diff options
Diffstat (limited to 'drivers/net/phy/sfp.c')
-rw-r--r-- | drivers/net/phy/sfp.c | 228 |
1 files changed, 218 insertions, 10 deletions
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 9fc023e78dc5..4e47c8e8a529 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -18,6 +18,7 @@ #include <linux/workqueue.h> #include "mdio-i2c.h" +#include "sff.h" #include "sfp.h" #include "swphy.h" @@ -1369,6 +1370,114 @@ static void sfp_hwmon_exit(struct sfp *sfp) } #endif +static const struct sff_bitfield sfp_options[] = { + { + .mask = SFP_OPTIONS_HIGH_POWER_LEVEL, + .val = SFP_OPTIONS_HIGH_POWER_LEVEL, + .str = "hpl", + }, { + .mask = SFP_OPTIONS_PAGING_A2, + .val = SFP_OPTIONS_PAGING_A2, + .str = "paginga2", + }, { + .mask = SFP_OPTIONS_RETIMER, + .val = SFP_OPTIONS_RETIMER, + .str = "retimer", + }, { + .mask = SFP_OPTIONS_COOLED_XCVR, + .val = SFP_OPTIONS_COOLED_XCVR, + .str = "cooled", + }, { + .mask = SFP_OPTIONS_POWER_DECL, + .val = SFP_OPTIONS_POWER_DECL, + .str = "powerdecl", + }, { + .mask = SFP_OPTIONS_RX_LINEAR_OUT, + .val = SFP_OPTIONS_RX_LINEAR_OUT, + .str = "rxlinear", + }, { + .mask = SFP_OPTIONS_RX_DECISION_THRESH, + .val = SFP_OPTIONS_RX_DECISION_THRESH, + .str = "rxthresh", + }, { + .mask = SFP_OPTIONS_TUNABLE_TX, + .val = SFP_OPTIONS_TUNABLE_TX, + .str = "tunabletx", + }, { + .mask = SFP_OPTIONS_RATE_SELECT, + .val = SFP_OPTIONS_RATE_SELECT, + .str = "ratesel", + }, { + .mask = SFP_OPTIONS_TX_DISABLE, + .val = SFP_OPTIONS_TX_DISABLE, + .str = "txdisable", + }, { + .mask = SFP_OPTIONS_TX_FAULT, + .val = SFP_OPTIONS_TX_FAULT, + .str = "txfault", + }, { + .mask = SFP_OPTIONS_LOS_INVERTED, + .val = SFP_OPTIONS_LOS_INVERTED, + .str = "los-", + }, { + .mask = SFP_OPTIONS_LOS_NORMAL, + .val = SFP_OPTIONS_LOS_NORMAL, + .str = "los+", + }, { } +}; + +static const struct sff_bitfield diagmon[] = { + { + .mask = SFP_DIAGMON_DDM, + .val = SFP_DIAGMON_DDM, + .str = "ddm", + }, { + .mask = SFP_DIAGMON_INT_CAL, + .val = SFP_DIAGMON_INT_CAL, + .str = "intcal", + }, { + .mask = SFP_DIAGMON_EXT_CAL, + .val = SFP_DIAGMON_EXT_CAL, + .str = "extcal", + }, { + .mask = SFP_DIAGMON_RXPWR_AVG, + .val = SFP_DIAGMON_RXPWR_AVG, + .str = "rxpwravg", + }, { } +}; + +static const struct sff_bitfield sfp_enhopts[] = { + { + .mask = SFP_ENHOPTS_ALARMWARN, + .val = SFP_ENHOPTS_ALARMWARN, + .str = "alarmwarn", + }, { + .mask = SFP_ENHOPTS_SOFT_TX_DISABLE, + .val = SFP_ENHOPTS_SOFT_TX_DISABLE, + .str = "soft_tx_dis", + }, { + .mask = SFP_ENHOPTS_SOFT_TX_FAULT, + .val = SFP_ENHOPTS_SOFT_TX_FAULT, + .str = "soft_tx_fault", + }, { + .mask = SFP_ENHOPTS_SOFT_RX_LOS, + .val = SFP_ENHOPTS_SOFT_RX_LOS, + .str = "soft_rx_los", + }, { + .mask = SFP_ENHOPTS_SOFT_RATE_SELECT, + .val = SFP_ENHOPTS_SOFT_RATE_SELECT, + .str = "soft_rs", + }, { + .mask = SFP_ENHOPTS_APP_SELECT_SFF8079, + .val = SFP_ENHOPTS_APP_SELECT_SFF8079, + .str = "app_sel", + }, { + .mask = SFP_ENHOPTS_SOFT_RATE_SFF8431, + .val = SFP_ENHOPTS_SOFT_RATE_SFF8431, + .str = "soft_r8431", + }, { } +}; + /* Helpers */ static void sfp_module_tx_disable(struct sfp *sfp) { @@ -1718,6 +1827,110 @@ static int sfp_cotsworks_fixup_check(struct sfp *sfp, struct sfp_eeprom_id *id) return 0; } +static void sfp_print_module_info(struct sfp *sfp, const struct sfp_eeprom_id *id, bool cotsworks) +{ + unsigned int br_nom, br_min, br_max; + char date[9]; + char options[80]; + + /* Cotsworks also gets the date code wrong. */ + date[0] = id->ext.datecode[4 - 2 * cotsworks]; + date[1] = id->ext.datecode[5 - 2 * cotsworks]; + date[2] = '-'; + date[3] = id->ext.datecode[2 + 2 * cotsworks]; + date[4] = id->ext.datecode[3 + 2 * cotsworks]; + date[5] = '-'; + date[6] = id->ext.datecode[0]; + date[7] = id->ext.datecode[1]; + date[8] = '\0'; + + if (id->base.br_nominal == 0) { + br_min = br_nom = br_max = 0; + } else if (id->base.br_nominal == 255) { + br_nom = 250 * id->ext.br_max; + br_max = br_nom + br_nom * id->ext.br_min / 100; + br_min = br_nom - br_nom * id->ext.br_min / 100; + } else { + br_nom = id->base.br_nominal * 100; + br_min = br_nom - id->base.br_nominal * id->ext.br_min; + br_max = br_nom + id->base.br_nominal * id->ext.br_max; + } + + dev_info(sfp->dev, "module %.*s %.*s rev %.*s sn %.*s dc %s\n", + (int)sizeof(id->base.vendor_name), id->base.vendor_name, + (int)sizeof(id->base.vendor_pn), id->base.vendor_pn, + (int)sizeof(id->base.vendor_rev), id->base.vendor_rev, + (int)sizeof(id->ext.vendor_sn), id->ext.vendor_sn, date); + dev_info(sfp->dev, " %s connector, encoding %s, bitrate %u.%03u (%u.%03u-%u.%03u) Gbps\n", + sff_connector(id->base.connector), + sff_encoding(id->base.encoding), + br_nom / 1000, br_nom % 1000, + br_min / 1000, br_min % 1000, br_max / 1000, br_max % 1000); + dev_info(sfp->dev, " 1000BaseSX%c 1000BaseLX%c 1000BaseCX%c 1000BaseT%c 100BaseLX%c 100BaseFX%c BaseBX10%c BasePX%c\n", + id->base.e1000_base_sx ? '+' : '-', + id->base.e1000_base_lx ? '+' : '-', + id->base.e1000_base_cx ? '+' : '-', + id->base.e1000_base_t ? '+' : '-', + id->base.e100_base_lx ? '+' : '-', + id->base.e100_base_fx ? '+' : '-', + id->base.e_base_bx10 ? '+' : '-', + id->base.e_base_px ? '+' : '-'); + dev_info(sfp->dev, " 10GBaseSR%c 10GBaseLR%c 10GBaseLRM%c 10GBaseER%c\n", + id->base.e10g_base_sr ? '+' : '-', + id->base.e10g_base_lr ? '+' : '-', + id->base.e10g_base_lrm ? '+' : '-', + id->base.e10g_base_er ? '+' : '-'); + + if (!id->base.sfp_ct_passive && !id->base.sfp_ct_active && + !id->base.e1000_base_t) { + char