diff options
Diffstat (limited to 'drivers/net/phy/motorcomm.c')
| -rw-r--r-- | drivers/net/phy/motorcomm.c | 118 |
1 files changed, 118 insertions, 0 deletions
diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c index 2fa5a90e073b..7a11fdb687cc 100644 --- a/drivers/net/phy/motorcomm.c +++ b/drivers/net/phy/motorcomm.c @@ -163,6 +163,10 @@ #define YT8521_CHIP_CONFIG_REG 0xA001 #define YT8521_CCR_SW_RST BIT(15) +#define YT8531_RGMII_LDO_VOL_MASK GENMASK(5, 4) +#define YT8531_LDO_VOL_3V3 0x0 +#define YT8531_LDO_VOL_1V8 0x2 + /* 1b0 disable 1.9ns rxc clock delay *default* * 1b1 enable 1.9ns rxc clock delay */ @@ -236,6 +240,12 @@ */ #define YTPHY_WCR_TYPE_PULSE BIT(0) +#define YTPHY_PAD_DRIVE_STRENGTH_REG 0xA010 +#define YT8531_RGMII_RXC_DS_MASK GENMASK(15, 13) +#define YT8531_RGMII_RXD_DS_HI_MASK BIT(12) /* Bit 2 of rxd_ds */ +#define YT8531_RGMII_RXD_DS_LOW_MASK GENMASK(5, 4) /* Bit 1/0 of rxd_ds */ +#define YT8531_RGMII_RX_DS_DEFAULT 0x3 + #define YTPHY_SYNCE_CFG_REG 0xA012 #define YT8521_SCR_SYNCE_ENABLE BIT(5) /* 1b0 output 25m clock @@ -835,6 +845,110 @@ static int ytphy_rgmii_clk_delay_config_with_lock(struct phy_device *phydev) } /** + * struct ytphy_ldo_vol_map - map a current value to a register value + * @vol: ldo voltage + * @ds: value in the register + * @cur: value in device configuration + */ +struct ytphy_ldo_vol_map { + u32 vol; + u32 ds; + u32 cur; +}; + +static const struct ytphy_ldo_vol_map yt8531_ldo_vol[] = { + {.vol = YT8531_LDO_VOL_1V8, .ds = 0, .cur = 1200}, + {.vol = YT8531_LDO_VOL_1V8, .ds = 1, .cur = 2100}, + {.vol = YT8531_LDO_VOL_1V8, .ds = 2, .cur = 2700}, + {.vol = YT8531_LDO_VOL_1V8, .ds = 3, .cur = 2910}, + {.vol = YT8531_LDO_VOL_1V8, .ds = 4, .cur = 3110}, + {.vol = YT8531_LDO_VOL_1V8, .ds = 5, .cur = 3600}, + {.vol = YT8531_LDO_VOL_1V8, .ds = 6, .cur = 3970}, + {.vol = YT8531_LDO_VOL_1V8, .ds = 7, .cur = 4350}, + {.vol = YT8531_LDO_VOL_3V3, .ds = 0, .cur = 3070}, + {.vol = YT8531_LDO_VOL_3V3, .ds = 1, .cur = 4080}, + {.vol = YT8531_LDO_VOL_3V3, .ds = 2, .cur = 4370}, + {.vol = YT8531_LDO_VOL_3V3, .ds = 3, .cur = 4680}, + {.vol = YT8531_LDO_VOL_3V3, .ds = 4, .cur = 5020}, + {.vol = YT8531_LDO_VOL_3V3, .ds = 5, .cur = 5450}, + {.vol = YT8531_LDO_VOL_3V3, .ds = 6, .cur = 5740}, + {.vol = YT8531_LDO_VOL_3V3, .ds = 7, .cur = 6140}, +}; + +static u32 yt8531_get_ldo_vol(struct phy_device *phydev) +{ + u32 val; + + val = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG); + val = FIELD_GET(YT8531_RGMII_LDO_VOL_MASK, val); + + return val <= YT8531_LDO_VOL_1V8 ? val : YT8531_LDO_VOL_1V8; +} + +static int yt8531_get_ds_map(struct phy_device *phydev, u32 cur) +{ + u32 vol; + int i; + + vol = yt8531_get_ldo_vol(phydev); + for (i = 0; i < ARRAY_SIZE(yt8531_ldo_vol); i++) { + if (yt8531_ldo_vol[i].vol == vol && yt8531_ldo_vol[i].cur == cur) + return yt8531_ldo_vol[i].ds; + } + + return -EINVAL; +} + +static int yt8531_set_ds(struct phy_device *phydev) +{ + struct device_node *node = phydev->mdio.dev.of_node; + u32 ds_field_low, ds_field_hi, val; + int ret, ds; + + /* set rgmii rx clk driver strength */ + if (!of_property_read_u32(node, "motorcomm,rx-clk-drv-microamp", &val)) { + ds = yt8531_get_ds_map(phydev, val); + if (ds < 0) + return dev_err_probe(&phydev->mdio.dev, ds, + "No matching current value was found.\n"); + } else { + ds = YT8531_RGMII_RX_DS_DEFAULT; + } + + ret = ytphy_modify_ext_with_lock(phydev, + YTPHY_PAD_DRIVE_STRENGTH_REG, + YT8531_RGMII_RXC_DS_MASK, + FIELD_PREP(YT8531_RGMII_RXC_DS_MASK, ds)); + if (ret < 0) + return ret; + + /* set rgmii rx data driver strength */ + if (!of_property_read_u32(node, "motorcomm,rx-data-drv-microamp", &val)) { + ds = yt8531_get_ds_map(phydev, val); + if (ds < 0) + return dev_err_probe(&phydev->mdio.dev, ds, + "No matching current value was found.\n"); + } else { + ds = YT8531_RGMII_RX_DS_DEFAULT; + } + + ds_field_hi = FIELD_GET(BIT(2), ds); + ds_field_hi = FIELD_PREP(YT8531_RGMII_RXD_DS_HI_MASK, ds_field_hi); + + ds_field_low = FIELD_GET(GENMASK(1, 0), ds); + ds_field_low = FIELD_PREP(YT8531_RGMII_RXD_DS_LOW_MASK, ds_field_low); + + ret = ytphy_modify_ext_with_lock(phydev, + YTPHY_PAD_DRIVE_STRENGTH_REG, + YT8531_RGMII_RXD_DS_LOW_MASK | YT8531_RGMII_RXD_DS_HI_MASK, + ds_field_low | ds_field_hi); + if (ret < 0) + return ret; + + return 0; +} + +/** * yt8521_probe() - read chip config then set suitable polling_mode * @phydev: a pointer to a &struct phy_device * @@ -1518,6 +1632,10 @@ static int yt8531_config_init(struct phy_device *phydev) return ret; } + ret = yt8531_set_ds(phydev); + if (ret < 0) + return ret; + return 0; } |