DSP, 157, 0);
+
+ pos_peak_cycle = (pos_peak_time >> 7) & 0x7F;
+ /* calculate non-hybrid values */
+ pos_peak_phase = pos_peak_time & 0x7F;
+ pos_peak_in_phases = (pos_peak_cycle * 96) + pos_peak_phase;
+ neg_peak_cycle = (neg_peak_time >> 7) & 0x7F;
+ neg_peak_phase = neg_peak_time & 0x7F;
+ neg_peak_in_phases = (neg_peak_cycle * 96) + neg_peak_phase;
+
+ /* process values */
+ check_a =
+ ((pos_peak_in_phases - neg_peak_in_phases) >= min_time_diff) &&
+ ((pos_peak_in_phases - neg_peak_in_phases) < max_time_diff) &&
+ pos_peak_in_phases_hybrid < pos_peak_in_phases &&
+ (pos_peak_in_phases_hybrid < (neg_peak_in_phases + jitter_var));
+ check_b =
+ ((neg_peak_in_phases - pos_peak_in_phases) >= min_time_diff) &&
+ ((neg_peak_in_phases - pos_peak_in_phases) < max_time_diff) &&
+ pos_peak_in_phases_hybrid < neg_peak_in_phases &&
+ (pos_peak_in_phases_hybrid < (pos_peak_in_phases + jitter_var));
+
+ if (pos_peak_in_phases > neg_peak_in_phases && check_a)
+ detect = 2;
+ else if ((neg_peak_in_phases > pos_peak_in_phases) && check_b)
+ detect = 1;
+
+ if (pos_peak > noise_margin && neg_peak > noise_margin &&
+ gain_idx >= 0) {
+ if (detect == 1 || detect == 2)
+ fault = true;
+ }
+
+ if (!fault)
+ detect = 0;
+
+ ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+ lan87xx_cable_test_report_trans(detect));
+
+ return 0;
+}
+
+static int lan87xx_cable_test_get_status(struct phy_device *phydev,
+ bool *finished)
+{
+ int rc = 0;
+
+ *finished = false;
+
+ /* check if cable diag was finished */
+ rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_DSP,
+ 90, 0);
+ if (rc < 0)
+ return rc;
+
+ if ((rc & 2) == 2) {
+ /* stop cable diag*/
+ rc = access_ereg(phydev, PHYACC_ATTR_MODE_WRITE,
+ PHYACC_ATTR_BANK_DSP,
+ 90, 0);
+ if (rc < 0)
+ return rc;
+
+ *finished = true;
+
+ return lan87xx_cable_test_report(phydev);
+ }
+
+ return 0;
+}
+
static struct phy_driver microchip_t1_phy_driver[] = {
{
.phy_id = 0x0007c150,
.phy_id_mask = 0xfffffff0,
.name = "Microchip LAN87xx T1",
+ .flags = PHY_POLL_CABLE_TEST,
.features = PHY_BASIC_T1_FEATURES,
@@ -241,6 +478,8 @@ static struct phy_driver microchip_t1_phy_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
+ .cable_test_start = lan87xx_cable_test_start,
+ .cable_test_get_status = lan87xx_cable_test_get_status,
}
};