len_9um[16], len_om[16]; + + dev_info(sfp->dev, " Wavelength %unm, fiber lengths:\n", + be16_to_cpup(&id->base.optical_wavelength)); + + if (id->base.link_len[0] == 255) + strcpy(len_9um, ">254km"); + else if (id->base.link_len[1] && id->base.link_len[1] != 255) + sprintf(len_9um, "%um", + id->base.link_len[1] * 100); + else if (id->base.link_len[0]) + sprintf(len_9um, "%ukm", id->base.link_len[0]); + else if (id->base.link_len[1] == 255) + strcpy(len_9um, ">25.4km"); + else + strcpy(len_9um, "unsupported"); + + dev_info(sfp->dev, " 9µm SM : %s\n", len_9um); + dev_info(sfp->dev, " 62.5µm MM OM1: %s\n", + sff_link_len(len_om, sizeof(len_om), + id->base.link_len[3], 10)); + dev_info(sfp->dev, " 50µm MM OM2: %s\n", + sff_link_len(len_om, sizeof(len_om), + id->base.link_len[2], 10)); + dev_info(sfp->dev, " 50µm MM OM3: %s\n", + sff_link_len(len_om, sizeof(len_om), + id->base.link_len[5], 10)); + dev_info(sfp->dev, " 50µm MM OM4: %s\n", + sff_link_len(len_om, sizeof(len_om), + id->base.link_len[4], 10)); + } else { + char len[16]; + dev_info(sfp->dev, " Copper length: %s\n", + sff_link_len(len, sizeof(len), + id->base.link_len[4], 1)); + } + + dev_info(sfp->dev, " Options: %s\n", + sff_bitfield(options, sizeof(options), sfp_options, + be16_to_cpu(id->ext.options))); + dev_info(sfp->dev, " Diagnostics: %s\n", + sff_bitfield(options, sizeof(options), diagmon, + id->ext.diagmon)); + dev_info(sfp->dev, " EnhOpts: %s\n", + sff_bitfield(options, sizeof(options), sfp_enhopts, + id->ext.enhopts)); +} + static int sfp_sm_mod_probe(struct sfp *sfp, bool report) { /* SFP module inserted - read I2C data */ @@ -1739,9 +1952,9 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report) return -EAGAIN; } - /* Cotsworks do not seem to update the checksums when they - * do the final programming with the final module part number, - * serial number and date code. + /* Cotsworks do not seem to update the checksums when they update the + * module part number, serial number and date code. They also format + * the date code incorrectly. */ cotsworks = !memcmp(id.base.vendor_name, "COTSWORKS ", 16); cotsworks_sfbg = !memcmp(id.base.vendor_pn, "SFBG", 4); @@ -1789,14 +2002,9 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report) } } - sfp->id = id; + sfp_print_module_info(sfp, &id, cotsworks); - dev_info(sfp->dev, "module %.*s %.*s rev %.*s sn %.*s dc %.*s\n", - (int)sizeof(id.base.vendor_name), id.base.vendor_name, - (int)sizeof(id.base.vendor_pn), id.base.vendor_pn, - (int)sizeof(id.base.vendor_rev), id.base.vendor_rev, - (int)sizeof(id.ext.vendor_sn), id.ext.vendor_sn, - (int)sizeof(id.ext.datecode), id.ext.datecode); + sfp->id = id; /* Check whether we support this module */ if (!sfp->type->module_supported(&id)) { |